diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..742f005
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,30 @@
+Copyright (c) 1992, 1993
+ The Regents of the University of California.  All rights reserved.
+
+This code is derived from software contributed to Berkeley by
+Christos Zoulas of Cornell University.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+3. Neither the name of the University nor the names of its contributors
+   may be used to endorse or promote products derived from this software
+   without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.
+
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..1496718
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,375 @@
+   * See also NetBSD changelog:
+	http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libedit
+
+2013-07-12 Jess Thrysoee
+
+   * version-info: 0:47:0
+
+   * all: sync with upstream source.
+
+   * examples/fileman.c, examples/tc1.c: fix pedantic compiler warnings
+
+2013-07-10 Jess Thrysoee
+
+   * version-info: 0:46:0
+
+   * configure.ac, src/el.c: ~/.editrc was never sourced on Linux.
+	On Linux issetugid is not available. When unable to determine if
+	the current process is tainted, we did not trust the HOME environment
+	variable and therefore could not load ~/.editrc.
+	Now instead use secure_getenv or a issetugid based implementation of secure_getenv.
+	Patch by Paolo Tosco.
+
+2013-06-11 Jess Thrysoee
+
+   * version-info: 0:45:0
+
+   * configure.ac: fix AM_CONDITIONAL regression for strlcpy, strlcat, vis,
+	unvis checks.
+
+2013-06-08 Jess Thrysoee
+
+   * version-info: 0:44:0
+
+   * configure.ac, src/Makefile.am: Prevent 'ranlib: has no symbols' build
+	warnings for systems that has strlcpy, strlcat, vis, unvis.
+
+2013-06-01 Jess Thrysoee
+
+   * version-info: 0:43:0
+
+   * all: sync with upstream source.
+
+2012-12-13 Jess Thrysoee
+
+   * version-info: 0:42:0
+
+   * all: sync with upstream source.
+
+2012-06-01 Jess Thrysoee
+
+   * version-info: 0:41:0
+
+   * all: sync with upstream source.
+
+2012-05-22 Jess Thrysoee
+
+   * version-info: 0:40:0
+
+   * all: sync with upstream source.
+
+2012-03-11 Jess Thrysoee
+
+   * version-info: 0:39:0
+
+   * all: sync with upstream source.
+
+2011-08-02 Jess Thrysoee
+
+   * version-info: 0:38:0
+
+   * all: sync with upstream source.
+
+2011-07-09 Jess Thrysoee
+
+   * version-info: 0:37:0
+
+   * all: sync with upstream source.
+
+2011-02-27 Jess Thrysoee
+
+   * version-info: 0:36:0
+
+   * all: sync with upstream source.
+
+2010-04-24 Jess Thrysoee
+
+   * version-info: 0:35:0
+
+   * all: sync with upstream source.
+	Now with UTF-8 support. To enable this run 'configure --enable-widec'.
+	For now an UTF-32 encoded wchar_t is required.
+	This requirement is met on NetBSD, Solaris and OS X for any UTF-8 locale,
+	and any system that define __STDC_ISO_10646__ (e.g. GNU libc on Linux).
+
+2009-09-23 Jess Thrysoee
+   * version-info: 0:34:0
+
+   * all: apply Apple patches from: 
+	http://opensource.apple.com/source/libedit/libedit-11/patches
+
+2009-09-05 Jess Thrysoee
+
+   * version-info: 0:33:0
+
+   * all: Use predefined macro __sun to identify Solaris
+
+   * src/el.c: Ignore comment lines in .editrc
+
+2009-07-23 Jess Thrysoee
+
+   * version-info: 0:32:0
+
+   * all: sync with upstream source.
+
+2009-06-10 Jess Thrysoee
+
+   * version-info: 0:31:0
+
+   * all: sync with upstream source.
+
+2009-05-03 Jess Thrysoee
+
+   * version-info: 0:30:0
+
+   * all: sync with upstream source.
+
+2009-04-05  Jess Thrysoee
+
+   * version-info: 0:29:0
+
+   * all: sync with upstream source.
+
+2009-01-11  Jess Thrysoee
+
+   * version-info: 0:28:0
+
+   * all: sync with upstream source. MAJOR.MINOR version is now 3.0.
+	This is due to NetBSD changing time_t and dev_t to 64 bits. It does
+	not really effect this package.
+
+   * configure.ac: Remove '--enable-debug' configure flag. The autoconf way
+	to control flags is by specifying them when running configure,
+	e.g. 'CFLAGS="-O0 -g" ./configure'
+
+2008-07-12  Jess Thrysoee
+
+   * version-info: 0:27:0
+
+   * configure.ac: Added '--enable-debug' configure flag, to produce debugging
+	information.
+
+   * examples/fileman.c: cast stat struct members, st_nlink and st_size,
+	appropriately (see also 'man 2 stat'). Patch by Alex Elder. 
+
+   * all: sync with upstream source. MINOR version is now 11.
+
+2007-08-31  Jess Thrysoee
+
+   * version-info: 0:26:0
+
+   * libedit.pc.in,Makefile.am,configure.ac,patches/extra_dist_list.sh:
+	Added pkg-config support for libedit. Patch by Masatake YAMATO.
+
+2007-08-13  Jess Thrysoee
+
+   * version-info: 0:25:0
+
+   * all: sync with upstream source.
+
+2007-03-02  Jess Thrysoee
+
+   * version-info: 0:24:0
+
+   * all: sync with upstream source.
+
+2006-10-22  Jess Thrysoee
+
+   * version-info: 0:23:0
+
+   * src/shlib_version: Upstream bumped minor version from 9 to 10.
+
+   * all: sync with upstream source. More readline functions.
+
+2006-10-22  Jess Thrysoee
+
+   * version-info: 0:22:0
+
+   * all: sync with upstream source.
+
+2006-08-29  Jess Thrysoee
+
+   * version-info: 0:21:0
+
+   * all: License cleanup. All 4-clause advertising BSD licenses has been
+	changed to the 3-clause version by upstream.
+
+   * src/fgetln.c: use src/tools/compat/fgetln.c instead of
+	othersrc/libexec/tnftpd/libnetbsd/fgetln.c
+
+2006-08-16  Jess Thrysoee
+
+   * version-info: 0:20:0
+
+   * all: sync with upstream source.
+
+2006-06-03  Jess Thrysoee
+
+   * version-info: 0:19:0
+
+   * COPYING: added global license file
+
+   * all: sync with upstream source.
+
+2006-02-13  Jess Thrysoee
+
+   * version-info: 0:18:0
+
+   * src/readline.c: Partial rl_getc_function support, patch by Kjeld Borch
+	Egevang.
+
+   * src/readline.c: Make write_history and read_history returncode readline
+	compatible. Upstream patch.
+
+2006-01-03  Jess Thrysoee
+
+   * version-info: 0:17:0
+
+   * patches/cvs_export.sh: strlcat.c and strlcpy.c was moved to
+	src/common/lib/libc/string in the upstream cvs repository.
+
+   * all: sync with upstream source. 
+
+2005-10-22  Jess Thrysoee
+
+   * version-info: 0:16:0
+
+   * patches/*.patch, configure.ac: define SCCSID, undef LIBC_SCCS. Remove
+	fourteen cosmetic patches.
+
+   * all: sync with upstream source. 
+
+2005-09-11  Jess Thrysoee
+
+   * version-info: 0:15:0
+
+   * src/Makefile.am: fix typo that meant generated files were distributes,
+	and make generated file targets dependent on the the 'makelist' input
+	files.
+
+   * all: sync with upstream source. This is just a manpage update
+
+2005-08-28  Jess Thrysoee
+
+   * version-info: 0:14:0
+
+   * src/sys.h: include config.h to avoid "redefinition of
+	`u_int32_t'". Patch by Norihiko Murase.
+
+   * src/search.c: explicitly include sys/types.h, because regex.h on
+	FreeBSD needs it and does not include it itself. Patch by Norihiko Murase.
+
+   * acinclude.m4: added EL_GETPW_R_DRAFT test and use AC_TRY_LINK instead
+	of AC_TRY_COMPILE. Suggested by Norihiko Murase.
+
+   * all: sync with upstream source. 
+
+2005-08-16  Jess Thrysoee
+
+   * version-info: 0:13:0
+
+   * all: sync with upstream source. 
+
+2005-08-05  Jess Thrysoee
+
+   * version-info: 0:12:0
+
+   * all: sync with upstream source. 
+
+2005-07-24  Jess Thrysoee
+
+   * version-info: 0:11:0
+
+   * histedit.h, histedit.c, readline.c, editline/readline.h: From
+	upstream; added remove_history().
+
+2005-07-07  Jess Thrysoee
+
+   * version-info: 0:10:0
+
+   * history.c, key.c: From upstream source; Fix memory leaks found by
+	valgrind.
+
+2005-06-28  Jess Thrysoee
+
+   * version-info: 0:9:0
+
+   * src/readline.c: getpwent_r is not POSIX, always use getpwent.
+	Reported by Gerrit P. Haase.
+
+   * src/Makefile.am: Added libtool -no-undefined. This is needed on Cygwin
+	to get a shared editline library. Should not affect other platforms.
+	Suggested by Gerrit P. Haase.
+
+2005-06-15  Jess Thrysoee
+
+   * version-info: 0:8:0
+
+   * all: sync with upstream source. 
+
+2005-06-01  Jess Thrysoee
+
+   * version-info: 0:7:0
+
+   * all: sync with upstream source.
+
+   * src/readline.c, src/filecomplete.c: Solaris use POSIX draft versions
+	of getpwent_r, getpwnam_r and getpwuid_r which return 'struct passwd *'.
+	Define HAVE_GETPW_R_POSIX if these functions are (non draft) POSIX
+	compatible. Patch by Julien Torrès.
+
+2005-05-28  Jess Thrysoee
+
+   * version-info: 0:6:0
+
+   * all: sync with upstream source.
+
+2005-03-11  Jess Thrysoee
+
+   * version-info: 0:5:0
+
+   * all: sync with upstream source.
+
+2004-12-07  Jess Thrysoee
+
+   * version-info: 0:4:0
+
+   * src/readline.c: d_namlen (in struct dirent) is not portable, always
+	use strlen. Patch by Scott Rankin.
+
+2004-11-27  Jess Thrysoee
+
+   * version-info: 0:3:0
+
+   * src/history.c: bug #26785 fixed upstream, removed local patch.
+
+2004-11-06  Jess Thrysoee
+
+   * version-info: 0:2:0
+
+   * all: sync with upstream source.
+
+   * doc/Makefile.am: If mdoc2man fails, remove empty file. Patch by 
+	Darren Tucker.
+
+2004-10-14  Jess Thrysoee
+
+   * version-info: 0:1:0
+
+   * doc/Makefile.am: 'make install' twice fails. Remove old links before
+	trying to link the man pages. Patch by Rick Richardson.
+
+2004-09-28  Jess Thrysoee
+
+   * version-info: 0:0:0
+
+   * acinclude.m4 configure.ac src/Makefile.am: Adhere to
+	LibTools library interface versions recommendation.
+	http://www.gnu.org/software/libtool/manual.html#SEC32
+
+   * doc/Makefile.am: name all manpage links as el_* (e.g. el_history.3)
+	to avoid conflicts.
+
+2004-09-08  Jess Thrysoee
+
+   * all: Initial package.
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..54caf7c
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,229 @@
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..6bc998f
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,9 @@
+
+AUTOMAKE_OPTIONS = foreign
+ACLOCAL_AMFLAGS = -I m4
+
+SUBDIRS = src examples doc
+
+EXTRA_DIST = libedit.pc.in
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libedit.pc
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..43e8bf5
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,860 @@
+# Makefile.in generated by automake 1.14 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/configure $(am__configure_deps) \
+	$(srcdir)/config.h.in $(srcdir)/libedit.pc.in COPYING \
+	ChangeLog INSTALL THANKS compile config.guess config.sub \
+	depcomp install-sh missing ltmain.sh
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = libedit.pc
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
+DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_VERSION = @LT_VERSION@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NROFF = @NROFF@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign
+ACLOCAL_AMFLAGS = -I m4
+SUBDIRS = src examples doc
+EXTRA_DIST = libedit.pc.in
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libedit.pc
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+libedit.pc: $(top_builddir)/config.status $(srcdir)/libedit.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-pkgconfigDATA
+
+.MAKE: $(am__recursive_targets) all install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am clean clean-cscope clean-generic \
+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
+	install-man install-pdf install-pdf-am install-pkgconfigDATA \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-pkgconfigDATA
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/THANKS b/THANKS
new file mode 100644
index 0000000..98ad22b
--- /dev/null
+++ b/THANKS
@@ -0,0 +1 @@
+Thanks to the NetBSD Project maintainers of libedit!
diff --git a/acinclude.m4 b/acinclude.m4
new file mode 100644
index 0000000..4a58189
--- /dev/null
+++ b/acinclude.m4
@@ -0,0 +1,85 @@
+
+dnl
+dnl read lib version from file (and trim trailing newline)
+dnl
+define([EL_RELEASE], [patsubst(esyscmd([. src/shlib_version; echo $major.$minor]), [
+])])
+
+dnl
+dnl read cvsexport timestamp from file (and trim trailing newline)
+dnl
+define([EL_TIMESTAMP], [patsubst(esyscmd([date +"%Y%m%d"]), [
+])])
+
+
+dnl
+dnl NetBSD use the -mdoc macro package for manpages, but e.g.
+dnl AIX and Solaris only support the -man package. 
+dnl
+AC_DEFUN([EL_MANTYPE],
+[
+   MANTYPE=
+   TestPath="/usr/bin${PATH_SEPARATOR}/usr/ucb"
+   AC_PATH_PROGS(NROFF, nroff awf, /bin/false, $TestPath)
+   if ${NROFF} -mdoc ${srcdir}/doc/editrc.5.roff >/dev/null 2>&1; then
+      MANTYPE=mdoc
+   fi
+   AC_SUBST(MANTYPE)
+])
+
+
+dnl
+dnl Check if getpwnam_r and getpwuid_r are POSIX.1 compatible
+dnl POSIX draft version returns 'struct passwd *' (used on Solaris)
+dnl NOTE: getpwent_r is not POSIX so we always use getpwent
+dnl
+AC_DEFUN([EL_GETPW_R_POSIX],
+[
+   AC_MSG_CHECKING([whether getpwnam_r and getpwuid_r are posix like])
+      # The prototype for the POSIX version is:
+      # int getpwnam_r(char *, struct passwd *, char *, size_t, struct passwd **)
+      # int getpwuid_r(uid_t, struct passwd *, char *, size_t, struct passwd **);
+   AC_TRY_LINK([#include <stdlib.h>
+                #include <sys/types.h>
+                #include <pwd.h>],
+               [getpwnam_r(NULL, NULL, NULL, (size_t)0, NULL);
+                getpwuid_r((uid_t)0, NULL, NULL, (size_t)0, NULL);],
+      [AC_DEFINE([HAVE_GETPW_R_POSIX], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are POSIX.1 compatible.]) 
+       AC_MSG_RESULT(yes)],
+      [AC_MSG_RESULT(no)])
+])
+
+AC_DEFUN([EL_GETPW_R_DRAFT],
+[
+   AC_MSG_CHECKING([whether getpwnam_r and getpwuid_r are posix _draft_ like])
+      # The prototype for the POSIX draft version is:
+      # struct passwd *getpwuid_r(uid_t, struct passwd *, char *, int);
+      # struct passwd *getpwnam_r(char *, struct passwd *,  char *, int);
+   AC_TRY_LINK([#include <stdlib.h>
+                #include <sys/types.h>
+                #include <pwd.h>],
+               [getpwnam_r(NULL, NULL, NULL, (size_t)0);
+                getpwuid_r((uid_t)0, NULL, NULL, (size_t)0);],
+      [AC_DEFINE([HAVE_GETPW_R_DRAFT], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are draft POSIX.1 versions.]) 
+       AC_MSG_RESULT(yes)],
+      [AC_MSG_RESULT(no)])
+])
+
+
+dnl
+dnl use option --enable-widec to turn on use of wide-character support
+dnl
+AC_DEFUN([EL_ENABLE_WIDEC],
+[
+   AC_MSG_CHECKING(if you want wide-character code)
+   AC_ARG_ENABLE(widec,
+      [  --enable-widec          compile with wide-char/UTF-8 code],
+      [with_widec=$enableval],
+      [with_widec=no])
+   AC_MSG_RESULT($with_widec)
+   if test "$with_widec" = yes ; then
+      AC_DEFINE(WIDECHAR, 1, [Define to 1 if you want wide-character code])
+   fi
+   AM_CONDITIONAL([WIDECHAR], [test "$with_widec" = yes])
+])
+
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..9e9eb84
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1155 @@
+# generated automatically by aclocal 1.14 -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.14'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.14], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.14])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
+m4_include([acinclude.m4])
diff --git a/compile b/compile
new file mode 100755
index 0000000..531136b
--- /dev/null
+++ b/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config.guess b/config.guess
new file mode 100755
index 0000000..b79252d
--- /dev/null
+++ b/config.guess
@@ -0,0 +1,1558 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
+
+timestamp='2013-06-10'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2013 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    cris:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    crisv32:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    frv:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:Linux:*:*)
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+	;;
+    or1k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-${LIBC}
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-${LIBC}
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	exit ;;
+    x86_64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		case $UNAME_PROCESSOR in
+		    i386) UNAME_PROCESSOR=x86_64 ;;
+		    powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		esac
+	    fi
+	fi
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
+esac
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+	"4"
+#else
+	""
+#endif
+	); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..8804525
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,297 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if the `closedir' function returns void instead of `int'. */
+#undef CLOSEDIR_VOID
+
+/* Define to 1 if you have the <curses.h> header file. */
+#undef HAVE_CURSES_H
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the `endpwent' function. */
+#undef HAVE_ENDPWENT
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the `fgetln' function. */
+#undef HAVE_FGETLN
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define to 1 if you have getpwnam_r and getpwuid_r that are draft POSIX.1
+   versions. */
+#undef HAVE_GETPW_R_DRAFT
+
+/* Define to 1 if you have getpwnam_r and getpwuid_r that are POSIX.1
+   compatible. */
+#undef HAVE_GETPW_R_POSIX
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `isascii' function. */
+#undef HAVE_ISASCII
+
+/* Define to 1 if you have the `issetugid' function. */
+#undef HAVE_ISSETUGID
+
+/* Define to 1 if you have the `curses' library (-lcurses). */
+#undef HAVE_LIBCURSES
+
+/* Define to 1 if you have the `ncurses' library (-lncurses). */
+#undef HAVE_LIBNCURSES
+
+/* Define to 1 if you have the `termcap' library (-ltermcap). */
+#undef HAVE_LIBTERMCAP
+
+/* Define to 1 if you have the `terminfo' library (-lterminfo). */
+#undef HAVE_LIBTERMINFO
+
+/* Define to 1 if you have the `termlib' library (-ltermlib). */
+#undef HAVE_LIBTERMLIB
+
+/* Define to 1 if you have the `tinfo' library (-ltinfo). */
+#undef HAVE_LIBTINFO
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <malloc.h> header file. */
+#undef HAVE_MALLOC_H
+
+/* Define to 1 if you have the `memchr' function. */
+#undef HAVE_MEMCHR
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the <ncurses.h> header file. */
+#undef HAVE_NCURSES_H
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the `regcomp' function. */
+#undef HAVE_REGCOMP
+
+/* Define to 1 if you have the `re_comp' function. */
+#undef HAVE_RE_COMP
+
+/* Define to 1 if you have the `secure_getenv' function. */
+#undef HAVE_SECURE_GETENV
+
+/* Define to 1 if `stat' has the bug that it succeeds when given the
+   zero-length file name argument. */
+#undef HAVE_STAT_EMPTY_STRING_BUG
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#undef HAVE_STRCASECMP
+
+/* Define to 1 if you have the `strchr' function. */
+#undef HAVE_STRCHR
+
+/* Define to 1 if you have the `strcspn' function. */
+#undef HAVE_STRCSPN
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the `strrchr' function. */
+#undef HAVE_STRRCHR
+
+/* Define to 1 if you have the `strstr' function. */
+#undef HAVE_STRSTR
+
+/* Define to 1 if you have the `strtol' function. */
+#undef HAVE_STRTOL
+
+/* Define to 1 if struct dirent has member d_namlen */
+#undef HAVE_STRUCT_DIRENT_D_NAMLEN
+
+/* Define to 1 if you have the `strunvis' function. */
+#undef HAVE_STRUNVIS
+
+/* Define to 1 if you have the `strvis' function. */
+#undef HAVE_STRVIS
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_DIR_H
+
+/* Define to 1 if you have the <sys/ioctl.h> header file. */
+#undef HAVE_SYS_IOCTL_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_NDIR_H
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the <termcap.h> header file. */
+#undef HAVE_TERMCAP_H
+
+/* Define to 1 if you have the <term.h> header file. */
+#undef HAVE_TERM_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if the system has the type `u_int32_t'. */
+#undef HAVE_U_INT32_T
+
+/* Define to 1 if you have the `vfork' function. */
+#undef HAVE_VFORK
+
+/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H
+
+/* Define to 1 if you have the `vis' function. */
+#undef HAVE_VIS
+
+/* Define to 1 if you have the `wcsdup' function. */
+#undef HAVE_WCSDUP
+
+/* Define to 1 if `fork' works. */
+#undef HAVE_WORKING_FORK
+
+/* Define to 1 if `vfork' works. */
+#undef HAVE_WORKING_VFORK
+
+/* Define to 1 if you have the `__secure_getenv' function. */
+#undef HAVE___SECURE_GETENV
+
+/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
+   slash. */
+#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#undef RETSIGTYPE
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Enable extensions on AIX 3, Interix.  */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them.  */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris.  */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop.  */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 if you want wide-character code */
+#undef WIDECHAR
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define as `fork' if `vfork' does not work. */
+#undef vfork
+
+
+#include "sys.h"
+#define SCCSID
+#undef LIBC_SCCS
+#define lint
+
diff --git a/config.sub b/config.sub
new file mode 100755
index 0000000..8b612ab
--- /dev/null
+++ b/config.sub
@@ -0,0 +1,1788 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
+
+timestamp='2013-04-24'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2013 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze*)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| aarch64 | aarch64_be \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
+	| ns16k | ns32k \
+	| open8 \
+	| or1k | or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pyramid \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| aarch64-* | aarch64_be-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pyramid-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze*)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i386-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or1k-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/configure b/configure
new file mode 100755
index 0000000..8d3cd37
--- /dev/null
+++ b/configure
@@ -0,0 +1,15733 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for libedit 3.1.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libedit'
+PACKAGE_TARNAME='libedit-20130712'
+PACKAGE_VERSION='3.1'
+PACKAGE_STRING='libedit 3.1'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
+ac_unique_file="src/strlcat.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+HAVE_UNVIS_FALSE
+HAVE_UNVIS_TRUE
+HAVE_VIS_FALSE
+HAVE_VIS_TRUE
+HAVE_STRLCAT_FALSE
+HAVE_STRLCAT_TRUE
+HAVE_STRLCPY_FALSE
+HAVE_STRLCPY_TRUE
+LIBOBJS
+WIDECHAR_FALSE
+WIDECHAR_TRUE
+MANTYPE
+NROFF
+LT_VERSION
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+EGREP
+GREP
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_silent_rules
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_widec
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures libedit 3.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root
+                          [DATAROOTDIR/doc/libedit-20130712]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of libedit 3.1:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-widec          compile with wide-char/UTF-8 code
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+libedit configure 3.1
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_member
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libedit $as_me 3.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+# features of Posix that are extensions to C (define _GNU_SOURCE)
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+  MINIX=yes
+else
+  MINIX=
+fi
+
+
+  if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#         define __EXTENSIONS__ 1
+          $ac_includes_default
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_safe_to_define___extensions__=yes
+else
+  ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+  test $ac_cv_safe_to_define___extensions__ = yes &&
+    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+
+am__api_version='1.14'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libedit-20130712'
+ VERSION='3.1'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+# libtool -version-info
+LT_VERSION=0:47:0
+
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+
+# Checks for programs.
+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5
+$as_echo_n "checking for $CC option to accept ISO C99... " >&6; }
+if ${ac_cv_prog_cc_c99+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c99=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdlib.h>
+#include <wchar.h>
+#include <stdio.h>
+
+// Check varargs macros.  These examples are taken from C99 6.10.3.5.
+#define debug(...) fprintf (stderr, __VA_ARGS__)
+#define showlist(...) puts (#__VA_ARGS__)
+#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__))
+static void
+test_varargs_macros (void)
+{
+  int x = 1234;
+  int y = 5678;
+  debug ("Flag");
+  debug ("X = %d\n", x);
+  showlist (The first, second, and third items.);
+  report (x>y, "x is %d but y is %d", x, y);
+}
+
+// Check long long types.
+#define BIG64 18446744073709551615ull
+#define BIG32 4294967295ul
+#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0)
+#if !BIG_OK
+  your preprocessor is broken;
+#endif
+#if BIG_OK
+#else
+  your preprocessor is broken;
+#endif
+static long long int bignum = -9223372036854775807LL;
+static unsigned long long int ubignum = BIG64;
+
+struct incomplete_array
+{
+  int datasize;
+  double data[];
+};
+
+struct named_init {
+  int number;
+  const wchar_t *name;
+  double average;
+};
+
+typedef const char *ccp;
+
+static inline int
+test_restrict (ccp restrict text)
+{
+  // See if C++-style comments work.
+  // Iterate through items via the restricted pointer.
+  // Also check for declarations in for loops.
+  for (unsigned int i = 0; *(text+i) != '\0'; ++i)
+    continue;
+  return 0;
+}
+
+// Check varargs and va_copy.
+static void
+test_varargs (const char *format, ...)
+{
+  va_list args;
+  va_start (args, format);
+  va_list args_copy;
+  va_copy (args_copy, args);
+
+  const char *str;
+  int number;
+  float fnumber;
+
+  while (*format)
+    {
+      switch (*format++)
+	{
+	case 's': // string
+	  str = va_arg (args_copy, const char *);
+	  break;
+	case 'd': // int
+	  number = va_arg (args_copy, int);
+	  break;
+	case 'f': // float
+	  fnumber = va_arg (args_copy, double);
+	  break;
+	default:
+	  break;
+	}
+    }
+  va_end (args_copy);
+  va_end (args);
+}
+
+int
+main ()
+{
+
+  // Check bool.
+  _Bool success = false;
+
+  // Check restrict.
+  if (test_restrict ("String literal") == 0)
+    success = true;
+  char *restrict newvar = "Another string";
+
+  // Check varargs.
+  test_varargs ("s, d' f .", "string", 65, 34.234);
+  test_varargs_macros ();
+
+  // Check flexible array members.
+  struct incomplete_array *ia =
+    malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10));
+  ia->datasize = 10;
+  for (int i = 0; i < ia->datasize; ++i)
+    ia->data[i] = i * 1.234;
+
+  // Check named initializers.
+  struct named_init ni = {
+    .number = 34,
+    .name = L"Test wide string",
+    .average = 543.34343,
+  };
+
+  ni.number = 58;
+
+  int dynamic_array[ni.number];
+  dynamic_array[ni.number - 1] = 543;
+
+  // work around unused variable warnings
+  return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x'
+	  || dynamic_array[ni.number - 1] != 543);
+
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c99=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c99" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c99" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c99"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5
+$as_echo "$ac_cv_prog_cc_c99" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c99" != xno; then :
+
+fi
+
+
+#AC_PROG_CC
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+
+   MANTYPE=
+   TestPath="/usr/bin${PATH_SEPARATOR}/usr/ucb"
+   for ac_prog in nroff awf
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_NROFF+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $NROFF in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_NROFF="$NROFF" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $TestPath
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_NROFF="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+NROFF=$ac_cv_path_NROFF
+if test -n "$NROFF"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NROFF" >&5
+$as_echo "$NROFF" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$NROFF" && break
+done
+test -n "$NROFF" || NROFF="/bin/false"
+
+   if ${NROFF} -mdoc ${srcdir}/doc/editrc.5.roff >/dev/null 2>&1; then
+      MANTYPE=mdoc
+   fi
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltinfo" >&5
+$as_echo_n "checking for tgetent in -ltinfo... " >&6; }
+if ${ac_cv_lib_tinfo_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltinfo  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_tinfo_tgetent=yes
+else
+  ac_cv_lib_tinfo_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tinfo_tgetent" >&5
+$as_echo "$ac_cv_lib_tinfo_tgetent" >&6; }
+if test "x$ac_cv_lib_tinfo_tgetent" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBTINFO 1
+_ACEOF
+
+  LIBS="-ltinfo $LIBS"
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lterminfo" >&5
+$as_echo_n "checking for tgetent in -lterminfo... " >&6; }
+if ${ac_cv_lib_terminfo_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lterminfo  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_terminfo_tgetent=yes
+else
+  ac_cv_lib_terminfo_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_terminfo_tgetent" >&5
+$as_echo "$ac_cv_lib_terminfo_tgetent" >&6; }
+if test "x$ac_cv_lib_terminfo_tgetent" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBTERMINFO 1
+_ACEOF
+
+  LIBS="-lterminfo $LIBS"
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermcap" >&5
+$as_echo_n "checking for tgetent in -ltermcap... " >&6; }
+if ${ac_cv_lib_termcap_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltermcap  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_termcap_tgetent=yes
+else
+  ac_cv_lib_termcap_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tgetent" >&5
+$as_echo "$ac_cv_lib_termcap_tgetent" >&6; }
+if test "x$ac_cv_lib_termcap_tgetent" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBTERMCAP 1
+_ACEOF
+
+  LIBS="-ltermcap $LIBS"
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermlib" >&5
+$as_echo_n "checking for tgetent in -ltermlib... " >&6; }
+if ${ac_cv_lib_termlib_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltermlib  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_termlib_tgetent=yes
+else
+  ac_cv_lib_termlib_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termlib_tgetent" >&5
+$as_echo "$ac_cv_lib_termlib_tgetent" >&6; }
+if test "x$ac_cv_lib_termlib_tgetent" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBTERMLIB 1
+_ACEOF
+
+  LIBS="-ltermlib $LIBS"
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lcurses" >&5
+$as_echo_n "checking for tgetent in -lcurses... " >&6; }
+if ${ac_cv_lib_curses_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_curses_tgetent=yes
+else
+  ac_cv_lib_curses_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_tgetent" >&5
+$as_echo "$ac_cv_lib_curses_tgetent" >&6; }
+if test "x$ac_cv_lib_curses_tgetent" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBCURSES 1
+_ACEOF
+
+  LIBS="-lcurses $LIBS"
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncurses" >&5
+$as_echo_n "checking for tgetent in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_tgetent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char tgetent ();
+int
+main ()
+{
+return tgetent ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncurses_tgetent=yes
+else
+  ac_cv_lib_ncurses_tgetent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tgetent" >&5
+$as_echo "$ac_cv_lib_ncurses_tgetent" >&6; }
+if test "x$ac_cv_lib_ncurses_tgetent" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBNCURSES 1
+_ACEOF
+
+  LIBS="-lncurses $LIBS"
+
+else
+  as_fn_error $? "libcurses or libncurses are required!" "$LINENO" 5
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+
+### use option --enable-widec to turn on use of wide-character support
+
+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if you want wide-character code" >&5
+$as_echo_n "checking if you want wide-character code... " >&6; }
+   # Check whether --enable-widec was given.
+if test "${enable_widec+set}" = set; then :
+  enableval=$enable_widec; with_widec=$enableval
+else
+  with_widec=no
+fi
+
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_widec" >&5
+$as_echo "$with_widec" >&6; }
+   if test "$with_widec" = yes ; then
+
+$as_echo "#define WIDECHAR 1" >>confdefs.h
+
+   fi
+    if test "$with_widec" = yes; then
+  WIDECHAR_TRUE=
+  WIDECHAR_FALSE='#'
+else
+  WIDECHAR_TRUE='#'
+  WIDECHAR_FALSE=
+fi
+
+
+
+# Checks for header files.
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
+  as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
+$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; }
+if eval \${$as_ac_Header+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <$ac_hdr>
+
+int
+main ()
+{
+if ((DIR *) 0)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_ac_Header=yes"
+else
+  eval "$as_ac_Header=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$as_ac_Header
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+_ACEOF
+
+ac_header_dirent=$ac_hdr; break
+fi
+
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dir; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' x; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5
+$as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; }
+if ${ac_cv_header_sys_wait_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+
+int
+main ()
+{
+  int s;
+  wait (&s);
+  s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_sys_wait_h=yes
+else
+  ac_cv_header_sys_wait_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5
+$as_echo "$ac_cv_header_sys_wait_h" >&6; }
+if test $ac_cv_header_sys_wait_h = yes; then
+
+$as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h
+
+fi
+
+for ac_header in fcntl.h limits.h malloc.h stdlib.h string.h sys/ioctl.h sys/param.h unistd.h curses.h ncurses.h sys/cdefs.h termcap.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+ac_fn_c_check_header_mongrel "$LINENO" "termios.h" "ac_cv_header_termios_h" "$ac_includes_default"
+if test "x$ac_cv_header_termios_h" = xyes; then :
+
+else
+  as_fn_error $? "termios.h is required!" "$LINENO" 5
+fi
+
+
+
+## include curses.h to prevent "Present But Cannot Be Compiled"
+for ac_header in term.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "term.h" "ac_cv_header_term_h" "#if HAVE_CURSES_H
+# include <curses.h>
+#elif HAVE_NCURSES_H
+# include <ncurses.h>
+#endif
+
+"
+if test "x$ac_cv_header_term_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_TERM_H 1
+_ACEOF
+
+fi
+
+done
+
+
+# Check for dirent.d_namlen field explicitly
+# (This is a bit more straightforward than, if not quite as portable as,
+# the recipe given by the autoconf maintainers.)
+ac_fn_c_check_member "$LINENO" "struct dirent" "d_namlen" "ac_cv_member_struct_dirent_d_namlen" "#if HAVE_DIRENT_H
+#include <dirent.h>
+#endif
+
+"
+if test "x$ac_cv_member_struct_dirent_d_namlen" = xyes; then :
+
+$as_echo "#define HAVE_STRUCT_DIRENT_D_NAMLEN 1" >>confdefs.h
+
+fi
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this sort of thing.  */
+  typedef int charset[2];
+  const charset cs = { 0, 0 };
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_const=yes
+else
+  ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "u_int32_t" "ac_cv_type_u_int32_t" "$ac_includes_default"
+if test "x$ac_cv_type_u_int32_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_U_INT32_T 1
+_ACEOF
+
+
+fi
+
+
+# Checks for library functions.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether closedir returns void" >&5
+$as_echo_n "checking whether closedir returns void... " >&6; }
+if ${ac_cv_func_closedir_void+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_closedir_void=yes
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header_dirent>
+#ifndef __cplusplus
+int closedir ();
+#endif
+
+int
+main ()
+{
+return closedir (opendir (".")) != 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_closedir_void=no
+else
+  ac_cv_func_closedir_void=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_closedir_void" >&5
+$as_echo "$ac_cv_func_closedir_void" >&6; }
+if test $ac_cv_func_closedir_void = yes; then
+
+$as_echo "#define CLOSEDIR_VOID 1" >>confdefs.h
+
+fi
+
+for ac_header in vfork.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default"
+if test "x$ac_cv_header_vfork_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_VFORK_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in fork vfork
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+if test "x$ac_cv_func_fork" = xyes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5
+$as_echo_n "checking for working fork... " >&6; }
+if ${ac_cv_func_fork_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_fork_works=cross
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+
+	  /* By Ruediger Kuhlmann. */
+	  return fork () < 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_fork_works=yes
+else
+  ac_cv_func_fork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5
+$as_echo "$ac_cv_func_fork_works" >&6; }
+
+else
+  ac_cv_func_fork_works=$ac_cv_func_fork
+fi
+if test "x$ac_cv_func_fork_works" = xcross; then
+  case $host in
+    *-*-amigaos* | *-*-msdosdjgpp*)
+      # Override, as these systems have only a dummy fork() stub
+      ac_cv_func_fork_works=no
+      ;;
+    *)
+      ac_cv_func_fork_works=yes
+      ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;}
+fi
+ac_cv_func_vfork_works=$ac_cv_func_vfork
+if test "x$ac_cv_func_vfork" = xyes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5
+$as_echo_n "checking for working vfork... " >&6; }
+if ${ac_cv_func_vfork_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_vfork_works=cross
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Thanks to Paul Eggert for this test.  */
+$ac_includes_default
+#include <sys/wait.h>
+#ifdef HAVE_VFORK_H
+# include <vfork.h>
+#endif
+/* On some sparc systems, changes by the child to local and incoming
+   argument registers are propagated back to the parent.  The compiler
+   is told about this with #include <vfork.h>, but some compilers
+   (e.g. gcc -O) don't grok <vfork.h>.  Test for this by using a
+   static variable whose address is put into a register that is
+   clobbered by the vfork.  */
+static void
+#ifdef __cplusplus
+sparc_address_test (int arg)
+# else
+sparc_address_test (arg) int arg;
+#endif
+{
+  static pid_t child;
+  if (!child) {
+    child = vfork ();
+    if (child < 0) {
+      perror ("vfork");
+      _exit(2);
+    }
+    if (!child) {
+      arg = getpid();
+      write(-1, "", 0);
+      _exit (arg);
+    }
+  }
+}
+
+int
+main ()
+{
+  pid_t parent = getpid ();
+  pid_t child;
+
+  sparc_address_test (0);
+
+  child = vfork ();
+
+  if (child == 0) {
+    /* Here is another test for sparc vfork register problems.  This
+       test uses lots of local variables, at least as many local
+       variables as main has allocated so far including compiler
+       temporaries.  4 locals are enough for gcc 1.40.3 on a Solaris
+       4.1.3 sparc, but we use 8 to be safe.  A buggy compiler should
+       reuse the register of parent for one of the local variables,
+       since it will think that parent can't possibly be used any more
+       in this routine.  Assigning to the local variable will thus
+       munge parent in the parent process.  */
+    pid_t
+      p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
+      p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
+    /* Convince the compiler that p..p7 are live; otherwise, it might
+       use the same hardware register for all 8 local variables.  */
+    if (p != p1 || p != p2 || p != p3 || p != p4
+	|| p != p5 || p != p6 || p != p7)
+      _exit(1);
+
+    /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent
+       from child file descriptors.  If the child closes a descriptor
+       before it execs or exits, this munges the parent's descriptor
+       as well.  Test for this by closing stdout in the child.  */
+    _exit(close(fileno(stdout)) != 0);
+  } else {
+    int status;
+    struct stat st;
+
+    while (wait(&status) != child)
+      ;
+    return (
+	 /* Was there some problem with vforking?  */
+	 child < 0
+
+	 /* Did the child fail?  (This shouldn't happen.)  */
+	 || status
+
+	 /* Did the vfork/compiler bug occur?  */
+	 || parent != getpid()
+
+	 /* Did the file descriptor bug occur?  */
+	 || fstat(fileno(stdout), &st) != 0
+	 );
+  }
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_vfork_works=yes
+else
+  ac_cv_func_vfork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5
+$as_echo "$ac_cv_func_vfork_works" >&6; }
+
+fi;
+if test "x$ac_cv_func_fork_works" = xcross; then
+  ac_cv_func_vfork_works=$ac_cv_func_vfork
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;}
+fi
+
+if test "x$ac_cv_func_vfork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h
+
+else
+
+$as_echo "#define vfork fork" >>confdefs.h
+
+fi
+if test "x$ac_cv_func_fork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h
+
+fi
+
+if test $ac_cv_c_compiler_gnu = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5
+$as_echo_n "checking whether $CC needs -traditional... " >&6; }
+if ${ac_cv_prog_gcc_traditional+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    ac_pattern="Autoconf.*'x'"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sgtty.h>
+Autoconf TIOCGETP
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+  ac_cv_prog_gcc_traditional=yes
+else
+  ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+  if test $ac_cv_prog_gcc_traditional = no; then
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <termio.h>
+Autoconf TCGETA
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "$ac_pattern" >/dev/null 2>&1; then :
+  ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5
+$as_echo "$ac_cv_prog_gcc_traditional" >&6; }
+  if test $ac_cv_prog_gcc_traditional = yes; then
+    CC="$CC -traditional"
+  fi
+fi
+
+## _AIX is offended by rpl_malloc and rpl_realloc
+#AC_FUNC_MALLOC
+#AC_FUNC_REALLOC
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if ${ac_cv_type_signal+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <signal.h>
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_type_signal=int
+else
+  ac_cv_type_signal=void
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5
+$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; }
+if ${ac_cv_func_lstat_dereferences_slashed_symlink+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f conftest.sym conftest.file
+echo >conftest.file
+if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_lstat_dereferences_slashed_symlink=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+struct stat sbuf;
+     /* Linux will dereference the symlink and fail, as required by POSIX.
+	That is better in the sense that it means we will not
+	have to compile and use the lstat wrapper.  */
+     return lstat ("conftest.sym/", &sbuf) == 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_lstat_dereferences_slashed_symlink=yes
+else
+  ac_cv_func_lstat_dereferences_slashed_symlink=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+else
+  # If the `ln -s' command failed, then we probably don't even
+  # have an lstat function.
+  ac_cv_func_lstat_dereferences_slashed_symlink=no
+fi
+rm -f conftest.sym conftest.file
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5
+$as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; }
+
+test $ac_cv_func_lstat_dereferences_slashed_symlink = yes &&
+
+cat >>confdefs.h <<_ACEOF
+#define LSTAT_FOLLOWS_SLASHED_SYMLINK 1
+_ACEOF
+
+
+if test "x$ac_cv_func_lstat_dereferences_slashed_symlink" = xno; then
+  case " $LIBOBJS " in
+  *" lstat.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS lstat.$ac_objext"
+ ;;
+esac
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5
+$as_echo_n "checking whether stat accepts an empty string... " >&6; }
+if ${ac_cv_func_stat_empty_string_bug+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_stat_empty_string_bug=yes
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+struct stat sbuf;
+  return stat ("", &sbuf) == 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_stat_empty_string_bug=no
+else
+  ac_cv_func_stat_empty_string_bug=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_stat_empty_string_bug" >&5
+$as_echo "$ac_cv_func_stat_empty_string_bug" >&6; }
+if test $ac_cv_func_stat_empty_string_bug = yes; then
+  case " $LIBOBJS " in
+  *" stat.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS stat.$ac_objext"
+ ;;
+esac
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STAT_EMPTY_STRING_BUG 1
+_ACEOF
+
+fi
+
+for ac_func in endpwent isascii memchr memset re_comp regcomp strcasecmp strchr strcspn strdup strerror strrchr strstr strtol issetugid wcsdup strlcpy strlcat fgetln vis strvis strunvis __secure_getenv secure_getenv
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# strlcpy
+ac_fn_c_check_func "$LINENO" "strlcpy" "ac_cv_func_strlcpy"
+if test "x$ac_cv_func_strlcpy" = xyes; then :
+  found_strlcpy=yes
+else
+  found_strlcpy=no
+fi
+
+ if test "x$found_strlcpy" = xyes; then
+  HAVE_STRLCPY_TRUE=
+  HAVE_STRLCPY_FALSE='#'
+else
+  HAVE_STRLCPY_TRUE='#'
+  HAVE_STRLCPY_FALSE=
+fi
+
+
+# strlcat
+ac_fn_c_check_func "$LINENO" "strlcat" "ac_cv_func_strlcat"
+if test "x$ac_cv_func_strlcat" = xyes; then :
+  found_strlcat=yes
+else
+  found_strlcat=no
+fi
+
+ if test "x$found_strlcat" = xyes; then
+  HAVE_STRLCAT_TRUE=
+  HAVE_STRLCAT_FALSE='#'
+else
+  HAVE_STRLCAT_TRUE='#'
+  HAVE_STRLCAT_FALSE=
+fi
+
+
+# vis
+ac_fn_c_check_func "$LINENO" "vis" "ac_cv_func_vis"
+if test "x$ac_cv_func_vis" = xyes; then :
+  found_vis=yes
+else
+  found_vis=no
+fi
+
+ if test "x$found_vis" = xyes; then
+  HAVE_VIS_TRUE=
+  HAVE_VIS_FALSE='#'
+else
+  HAVE_VIS_TRUE='#'
+  HAVE_VIS_FALSE=
+fi
+
+
+# unvis
+ac_fn_c_check_func "$LINENO" "unvis" "ac_cv_func_unvis"
+if test "x$ac_cv_func_unvis" = xyes; then :
+  found_unvis=yes
+else
+  found_unvis=no
+fi
+
+ if test "x$found_unvis" = xyes; then
+  HAVE_UNVIS_TRUE=
+  HAVE_UNVIS_FALSE='#'
+else
+  HAVE_UNVIS_TRUE='#'
+  HAVE_UNVIS_FALSE=
+fi
+
+
+
+
+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getpwnam_r and getpwuid_r are posix like" >&5
+$as_echo_n "checking whether getpwnam_r and getpwuid_r are posix like... " >&6; }
+      # The prototype for the POSIX version is:
+      # int getpwnam_r(char *, struct passwd *, char *, size_t, struct passwd **)
+      # int getpwuid_r(uid_t, struct passwd *, char *, size_t, struct passwd **);
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+                #include <sys/types.h>
+                #include <pwd.h>
+int
+main ()
+{
+getpwnam_r(NULL, NULL, NULL, (size_t)0, NULL);
+                getpwuid_r((uid_t)0, NULL, NULL, (size_t)0, NULL);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+$as_echo "#define HAVE_GETPW_R_POSIX 1" >>confdefs.h
+
+       { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+
+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getpwnam_r and getpwuid_r are posix _draft_ like" >&5
+$as_echo_n "checking whether getpwnam_r and getpwuid_r are posix _draft_ like... " >&6; }
+      # The prototype for the POSIX draft version is:
+      # struct passwd *getpwuid_r(uid_t, struct passwd *, char *, int);
+      # struct passwd *getpwnam_r(char *, struct passwd *,  char *, int);
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+                #include <sys/types.h>
+                #include <pwd.h>
+int
+main ()
+{
+getpwnam_r(NULL, NULL, NULL, (size_t)0);
+                getpwuid_r((uid_t)0, NULL, NULL, (size_t)0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+$as_echo "#define HAVE_GETPW_R_DRAFT 1" >>confdefs.h
+
+       { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+
+
+
+
+ac_config_files="$ac_config_files Makefile libedit.pc src/Makefile doc/Makefile examples/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${WIDECHAR_TRUE}" && test -z "${WIDECHAR_FALSE}"; then
+  as_fn_error $? "conditional \"WIDECHAR\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_STRLCPY_TRUE}" && test -z "${HAVE_STRLCPY_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_STRLCPY\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_STRLCAT_TRUE}" && test -z "${HAVE_STRLCAT_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_STRLCAT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_VIS_TRUE}" && test -z "${HAVE_VIS_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_VIS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_UNVIS_TRUE}" && test -z "${HAVE_UNVIS_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_UNVIS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libedit $as_me 3.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libedit config.status 3.1
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "libedit.pc") CONFIG_FILES="$CONFIG_FILES libedit.pc" ;;
+    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+    "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..5e33526
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,146 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+#
+# Compile with debug symbols:
+#    CFLAGS="-ggdb -pedandic -O0" ./configure
+#    CFLAGS="-ggdb -Wall -Wextra -pedantic -O0" ./configure
+#
+# Use libtool (glibtool on OSX) to debug:
+#
+#    libtool --mode=execute gdb examples/tc1
+# 
+# Run valgrind like this, but note
+# http://invisible-island.net/ncurses/ncurses.faq.html#config_leaks.
+#
+#    libtool --mode=execute valgrind --leak-check=full examples/tc1
+#
+# A valgrind suppressions file for ncurses is available at 
+# http://www.opensource.apple.com/source/ncurses/ncurses-27/ncurses/misc/ncurses.supp
+#
+#    libtool --mode=execute valgrind --suppressions=ncurses.supp.txt --leak-check=full examples/tc1
+#
+# Verbose output can be enabled with
+#    "./configure --disable-silent-rules" or "make V=1"
+#
+
+AC_INIT(libedit, [EL_RELEASE],, libedit-[EL_TIMESTAMP])
+AC_CONFIG_MACRO_DIR([m4])
+AC_CONFIG_SRCDIR([src/strlcat.c])
+AC_CONFIG_HEADER([config.h])
+
+# features of Posix that are extensions to C (define _GNU_SOURCE)
+AC_USE_SYSTEM_EXTENSIONS
+
+AM_INIT_AUTOMAKE
+AC_PROG_LIBTOOL
+
+# libtool -version-info
+AC_SUBST(LT_VERSION, [0:47:0])
+
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+
+# Checks for programs.
+AC_PROG_CC_C99
+#AC_PROG_CC
+AC_PROG_LN_S
+AC_PROG_AWK
+EL_MANTYPE
+
+
+AC_CHECK_LIB(tinfo, tgetent,,
+  [AC_CHECK_LIB(terminfo, tgetent,,
+    [AC_CHECK_LIB(termcap, tgetent,,
+       [AC_CHECK_LIB(termlib, tgetent,,
+           [AC_CHECK_LIB(curses, tgetent,,
+               [AC_CHECK_LIB(ncurses, tgetent,,
+                   [AC_MSG_ERROR([libcurses or libncurses are required!])]
+               )]
+           )]
+       )]
+    )]
+  )]
+)
+
+
+### use option --enable-widec to turn on use of wide-character support
+EL_ENABLE_WIDEC
+
+# Checks for header files.
+AC_HEADER_DIRENT
+AC_HEADER_STDC
+AC_HEADER_SYS_WAIT
+AC_CHECK_HEADERS([fcntl.h limits.h malloc.h stdlib.h string.h sys/ioctl.h sys/param.h unistd.h curses.h ncurses.h sys/cdefs.h termcap.h])
+
+AC_CHECK_HEADER([termios.h], [], [AC_MSG_ERROR([termios.h is required!])],[])
+
+## include curses.h to prevent "Present But Cannot Be Compiled"
+AC_CHECK_HEADERS([term.h],,,
+[[#if HAVE_CURSES_H
+# include <curses.h>
+#elif HAVE_NCURSES_H
+# include <ncurses.h>
+#endif
+]])
+
+# Check for dirent.d_namlen field explicitly
+# (This is a bit more straightforward than, if not quite as portable as,
+# the recipe given by the autoconf maintainers.)
+AC_CHECK_MEMBER(struct dirent.d_namlen,
+AC_DEFINE([HAVE_STRUCT_DIRENT_D_NAMLEN],[1],
+[Define to 1 if struct dirent has member d_namlen]),,
+[#if HAVE_DIRENT_H
+#include <dirent.h>
+#endif
+])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+AC_CHECK_TYPES([u_int32_t])
+
+# Checks for library functions.
+AC_FUNC_CLOSEDIR_VOID
+AC_FUNC_FORK
+AC_PROG_GCC_TRADITIONAL
+## _AIX is offended by rpl_malloc and rpl_realloc
+#AC_FUNC_MALLOC
+#AC_FUNC_REALLOC
+AC_TYPE_SIGNAL
+AC_FUNC_STAT
+AC_CHECK_FUNCS([endpwent isascii memchr memset re_comp regcomp strcasecmp strchr strcspn strdup strerror strrchr strstr strtol issetugid wcsdup strlcpy strlcat fgetln vis strvis strunvis __secure_getenv secure_getenv])
+
+# strlcpy
+AC_CHECK_FUNC(strlcpy, found_strlcpy=yes, found_strlcpy=no)
+AM_CONDITIONAL(HAVE_STRLCPY, [test "x$found_strlcpy" = xyes])
+
+# strlcat
+AC_CHECK_FUNC(strlcat, found_strlcat=yes, found_strlcat=no)
+AM_CONDITIONAL(HAVE_STRLCAT, [test "x$found_strlcat" = xyes])
+
+# vis
+AC_CHECK_FUNC(vis, found_vis=yes, found_vis=no)
+AM_CONDITIONAL(HAVE_VIS, [test "x$found_vis" = xyes])
+
+# unvis
+AC_CHECK_FUNC(unvis, found_unvis=yes, found_unvis=no)
+AM_CONDITIONAL(HAVE_UNVIS, [test "x$found_unvis" = xyes])
+
+
+EL_GETPW_R_POSIX
+EL_GETPW_R_DRAFT
+
+
+AH_BOTTOM([
+#include "sys.h"
+#define SCCSID
+#undef LIBC_SCCS
+#define lint
+])
+
+AC_CONFIG_FILES([Makefile
+                 libedit.pc
+                 src/Makefile
+                 doc/Makefile
+                 examples/Makefile])
+AC_OUTPUT
diff --git a/depcomp b/depcomp
new file mode 100755
index 0000000..4ebd5b3
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/doc/Makefile.am b/doc/Makefile.am
new file mode 100644
index 0000000..dfdf841
--- /dev/null
+++ b/doc/Makefile.am
@@ -0,0 +1,33 @@
+
+EL_MANS = editline.3 editrc.5
+
+man_MANS = $(EL_MANS)
+
+EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
+	       el_push.3 el_parse.3 el_set.3 el_get.3 el_source.3 \
+	       el_resize.3 el_line.3 el_insertstr.3 el_deletestr.3 \
+	       el_history_init.3 el_history_end.3 el_history.3 el_tok_init.3 \
+	       el_tok_end.3 el_tok_reset.3 el_tok_line.3 el_tok_str.3
+
+install-data-hook: $(EL_MAN_LINKS)
+
+$(EL_MAN_LINKS):
+	(cd $(DESTDIR)$(man3dir) && rm -f $@ && $(LN_S) editline.3 $@)
+
+$(EL_MANS):
+	@if test "$(MANTYPE)" = "mdoc"; then\
+	   cp $(srcdir)/$@.roff $@;\
+        else\
+	   $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
+	fi; 
+
+uninstall-local: 
+	(cd $(DESTDIR)$(man3dir) && rm -f $(EL_MAN_LINKS))
+
+CLEANFILES = $(EL_MANS)
+EXTRA_DIST = editline.3.roff editrc.5.roff mdoc2man.awk
+
+changelog.txt: ../ChangeLog
+	@sed 's/@/ (at)/g; s/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g;' $(srcdir)/$< > $@;
+
+
diff --git a/doc/Makefile.in b/doc/Makefile.in
new file mode 100644
index 0000000..0c3af53
--- /dev/null
+++ b/doc/Makefile.in
@@ -0,0 +1,578 @@
+# Makefile.in generated by automake 1.14 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man3dir = $(mandir)/man3
+am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"
+man5dir = $(mandir)/man5
+MANS = $(man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_VERSION = @LT_VERSION@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NROFF = @NROFF@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EL_MANS = editline.3 editrc.5
+man_MANS = $(EL_MANS)
+EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
+	       el_push.3 el_parse.3 el_set.3 el_get.3 el_source.3 \
+	       el_resize.3 el_line.3 el_insertstr.3 el_deletestr.3 \
+	       el_history_init.3 el_history_end.3 el_history.3 el_tok_init.3 \
+	       el_tok_end.3 el_tok_reset.3 el_tok_line.3 el_tok_str.3
+
+CLEANFILES = $(EL_MANS)
+EXTRA_DIST = editline.3.roff editrc.5.roff mdoc2man.awk
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man3: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man3:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man3dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.3[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+install-man5: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man5dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.5[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man5:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man5dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.5[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man3 install-man5
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-local uninstall-man
+
+uninstall-man: uninstall-man3 uninstall-man5
+
+.MAKE: install-am install-data-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-data-hook install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-man3 install-man5 \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am uninstall-local uninstall-man \
+	uninstall-man3 uninstall-man5
+
+
+install-data-hook: $(EL_MAN_LINKS)
+
+$(EL_MAN_LINKS):
+	(cd $(DESTDIR)$(man3dir) && rm -f $@ && $(LN_S) editline.3 $@)
+
+$(EL_MANS):
+	@if test "$(MANTYPE)" = "mdoc"; then\
+	   cp $(srcdir)/$@.roff $@;\
+        else\
+	   $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
+	fi; 
+
+uninstall-local: 
+	(cd $(DESTDIR)$(man3dir) && rm -f $(EL_MAN_LINKS))
+
+changelog.txt: ../ChangeLog
+	@sed 's/@/ (at)/g; s/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g;' $(srcdir)/$< > $@;
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/editline.3.roff b/doc/editline.3.roff
new file mode 100644
index 0000000..357ea16
--- /dev/null
+++ b/doc/editline.3.roff
@@ -0,0 +1,913 @@
+.\"	$NetBSD: editline.3,v 1.80 2013/07/12 17:48:29 christos Exp $
+.\"
+.\" Copyright (c) 1997-2013 The NetBSD Foundation, Inc.
+.\" All rights reserved.
+.\"
+.\" This file was contributed to The NetBSD Foundation by Luke Mewburn.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd July 12, 2013
+.Dt EDITLINE 3
+.Os
+.Sh NAME
+.Nm editline ,
+.Nm el_init ,
+.Nm el_init_fd ,
+.Nm el_end ,
+.Nm el_reset ,
+.Nm el_gets ,
+.Nm el_wgets ,
+.Nm el_getc ,
+.Nm el_wgetc ,
+.Nm el_push ,
+.Nm el_wpush ,
+.Nm el_parse ,
+.Nm el_wparse ,
+.Nm el_set ,
+.Nm el_wset ,
+.Nm el_get ,
+.Nm el_wget ,
+.Nm el_source ,
+.Nm el_resize ,
+.Nm el_cursor ,
+.Nm el_line ,
+.Nm el_wline ,
+.Nm el_insertstr ,
+.Nm el_winsertstr ,
+.Nm el_deletestr ,
+.Nm el_wdeletestr ,
+.Nm history_init ,
+.Nm history_winit ,
+.Nm history_end ,
+.Nm history_wend ,
+.Nm history ,
+.Nm history_w ,
+.Nm tok_init ,
+.Nm tok_winit ,
+.Nm tok_end ,
+.Nm tok_wend ,
+.Nm tok_reset ,
+.Nm tok_wreset ,
+.Nm tok_line ,
+.Nm tok_wline ,
+.Nm tok_str
+.Nm tok_wstr
+.Nd line editor, history and tokenization functions
+.Sh LIBRARY
+.Lb libedit
+.Sh SYNOPSIS
+.In histedit.h
+.Ft EditLine *
+.Fn el_init "const char *prog" "FILE *fin" "FILE *fout" "FILE *ferr"
+.Ft EditLine *
+.Fn el_init_fd "const char *prog" "FILE *fin" "FILE *fout" "FILE *ferr" "int fdin" "int fdout" "int fderr"
+.Ft void
+.Fn el_end "EditLine *e"
+.Ft void
+.Fn el_reset "EditLine *e"
+.Ft const char *
+.Fn el_gets "EditLine *e" "int *count"
+.Ft const wchar_t *
+.Fn el_wgets "EditLine *e" "int *count"
+.Ft int
+.Fn el_getc "EditLine *e" "char *ch"
+.Ft int
+.Fn el_wgetc "EditLine *e" "wchar_t *ch"
+.Ft void
+.Fn el_push "EditLine *e" "const char *str"
+.Ft void
+.Fn el_wpush "EditLine *e" "const wchar_t *str"
+.Ft int
+.Fn el_parse "EditLine *e" "int argc" "const char *argv[]"
+.Ft int
+.Fn el_wparse "EditLine *e" "int argc" "const wchar_t *argv[]"
+.Ft int
+.Fn el_set "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_wset "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_get "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_wget "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_source "EditLine *e" "const char *file"
+.Ft void
+.Fn el_resize "EditLine *e"
+.Fn int
+.Fn el_cursor "EditLine *e" "int count"
+.Ft const LineInfo *
+.Fn el_line "EditLine *e"
+.Ft const LineInfoW *
+.Fn el_wline "EditLine *e"
+.Ft int
+.Fn el_insertstr "EditLine *e" "const char *str"
+.Ft int
+.Fn el_winsertstr "EditLine *e" "const wchar_t *str"
+.Ft void
+.Fn el_deletestr "EditLine *e" "int count"
+.Ft void
+.Fn el_wdeletestr "EditLine *e" "int count"
+.Ft History *
+.Fn history_init
+.Ft HistoryW *
+.Fn history_winit
+.Ft void
+.Fn history_end "History *h"
+.Ft void
+.Fn history_wend "HistoryW *h"
+.Ft int
+.Fn history "History *h" "HistEvent *ev" "int op" "..."
+.Ft int
+.Fn history_w "HistoryW *h" "HistEventW *ev" "int op" "..."
+.Ft Tokenizer *
+.Fn tok_init "const char *IFS"
+.Ft TokenizerW *
+.Fn tok_winit "const wchar_t *IFS"
+.Ft void
+.Fn tok_end "Tokenizer *t"
+.Ft void
+.Fn tok_wend "TokenizerW *t"
+.Ft void
+.Fn tok_reset "Tokenizer *t"
+.Ft void
+.Fn tok_wreset "TokenizerW *t"
+.Ft int
+.Fn tok_line "Tokenizer *t" "const LineInfo *li" "int *argc" "const char **argv[]" "int *cursorc" "int *cursoro"
+.Ft int
+.Fn tok_wline "TokenizerW *t" "const LineInfoW *li" "int *argc" "const wchar_t **argv[]" "int *cursorc" "int *cursoro"
+.Ft int
+.Fn tok_str "Tokenizer *t" "const char *str" "int *argc" "const char **argv[]"
+.Ft int
+.Fn tok_wstr "TokenizerW *t" "const wchar_t *str" "int *argc" "const wchar_t **argv[]"
+.Sh DESCRIPTION
+The
+.Nm
+library provides generic line editing, history and tokenization functions,
+similar to those found in
+.Xr sh 1 .
+.Pp
+These functions are available in the
+.Nm libedit
+library (which needs the
+.Nm libtermcap
+library).
+Programs should be linked with
+.Fl ledit ltermcap .
+.Sh LINE EDITING FUNCTIONS
+The line editing functions use a common data structure,
+.Fa EditLine ,
+which is created by
+.Fn el_init
+or
+.Fn el_init_fd
+and freed by
+.Fn el_end .
+.Pp
+The wide-character functions behave the same way as their narrow
+counterparts.
+.Pp
+The following functions are available:
+.Bl -tag -width 4n
+.It Fn el_init
+Initialise the line editor, and return a data structure
+to be used by all other line editing functions.
+.Fa prog
+is the name of the invoking program, used when reading the
+.Xr editrc 5
+file to determine which settings to use.
+.Fa fin ,
+.Fa fout
+and
+.Fa ferr
+are the input, output, and error streams (respectively) to use.
+In this documentation, references to
+.Dq the tty
+are actually to this input/output stream combination.
+.It Fn el_init_fd
+Like
+.Fn el_init
+but allows specifying file descriptors for the
+.Xr stdio 3
+corresponding streams, in case those were created with
+.Xr funopen 3 .
+.It Fn el_end
+Clean up and finish with
+.Fa e ,
+assumed to have been created with
+.Fn el_init
+or
+.Fn el_init_fd .
+.It Fn el_reset
+Reset the tty and the parser.
+This should be called after an error which may have upset the tty's
+state.
+.It Fn el_gets
+Read a line from the tty.
+.Fa count
+is modified to contain the number of characters read.
+Returns the line read if successful, or
+.Dv NULL
+if no characters were read or if an error occurred.
+If an error occurred,
+.Fa count
+is set to \-1 and
+.Dv errno
+contains the error code that caused it.
+The return value may not remain valid across calls to
+.Fn el_gets
+and must be copied if the data is to be retained.
+.It Fn el_getc
+Read a character from the tty.
+.Fa ch
+is modified to contain the character read.
+Returns the number of characters read if successful, \-1 otherwise,
+in which case
+.Dv errno
+can be inspected for the cause.
+.It Fn el_push
+Pushes
+.Fa str
+back onto the input stream.
+This is used by the macro expansion mechanism.
+Refer to the description of
+.Ic bind
+.Fl s
+in
+.Xr editrc 5
+for more information.
+.It Fn el_parse
+Parses the
+.Fa argv
+array (which is
+.Fa argc
+elements in size)
+to execute builtin
+.Nm
+commands.
+If the command is prefixed with
+.Dq prog :
+then
+.Fn el_parse
+will only execute the command if
+.Dq prog
+matches the
+.Fa prog
+argument supplied to
+.Fn el_init .
+The return value is
+\-1 if the command is unknown,
+0 if there was no error or
+.Dq prog
+didn't match, or
+1 if the command returned an error.
+Refer to
+.Xr editrc 5
+for more information.
+.It Fn el_set
+Set
+.Nm
+parameters.
+.Fa op
+determines which parameter to set, and each operation has its
+own parameter list.
+.Pp
+The following values for
+.Fa op
+are supported, along with the required argument list:
+.Bl -tag -width 4n
+.It Dv EL_PROMPT , Fa "char *(*f)(EditLine *)"
+Define prompt printing function as
+.Fa f ,
+which is to return a string that contains the prompt.
+.It Dv EL_PROMPT_ESC , Fa "char *(*f)(EditLine *)" , Fa "char c"
+Same as
+.Dv EL_PROMPT ,
+but the
+.Fa c
+argument indicates the start/stop literal prompt character.
+.Pp
+If a start/stop literal character is found in the prompt, the
+character itself
+is not printed, but characters after it are printed directly to the
+terminal without affecting the state of the current line.
+A subsequent second start/stop literal character ends this behavior.
+This is typically used to embed literal escape sequences that change the
+color/style of the terminal in the prompt.
+.Dv 0
+unsets it.
+.It Dv EL_REFRESH
+Re-display the current line on the next terminal line.
+.It Dv EL_RPROMPT , Fa "char *(*f)(EditLine *)"
+Define right side prompt printing function as
+.Fa f ,
+which is to return a string that contains the prompt.
+.It Dv EL_RPROMPT_ESC , Fa "char *(*f)(EditLine *)" , Fa "char c"
+Define the right prompt printing function but with a literal escape character.
+.It Dv EL_TERMINAL , Fa "const char *type"
+Define terminal type of the tty to be
+.Fa type ,
+or to
+.Ev TERM
+if
+.Fa type
+is
+.Dv NULL .
+.It Dv EL_EDITOR , Fa "const char *mode"
+Set editing mode to
+.Fa mode ,
+which must be one of
+.Dq emacs
+or
+.Dq vi .
+.It Dv EL_SIGNAL , Fa "int flag"
+If
+.Fa flag
+is non-zero,
+.Nm
+will install its own signal handler for the following signals when
+reading command input:
+.Dv SIGCONT ,
+.Dv SIGHUP ,
+.Dv SIGINT ,
+.Dv SIGQUIT ,
+.Dv SIGSTOP ,
+.Dv SIGTERM ,
+.Dv SIGTSTP ,
+and
+.Dv SIGWINCH .
+Otherwise, the current signal handlers will be used.
+.It Dv EL_BIND , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic bind
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_ECHOTC , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic echotc
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_SETTC , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic settc
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_SETTY , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic setty
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_TELLTC , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic telltc
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_ADDFN , Fa "const char *name" , Fa "const char *help" , \
+Fa "unsigned char (*func)(EditLine *e, int ch)"
+Add a user defined function,
+.Fn func ,
+referred to as
+.Fa name
+which is invoked when a key which is bound to
+.Fa name
+is entered.
+.Fa help
+is a description of
+.Fa name .
+At invocation time,
+.Fa ch
+is the key which caused the invocation.
+The return value of
+.Fn func
+should be one of:
+.Bl -tag -width "CC_REDISPLAY"
+.It Dv CC_NORM
+Add a normal character.
+.It Dv CC_NEWLINE
+End of line was entered.
+.It Dv CC_EOF
+EOF was entered.
+.It Dv CC_ARGHACK
+Expecting further command input as arguments, do nothing visually.
+.It Dv CC_REFRESH
+Refresh display.
+.It Dv CC_REFRESH_BEEP
+Refresh display, and beep.
+.It Dv CC_CURSOR
+Cursor moved, so update and perform
+.Dv CC_REFRESH .
+.It Dv CC_REDISPLAY
+Redisplay entire input line.
+This is useful if a key binding outputs extra information.
+.It Dv CC_ERROR
+An error occurred.
+Beep, and flush tty.
+.It Dv CC_FATAL
+Fatal error, reset tty to known state.
+.El
+.It Dv EL_HIST , Fa "History *(*func)(History *, int op, ...)" , \
+Fa "const char *ptr"
+Defines which history function to use, which is usually
+.Fn history .
+.Fa ptr
+should be the value returned by
+.Fn history_init .
+.It Dv EL_EDITMODE , Fa "int flag"
+If
+.Fa flag
+is non-zero,
+editing is enabled (the default).
+Note that this is only an indication, and does not
+affect the operation of
+.Nm .
+At this time, it is the caller's responsibility to
+check this
+(using
+.Fn el_get )
+to determine if editing should be enabled or not.
+.It Dv EL_UNBUFFERED , Fa "int flag"
+If
+.Fa flag
+is zero,
+unbuffered mode is disabled (the default).
+In unbuffered mode,
+.Fn el_gets
+will return immediately after processing a single character.
+.It Dv EL_GETCFN , Fa "int (*f)(EditLine *, char *c)"
+Define the character reading function as
+.Fa f ,
+which is to return the number of characters read and store them in
+.Fa c .
+This function is called internally by
+.Fn el_gets
+and
+.Fn el_getc .
+The builtin function can be set or restored with the special function
+name
+.Dq Dv EL_BUILTIN_GETCFN .
+.It Dv EL_CLIENTDATA , Fa "void *data"
+Register
+.Fa data
+to be associated with this EditLine structure.
+It can be retrieved with the corresponding
+.Fn el_get
+call.
+.It Dv EL_SETFP , Fa "int fd" , Fa "FILE *fp"
+Set the current
+.Nm editline
+file pointer for
+.Dq input
+.Fa fd
+=
+.Dv 0 ,
+.Dq output
+.Fa fd
+=
+.Dv 1 ,
+or
+.Dq error
+.Fa fd
+=
+.Dv 2
+from
+.Fa fp .
+.El
+.It Fn el_get
+Get
+.Nm
+parameters.
+.Fa op
+determines which parameter to retrieve into
+.Fa result .
+Returns 0 if successful, \-1 otherwise.
+.Pp
+The following values for
+.Fa op
+are supported, along with actual type of
+.Fa result :
+.Bl -tag -width 4n
+.It Dv EL_PROMPT , Fa "char *(*f)(EditLine *)" , Fa "char *c"
+Return a pointer to the function that displays the prompt in
+.Fa f .
+If
+.Fa c
+is not
+.Dv NULL ,
+return the start/stop literal prompt character in it.
+.It Dv EL_RPROMPT , Fa "char *(*f)(EditLine *)" , Fa "char *c"
+Return a pointer to the function that displays the prompt in
+.Fa f .
+If
+.Fa c
+is not
+.Dv NULL ,
+return the start/stop literal prompt character in it.
+.It Dv EL_EDITOR , Fa "const char **"
+Return the name of the editor, which will be one of
+.Dq emacs
+or
+.Dq vi .
+.It Dv EL_GETTC , Fa "const char *name" , Fa "void *value"
+Return non-zero if
+.Fa name
+is a valid
+.Xr termcap 5
+capability
+and set
+.Fa value
+to the current value of that capability.
+.It Dv EL_SIGNAL , Fa "int *"
+Return non-zero if
+.Nm
+has installed private signal handlers (see
+.Fn el_get
+above).
+.It Dv EL_EDITMODE , Fa "int *"
+Return non-zero if editing is enabled.
+.It Dv EL_GETCFN , Fa "int (**f)(EditLine *, char *)"
+Return a pointer to the function that read characters, which is equal to
+.Dq Dv EL_BUILTIN_GETCFN
+in the case of the default builtin function.
+.It Dv EL_CLIENTDATA , Fa "void **data"
+Retrieve
+.Fa data
+previously registered with the corresponding
+.Fn el_set
+call.
+.It Dv EL_UNBUFFERED , Fa "int"
+Return non-zero if unbuffered mode is enabled.
+.It Dv EL_PREP_TERM , Fa "int"
+Sets or clears terminal editing mode.
+.It Dv EL_GETFP , Fa "int fd", Fa "FILE **fp"
+Return in
+.Fa fp
+the current
+.Nm editline
+file pointer for
+.Dq input
+.Fa fd
+=
+.Dv 0 ,
+.Dq output
+.Fa fd
+=
+.Dv 1 ,
+or
+.Dq error
+.Fa fd
+=
+.Dv 2 .
+.El
+.It Fn el_source
+Initialise
+.Nm
+by reading the contents of
+.Fa file .
+.Fn el_parse
+is called for each line in
+.Fa file .
+If
+.Fa file
+is
+.Dv NULL ,
+try
+.Pa $HOME/.editrc .
+Refer to
+.Xr editrc 5
+for details on the format of
+.Fa file .
+.It Fn el_resize
+Must be called if the terminal size changes.
+If
+.Dv EL_SIGNAL
+has been set with
+.Fn el_set ,
+then this is done automatically.
+Otherwise, it's the responsibility of the application to call
+.Fn el_resize
+on the appropriate occasions.
+.It Fn el_cursor
+Move the cursor to the right (if positive) or to the left (if negative)
+.Fa count
+characters.
+Returns the resulting offset of the cursor from the beginning of the line.
+.It Fn el_line
+Return the editing information for the current line in a
+.Fa LineInfo
+structure, which is defined as follows:
+.Bd -literal
+typedef struct lineinfo {
+    const char *buffer;    /* address of buffer */
+    const char *cursor;    /* address of cursor */
+    const char *lastchar;  /* address of last character */
+} LineInfo;
+.Ed
+.Pp
+.Fa buffer
+is not NUL terminated.
+This function may be called after
+.Fn el_gets
+to obtain the
+.Fa LineInfo
+structure pertaining to line returned by that function,
+and from within user defined functions added with
+.Dv EL_ADDFN .
+.It Fn el_insertstr
+Insert
+.Fa str
+into the line at the cursor.
+Returns \-1 if
+.Fa str
+is empty or won't fit, and 0 otherwise.
+.It Fn el_deletestr
+Delete
+.Fa count
+characters before the cursor.
+.El
+.Sh HISTORY LIST FUNCTIONS
+The history functions use a common data structure,
+.Fa History ,
+which is created by
+.Fn history_init
+and freed by
+.Fn history_end .
+.Pp
+The following functions are available:
+.Bl -tag -width 4n
+.It Fn history_init
+Initialise the history list, and return a data structure
+to be used by all other history list functions.
+.It Fn history_end
+Clean up and finish with
+.Fa h ,
+assumed to have been created with
+.Fn history_init .
+.It Fn history
+Perform operation
+.Fa op
+on the history list, with optional arguments as needed by the
+operation.
+.Fa ev
+is changed accordingly to operation.
+The following values for
+.Fa op
+are supported, along with the required argument list:
+.Bl -tag -width 4n
+.It Dv H_SETSIZE , Fa "int size"
+Set size of history to
+.Fa size
+elements.
+.It Dv H_GETSIZE
+Get number of events currently in history.
+.It Dv H_END
+Cleans up and finishes with
+.Fa h ,
+assumed to be created with
+.Fn history_init .
+.It Dv H_CLEAR
+Clear the history.
+.It Dv H_FUNC , Fa "void *ptr" , Fa "history_gfun_t first" , \
+Fa "history_gfun_t next" , Fa "history_gfun_t last" , \
+Fa "history_gfun_t prev" , Fa "history_gfun_t curr" , \
+Fa "history_sfun_t set" , Fa "history_vfun_t clear" , \
+Fa "history_efun_t enter" , Fa "history_efun_t add"
+Define functions to perform various history operations.
+.Fa ptr
+is the argument given to a function when it's invoked.
+.It Dv H_FIRST
+Return the first element in the history.
+.It Dv H_LAST
+Return the last element in the history.
+.It Dv H_PREV
+Return the previous element in the history.
+.It Dv H_NEXT
+Return the next element in the history.
+.It Dv H_CURR
+Return the current element in the history.
+.It Dv H_SET
+Set the cursor to point to the requested element.
+.It Dv H_ADD , Fa "const char *str"
+Append
+.Fa str
+to the current element of the history, or perform the
+.Dv H_ENTER
+operation with argument
+.Fa str
+if there is no current element.
+.It Dv H_APPEND , Fa "const char *str"
+Append
+.Fa str
+to the last new element of the history.
+.It Dv H_ENTER , Fa "const char *str"
+Add
+.Fa str
+as a new element to the history, and, if necessary,
+removing the oldest entry to keep the list to the created size.
+If
+.Dv H_SETUNIQUE
+was has been called with a non-zero arguments, the element
+will not be entered into the history if its contents match
+the ones of the current history element.
+If the element is entered
+.Fn history
+returns 1, if it is ignored as a duplicate returns 0.
+Finally
+.Fn history
+returns \-1 if an error occurred.
+.It Dv H_PREV_STR , Fa "const char *str"
+Return the closest previous event that starts with
+.Fa str .
+.It Dv H_NEXT_STR , Fa "const char *str"
+Return the closest next event that starts with
+.Fa str .
+.It Dv H_PREV_EVENT , Fa "int e"
+Return the previous event numbered
+.Fa e .
+.It Dv H_NEXT_EVENT , Fa "int e"
+Return the next event numbered
+.Fa e .
+.It Dv H_LOAD , Fa "const char *file"
+Load the history list stored in
+.Fa file .
+.It Dv H_SAVE , Fa "const char *file"
+Save the history list to
+.Fa file .
+.It Dv H_SETUNIQUE , Fa "int unique"
+Set flag that adjacent identical event strings should not be entered
+into the history.
+.It Dv H_GETUNIQUE
+Retrieve the current setting if adjacent identical elements should
+be entered into the history.
+.It Dv H_DEL , Fa "int e"
+Delete the event numbered
+.Fa e .
+This function is only provided for
+.Xr readline 3
+compatibility.
+The caller is responsible for free'ing the string in the returned
+.Fa HistEvent .
+.El
+.Pp
+.Fn history
+returns \*[Gt]= 0 if the operation
+.Fa op
+succeeds.
+Otherwise, \-1 is returned and
+.Fa ev
+is updated to contain more details about the error.
+.El
+.Sh TOKENIZATION FUNCTIONS
+The tokenization functions use a common data structure,
+.Fa Tokenizer ,
+which is created by
+.Fn tok_init
+and freed by
+.Fn tok_end .
+.Pp
+The following functions are available:
+.Bl -tag -width 4n
+.It Fn tok_init
+Initialise the tokenizer, and return a data structure
+to be used by all other tokenizer functions.
+.Fa IFS
+contains the Input Field Separators, which defaults to
+.Aq space ,
+.Aq tab ,
+and
+.Aq newline
+if
+.Dv NULL .
+.It Fn tok_end
+Clean up and finish with
+.Fa t ,
+assumed to have been created with
+.Fn tok_init .
+.It Fn tok_reset
+Reset the tokenizer state.
+Use after a line has been successfully tokenized
+by
+.Fn tok_line
+or
+.Fn tok_str
+and before a new line is to be tokenized.
+.It Fn tok_line
+Tokenize
+.Fa li ,
+If successful, modify:
+.Fa argv
+to contain the words,
+.Fa argc
+to contain the number of words,
+.Fa cursorc
+(if not
+.Dv NULL )
+to contain the index of the word containing the cursor,
+and
+.Fa cursoro
+(if not
+.Dv NULL )
+to contain the offset within
+.Fa argv[cursorc]
+of the cursor.
+.Pp
+Returns
+0 if successful,
+\-1 for an internal error,
+1 for an unmatched single quote,
+2 for an unmatched double quote,
+and
+3 for a backslash quoted
+.Aq newline .
+A positive exit code indicates that another line should be read
+and tokenization attempted again.
+.
+.It Fn tok_str
+A simpler form of
+.Fn tok_line ;
+.Fa str
+is a NUL terminated string to tokenize.
+.El
+.
+.\"XXX.Sh EXAMPLES
+.\"XXX: provide some examples
+.Sh SEE ALSO
+.Xr sh 1 ,
+.Xr signal 3 ,
+.Xr termcap 3 ,
+.Xr editrc 5 ,
+.Xr termcap 5
+.Sh HISTORY
+The
+.Nm
+library first appeared in
+.Bx 4.4 .
+.Dv CC_REDISPLAY
+appeared in
+.Nx 1.3 .
+.Dv CC_REFRESH_BEEP ,
+.Dv EL_EDITMODE
+and the readline emulation appeared in
+.Nx 1.4 .
+.Dv EL_RPROMPT
+appeared in
+.Nx 1.5 .
+.Sh AUTHORS
+The
+.Nm
+library was written by Christos Zoulas.
+Luke Mewburn wrote this manual and implemented
+.Dv CC_REDISPLAY ,
+.Dv CC_REFRESH_BEEP ,
+.Dv EL_EDITMODE ,
+and
+.Dv EL_RPROMPT .
+Jaromir Dolecek implemented the readline emulation.
+Johny Mattsson implemented wide-character support.
+.Sh BUGS
+At this time, it is the responsibility of the caller to
+check the result of the
+.Dv EL_EDITMODE
+operation of
+.Fn el_get
+(after an
+.Fn el_source
+or
+.Fn el_parse )
+to determine if
+.Nm
+should be used for further input.
+I.e.,
+.Dv EL_EDITMODE
+is purely an indication of the result of the most recent
+.Xr editrc 5
+.Ic edit
+command.
diff --git a/doc/editrc.5.roff b/doc/editrc.5.roff
new file mode 100644
index 0000000..643f459
--- /dev/null
+++ b/doc/editrc.5.roff
@@ -0,0 +1,498 @@
+.\"	$NetBSD: editrc.5,v 1.27 2013/01/10 16:03:42 wiz Exp $
+.\"
+.\" Copyright (c) 1997-2000 The NetBSD Foundation, Inc.
+.\" All rights reserved.
+.\"
+.\" This file was contributed to The NetBSD Foundation by Luke Mewburn.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 10, 2013
+.Dt EDITRC 5
+.Os
+.Sh NAME
+.Nm editrc
+.Nd configuration file for editline library
+.Sh SYNOPSIS
+.Nm
+.Sh DESCRIPTION
+The
+.Nm
+file defines various settings to be used by the
+.Xr editline 3
+library.
+.Pp
+The format of each line is:
+.Dl [prog:]command [arg [...]]
+.Pp
+.Ar command
+is one of the
+.Xr editline 3
+builtin commands.
+Refer to
+.Sx BUILTIN COMMANDS
+for more information.
+.Pp
+.Ar prog
+is the program name string that a program defines when it calls
+.Xr el_init 3
+to set up
+.Xr editline 3 ,
+which is usually
+.Va argv[0] .
+.Ar command
+will be executed for any program which matches
+.Ar prog .
+.Pp
+.Ar prog
+may also be a
+.Xr regex 3
+style
+regular expression, in which case
+.Ar command
+will be executed for any program that matches the regular expression.
+.Pp
+If
+.Ar prog
+is absent,
+.Ar command
+is executed for all programs.
+.Sh BUILTIN COMMANDS
+The
+.Nm editline
+library has some builtin commands, which affect the way
+that the line editing and history functions operate.
+These are based on similar named builtins present in the
+.Xr tcsh 1
+shell.
+.Pp
+The following builtin commands are available:
+.Bl -tag -width 4n
+.It Ic bind Oo Fl a Oc Oo Fl e Oc Oo Fl k Oc Oo Fl l Oc Oo Fl r Oc \
+Oo Fl s Oc Oo Fl v Oc Oo Ar key Oo Ar command Oc Oc
+Without options, list all bound keys, and the editor command to which
+each is bound.
+If
+.Ar key
+is supplied, show the bindings for
+.Ar key .
+If
+.Ar key command
+is supplied, bind
+.Ar command
+to
+.Ar key .
+Options include:
+.Bl -tag -width 4n
+.It Fl e
+Bind all keys to the standard GNU Emacs-like bindings.
+.It Fl v
+Bind all keys to the standard
+.Xr vi 1 Ns -like
+bindings.
+.It Fl a
+List or change key bindings in the
+.Xr vi 1
+mode alternate (command mode) key map.
+.It Fl k
+.Ar key
+is interpreted as a symbolic arrow key name, which may be one of
+.Sq up ,
+.Sq down ,
+.Sq left
+or
+.Sq right .
+.It Fl l
+List all editor commands and a short description of each.
+.It Fl r
+Remove a key's binding.
+.It Fl s
+.Ar command
+is taken as a literal string and treated as terminal input when
+.Ar key
+is typed.
+Bound keys in
+.Ar command
+are themselves reinterpreted, and this continues for ten levels of
+interpretation.
+.El
+.Pp
+.Ar command
+may be one of the commands documented in
+.Sx "EDITOR COMMANDS"
+below, or another key.
+.Pp
+.Ar key
+and
+.Ar command
+can contain control characters of the form
+.Sm off
+.Sq No ^ Ar character
+.Sm on
+.Po
+e.g.
+.Sq ^A
+.Pc ,
+and the following backslashed escape sequences:
+.Pp
+.Bl -tag -compact -offset indent -width 4n
+.It Ic \ea
+Bell
+.It Ic \eb
+Backspace
+.It Ic \ee
+Escape
+.It Ic \ef
+Formfeed
+.It Ic \en
+Newline
+.It Ic \er
+Carriage return
+.It Ic \et
+Horizontal tab
+.It Ic \ev
+Vertical tab
+.Sm off
+.It Sy \e Ar nnn
+.Sm on
+The ASCII character corresponding to the octal number
+.Ar nnn .
+.El
+.Pp
+.Sq \e
+nullifies the special meaning of the following character,
+if it has any, notably
+.Sq \e
+and
+.Sq ^ .
+.It Ic echotc Oo Fl sv Oc Ar arg Ar ...
+Exercise terminal capabilities given in
+.Ar arg Ar ... .
+If
+.Ar arg
+is
+.Sq baud ,
+.Sq cols ,
+.Sq lines ,
+.Sq rows ,
+.Sq meta ,
+or
+.Sq tabs ,
+the value of that capability is printed, with
+.Dq yes
+or
+.Dq no
+indicating that the terminal does or does not have that capability.
+.Pp
+.Fl s
+returns an empty string for non-existent capabilities, rather than
+causing an error.
+.Fl v
+causes messages to be verbose.
+.It Ic edit Op Li on | Li off
+Enable or disable the
+.Nm editline
+functionality in a program.
+.It Ic history Ar list | Ar size Dv n | Ar unique Dv n
+The
+.Ar list
+command lists all entries in the history.
+The
+.Ar size
+command sets the history size to
+.Dv n
+entries.
+The
+.Ar unique
+command controls if history should keep duplicate entries.
+If
+.Dv n
+is non zero, only keep unique history entries.
+If
+.Dv n
+is zero, then keep all entries (the default).
+.It Ic telltc
+List the values of all the terminal capabilities (see
+.Xr termcap 5 ) .
+.It Ic settc Ar cap Ar val
+Set the terminal capability
+.Ar cap
+to
+.Ar val ,
+as defined in
+.Xr termcap 5 .
+No sanity checking is done.
+.It Ic setty Oo Fl a Oc Oo Fl d Oc Oo Fl q Oc Oo Fl x Oc Oo Ar +mode Oc \
+Oo Ar -mode Oc Oo Ar mode Oc Oo Ar char=c Oc
+Control which tty modes that
+.Nm
+won't allow the user to change.
+.Fl d ,
+.Fl q
+or
+.Fl x
+tells
+.Ic setty
+to act on the
+.Sq edit ,
+.Sq quote
+or
+.Sq execute
+set of tty modes respectively; defaulting to
+.Fl x .
+.Pp
+Without other arguments,
+.Ic setty
+lists the modes in the chosen set which are fixed on
+.Po
+.Sq +mode
+.Pc
+or off
+.Po
+.Sq -mode
+.Pc .
+.Fl a
+lists all tty modes in the chosen set regardless of the setting.
+With
+.Ar +mode ,
+.Ar -mode
+or
+.Ar mode ,
+fixes
+.Ar mode
+on or off or removes control of
+.Ar mode
+in the chosen set.
+.Pp
+.Ic Setty
+can also be used to set tty characters to particular values using
+.Ar char=value .
+If
+.Ar value
+is empty
+then the character is set to
+.Dv _POSIX_VDISABLE .
+.El
+.Sh EDITOR COMMANDS
+The following editor commands are available for use in key bindings:
+.\" Section automatically generated with makelist
+.Bl -tag -width 4n
+.It Ic vi-paste-next
+Vi paste previous deletion to the right of the cursor.
+.It Ic vi-paste-prev
+Vi paste previous deletion to the left of the cursor.
+.It Ic vi-prev-space-word
+Vi move to the previous space delimited word.
+.It Ic vi-prev-word
+Vi move to the previous word.
+.It Ic vi-next-space-word
+Vi move to the next space delimited word.
+.It Ic vi-next-word
+Vi move to the next word.
+.It Ic vi-change-case
+Vi change case of character under the cursor and advance one character.
+.It Ic vi-change-meta
+Vi change prefix command.
+.It Ic vi-insert-at-bol
+Vi enter insert mode at the beginning of line.
+.It Ic vi-replace-char
+Vi replace character under the cursor with the next character typed.
+.It Ic vi-replace-mode
+Vi enter replace mode.
+.It Ic vi-substitute-char
+Vi replace character under the cursor and enter insert mode.
+.It Ic vi-substitute-line
+Vi substitute entire line.
+.It Ic vi-change-to-eol
+Vi change to end of line.
+.It Ic vi-insert
+Vi enter insert mode.
+.It Ic vi-add
+Vi enter insert mode after the cursor.
+.It Ic vi-add-at-eol
+Vi enter insert mode at end of line.
+.It Ic vi-delete-meta
+Vi delete prefix command.
+.It Ic vi-end-word
+Vi move to the end of the current space delimited word.
+.It Ic vi-to-end-word
+Vi move to the end of the current word.
+.It Ic vi-undo
+Vi undo last change.
+.It Ic vi-command-mode
+Vi enter command mode (use alternative key bindings).
+.It Ic vi-zero
+Vi move to the beginning of line.
+.It Ic vi-delete-prev-char
+Vi move to previous character (backspace).
+.It Ic vi-list-or-eof
+Vi list choices for completion or indicate end of file if empty line.
+.It Ic vi-kill-line-prev
+Vi cut from beginning of line to cursor.
+.It Ic vi-search-prev
+Vi search history previous.
+.It Ic vi-search-next
+Vi search history next.
+.It Ic vi-repeat-search-next
+Vi repeat current search in the same search direction.
+.It Ic vi-repeat-search-prev
+Vi repeat current search in the opposite search direction.
+.It Ic vi-next-char
+Vi move to the character specified next.
+.It Ic vi-prev-char
+Vi move to the character specified previous.
+.It Ic vi-to-next-char
+Vi move up to the character specified next.
+.It Ic vi-to-prev-char
+Vi move up to the character specified previous.
+.It Ic vi-repeat-next-char
+Vi repeat current character search in the same search direction.
+.It Ic vi-repeat-prev-char
+Vi repeat current character search in the opposite search direction.
+.It Ic em-delete-or-list
+Delete character under cursor or list completions if at end of line.
+.It Ic em-delete-next-word
+Cut from cursor to end of current word.
+.It Ic em-yank
+Paste cut buffer at cursor position.
+.It Ic em-kill-line
+Cut the entire line and save in cut buffer.
+.It Ic em-kill-region
+Cut area between mark and cursor and save in cut buffer.
+.It Ic em-copy-region
+Copy area between mark and cursor to cut buffer.
+.It Ic em-gosmacs-transpose
+Exchange the two characters before the cursor.
+.It Ic em-next-word
+Move next to end of current word.
+.It Ic em-upper-case
+Uppercase the characters from cursor to end of current word.
+.It Ic em-capitol-case
+Capitalize the characters from cursor to end of current word.
+.It Ic em-lower-case
+Lowercase the characters from cursor to end of current word.
+.It Ic em-set-mark
+Set the mark at cursor.
+.It Ic em-exchange-mark
+Exchange the cursor and mark.
+.It Ic em-universal-argument
+Universal argument (argument times 4).
+.It Ic em-meta-next
+Add 8th bit to next character typed.
+.It Ic em-toggle-overwrite
+Switch from insert to overwrite mode or vice versa.
+.It Ic em-copy-prev-word
+Copy current word to cursor.
+.It Ic em-inc-search-next
+Emacs incremental next search.
+.It Ic em-inc-search-prev
+Emacs incremental reverse search.
+.It Ic ed-end-of-file
+Indicate end of file.
+.It Ic ed-insert
+Add character to the line.
+.It Ic ed-delete-prev-word
+Delete from beginning of current word to cursor.
+.It Ic ed-delete-next-char
+Delete character under cursor.
+.It Ic ed-kill-line
+Cut to the end of line.
+.It Ic ed-move-to-end
+Move cursor to the end of line.
+.It Ic ed-move-to-beg
+Move cursor to the beginning of line.
+.It Ic ed-transpose-chars
+Exchange the character to the left of the cursor with the one under it.
+.It Ic ed-next-char
+Move to the right one character.
+.It Ic ed-prev-word
+Move to the beginning of the current word.
+.It Ic ed-prev-char
+Move to the left one character.
+.It Ic ed-quoted-insert
+Add the next character typed verbatim.
+.It Ic ed-digit
+Adds to argument or enters a digit.
+.It Ic ed-argument-digit
+Digit that starts argument.
+.It Ic ed-unassigned
+Indicates unbound character.
+.It Ic ed-tty-sigint
+Tty interrupt character.
+.It Ic ed-tty-dsusp
+Tty delayed suspend character.
+.It Ic ed-tty-flush-output
+Tty flush output characters.
+.It Ic ed-tty-sigquit
+Tty quit character.
+.It Ic ed-tty-sigtstp
+Tty suspend character.
+.It Ic ed-tty-stop-output
+Tty disallow output characters.
+.It Ic ed-tty-start-output
+Tty allow output characters.
+.It Ic ed-newline
+Execute command.
+.It Ic ed-delete-prev-char
+Delete the character to the left of the cursor.
+.It Ic ed-clear-screen
+Clear screen leaving current line at the top.
+.It Ic ed-redisplay
+Redisplay everything.
+.It Ic ed-start-over
+Erase current line and start from scratch.
+.It Ic ed-sequence-lead-in
+First character in a bound sequence.
+.It Ic ed-prev-history
+Move to the previous history line.
+.It Ic ed-next-history
+Move to the next history line.
+.It Ic ed-search-prev-history
+Search previous in history for a line matching the current.
+.It Ic ed-search-next-history
+Search next in history for a line matching the current.
+.It Ic ed-prev-line
+Move up one line.
+.It Ic ed-next-line
+Move down one line.
+.It Ic ed-command
+Editline extended command.
+.El
+.\" End of section automatically generated with makelist
+.Sh FILES
+.Bl -tag -width "~/.editrcXXX"
+.It Pa ~/.editrc
+User configuration file for the
+.Xr editline 3
+library.
+.El
+.Sh SEE ALSO
+.Xr editline 3 ,
+.Xr regex 3 ,
+.Xr termcap 5
+.Sh AUTHORS
+The
+.Nm editline
+library was written by Christos Zoulas,
+and this manual was written by Luke Mewburn,
+with some sections inspired by
+.Xr tcsh 1 .
diff --git a/doc/mdoc2man.awk b/doc/mdoc2man.awk
new file mode 100644
index 0000000..e21753f
--- /dev/null
+++ b/doc/mdoc2man.awk
@@ -0,0 +1,459 @@
+#!/usr/bin/awk
+#
+# Version history:
+#  v3, I put the program under a proper license
+#      Dan Nelson <dnelson@allantgroup.com> added .An, .Aq and fixed a typo
+#  v2, fixed to work on GNU awk --posix and MacOS X
+#  v1, first attempt, didn't work on MacOS X
+#
+# Copyright (c) 2003 Peter Stuge <stuge-mdoc2man@cdy.org>
+#
+# Permission to use, copy, modify, and distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+
+BEGIN {
+  optlist=0
+  oldoptlist=0
+  nospace=0
+  synopsis=0
+  reference=0
+  block=0
+  ext=0
+  extopt=0
+  literal=0
+  prenl=0
+  breakw=0
+  line=""
+  proto=0
+  bl_level=0
+}
+
+function wtail() {
+  retval=""
+  while(w<nwords) {
+    if(length(retval))
+      retval=retval OFS
+    retval=retval words[++w]
+  }
+  return retval
+}
+
+function add(str) {
+  for(;prenl;prenl--)
+    line=line "\n"
+  line=line str
+}
+
+! /^\./ {
+  for(;prenl;prenl--)
+    print ""
+  print
+  if(literal)
+    print ".br"
+  next
+}
+
+/^\.\\"/ { next }
+
+{
+  option=0
+  parens=0
+  angles=0
+  sub("^\\.","")
+  nwords=split($0,words)
+  for(w=1;w<=nwords;w++) {
+    skip=0
+    if(match(words[w],"^Li|Pf$")) {
+      skip=1
+    } else if(match(words[w],"^Xo$")) {
+      skip=1
+      ext=1
+      if(length(line)&&!(match(line," $")||prenl))
+	add(OFS)
+    } else if(match(words[w],"^Xc$")) {
+      skip=1
+      ext=0
+      if(!extopt)
+	prenl++
+      w=nwords
+    } else if(match(words[w],"^Bd$")) {
+      skip=1
+      if(match(words[w+1],"-literal")) {
+	literal=1
+	prenl++
+	w=nwords
+      }
+    } else if(match(words[w],"^Po$")) {
+      skip=1
+      add("(")
+      if(!nospace)
+	nospace=1
+    } else if(match(words[w],"^Pc$")) {
+      skip=1
+      add(")")
+      if(!nospace)
+	nospace=1
+    } else if(match(words[w],"^Ed$")) {
+      skip=1
+      literal=0
+    } else if(match(words[w],"^Ns$")) {
+      skip=1
+      if(!nospace)
+	nospace=1
+      sub(" $","",line)
+    } else if(match(words[w],"^No$")) {
+      skip=1
+      sub(" $","",line)
+      add(words[++w])
+    } else if(match(words[w],"^Dq$")) {
+      skip=1
+      add("``")
+      add(words[++w])
+      while(w<nwords&&!match(words[w+1],"^[\\.,]"))
+	add(OFS words[++w])
+      add("''")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Va$")) {
+      skip=1
+      add("\\fI" words[++w])
+      while(w<nwords&&!match(words[w+1],"^[\\.,]"))
+	add(OFS words[++w])
+      add("\\fP")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Sq|Ql$")) {
+      skip=1
+      add("`" words[++w] "'")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Oo$")) {
+      skip=1
+      extopt=1
+      if(!nospace)
+	nospace=1
+      add("[")
+    } else if(match(words[w],"^Oc$")) {
+      skip=1
+      extopt=0
+      add("]")
+    }
+    if(!skip) {
+      if(!nospace&&length(line)&&!(match(line," $")||prenl))
+	add(OFS)
+      if(nospace==1)
+	nospace=0
+    }
+    if(match(words[w],"^Dd$")) {
+      date=wtail()
+      next
+    } else if(match(words[w],"^Dt$")) {
+      id=wtail()
+      next
+    } else if(match(words[w],"^Os$")) {
+      add(".TH " id " \"" date "\" \"" wtail() "\"")
+    } else if(match(words[w],"^Sh$")) {
+      add(".SH")
+      synopsis=match(words[w+1],"SYNOPSIS")
+    } else if(match(words[w],"^Xr$")) {
+      #add("\\fB" words[++w] "\\fP(" words[++w] ")" words[++w])
+      add("\\fB" words[++w] "\\fP(" words[++w] ")")
+      sub("^Ns$", "", words[w+1])
+      add(words[++w])
+    } else if(match(words[w],"^Rs$")) {
+      split("",refauthors)
+      nrefauthors=0
+      reftitle=""
+      refissue=""
+      refdate=""
+      refopt=""
+      reference=1
+      next
+    } else if(match(words[w],"^Re$")) {
+      prenl++
+      for(i=nrefauthors-1;i>0;i--) {
+	add(refauthors[i])
+	if(i>1)
+	  add(", ")
+      }
+      if(nrefauthors>1)
+	add(" and ")
+      add(refauthors[0] ", \\fI" reftitle "\\fP")
+      if(length(refissue))
+	add(", " refissue)
+      if(length(refdate))
+	add(", " refdate)
+      if(length(refopt))
+	add(", " refopt)
+      add(".")
+      reference=0
+    } else if(reference) {
+      if(match(words[w],"^%A$")) { refauthors[nrefauthors++]=wtail() }
+      if(match(words[w],"^%T$")) {
+	reftitle=wtail()
+	sub("^\"","",reftitle)
+	sub("\"$","",reftitle)
+      }
+      if(match(words[w],"^%N$")) { refissue=wtail() }
+      if(match(words[w],"^%D$")) { refdate=wtail() }
+      if(match(words[w],"^%O$")) { refopt=wtail() }
+    } else if(match(words[w],"^Nm$")) {
+      if(synopsis) {
+	add(".br")
+	prenl++
+      }
+      n=words[++w]
+      if(!length(name))
+	name=n
+      if(!length(n))
+	n=name
+      add("\\fB" n "\\fP")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Nd$")) {
+      add("\\- " wtail())
+    } else if(match(words[w],"^Fl$")) {
+      add("\\fB\\-" words[++w] "\\fP")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Ar$")) {
+      add("\\fI")
+      if(w==nwords)
+	add("file ...\\fP")
+      else {
+	add(words[++w] "\\fP")
+	while(match(words[w+1],"^\\|$"))
+	  add(OFS words[++w] " \\fI" words[++w] "\\fP")
+      }
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Cm$")) {
+      add("\\fB" words[++w] "\\fP")
+      while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
+	add(words[++w])
+    } else if(match(words[w],"^Op$")) {
+      option=1
+      if(!nospace)
+	nospace=1
+      add("[")
+    } else if(match(words[w],"^Pp$")) {
+      prenl++
+    } else if(match(words[w],"^An$")) {
+      prenl++
+    } else if(match(words[w],"^Ss$")) {
+      add(".SS")
+    } else if(match(words[w],"^Pa$")&&!option) {
+      add("\\fI")
+      w++
+      if(match(words[w],"^\\."))
+	add("\\&")
+      add(words[w] "\\fP")
+      while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
+	add(words[++w])
+    } else if(match(words[w],"^Dv$")) {
+      #add(".BR")
+    } else if(match(words[w],"^Em|Ev$")) {
+      add(".IR")
+    } else if(match(words[w],"^Pq$")) {
+      add("(")
+      nospace=1
+      parens=1
+    } else if(match(words[w],"^Aq$")) {
+      add("<")
+      nospace=1
+      angles=1
+    } else if(match(words[w],"^S[xy]$")) {
+      add(".B " wtail())
+    } else if(match(words[w],"^Ic$")) {
+      plain=1
+      add("\\fB")
+      while(w<nwords) {
+	w++
+	if(match(words[w],"^Op$")) {
+	  w++
+	  add("[")
+	  words[nwords]=words[nwords] "]"
+	}
+	if(match(words[w],"^Ar$")) {
+	  add("\\fI" words[++w] "\\fP")
+	} else if(match(words[w],"^[\\.,]")) {
+	  sub(" $","",line)
+	  if(plain) {
+	    add("\\fP")
+	    plain=0
+	  }
+	  add(words[w])
+	} else if(match(words[w],"^Xo$")) {
+	} else {
+	  if(!plain) {
+	    add("\\fB")
+	    plain=1
+	  }
+	  add(words[w])
+	}
+	if(!nospace)
+	  add(OFS)
+      }
+      sub(" $","",line)
+      if(plain)
+	add("\\fP")
+    } else if(match(words[w],"^Dl$")) {
+       ## remove is ok for editrc.5
+    } else if(match(words[w],"^Bl$")) {
+      ++bl_level
+      if (bl_level > 1)
+         add(".RS")
+      oldoptlist=optlist
+      if(match(words[w+1],"-bullet"))
+	optlist=1
+      else if(match(words[w+1],"-enum")) {
+	optlist=2
+	enum=0
+      } else if(match(words[w+1],"-tag"))
+	optlist=3
+      else if(match(words[w+1],"-item"))
+	optlist=4
+      else if(match(words[w+1],"-bullet"))
+	optlist=1
+      w=nwords
+    } else if(match(words[w],"^El$")) {
+      if (bl_level > 1)
+         add(".RE")
+      --bl_level
+      optlist=oldoptlist
+    } else if(match(words[w],"^Bk$")) {
+      if(match(words[w+1],"-words")) {
+	w++
+	breakw=1
+      }
+    } else if(match(words[w],"^Ek$")) {
+      breakw=0
+    } else if(match(words[w],"^It$")&&optlist) {
+      if(optlist==1)
+	add(".IP \\(bu")
+      else if(optlist==2)
+	add(".IP " ++enum ".")
+      else if(optlist==3) {
+	add(".TP")
+	prenl++
+	if(match(words[w+1],"^Pa$|^Ev$")) {
+	  add(".B")
+	  w++
+	}
+      } else if(optlist==4)
+	add(".IP")
+    } else if(match(words[w],"^Sm$")) {
+      if(match(words[w+1],"off"))
+	nospace=2
+      else if(match(words[w+1],"on"))
+	nospace=0
+      w++
+    } else if(match(words[w],"^Lb$")) {
+      wtail()
+      add("Command Line Editor Library (libedit, -ledit)")
+    } else if(match(words[w],"^In$")) {
+      add(".PP\n")
+      add("\\fB#include <" wtail() ">\\fP")
+    } else if(match(words[w],"^Ft$")) {
+      add(".PP\n")
+      add("\\fI" wtail() "\\fP\n")
+      add(".br")
+      proto=1
+    } else if(match(words[w],"^Fn$")) {
+      add("\\fB" words[++w] "\\fP(")
+      punct=0
+      while(++w<=nwords) {
+         if(match(words[w], "^\".*\"$")) {
+            sub("^\"", "", words[w])
+            sub("\"$", "", words[w])
+	    add("\\fI" words[w] "\\fP")
+            if (w!=nwords) {
+	       add(", ")
+            }
+         } else if(match(words[w], "^\"")) {
+            sub("^\"", "", words[w])
+	    add("\\fI" words[w] " ")
+         } else if (match(words[w], "\"$")) {
+            sub("\"$", "", words[w])
+	    add(words[w] "\\fP")
+            if (w!=nwords) {
+	       add(", ")
+            }
+         } else {
+            if (w==nwords&&(match(words[w], "^[.,]$"))) {
+               punct=1
+            } else {
+	       add(words[w] " ")
+            }
+               
+         }
+      }
+      add(")")
+      if (punct==1) {
+         add(words[w-1])
+      } else {
+         if (proto==1) {
+            add(";")
+            proto=0
+         }
+      }
+    } else if(match(words[w],"^Fa$")) {
+      punct=0
+      add("\\fI")
+      while(++w<=nwords) {
+         if(match(words[w], "^\".*\"$")) {
+            sub("^\"", "", words[w])
+            sub("\"$", "", words[w])
+	    add(words[w])
+         } else if(match(words[w], "^\"")) {
+            sub("^\"", "", words[w])
+	    add(words[w] " ")
+         } else if (match(words[w], "\"$")) {
+            sub("\"$", "", words[w])
+	    add(words[w])
+         } else {
+            if (w==nwords&&(match(words[w], "^[.,]$"))) {
+               punct=1
+            } else {
+               if (w+1==nwords&&(match(words[w+1], "^[.,]$"))) {
+	          add(words[w])
+               } else {
+	          add(words[w] " ")
+               }
+            }
+         }
+      }
+      add("\\fP")
+      if (punct==1) {
+         add(words[w-1])
+      }
+    } else if(!skip) {
+      add(words[w])
+    }
+  }
+  if(match(line,"^\\.[^a-zA-Z]"))
+    sub("^\\.","",line)
+  if(parens)
+    add(")")
+  if(angles)
+    add(">")
+  if(option)
+    add("]")
+  if(ext&&!extopt&&!match(line," $"))
+    add(OFS)
+  if(!ext&&!extopt&&length(line)) {
+    print line
+    prenl=0
+    line=""
+  }
+}
diff --git a/examples/Makefile.am b/examples/Makefile.am
new file mode 100644
index 0000000..a5c1950
--- /dev/null
+++ b/examples/Makefile.am
@@ -0,0 +1,14 @@
+
+LDADD = $(top_builddir)/src/libedit.la
+AM_CFLAGS = -I$(top_srcdir)/src
+
+noinst_PROGRAMS  = tc1 fileman
+
+tc1_SOURCES      = tc1.c
+fileman_SOURCES  = fileman.c
+
+if WIDECHAR
+noinst_PROGRAMS += wtc1
+wtc1_SOURCES     = wtc1.c
+endif
+
diff --git a/examples/Makefile.in b/examples/Makefile.in
new file mode 100644
index 0000000..31b47f7
--- /dev/null
+++ b/examples/Makefile.in
@@ -0,0 +1,599 @@
+# Makefile.in generated by automake 1.14 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+noinst_PROGRAMS = tc1$(EXEEXT) fileman$(EXEEXT) $(am__EXEEXT_1)
+@WIDECHAR_TRUE@am__append_1 = wtc1
+subdir = examples
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/depcomp
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+@WIDECHAR_TRUE@am__EXEEXT_1 = wtc1$(EXEEXT)
+PROGRAMS = $(noinst_PROGRAMS)
+am_fileman_OBJECTS = fileman.$(OBJEXT)
+fileman_OBJECTS = $(am_fileman_OBJECTS)
+fileman_LDADD = $(LDADD)
+fileman_DEPENDENCIES = $(top_builddir)/src/libedit.la
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_tc1_OBJECTS = tc1.$(OBJEXT)
+tc1_OBJECTS = $(am_tc1_OBJECTS)
+tc1_LDADD = $(LDADD)
+tc1_DEPENDENCIES = $(top_builddir)/src/libedit.la
+am__wtc1_SOURCES_DIST = wtc1.c
+@WIDECHAR_TRUE@am_wtc1_OBJECTS = wtc1.$(OBJEXT)
+wtc1_OBJECTS = $(am_wtc1_OBJECTS)
+wtc1_LDADD = $(LDADD)
+wtc1_DEPENDENCIES = $(top_builddir)/src/libedit.la
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(fileman_SOURCES) $(tc1_SOURCES) $(wtc1_SOURCES)
+DIST_SOURCES = $(fileman_SOURCES) $(tc1_SOURCES) \
+	$(am__wtc1_SOURCES_DIST)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_VERSION = @LT_VERSION@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NROFF = @NROFF@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+LDADD = $(top_builddir)/src/libedit.la
+AM_CFLAGS = -I$(top_srcdir)/src
+tc1_SOURCES = tc1.c
+fileman_SOURCES = fileman.c
+@WIDECHAR_TRUE@wtc1_SOURCES = wtc1.c
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign examples/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstPROGRAMS:
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+fileman$(EXEEXT): $(fileman_OBJECTS) $(fileman_DEPENDENCIES) $(EXTRA_fileman_DEPENDENCIES) 
+	@rm -f fileman$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(fileman_OBJECTS) $(fileman_LDADD) $(LIBS)
+
+tc1$(EXEEXT): $(tc1_OBJECTS) $(tc1_DEPENDENCIES) $(EXTRA_tc1_DEPENDENCIES) 
+	@rm -f tc1$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(tc1_OBJECTS) $(tc1_LDADD) $(LIBS)
+
+wtc1$(EXEEXT): $(wtc1_OBJECTS) $(wtc1_DEPENDENCIES) $(EXTRA_wtc1_DEPENDENCIES) 
+	@rm -f wtc1$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(wtc1_OBJECTS) $(wtc1_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fileman.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc1.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wtc1.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+	clean-libtool clean-noinstPROGRAMS cscopelist-am ctags \
+	ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/examples/fileman.c b/examples/fileman.c
new file mode 100644
index 0000000..2d1a0d4
--- /dev/null
+++ b/examples/fileman.c
@@ -0,0 +1,496 @@
+/* fileman.c -- A tiny application which demonstrates how to use the
+   GNU Readline library.  This application interactively allows users
+   to manipulate files and their modes.
+
+   NOTE: this was taken from the GNU Readline documentation and ported
+   to libedit. A commad to output the history list was added.
+   
+   */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/file.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <ctype.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <locale.h>
+#include <time.h>
+
+/* GNU readline
+#include <readline/readline.h>
+#include <readline/history.h>
+*/
+#include <editline/readline.h>
+
+void * xmalloc (size_t size);
+void too_dangerous (char *caller);
+void initialize_readline ();
+int execute_line (char *line);
+int valid_argument (char *caller, char *arg);
+
+typedef int rl_icpfunc_t (char *);
+
+/* The names of functions that actually do the manipulation. */
+int com_list (char *);
+int com_view (char *);
+int com_history (char *);
+int com_rename(char *);
+int com_stat(char *);
+int com_pwd(char *);
+int com_delete(char *);
+int com_help(char *);
+int com_cd(char *);
+int com_quit(char *);
+
+/* A structure which contains information on the commands this program
+   can understand. */
+
+typedef struct {
+   char *name;                   /* User printable name of the function. */
+   rl_icpfunc_t *func;           /* Function to call to do the job. */
+   char *doc;                    /* Documentation for this function.  */
+} COMMAND;
+
+COMMAND commands[] = {
+   { "cd", com_cd, "Change to directory DIR" },
+   { "delete", com_delete, "Delete FILE" },
+   { "help", com_help, "Display this text" },
+   { "?", com_help, "Synonym for `help'" },
+   { "list", com_list, "List files in DIR" },
+   { "ls", com_list, "Synonym for `list'" },
+   { "pwd", com_pwd, "Print the current working directory" },
+   { "quit", com_quit, "Quit using Fileman" },
+   { "rename", com_rename, "Rename FILE to NEWNAME" },
+   { "stat", com_stat, "Print out statistics on FILE" },
+   { "view", com_view, "View the contents of FILE" },
+   { "history", com_history, "List editline history" },
+   { (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL }
+};
+
+/* Forward declarations. */
+char *stripwhite ();
+COMMAND *find_command ();
+
+/* The name of this program, as taken from argv[0]. */
+char *progname;
+
+/* When non-zero, this means the user is done using this program. */
+int done;
+
+char *
+dupstr (char* s)
+{
+   char *r;
+
+   r = xmalloc (strlen (s) + 1);
+   strcpy (r, s);
+   return (r);
+}
+
+int
+main (int argc __attribute__((__unused__)), char **argv)
+{
+   char *line, *s;
+
+   progname = argv[0];
+
+   setlocale(LC_CTYPE, "");
+
+   initialize_readline();       /* Bind our completer. */
+
+   stifle_history(7);
+
+   /* Loop reading and executing lines until the user quits. */
+   for ( ; done == 0; )
+   {
+      line = readline ("FileMan: ");
+
+      if (!line)
+         break;
+
+      /* Remove leading and trailing whitespace from the line.
+         Then, if there is anything left, add it to the history list
+         and execute it. */
+      s = stripwhite(line);
+
+      if (*s) {
+
+         char* expansion;
+         int result;
+
+         result = history_expand(s, &expansion);
+
+         if (result < 0 || result == 2) {
+            fprintf(stderr, "%s\n", expansion);
+         } else {
+            add_history(expansion);
+            execute_line(expansion);
+         }
+         free(expansion);
+      }
+
+      free(line);
+   }
+   exit (0);
+
+   return 0;
+}
+
+/* Execute a command line. */
+int
+execute_line (char *line)
+{
+   register int i;
+   COMMAND *command;
+   char *word;
+
+   /* Isolate the command word. */
+   i = 0;
+   while (line[i] && isspace (line[i]))
+      i++;
+   word = line + i;
+
+   while (line[i] && !isspace (line[i]))
+      i++;
+
+   if (line[i])
+      line[i++] = '\0';
+
+   command = find_command (word);
+
+   if (!command)
+   {
+      fprintf (stderr, "%s: No such command for FileMan.\n", word);
+      return (-1);
+   }
+
+   /* Get argument to command, if any. */
+   while (isspace (line[i]))
+      i++;
+
+   word = line + i;
+
+   /* Call the function. */
+   return ((*(command->func)) (word));
+}
+
+/* Look up NAME as the name of a command, and return a pointer to that
+   command.  Return a NULL pointer if NAME isn't a command name. */
+COMMAND *
+find_command (char *name)
+{
+   register int i;
+
+   for (i = 0; commands[i].name; i++)
+      if (strcmp (name, commands[i].name) == 0)
+         return (&commands[i]);
+
+   return ((COMMAND *)NULL);
+}
+
+/* Strip whitespace from the start and end of STRING.  Return a pointer
+   into STRING. */
+char *
+stripwhite (char *string)
+{
+   register char *s, *t;
+
+   for (s = string; isspace (*s); s++)
+      ;
+
+   if (*s == 0)
+      return (s);
+
+   t = s + strlen (s) - 1;
+   while (t > s && isspace (*t))
+      t--;
+   *++t = '\0';
+
+   return s;
+}
+
+/* **************************************************************** */
+/*                                                                  */
+/*                  Interface to Readline Completion                */
+/*                                                                  */
+/* **************************************************************** */
+
+char *command_generator(const char *, int);
+char **fileman_completion(const char *, int, int);
+
+/* Tell the GNU Readline library how to complete.  We want to try to
+   complete on command names if this is the first word in the line, or
+   on filenames if not. */
+void
+initialize_readline ()
+{
+   /* Allow conditional parsing of the ~/.inputrc file. */
+   rl_readline_name = "FileMan";
+
+   /* Tell the completer that we want a crack first. */
+   rl_attempted_completion_function = fileman_completion;
+}
+
+/* Attempt to complete on the contents of TEXT.  START and END
+   bound the region of rl_line_buffer that contains the word to
+   complete.  TEXT is the word to complete.  We can use the entire
+   contents of rl_line_buffer in case we want to do some simple
+   parsing.  Returnthe array of matches, or NULL if there aren't any. */
+char **
+fileman_completion (const char* text, int start, int end __attribute__((__unused__)))
+{
+   char **matches;
+
+   matches = (char **)NULL;
+
+   /* If this word is at the start of the line, then it is a command
+      to complete.  Otherwise it is the name of a file in the current
+      directory. */
+   if (start == 0)
+      /* TODO */
+      matches = completion_matches (text, command_generator);
+      /* matches = rl_completion_matches (text, command_generator); */
+
+   return (matches);
+}
+
+/* Generator function for command completion.  STATE lets us
+   know whether to start from scratch; without any state
+   (i.e. STATE == 0), then we start at the top of the list. */
+char *
+command_generator (text, state)
+   const char *text;
+   int state;
+{
+   static int list_index, len;
+   char *name;
+
+   /* If this is a new word to complete, initialize now.  This
+      includes saving the length of TEXT for efficiency, and
+      initializing the index variable to 0. */
+   if (!state)
+   {
+      list_index = 0;
+      len = strlen (text);
+   }
+
+   /* Return the next name which partially matches from the
+      command list. */
+   while ((name = commands[list_index].name))
+   {
+      list_index++;
+
+      if (strncmp (name, text, len) == 0)
+         return (dupstr(name));
+   }
+
+   /* If no names matched, then return NULL. */
+   return ((char *)NULL);
+}
+
+/* **************************************************************** */
+/*                                                                  */
+/*                       FileMan Commands                           */
+/*                                                                  */
+/* **************************************************************** */
+
+/* String to pass to system ().  This is for the LIST, VIEW and RENAME
+   commands. */
+static char syscom[1024];
+
+/* List the file(s) named in arg. */
+int
+com_list (char *arg)
+{
+   if (!arg)
+      arg = "";
+
+   sprintf (syscom, "ls -FClg %s", arg);
+   return (system (syscom));
+}
+
+int
+com_view (char *arg)
+{
+   if (!valid_argument ("view", arg))
+      return 1;
+
+   sprintf (syscom, "more %s", arg);
+   return (system (syscom));
+}
+
+int
+com_history(char* arg __attribute__((__unused__)))
+{
+   HIST_ENTRY *he;
+
+   /* rewind history */
+   while (next_history())
+      ;
+
+   for (he = current_history(); he != NULL; he = previous_history()) {
+      //printf("%5d  %s\n", *((int*)he->data) - 1, he->line);
+      printf("%s\n", he->line);
+   }
+
+   return 0;
+}
+
+int
+com_rename (char *arg __attribute__((__unused__)))
+{
+   too_dangerous ("rename");
+   return (1);
+}
+
+int
+com_stat (char *arg)
+{
+   struct stat finfo;
+
+   if (!valid_argument ("stat", arg))
+      return (1);
+
+   if (stat (arg, &finfo) == -1)
+   {
+      perror (arg);
+      return (1);
+   }
+
+   printf ("Statistics for `%s':\n", arg);
+
+   printf ("%s has %ld link%s, and is %lld byte%s in length.\n", arg,
+         (long) finfo.st_nlink,
+         (finfo.st_nlink == 1) ? "" : "s",
+         (long long) finfo.st_size,
+         (finfo.st_size == 1) ? "" : "s");
+   printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime));
+   printf ("      Last access at: %s", ctime (&finfo.st_atime));
+   printf ("    Last modified at: %s", ctime (&finfo.st_mtime));
+   return (0);
+}
+
+int
+com_delete (char *arg __attribute__((__unused__)))
+{
+   too_dangerous ("delete");
+   return (1);
+}
+
+/* Print out help for ARG, or for all of the commands if ARG is
+   not present. */
+int
+com_help (char *arg)
+{
+   register int i;
+   int printed = 0;
+
+   for (i = 0; commands[i].name; i++)
+   {
+      if (!*arg || (strcmp (arg, commands[i].name) == 0))
+      {
+         printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc);
+         printed++;
+      }
+   }
+
+   if (!printed)
+   {
+      printf ("No commands match `%s'.  Possibilties are:\n", arg);
+
+      for (i = 0; commands[i].name; i++)
+      {
+         /* Print in six columns. */
+         if (printed == 6)
+         {
+            printed = 0;
+            printf ("\n");
+         }
+
+         printf ("%s\t", commands[i].name);
+         printed++;
+      }
+
+      if (printed)
+         printf ("\n");
+   }
+   return (0);
+}
+
+/* Change to the directory ARG. */
+int
+com_cd (char *arg)
+{
+   if (chdir (arg) == -1)
+   {
+      perror (arg);
+      return 1;
+   }
+
+   com_pwd ("");
+   return (0);
+}
+
+/* Print out the current working directory. */
+int
+com_pwd (char* ignore __attribute__((__unused__)))
+{
+   char dir[1024], *s;
+
+   s = (char*)getcwd(dir, sizeof(dir) - 1);
+   if (s == 0)
+   {
+      printf ("Error getting pwd: %s\n", dir);
+      return 1;
+   }
+
+   printf ("Current directory is %s\n", dir);
+   return 0;
+}
+
+/* The user wishes to quit using this program.  Just set DONE
+   non-zero. */
+int 
+com_quit (char *arg __attribute__((__unused__)))
+{
+   done = 1;
+   return (0);
+}
+
+/* Function which tells you that you can't do this. */
+void
+too_dangerous (char *caller)
+{
+   fprintf (stderr,
+         "%s: Too dangerous for me to distribute.\n",
+         caller);
+   fprintf (stderr, "Write it yourself.\n");
+}
+
+/* Return non-zero if ARG is a valid argument for CALLER,
+   else print an error message and return zero. */
+int
+valid_argument (char *caller, char *arg)
+{
+   if (!arg || !*arg)
+   {
+      fprintf (stderr, "%s: Argument required.\n", caller);
+      return (0);
+   }
+
+   return (1);
+}
+
+void *
+xmalloc (size_t size)
+{
+   register void *value = (void*)malloc(size);
+   if (value == 0)
+      fprintf(stderr, "virtual memory exhausted");
+   return value;
+}
+
+
diff --git a/examples/tc1.c b/examples/tc1.c
new file mode 100644
index 0000000..086dc3e
--- /dev/null
+++ b/examples/tc1.c
@@ -0,0 +1,309 @@
+/*	$NetBSD: tc1.c,v 1.5 2010/04/18 21:17:47 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#ifndef lint
+__COPYRIGHT("@(#) Copyright (c) 1992, 1993\n\
+	The Regents of the University of California.  All rights reserved.\n");
+#endif /* not lint */
+
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)test.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: tc1.c,v 1.5 2010/04/18 21:17:47 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/* from src/sys/sys/cdefs.h */
+#ifndef __UNCONST
+# define __UNCONST(a) ((void *)(unsigned long)(const void *)(a))
+#endif
+
+/*
+ * test.c: A little test program
+ */
+#include <stdio.h>
+#include <string.h>
+#include <signal.h>
+#include <sys/wait.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <locale.h>
+
+#include "histedit.h"
+
+static int continuation = 0;
+volatile sig_atomic_t gotsig = 0;
+
+static	unsigned char	complete(EditLine *, int);
+	int	main(int, char **);
+static	char   *prompt(EditLine *);
+static	void	sig(int);
+
+static char *
+prompt(EditLine *el __attribute__((__unused__)))
+{
+	static char a[] = "\1\033[7m\1Edit$\1\033[0m\1 ";
+	static char b[] = "Edit> ";
+
+	return (continuation ? b : a);
+}
+
+static void
+sig(int i)
+{
+	gotsig = i;
+}
+
+static unsigned char
+complete(EditLine *el, int ch __attribute__((__unused__)))
+{
+	DIR *dd = opendir(".");
+	struct dirent *dp;
+	const char* ptr;
+	const LineInfo *lf = el_line(el);
+	size_t len;
+	int res = CC_ERROR;
+
+	/*
+	 * Find the last word
+	 */
+	for (ptr = lf->cursor - 1;
+	    !isspace((unsigned char)*ptr) && ptr > lf->buffer; ptr--)
+		continue;
+	len = lf->cursor - ++ptr;
+
+	for (dp = readdir(dd); dp != NULL; dp = readdir(dd)) {
+		if (len > strlen(dp->d_name))
+			continue;
+		if (strncmp(dp->d_name, ptr, len) == 0) {
+			if (el_insertstr(el, &dp->d_name[len]) == -1)
+				res = CC_ERROR;
+			else
+				res = CC_REFRESH;
+			break;
+		}
+	}
+
+	closedir(dd);
+	return res;
+}
+
+int
+main(int argc __attribute__((__unused__)), char *argv[])
+{
+	EditLine *el = NULL;
+	int num;
+	const char *buf;
+	Tokenizer *tok;
+#if 0
+	int lastevent = 0;
+#endif
+	int ncontinuation;
+	History *hist;
+	HistEvent ev;
+
+	(void) setlocale(LC_CTYPE, "");
+	(void) signal(SIGINT, sig);
+	(void) signal(SIGQUIT, sig);
+	(void) signal(SIGHUP, sig);
+	(void) signal(SIGTERM, sig);
+
+	hist = history_init();		/* Init the builtin history	*/
+					/* Remember 100 events		*/
+	history(hist, &ev, H_SETSIZE, 100);
+
+	tok  = tok_init(NULL);		/* Initialize the tokenizer	*/
+
+					/* Initialize editline		*/
+	el = el_init(*argv, stdin, stdout, stderr);
+
+	el_set(el, EL_EDITOR, "vi");	/* Default editor is vi		*/
+	el_set(el, EL_SIGNAL, 1);	/* Handle signals gracefully	*/
+	el_set(el, EL_PROMPT_ESC, prompt, '\1');/* Set the prompt function */
+
+			/* Tell editline to use this history interface	*/
+	el_set(el, EL_HIST, history, hist);
+
+					/* Add a user-defined function	*/
+	el_set(el, EL_ADDFN, "ed-complete", "Complete argument", complete);
+
+					/* Bind tab to it 		*/
+	el_set(el, EL_BIND, "^I", "ed-complete", NULL);
+
+	/*
+	 * Bind j, k in vi command mode to previous and next line, instead
+	 * of previous and next history.
+	 */
+	el_set(el, EL_BIND, "-a", "k", "ed-prev-line", NULL);
+	el_set(el, EL_BIND, "-a", "j", "ed-next-line", NULL);
+
+	/*
+	 * Source the user's defaults file.
+	 */
+	el_source(el, NULL);
+
+	while ((buf = el_gets(el, &num)) != NULL && num != 0)  {
+		int ac, cc, co;
+#ifdef DEBUG
+		int i;
+#endif
+		const char **av;
+		const LineInfo *li;
+		li = el_line(el);
+#ifdef DEBUG
+		(void) fprintf(stderr, "==> got %d %s", num, buf);
+		(void) fprintf(stderr, "  > li `%.*s_%.*s'\n",
+		    (li->cursor - li->buffer), li->buffer,
+		    (li->lastchar - 1 - li->cursor),
+		    (li->cursor >= li->lastchar) ? "" : li->cursor);
+
+#endif
+		if (gotsig) {
+			(void) fprintf(stderr, "Got signal %d.\n", gotsig);
+			gotsig = 0;
+			el_reset(el);
+		}
+
+		if (!continuation && num == 1)
+			continue;
+
+		ac = cc = co = 0;
+		ncontinuation = tok_line(tok, li, &ac, &av, &cc, &co);
+		if (ncontinuation < 0) {
+			(void) fprintf(stderr, "Internal error\n");
+			continuation = 0;
+			continue;
+		}
+#ifdef DEBUG
+		(void) fprintf(stderr, "  > nc %d ac %d cc %d co %d\n",
+		    ncontinuation, ac, cc, co);
+#endif
+#if 0
+		if (continuation) {
+			/*
+			 * Append to the right event in case the user
+			 * moved around in history.
+			 */
+			if (history(hist, &ev, H_SET, lastevent) == -1)
+				err(1, "%d: %s", lastevent, ev.str);
+			history(hist, &ev, H_ADD , buf);
+		} else {
+			history(hist, &ev, H_ENTER, buf);
+			lastevent = ev.num;
+		}
+#else
+				/* Simpler */
+		history(hist, &ev, continuation ? H_APPEND : H_ENTER, buf);
+#endif
+
+		continuation = ncontinuation;
+		ncontinuation = 0;
+		if (continuation)
+			continue;
+#ifdef DEBUG
+		for (i = 0; i < ac; i++) {
+			(void) fprintf(stderr, "  > arg# %2d ", i);
+			if (i != cc)
+				(void) fprintf(stderr, "`%s'\n", av[i]);
+			else
+				(void) fprintf(stderr, "`%.*s_%s'\n",
+				    co, av[i], av[i] + co);
+		}
+#endif
+
+		if (strcmp(av[0], "history") == 0) {
+			int rv;
+
+			switch (ac) {
+			case 1:
+				for (rv = history(hist, &ev, H_LAST); rv != -1;
+				    rv = history(hist, &ev, H_PREV))
+					(void) fprintf(stdout, "%4d %s",
+					    ev.num, ev.str);
+				break;
+
+			case 2:
+				if (strcmp(av[1], "clear") == 0)
+					 history(hist, &ev, H_CLEAR);
+				else
+					 goto badhist;
+				break;
+
+			case 3:
+				if (strcmp(av[1], "load") == 0)
+					 history(hist, &ev, H_LOAD, av[2]);
+				else if (strcmp(av[1], "save") == 0)
+					 history(hist, &ev, H_SAVE, av[2]);
+				break;
+
+			badhist:
+			default:
+				(void) fprintf(stderr,
+				    "Bad history arguments\n");
+				break;
+			}
+		} else if (el_parse(el, ac, av) == -1) {
+			switch (fork()) {
+			case 0:
+				execvp(av[0], (char *const *)__UNCONST(av));
+				perror(av[0]);
+				_exit(1);
+				/*NOTREACHED*/
+				break;
+
+			case -1:
+				perror("fork");
+				break;
+
+			default:
+				if (wait(&num) == -1)
+					perror("wait");
+				(void) fprintf(stderr, "Exit %x\n", num);
+				break;
+			}
+		}
+
+		tok_reset(tok);
+	}
+
+	el_end(el);
+	tok_end(tok);
+	history_end(hist);
+
+	return (0);
+}
diff --git a/examples/wtc1.c b/examples/wtc1.c
new file mode 100644
index 0000000..28372a8
--- /dev/null
+++ b/examples/wtc1.c
@@ -0,0 +1,278 @@
+#include <stdio.h>
+#include <string.h>
+#include <signal.h>
+#include <sys/wait.h>
+#include <err.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <limits.h>
+#include <locale.h>
+
+#include <histedit.h>
+
+
+static int continuation;
+volatile sig_atomic_t gotsig;
+static const char hfile[] = ".whistory";
+
+static wchar_t *
+prompt(EditLine *el)
+{
+	static wchar_t a[] = L"\1\033[7m\1Edit$\1\033[0m\1 ";
+	static wchar_t b[] = L"Edit> ";
+
+	return continuation ? b : a;
+}
+
+
+static void
+sig(int i)
+{
+	gotsig = i;
+}
+
+const char *
+my_wcstombs(const wchar_t *wstr)
+{
+	static struct {
+		char *str;
+		int len;
+	} buf;
+
+	int needed = wcstombs(0, wstr, 0) + 1;
+	if (needed > buf.len) {
+		buf.str = malloc(needed);
+		buf.len = needed;
+	}
+	wcstombs(buf.str, wstr, needed);
+	buf.str[needed - 1] = 0;
+
+	return buf.str;
+}
+
+
+static unsigned char
+complete(EditLine *el, int ch)
+{
+	DIR *dd = opendir(".");
+	struct dirent *dp;
+	const wchar_t *ptr;
+	char *buf, *bptr;
+	const LineInfoW *lf = el_wline(el);
+	int len, mblen, i;
+	unsigned char res = 0;
+	wchar_t dir[1024];
+
+	/* Find the last word */
+	for (ptr = lf->cursor -1; !iswspace(*ptr) && ptr > lf->buffer; --ptr)
+		continue;
+	len = lf->cursor - ++ptr;
+
+	/* Convert last word to multibyte encoding, so we can compare to it */
+	wctomb(NULL, 0); /* Reset shift state */
+	mblen = MB_LEN_MAX * len + 1;
+	buf = bptr = malloc(mblen);
+	if (buf == NULL)
+		err(1, "malloc");
+	for (i = 0; i < len; ++i) {
+		/* Note: really should test for -1 return from wctomb */
+		bptr += wctomb(bptr, ptr[i]);
+	}
+	*bptr = 0; /* Terminate multibyte string */
+	mblen = bptr - buf;
+
+	/* Scan directory for matching name */
+	for (dp = readdir(dd); dp != NULL; dp = readdir(dd)) {
+		if (mblen > strlen(dp->d_name))
+			continue;
+		if (strncmp(dp->d_name, buf, mblen) == 0) {
+			mbstowcs(dir, &dp->d_name[mblen],
+			    sizeof(dir) / sizeof(*dir));
+			if (el_winsertstr(el, dir) == -1)
+				res = CC_ERROR;
+			else
+				res = CC_REFRESH;
+			break;
+		}
+	}
+
+	closedir(dd);
+	free(buf);
+	return res;
+}
+
+
+int
+main(int argc, char *argv[])
+{
+	EditLine *el = NULL;
+	int numc, ncontinuation;
+	const wchar_t *line;
+	TokenizerW *tok;
+	HistoryW *hist;
+	HistEventW ev;
+#ifdef DEBUG
+	int i;
+#endif
+
+	setlocale(LC_ALL, "");
+
+	(void)signal(SIGINT,  sig);
+	(void)signal(SIGQUIT, sig);
+	(void)signal(SIGHUP,  sig);
+	(void)signal(SIGTERM, sig);
+
+	hist = history_winit();		/* Init built-in history     */
+	history_w(hist, &ev, H_SETSIZE, 100);	/* Remember 100 events	     */
+	history_w(hist, &ev, H_LOAD, hfile);
+
+	tok = tok_winit(NULL);			/* Init the tokenizer	     */
+
+	el = el_init(argv[0], stdin, stdout, stderr);
+
+	el_wset(el, EL_EDITOR, L"vi");		/* Default editor is vi	     */
+	el_wset(el, EL_SIGNAL, 1);		/* Handle signals gracefully */
+	el_wset(el, EL_PROMPT_ESC, prompt, '\1'); /* Set the prompt function */
+
+	el_wset(el, EL_HIST, history_w, hist);	/* FIXME - history_w? */
+
+					/* Add a user-defined function	*/
+	el_wset(el, EL_ADDFN, L"ed-complete", L"Complete argument", complete);
+
+					/* Bind <tab> to it */
+	el_wset(el, EL_BIND, L"^I", L"ed-complete", NULL);
+
+	/*
+	* Bind j, k in vi command mode to previous and next line, instead
+	* of previous and next history.
+	*/
+	el_wset(el, EL_BIND, L"-a", L"k", L"ed-prev-line", NULL);
+	el_wset(el, EL_BIND, L"-a", L"j", L"ed-next-line", NULL);
+
+	/* Source the user's defaults file. */
+	el_source(el, NULL);
+
+	while((line = el_wgets(el, &numc)) != NULL && numc != 0) {
+		int ac, cc, co, rc;
+		const wchar_t **av;
+
+		const LineInfoW *li;
+		li = el_wline(el);
+
+#ifdef DEBUG
+		(void)fwprintf(stderr, L"==> got %d %ls", numc, line);
+		(void)fwprintf(stderr, L"  > li `%.*ls_%.*ls'\n",
+		    (li->cursor - li->buffer), li->buffer,
+		    (li->lastchar - 1 - li->cursor),
+		    (li->cursor >= li->lastchar) ? L"" : li->cursor);
+#endif
+
+		if (gotsig) {
+			(void)fprintf(stderr, "Got signal %d.\n", gotsig);
+			gotsig = 0;
+			el_reset(el);
+		}
+
+		if(!continuation && numc == 1)
+			continue;	/* Only got a linefeed */
+
+		ac = cc = co = 0;
+		ncontinuation = tok_wline(tok, li, &ac, &av, &cc, &co);
+		if (ncontinuation < 0) {
+			(void) fprintf(stderr, "Internal error\n");
+			continuation = 0;
+			continue;
+		}
+
+#ifdef DEBUG
+		(void)fprintf(stderr, "  > nc %d ac %d cc %d co %d\n",
+			ncontinuation, ac, cc, co);
+#endif
+		history_w(hist, &ev, continuation ? H_APPEND : H_ENTER, line);
+
+		continuation = ncontinuation;
+		ncontinuation = 0;
+		if(continuation)
+			continue;
+
+#ifdef DEBUG
+		for (i = 0; i < ac; ++i) {
+			(void)fwprintf(stderr, L"  > arg# %2d ", i);
+			if (i != cc)
+				(void)fwprintf(stderr, L"`%ls'\n", av[i]);
+			else
+				(void)fwprintf(stderr, L"`%.*ls_%ls'\n",
+				    co, av[i], av[i] + co);
+		}
+#endif
+
+		if (wcscmp (av[0], L"history") == 0) {
+			switch(ac) {
+			case 1:
+				for(rc = history_w(hist, &ev, H_LAST);
+				     rc != -1;
+				     rc = history_w(hist, &ev, H_PREV))
+					(void)fwprintf(stdout, L"%4d %ls",
+					     ev.num, ev.str);
+				break;
+			case 2:
+				if (wcscmp(av[1], L"clear") == 0)
+					history_w(hist, &ev, H_CLEAR);
+				else
+					goto badhist;
+				break;
+			case 3:
+				if (wcscmp(av[1], L"load") == 0)
+					history_w(hist, &ev, H_LOAD,
+					    my_wcstombs(av[2]));
+				else if (wcscmp(av[1], L"save") == 0)
+					history_w(hist, &ev, H_SAVE,
+					    my_wcstombs(av[2]));
+				else
+					goto badhist;
+				break;
+			badhist:
+			default:
+				(void)fprintf(stderr,
+				    "Bad history arguments\n");
+				break;
+			}
+		} else if (el_wparse(el, ac, av) == -1) {
+			switch (fork()) {
+			case 0: {
+				Tokenizer *ntok = tok_init(NULL);
+				int nargc;
+				const char **nav;
+				tok_str(ntok, my_wcstombs(line), &nargc, &nav);
+				execvp(nav[0],(char **)nav);
+				perror(nav[0]);
+				_exit(1);
+				/* NOTREACHED */
+				break;
+			}
+			case -1:
+				perror("fork");
+				break;
+			default:
+				if (wait(&rc) == -1)
+					perror("wait");
+				(void)fprintf(stderr, "Exit %x\n", rc);
+				break;
+			}
+		}
+
+		tok_wreset(tok);
+	}
+
+	el_end(el);
+	tok_wend(tok);
+	history_w(hist, &ev, H_SAVE, hfile);
+	history_wend(hist);
+
+	fprintf(stdout, "\n");
+	return 0;
+}
+
+
diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..377bb86
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-11-20.07; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/libedit.pc.in b/libedit.pc.in
new file mode 100644
index 0000000..deaaa39
--- /dev/null
+++ b/libedit.pc.in
@@ -0,0 +1,12 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: libedit
+Description: command line editor library provides generic line editing, history, and tokenization functions.
+Version: @VERSION@
+Requires:
+Libs: -L${libdir} -ledit @LIBS@
+Cflags: -I${includedir} -I${includedir}/editline
+
diff --git a/ltmain.sh b/ltmain.sh
new file mode 100644
index 0000000..63ae69d
--- /dev/null
+++ b/ltmain.sh
@@ -0,0 +1,9655 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $opt_debug
+
+    func_error "missing argument for $1."
+    exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
+
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+	  for arg in $args; do
+	    IFS="$save_ifs"
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS="$save_ifs"
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with \`-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
+    lobj=${xdir}$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module="${wl}-single_module"
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps ; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "\`-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=yes
+		;;
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      else
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for \`$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for \`$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname="$func_basename_result"
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    echo
+	    if test "$linkmode" = prog; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$absdir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
+	      else
+		add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path="-L$absdir/$objdir"
+		  ;;
+		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	shift
+	IFS="$save_ifs"
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|qnx|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$1"
+	  revision="$2"
+	  age="$3"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":${current}.0"
+	  ;;
+
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_append libobjs " $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
+      if test "$opt_mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=""
+		    ;;
+		  esac
+		fi
+		if test -n "$i" ; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname="$1"
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS="$save_ifs"
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    fi
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$opt_mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$opt_mode" = relink; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	else
+	  gentop="$output_objdir/${obj}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
+
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=yes
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    func_append oldobjs " $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name="$func_basename_result"
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+    func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
+	odir="$objdir"
+      else
+	odir="$dir/$objdir"
+      fi
+      func_basename "$file"
+      name="$func_basename_result"
+      test "$opt_mode" = uninstall && odir="$dir"
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case "$opt_mode" in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$opt_mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
diff --git a/m4/libtool.m4 b/m4/libtool.m4
new file mode 100644
index 0000000..44e0ecf
--- /dev/null
+++ b/m4/libtool.m4
@@ -0,0 +1,7982 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    _LT_PATH_MAGIC
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_REPLACE_SHELLFNS
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
+    ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*" 
+}
+
+case "$ECHO" in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[  --with-sysroot[=DIR] Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([${with_sysroot}])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$5], , :, [$5])
+else
+    m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$4], , :, [$4])
+else
+    m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}]
+_LT_EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+    ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[23]].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
+
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT@&t@_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX([$1])
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX([$1])
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
+
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS="$save_LDFLAGS"])
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX([$1])
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX([$1])
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+	      '"$_LT_TAGVAR(reload_cmds, $1)"
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC* | sunCC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary parameter first.
+    func_stripname_result=${3}
+    func_stripname_result=${func_stripname_result#"${1}"}
+    func_stripname_result=${func_stripname_result%"${2}"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+    func_split_long_opt_name=${1%%=*}
+    func_split_long_opt_arg=${1#*=}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+    func_split_short_opt_arg=${1#??}
+    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+    case ${1} in
+      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+      *)    func_lo2o_result=${1} ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+
+  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+
+  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+    func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
new file mode 100644
index 0000000..5d9acd8
--- /dev/null
+++ b/m4/ltoptions.m4
@@ -0,0 +1,384 @@
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+#   Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/m4/ltsugar.m4 b/m4/ltsugar.m4
new file mode 100644
index 0000000..9000a05
--- /dev/null
+++ b/m4/ltsugar.m4
@@ -0,0 +1,123 @@
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
new file mode 100644
index 0000000..07a8602
--- /dev/null
+++ b/m4/ltversion.m4
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
new file mode 100644
index 0000000..c573da9
--- /dev/null
+++ b/m4/lt~obsolete.m4
@@ -0,0 +1,98 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/missing b/missing
new file mode 100755
index 0000000..cdea514
--- /dev/null
+++ b/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2012-06-26.16; # UTC
+
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'automa4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/src/Makefile.am b/src/Makefile.am
new file mode 100644
index 0000000..da68023
--- /dev/null
+++ b/src/Makefile.am
@@ -0,0 +1,70 @@
+
+BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h fcns.c help.c
+if WIDECHAR
+BUILT_SOURCES += tokenizern.c historyn.c
+endif
+
+AHDR= vi.h emacs.h common.h 
+ASRC= $(srcdir)/vi.c $(srcdir)/emacs.c $(srcdir)/common.c
+
+vi.h: Makefile $(srcdir)/vi.c
+	AWK=$(AWK) sh $(srcdir)/makelist -h $(srcdir)/vi.c > $@
+
+emacs.h: Makefile $(srcdir)/emacs.c
+	AWK=$(AWK) sh $(srcdir)/makelist -h $(srcdir)/emacs.c > $@
+
+common.h: Makefile $(srcdir)/common.c
+	AWK=$(AWK) sh $(srcdir)/makelist -h $(srcdir)/common.c > $@
+
+fcns.h: Makefile $(AHDR)
+	AWK=$(AWK) sh $(srcdir)/makelist -fh $(AHDR) > $@
+
+help.h: Makefile $(ASRC)
+	AWK=$(AWK) sh $(srcdir)/makelist -bh $(ASRC) > $@
+
+fcns.c: Makefile $(AHDR)
+	AWK=$(AWK) sh $(srcdir)/makelist -fc $(AHDR) > $@
+
+help.c: Makefile $(ASRC)
+	AWK=$(AWK) sh $(srcdir)/makelist -bc $(ASRC) > $@
+
+tokenizern.c: Makefile $(srcdir)/tokenizer.c
+	AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/tokenizer.c > $@
+
+historyn.c: Makefile $(srcdir)/history.c
+	AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/history.c > $@
+
+CLEANFILES = $(BUILT_SOURCES)
+
+lib_LTLIBRARIES    = libedit.la
+libedit_la_SOURCES = chared.c common.c el.c emacs.c hist.c keymacro.c map.c chartype.c parse.c \
+							prompt.c read.c refresh.c search.c sig.c terminal.c tty.c vi.c \
+							fgetln.c wcsdup.c tokenizer.c \
+							history.c filecomplete.c readline.c chared.h el.h hist.h \
+							histedit.h keymacro.h map.h chartype.h parse.h prompt.h read.h refresh.h \
+							search.h sig.h sys.h terminal.h tty.h vis.h filecomplete.h \
+							editline/readline.h
+
+if !HAVE_STRLCPY
+libedit_la_SOURCES += strlcpy.c
+endif
+if !HAVE_STRLCAT
+libedit_la_SOURCES += strlcat.c
+endif
+if !HAVE_VIS
+libedit_la_SOURCES += vis.c
+endif
+if !HAVE_UNVIS
+libedit_la_SOURCES += unvis.c
+endif
+if WIDECHAR
+libedit_la_SOURCES += eln.c
+endif
+
+EXTRA_DIST = makelist shlib_version
+nobase_include_HEADERS = histedit.h editline/readline.h
+
+nodist_libedit_la_SOURCES = $(BUILT_SOURCES)
+
+libedit_la_LDFLAGS = -no-undefined -version-info $(LT_VERSION)
+
diff --git a/src/Makefile.in b/src/Makefile.in
new file mode 100644
index 0000000..474441c
--- /dev/null
+++ b/src/Makefile.in
@@ -0,0 +1,767 @@
+# Makefile.in generated by automake 1.14 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@WIDECHAR_TRUE@am__append_1 = tokenizern.c historyn.c
+@HAVE_STRLCPY_FALSE@am__append_2 = strlcpy.c
+@HAVE_STRLCAT_FALSE@am__append_3 = strlcat.c
+@HAVE_VIS_FALSE@am__append_4 = vis.c
+@HAVE_UNVIS_FALSE@am__append_5 = unvis.c
+@WIDECHAR_TRUE@am__append_6 = eln.c
+subdir = src
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/depcomp $(nobase_include_HEADERS)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libedit_la_LIBADD =
+am__libedit_la_SOURCES_DIST = chared.c common.c el.c emacs.c hist.c \
+	keymacro.c map.c chartype.c parse.c prompt.c read.c refresh.c \
+	search.c sig.c terminal.c tty.c vi.c fgetln.c wcsdup.c \
+	tokenizer.c history.c filecomplete.c readline.c chared.h el.h \
+	hist.h histedit.h keymacro.h map.h chartype.h parse.h prompt.h \
+	read.h refresh.h search.h sig.h sys.h terminal.h tty.h vis.h \
+	filecomplete.h editline/readline.h strlcpy.c strlcat.c vis.c \
+	unvis.c eln.c
+@HAVE_STRLCPY_FALSE@am__objects_1 = strlcpy.lo
+@HAVE_STRLCAT_FALSE@am__objects_2 = strlcat.lo
+@HAVE_VIS_FALSE@am__objects_3 = vis.lo
+@HAVE_UNVIS_FALSE@am__objects_4 = unvis.lo
+@WIDECHAR_TRUE@am__objects_5 = eln.lo
+am_libedit_la_OBJECTS = chared.lo common.lo el.lo emacs.lo hist.lo \
+	keymacro.lo map.lo chartype.lo parse.lo prompt.lo read.lo \
+	refresh.lo search.lo sig.lo terminal.lo tty.lo vi.lo fgetln.lo \
+	wcsdup.lo tokenizer.lo history.lo filecomplete.lo readline.lo \
+	$(am__objects_1) $(am__objects_2) $(am__objects_3) \
+	$(am__objects_4) $(am__objects_5)
+@WIDECHAR_TRUE@am__objects_6 = tokenizern.lo historyn.lo
+am__objects_7 = fcns.lo help.lo $(am__objects_6)
+nodist_libedit_la_OBJECTS = $(am__objects_7)
+libedit_la_OBJECTS = $(am_libedit_la_OBJECTS) \
+	$(nodist_libedit_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libedit_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libedit_la_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libedit_la_SOURCES) $(nodist_libedit_la_SOURCES)
+DIST_SOURCES = $(am__libedit_la_SOURCES_DIST)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+HEADERS = $(nobase_include_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_VERSION = @LT_VERSION@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NROFF = @NROFF@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h fcns.c help.c \
+	$(am__append_1)
+AHDR = vi.h emacs.h common.h 
+ASRC = $(srcdir)/vi.c $(srcdir)/emacs.c $(srcdir)/common.c
+CLEANFILES = $(BUILT_SOURCES)
+lib_LTLIBRARIES = libedit.la
+libedit_la_SOURCES = chared.c common.c el.c emacs.c hist.c keymacro.c \
+	map.c chartype.c parse.c prompt.c read.c refresh.c search.c \
+	sig.c terminal.c tty.c vi.c fgetln.c wcsdup.c tokenizer.c \
+	history.c filecomplete.c readline.c chared.h el.h hist.h \
+	histedit.h keymacro.h map.h chartype.h parse.h prompt.h read.h \
+	refresh.h search.h sig.h sys.h terminal.h tty.h vis.h \
+	filecomplete.h editline/readline.h $(am__append_2) \
+	$(am__append_3) $(am__append_4) $(am__append_5) \
+	$(am__append_6)
+EXTRA_DIST = makelist shlib_version
+nobase_include_HEADERS = histedit.h editline/readline.h
+nodist_libedit_la_SOURCES = $(BUILT_SOURCES)
+libedit_la_LDFLAGS = -no-undefined -version-info $(LT_VERSION)
+all: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libedit.la: $(libedit_la_OBJECTS) $(libedit_la_DEPENDENCIES) $(EXTRA_libedit_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(libedit_la_LINK) -rpath $(libdir) $(libedit_la_OBJECTS) $(libedit_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chared.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chartype.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/el.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eln.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/emacs.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fcns.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fgetln.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filecomplete.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/help.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hist.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/history.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/historyn.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keymacro.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/map.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prompt.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readline.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/refresh.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/search.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sig.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strlcat.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strlcpy.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/terminal.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tokenizer.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tokenizern.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tty.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unvis.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vi.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vis.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wcsdup.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-nobase_includeHEADERS: $(nobase_include_HEADERS)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \
+	    echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \
+	    $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(LTLIBRARIES) $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-nobase_includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES uninstall-nobase_includeHEADERS
+
+.MAKE: all check install install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+	clean-libLTLIBRARIES clean-libtool cscopelist-am ctags \
+	ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-libLTLIBRARIES install-man \
+	install-nobase_includeHEADERS install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-libLTLIBRARIES \
+	uninstall-nobase_includeHEADERS
+
+
+vi.h: Makefile $(srcdir)/vi.c
+	AWK=$(AWK) sh $(srcdir)/makelist -h $(srcdir)/vi.c > $@
+
+emacs.h: Makefile $(srcdir)/emacs.c
+	AWK=$(AWK) sh $(srcdir)/makelist -h $(srcdir)/emacs.c > $@
+
+common.h: Makefile $(srcdir)/common.c
+	AWK=$(AWK) sh $(srcdir)/makelist -h $(srcdir)/common.c > $@
+
+fcns.h: Makefile $(AHDR)
+	AWK=$(AWK) sh $(srcdir)/makelist -fh $(AHDR) > $@
+
+help.h: Makefile $(ASRC)
+	AWK=$(AWK) sh $(srcdir)/makelist -bh $(ASRC) > $@
+
+fcns.c: Makefile $(AHDR)
+	AWK=$(AWK) sh $(srcdir)/makelist -fc $(AHDR) > $@
+
+help.c: Makefile $(ASRC)
+	AWK=$(AWK) sh $(srcdir)/makelist -bc $(ASRC) > $@
+
+tokenizern.c: Makefile $(srcdir)/tokenizer.c
+	AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/tokenizer.c > $@
+
+historyn.c: Makefile $(srcdir)/history.c
+	AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/history.c > $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/src/chared.c b/src/chared.c
new file mode 100644
index 0000000..3886f0b
--- /dev/null
+++ b/src/chared.c
@@ -0,0 +1,759 @@
+/*	$NetBSD: chared.c,v 1.38 2013/07/12 17:48:29 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)chared.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: chared.c,v 1.38 2013/07/12 17:48:29 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * chared.c: Character editor utilities
+ */
+#include <stdlib.h>
+#include "el.h"
+
+private void ch__clearmacro (EditLine *);
+
+/* value to leave unused in line buffer */
+#define	EL_LEAVE	2
+
+/* cv_undo():
+ *	Handle state for the vi undo command
+ */
+protected void
+cv_undo(EditLine *el)
+{
+	c_undo_t *vu = &el->el_chared.c_undo;
+	c_redo_t *r = &el->el_chared.c_redo;
+	size_t size;
+
+	/* Save entire line for undo */
+	size = (size_t)(el->el_line.lastchar - el->el_line.buffer);
+	vu->len = (ssize_t)size;
+	vu->cursor = (int)(el->el_line.cursor - el->el_line.buffer);
+	(void)memcpy(vu->buf, el->el_line.buffer, size * sizeof(*vu->buf));
+
+	/* save command info for redo */
+	r->count = el->el_state.doingarg ? el->el_state.argument : 0;
+	r->action = el->el_chared.c_vcmd.action;
+	r->pos = r->buf;
+	r->cmd = el->el_state.thiscmd;
+	r->ch = el->el_state.thisch;
+}
+
+/* cv_yank():
+ *	Save yank/delete data for paste
+ */
+protected void
+cv_yank(EditLine *el, const Char *ptr, int size)
+{
+	c_kill_t *k = &el->el_chared.c_kill;
+
+	(void)memcpy(k->buf, ptr, (size_t)size * sizeof(*k->buf));
+	k->last = k->buf + size;
+}
+
+
+/* c_insert():
+ *	Insert num characters
+ */
+protected void
+c_insert(EditLine *el, int num)
+{
+	Char *cp;
+
+	if (el->el_line.lastchar + num >= el->el_line.limit) {
+		if (!ch_enlargebufs(el, (size_t)num))
+			return;		/* can't go past end of buffer */
+	}
+
+	if (el->el_line.cursor < el->el_line.lastchar) {
+		/* if I must move chars */
+		for (cp = el->el_line.lastchar; cp >= el->el_line.cursor; cp--)
+			cp[num] = *cp;
+	}
+	el->el_line.lastchar += num;
+}
+
+
+/* c_delafter():
+ *	Delete num characters after the cursor
+ */
+protected void
+c_delafter(EditLine *el, int num)
+{
+
+	if (el->el_line.cursor + num > el->el_line.lastchar)
+		num = (int)(el->el_line.lastchar - el->el_line.cursor);
+
+	if (el->el_map.current != el->el_map.emacs) {
+		cv_undo(el);
+		cv_yank(el, el->el_line.cursor, num);
+	}
+
+	if (num > 0) {
+		Char *cp;
+
+		for (cp = el->el_line.cursor; cp <= el->el_line.lastchar; cp++)
+			*cp = cp[num];
+
+		el->el_line.lastchar -= num;
+	}
+}
+
+
+/* c_delafter1():
+ *	Delete the character after the cursor, do not yank
+ */
+protected void
+c_delafter1(EditLine *el)
+{
+	Char *cp;
+
+	for (cp = el->el_line.cursor; cp <= el->el_line.lastchar; cp++)
+		*cp = cp[1];
+
+	el->el_line.lastchar--;
+}
+
+
+/* c_delbefore():
+ *	Delete num characters before the cursor
+ */
+protected void
+c_delbefore(EditLine *el, int num)
+{
+
+	if (el->el_line.cursor - num < el->el_line.buffer)
+		num = (int)(el->el_line.cursor - el->el_line.buffer);
+
+	if (el->el_map.current != el->el_map.emacs) {
+		cv_undo(el);
+		cv_yank(el, el->el_line.cursor - num, num);
+	}
+
+	if (num > 0) {
+		Char *cp;
+
+		for (cp = el->el_line.cursor - num;
+		    cp <= el->el_line.lastchar;
+		    cp++)
+			*cp = cp[num];
+
+		el->el_line.lastchar -= num;
+	}
+}
+
+
+/* c_delbefore1():
+ *	Delete the character before the cursor, do not yank
+ */
+protected void
+c_delbefore1(EditLine *el)
+{
+	Char *cp;
+
+	for (cp = el->el_line.cursor - 1; cp <= el->el_line.lastchar; cp++)
+		*cp = cp[1];
+
+	el->el_line.lastchar--;
+}
+
+
+/* ce__isword():
+ *	Return if p is part of a word according to emacs
+ */
+protected int
+ce__isword(Int p)
+{
+	return Isalnum(p) || Strchr(STR("*?_-.[]~="), p) != NULL;
+}
+
+
+/* cv__isword():
+ *	Return if p is part of a word according to vi
+ */
+protected int
+cv__isword(Int p)
+{
+	if (Isalnum(p) || p == '_')
+		return 1;
+	if (Isgraph(p))
+		return 2;
+	return 0;
+}
+
+
+/* cv__isWord():
+ *	Return if p is part of a big word according to vi
+ */
+protected int
+cv__isWord(Int p)
+{
+	return !Isspace(p);
+}
+
+
+/* c__prev_word():
+ *	Find the previous word
+ */
+protected Char *
+c__prev_word(Char *p, Char *low, int n, int (*wtest)(Int))
+{
+	p--;
+
+	while (n--) {
+		while ((p >= low) && !(*wtest)(*p))
+			p--;
+		while ((p >= low) && (*wtest)(*p))
+			p--;
+	}
+
+	/* cp now points to one character before the word */
+	p++;
+	if (p < low)
+		p = low;
+	/* cp now points where we want it */
+	return p;
+}
+
+
+/* c__next_word():
+ *	Find the next word
+ */
+protected Char *
+c__next_word(Char *p, Char *high, int n, int (*wtest)(Int))
+{
+	while (n--) {
+		while ((p < high) && !(*wtest)(*p))
+			p++;
+		while ((p < high) && (*wtest)(*p))
+			p++;
+	}
+	if (p > high)
+		p = high;
+	/* p now points where we want it */
+	return p;
+}
+
+/* cv_next_word():
+ *	Find the next word vi style
+ */
+protected Char *
+cv_next_word(EditLine *el, Char *p, Char *high, int n, int (*wtest)(Int))
+{
+	int test;
+
+	while (n--) {
+		test = (*wtest)(*p);
+		while ((p < high) && (*wtest)(*p) == test)
+			p++;
+		/*
+		 * vi historically deletes with cw only the word preserving the
+		 * trailing whitespace! This is not what 'w' does..
+		 */
+		if (n || el->el_chared.c_vcmd.action != (DELETE|INSERT))
+			while ((p < high) && Isspace(*p))
+				p++;
+	}
+
+	/* p now points where we want it */
+	if (p > high)
+		return high;
+	else
+		return p;
+}
+
+
+/* cv_prev_word():
+ *	Find the previous word vi style
+ */
+protected Char *
+cv_prev_word(Char *p, Char *low, int n, int (*wtest)(Int))
+{
+	int test;
+
+	p--;
+	while (n--) {
+		while ((p > low) && Isspace(*p))
+			p--;
+		test = (*wtest)(*p);
+		while ((p >= low) && (*wtest)(*p) == test)
+			p--;
+	}
+	p++;
+
+	/* p now points where we want it */
+	if (p < low)
+		return low;
+	else
+		return p;
+}
+
+
+/* cv_delfini():
+ *	Finish vi delete action
+ */
+protected void
+cv_delfini(EditLine *el)
+{
+	int size;
+	int action = el->el_chared.c_vcmd.action;
+
+	if (action & INSERT)
+		el->el_map.current = el->el_map.key;
+
+	if (el->el_chared.c_vcmd.pos == 0)
+		/* sanity */
+		return;
+
+	size = (int)(el->el_line.cursor - el->el_chared.c_vcmd.pos);
+	if (size == 0)
+		size = 1;
+	el->el_line.cursor = el->el_chared.c_vcmd.pos;
+	if (action & YANK) {
+		if (size > 0)
+			cv_yank(el, el->el_line.cursor, size);
+		else
+			cv_yank(el, el->el_line.cursor + size, -size);
+	} else {
+		if (size > 0) {
+			c_delafter(el, size);
+			re_refresh_cursor(el);
+		} else  {
+			c_delbefore(el, -size);
+			el->el_line.cursor += size;
+		}
+	}
+	el->el_chared.c_vcmd.action = NOP;
+}
+
+
+/* cv__endword():
+ *	Go to the end of this word according to vi
+ */
+protected Char *
+cv__endword(Char *p, Char *high, int n, int (*wtest)(Int))
+{
+	int test;
+
+	p++;
+
+	while (n--) {
+		while ((p < high) && Isspace(*p))
+			p++;
+
+		test = (*wtest)(*p);
+		while ((p < high) && (*wtest)(*p) == test)
+			p++;
+	}
+	p--;
+	return p;
+}
+
+/* ch_init():
+ *	Initialize the character editor
+ */
+protected int
+ch_init(EditLine *el)
+{
+	c_macro_t *ma = &el->el_chared.c_macro;
+
+	el->el_line.buffer		= el_malloc(EL_BUFSIZ *
+	    sizeof(*el->el_line.buffer));
+	if (el->el_line.buffer == NULL)
+		return -1;
+
+	(void) memset(el->el_line.buffer, 0, EL_BUFSIZ *
+	    sizeof(*el->el_line.buffer));
+	el->el_line.cursor		= el->el_line.buffer;
+	el->el_line.lastchar		= el->el_line.buffer;
+	el->el_line.limit		= &el->el_line.buffer[EL_BUFSIZ - EL_LEAVE];
+
+	el->el_chared.c_undo.buf	= el_malloc(EL_BUFSIZ *
+	    sizeof(*el->el_chared.c_undo.buf));
+	if (el->el_chared.c_undo.buf == NULL)
+		return -1;
+	(void) memset(el->el_chared.c_undo.buf, 0, EL_BUFSIZ *
+	    sizeof(*el->el_chared.c_undo.buf));
+	el->el_chared.c_undo.len	= -1;
+	el->el_chared.c_undo.cursor	= 0;
+	el->el_chared.c_redo.buf	= el_malloc(EL_BUFSIZ *
+	    sizeof(*el->el_chared.c_redo.buf));
+	if (el->el_chared.c_redo.buf == NULL)
+		return -1;
+	el->el_chared.c_redo.pos	= el->el_chared.c_redo.buf;
+	el->el_chared.c_redo.lim	= el->el_chared.c_redo.buf + EL_BUFSIZ;
+	el->el_chared.c_redo.cmd	= ED_UNASSIGNED;
+
+	el->el_chared.c_vcmd.action	= NOP;
+	el->el_chared.c_vcmd.pos	= el->el_line.buffer;
+
+	el->el_chared.c_kill.buf	= el_malloc(EL_BUFSIZ *
+	    sizeof(*el->el_chared.c_kill.buf));
+	if (el->el_chared.c_kill.buf == NULL)
+		return -1;
+	(void) memset(el->el_chared.c_kill.buf, 0, EL_BUFSIZ *
+	    sizeof(*el->el_chared.c_kill.buf));
+	el->el_chared.c_kill.mark	= el->el_line.buffer;
+	el->el_chared.c_kill.last	= el->el_chared.c_kill.buf;
+	el->el_chared.c_resizefun	= NULL;
+	el->el_chared.c_resizearg	= NULL;
+
+	el->el_map.current		= el->el_map.key;
+
+	el->el_state.inputmode		= MODE_INSERT; /* XXX: save a default */
+	el->el_state.doingarg		= 0;
+	el->el_state.metanext		= 0;
+	el->el_state.argument		= 1;
+	el->el_state.lastcmd		= ED_UNASSIGNED;
+
+	ma->level	= -1;
+	ma->offset	= 0;
+	ma->macro	= el_malloc(EL_MAXMACRO * sizeof(*ma->macro));
+	if (ma->macro == NULL)
+		return -1;
+	return 0;
+}
+
+/* ch_reset():
+ *	Reset the character editor
+ */
+protected void
+ch_reset(EditLine *el, int mclear)
+{
+	el->el_line.cursor		= el->el_line.buffer;
+	el->el_line.lastchar		= el->el_line.buffer;
+
+	el->el_chared.c_undo.len	= -1;
+	el->el_chared.c_undo.cursor	= 0;
+
+	el->el_chared.c_vcmd.action	= NOP;
+	el->el_chared.c_vcmd.pos	= el->el_line.buffer;
+
+	el->el_chared.c_kill.mark	= el->el_line.buffer;
+
+	el->el_map.current		= el->el_map.key;
+
+	el->el_state.inputmode		= MODE_INSERT; /* XXX: save a default */
+	el->el_state.doingarg		= 0;
+	el->el_state.metanext		= 0;
+	el->el_state.argument		= 1;
+	el->el_state.lastcmd		= ED_UNASSIGNED;
+
+	el->el_history.eventno		= 0;
+
+	if (mclear)
+		ch__clearmacro(el);
+}
+
+private void
+ch__clearmacro(EditLine *el)
+{
+	c_macro_t *ma = &el->el_chared.c_macro;
+	while (ma->level >= 0)
+		el_free(ma->macro[ma->level--]);
+}
+
+/* ch_enlargebufs():
+ *	Enlarge line buffer to be able to hold twice as much characters.
+ *	Returns 1 if successful, 0 if not.
+ */
+protected int
+ch_enlargebufs(EditLine *el, size_t addlen)
+{
+	size_t sz, newsz;
+	Char *newbuffer, *oldbuf, *oldkbuf;
+
+	sz = (size_t)(el->el_line.limit - el->el_line.buffer + EL_LEAVE);
+	newsz = sz * 2;
+	/*
+	 * If newly required length is longer than current buffer, we need
+	 * to make the buffer big enough to hold both old and new stuff.
+	 */
+	if (addlen > sz) {
+		while(newsz - sz < addlen)
+			newsz *= 2;
+	}
+
+	/*
+	 * Reallocate line buffer.
+	 */
+	newbuffer = el_realloc(el->el_line.buffer, newsz * sizeof(*newbuffer));
+	if (!newbuffer)
+		return 0;
+
+	/* zero the newly added memory, leave old data in */
+	(void) memset(&newbuffer[sz], 0, (newsz - sz) * sizeof(*newbuffer));
+	    
+	oldbuf = el->el_line.buffer;
+
+	el->el_line.buffer = newbuffer;
+	el->el_line.cursor = newbuffer + (el->el_line.cursor - oldbuf);
+	el->el_line.lastchar = newbuffer + (el->el_line.lastchar - oldbuf);
+	/* don't set new size until all buffers are enlarged */
+	el->el_line.limit  = &newbuffer[sz - EL_LEAVE];
+
+	/*
+	 * Reallocate kill buffer.
+	 */
+	newbuffer = el_realloc(el->el_chared.c_kill.buf, newsz *
+	    sizeof(*newbuffer));
+	if (!newbuffer)
+		return 0;
+
+	/* zero the newly added memory, leave old data in */
+	(void) memset(&newbuffer[sz], 0, (newsz - sz) * sizeof(*newbuffer));
+
+	oldkbuf = el->el_chared.c_kill.buf;
+
+	el->el_chared.c_kill.buf = newbuffer;
+	el->el_chared.c_kill.last = newbuffer +
+					(el->el_chared.c_kill.last - oldkbuf);
+	el->el_chared.c_kill.mark = el->el_line.buffer +
+					(el->el_chared.c_kill.mark - oldbuf);
+
+	/*
+	 * Reallocate undo buffer.
+	 */
+	newbuffer = el_realloc(el->el_chared.c_undo.buf,
+	    newsz * sizeof(*newbuffer));
+	if (!newbuffer)
+		return 0;
+
+	/* zero the newly added memory, leave old data in */
+	(void) memset(&newbuffer[sz], 0, (newsz - sz) * sizeof(*newbuffer));
+	el->el_chared.c_undo.buf = newbuffer;
+
+	newbuffer = el_realloc(el->el_chared.c_redo.buf,
+	    newsz * sizeof(*newbuffer));
+	if (!newbuffer)
+		return 0;
+	el->el_chared.c_redo.pos = newbuffer +
+			(el->el_chared.c_redo.pos - el->el_chared.c_redo.buf);
+	el->el_chared.c_redo.lim = newbuffer +
+			(el->el_chared.c_redo.lim - el->el_chared.c_redo.buf);
+	el->el_chared.c_redo.buf = newbuffer;
+	
+	if (!hist_enlargebuf(el, sz, newsz))
+		return 0;
+
+	/* Safe to set enlarged buffer size */
+	el->el_line.limit  = &el->el_line.buffer[newsz - EL_LEAVE];
+	if (el->el_chared.c_resizefun)
+		(*el->el_chared.c_resizefun)(el, el->el_chared.c_resizearg);
+	return 1;
+}
+
+/* ch_end():
+ *	Free the data structures used by the editor
+ */
+protected void
+ch_end(EditLine *el)
+{
+	el_free(el->el_line.buffer);
+	el->el_line.buffer = NULL;
+	el->el_line.limit = NULL;
+	el_free(el->el_chared.c_undo.buf);
+	el->el_chared.c_undo.buf = NULL;
+	el_free(el->el_chared.c_redo.buf);
+	el->el_chared.c_redo.buf = NULL;
+	el->el_chared.c_redo.pos = NULL;
+	el->el_chared.c_redo.lim = NULL;
+	el->el_chared.c_redo.cmd = ED_UNASSIGNED;
+	el_free(el->el_chared.c_kill.buf);
+	el->el_chared.c_kill.buf = NULL;
+	ch_reset(el, 1);
+	el_free(el->el_chared.c_macro.macro);
+	el->el_chared.c_macro.macro = NULL;
+}
+
+
+/* el_insertstr():
+ *	Insert string at cursorI
+ */
+public int
+FUN(el,insertstr)(EditLine *el, const Char *s)
+{
+	size_t len;
+
+	if (s == NULL || (len = Strlen(s)) == 0)
+		return -1;
+	if (el->el_line.lastchar + len >= el->el_line.limit) {
+		if (!ch_enlargebufs(el, len))
+			return -1;
+	}
+
+	c_insert(el, (int)len);
+	while (*s)
+		*el->el_line.cursor++ = *s++;
+	return 0;
+}
+
+
+/* el_deletestr():
+ *	Delete num characters before the cursor
+ */
+public void
+el_deletestr(EditLine *el, int n)
+{
+	if (n <= 0)
+		return;
+
+	if (el->el_line.cursor < &el->el_line.buffer[n])
+		return;
+
+	c_delbefore(el, n);		/* delete before dot */
+	el->el_line.cursor -= n;
+	if (el->el_line.cursor < el->el_line.buffer)
+		el->el_line.cursor = el->el_line.buffer;
+}
+
+/* el_cursor():
+ *	Move the cursor to the left or the right of the current position
+ */
+public int
+el_cursor(EditLine *el, int n)
+{
+	if (n == 0)
+		goto out;
+
+	el->el_line.cursor += n;
+
+	if (el->el_line.cursor < el->el_line.buffer)
+		el->el_line.cursor = el->el_line.buffer;
+	if (el->el_line.cursor > el->el_line.lastchar)
+		el->el_line.cursor = el->el_line.lastchar;
+out:
+	return el->el_line.cursor - el->el_line.buffer;
+}
+
+/* c_gets():
+ *	Get a string
+ */
+protected int
+c_gets(EditLine *el, Char *buf, const Char *prompt)
+{
+	Char ch;
+	ssize_t len;
+	Char *cp = el->el_line.buffer;
+
+	if (prompt) {
+		len = (ssize_t)Strlen(prompt);
+		(void)memcpy(cp, prompt, (size_t)len * sizeof(*cp));
+		cp += len;
+	}
+	len = 0;
+
+	for (;;) {
+		el->el_line.cursor = cp;
+		*cp = ' ';
+		el->el_line.lastchar = cp + 1;
+		re_refresh(el);
+
+		if (FUN(el,getc)(el, &ch) != 1) {
+			ed_end_of_file(el, 0);
+			len = -1;
+			break;
+		}
+
+		switch (ch) {
+
+		case 0010:	/* Delete and backspace */
+		case 0177:
+			if (len == 0) {
+				len = -1;
+				break;
+			}
+			cp--;
+			continue;
+
+		case 0033:	/* ESC */
+		case '\r':	/* Newline */
+		case '\n':
+			buf[len] = ch;
+			break;
+
+		default:
+			if (len >= (ssize_t)(EL_BUFSIZ - 16))
+				terminal_beep(el);
+			else {
+				buf[len++] = ch;
+				*cp++ = ch;
+			}
+			continue;
+		}
+		break;
+	}
+
+	el->el_line.buffer[0] = '\0';
+	el->el_line.lastchar = el->el_line.buffer;
+	el->el_line.cursor = el->el_line.buffer;
+	return (int)len;
+}
+
+
+/* c_hpos():
+ *	Return the current horizontal position of the cursor
+ */
+protected int
+c_hpos(EditLine *el)
+{
+	Char *ptr;
+
+	/*
+	 * Find how many characters till the beginning of this line.
+	 */
+	if (el->el_line.cursor == el->el_line.buffer)
+		return 0;
+	else {
+		for (ptr = el->el_line.cursor - 1;
+		     ptr >= el->el_line.buffer && *ptr != '\n';
+		     ptr--)
+			continue;
+		return (int)(el->el_line.cursor - ptr - 1);
+	}
+}
+
+protected int
+ch_resizefun(EditLine *el, el_zfunc_t f, void *a)
+{
+	el->el_chared.c_resizefun = f;
+	el->el_chared.c_resizearg = a;
+	return 0;
+}
diff --git a/src/chared.h b/src/chared.h
new file mode 100644
index 0000000..176475a
--- /dev/null
+++ b/src/chared.h
@@ -0,0 +1,171 @@
+/*	$NetBSD: chared.h,v 1.21 2010/08/28 15:44:59 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)chared.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.chared.h: Character editor interface
+ */
+#ifndef _h_el_chared
+#define	_h_el_chared
+
+#include <ctype.h>
+#include <string.h>
+
+#include "histedit.h"
+
+#define	EL_MAXMACRO	10
+
+/*
+ * This is an issue of basic "vi" look-and-feel. Defining VI_MOVE works
+ * like real vi: i.e. the transition from command<->insert modes moves
+ * the cursor.
+ *
+ * On the other hand we really don't want to move the cursor, because
+ * all the editing commands don't include the character under the cursor.
+ * Probably the best fix is to make all the editing commands aware of
+ * this fact.
+ */
+#define	VI_MOVE
+
+
+typedef struct c_macro_t {
+	int	  level;
+	int	  offset;
+	Char	**macro;
+} c_macro_t;
+
+/*
+ * Undo information for vi - no undo in emacs (yet)
+ */
+typedef struct c_undo_t {
+	ssize_t	 len;			/* length of saved line */
+	int	 cursor;		/* position of saved cursor */
+	Char	*buf;			/* full saved text */
+} c_undo_t;
+
+/* redo for vi */
+typedef struct c_redo_t {
+	Char	*buf;			/* redo insert key sequence */
+	Char	*pos;
+	Char	*lim;
+	el_action_t	cmd;		/* command to redo */
+	Char	ch;			/* char that invoked it */
+	int	count;
+	int	action;			/* from cv_action() */
+} c_redo_t;
+
+/*
+ * Current action information for vi
+ */
+typedef struct c_vcmd_t {
+	int	 action;
+	Char	*pos;
+} c_vcmd_t;
+
+/*
+ * Kill buffer for emacs
+ */
+typedef struct c_kill_t {
+	Char	*buf;
+	Char	*last;
+	Char	*mark;
+} c_kill_t;
+
+typedef void (*el_zfunc_t)(EditLine *, void *);
+
+/*
+ * Note that we use both data structures because the user can bind
+ * commands from both editors!
+ */
+typedef struct el_chared_t {
+	c_undo_t	c_undo;
+	c_kill_t	c_kill;
+	c_redo_t	c_redo;
+	c_vcmd_t	c_vcmd;
+	c_macro_t	c_macro;
+	el_zfunc_t	c_resizefun;
+	void *		c_resizearg;
+} el_chared_t;
+
+
+#define	STRQQ		"\"\""
+
+#define	isglob(a)	(strchr("*[]?", (a)) != NULL)
+
+#define	NOP		0x00
+#define	DELETE		0x01
+#define	INSERT		0x02
+#define	YANK		0x04
+
+#define	CHAR_FWD	(+1)
+#define	CHAR_BACK	(-1)
+
+#define	MODE_INSERT	0
+#define	MODE_REPLACE	1
+#define	MODE_REPLACE_1	2
+
+#include "common.h"
+#include "vi.h"
+#include "emacs.h"
+#include "search.h"
+#include "fcns.h"
+
+
+protected int	 cv__isword(Int);
+protected int	 cv__isWord(Int);
+protected void	 cv_delfini(EditLine *);
+protected Char	*cv__endword(Char *, Char *, int, int (*)(Int));
+protected int	 ce__isword(Int);
+protected void	 cv_undo(EditLine *);
+protected void	 cv_yank(EditLine *, const Char *, int);
+protected Char	*cv_next_word(EditLine*, Char *, Char *, int, int (*)(Int));
+protected Char	*cv_prev_word(Char *, Char *, int, int (*)(Int));
+protected Char	*c__next_word(Char *, Char *, int, int (*)(Int));
+protected Char	*c__prev_word(Char *, Char *, int, int (*)(Int));
+protected void	 c_insert(EditLine *, int);
+protected void	 c_delbefore(EditLine *, int);
+protected void	 c_delbefore1(EditLine *);
+protected void	 c_delafter(EditLine *, int);
+protected void	 c_delafter1(EditLine *);
+protected int	 c_gets(EditLine *, Char *, const Char *);
+protected int	 c_hpos(EditLine *);
+
+protected int	 ch_init(EditLine *);
+protected void	 ch_reset(EditLine *, int);
+protected int	 ch_resizefun(EditLine *, el_zfunc_t, void *);
+protected int	 ch_enlargebufs(EditLine *, size_t);
+protected void	 ch_end(EditLine *);
+
+#endif /* _h_el_chared */
diff --git a/src/chartype.c b/src/chartype.c
new file mode 100644
index 0000000..8766aac
--- /dev/null
+++ b/src/chartype.c
@@ -0,0 +1,356 @@
+/*	$NetBSD: chartype.c,v 1.10 2011/08/16 16:25:15 christos Exp $	*/
+
+/*-
+ * Copyright (c) 2009 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *        This product includes software developed by the NetBSD
+ *        Foundation, Inc. and its contributors.
+ * 4. Neither the name of The NetBSD Foundation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * chartype.c: character classification and meta information
+ */
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+__RCSID("$NetBSD: chartype.c,v 1.10 2011/08/16 16:25:15 christos Exp $");
+#endif /* not lint && not SCCSID */
+#include "el.h"
+#include <stdlib.h>
+
+#define CT_BUFSIZ ((size_t)1024)
+
+#ifdef WIDECHAR
+protected void
+ct_conv_buff_resize(ct_buffer_t *conv, size_t mincsize, size_t minwsize)
+{
+	void *p;
+	if (mincsize > conv->csize) {
+		conv->csize = mincsize;
+		p = el_realloc(conv->cbuff, conv->csize * sizeof(*conv->cbuff));
+		if (p == NULL) {
+			conv->csize = 0;
+			el_free(conv->cbuff);
+			conv->cbuff = NULL;
+		} else 
+			conv->cbuff = p;
+	}
+
+	if (minwsize > conv->wsize) {
+		conv->wsize = minwsize;
+		p = el_realloc(conv->wbuff, conv->wsize * sizeof(*conv->wbuff));
+		if (p == NULL) {
+			conv->wsize = 0;
+			el_free(conv->wbuff);
+			conv->wbuff = NULL;
+		} else
+			conv->wbuff = p;
+	}
+}
+
+
+public char *
+ct_encode_string(const Char *s, ct_buffer_t *conv)
+{
+	char *dst;
+	ssize_t used = 0;
+
+	if (!s)
+		return NULL;
+	if (!conv->cbuff)
+		ct_conv_buff_resize(conv, CT_BUFSIZ, (size_t)0);
+	if (!conv->cbuff)
+		return NULL;
+
+	dst = conv->cbuff;
+	while (*s) {
+		used = (ssize_t)(conv->csize - (size_t)(dst - conv->cbuff));
+		if (used < 5) {
+			used = dst - conv->cbuff;
+			ct_conv_buff_resize(conv, conv->csize + CT_BUFSIZ,
+			    (size_t)0);
+			if (!conv->cbuff)
+				return NULL;
+			dst = conv->cbuff + used;
+		}
+		used = ct_encode_char(dst, (size_t)5, *s);
+		if (used == -1) /* failed to encode, need more buffer space */
+			abort();
+		++s;
+		dst += used;
+	}
+	*dst = '\0';
+	return conv->cbuff;
+}
+
+public Char *
+ct_decode_string(const char *s, ct_buffer_t *conv)
+{
+	size_t len = 0;
+
+	if (!s)
+		return NULL;
+	if (!conv->wbuff)
+		ct_conv_buff_resize(conv, (size_t)0, CT_BUFSIZ);
+	if (!conv->wbuff)
+		return NULL;
+
+	len = ct_mbstowcs(NULL, s, (size_t)0);
+	if (len == (size_t)-1)
+		return NULL;
+	if (len > conv->wsize)
+		ct_conv_buff_resize(conv, (size_t)0, len + 1);
+	if (!conv->wbuff)
+		return NULL;
+	ct_mbstowcs(conv->wbuff, s, conv->wsize);
+	return conv->wbuff;
+}
+
+
+protected Char **
+ct_decode_argv(int argc, const char *argv[], ct_buffer_t *conv)
+{
+	size_t bufspace;
+	int i;
+	Char *p;
+	Char **wargv;
+	ssize_t bytes;
+
+	/* Make sure we have enough space in the conversion buffer to store all
+	 * the argv strings. */
+	for (i = 0, bufspace = 0; i < argc; ++i)
+		bufspace += argv[i] ? strlen(argv[i]) + 1 : 0;
+	ct_conv_buff_resize(conv, (size_t)0, bufspace);
+	if (!conv->wsize)
+		return NULL;
+
+	wargv = el_malloc((size_t)argc * sizeof(*wargv));
+
+	for (i = 0, p = conv->wbuff; i < argc; ++i) {
+		if (!argv[i]) {   /* don't pass null pointers to mbstowcs */
+			wargv[i] = NULL;
+			continue;
+		} else {
+			wargv[i] = p;
+			bytes = (ssize_t)mbstowcs(p, argv[i], bufspace);
+		}
+		if (bytes == -1) {
+			el_free(wargv);
+			return NULL;
+		} else
+			bytes++;  /* include '\0' in the count */
+		bufspace -= (size_t)bytes;
+		p += bytes;
+	}
+
+	return wargv;
+}
+
+
+protected size_t
+ct_enc_width(Char c)
+{
+	/* UTF-8 encoding specific values */
+	if (c < 0x80)
+		return 1;
+	else if (c < 0x0800)
+		return 2;
+	else if (c < 0x10000)
+		return 3;
+	else if (c < 0x110000)
+		return 4;
+	else
+		return 0; /* not a valid codepoint */
+}
+
+protected ssize_t
+ct_encode_char(char *dst, size_t len, Char c)
+{
+	ssize_t l = 0;
+	if (len < ct_enc_width(c))
+		return -1;
+	l = ct_wctomb(dst, c);
+
+	if (l < 0) {
+		ct_wctomb_reset;
+		l = 0;
+	}
+	return l;
+}
+#endif
+
+protected const Char *
+ct_visual_string(const Char *s)
+{
+	static Char *buff = NULL;
+	static size_t buffsize = 0;
+	void *p;
+	Char *dst;
+	ssize_t used = 0;
+
+	if (!s)
+		return NULL;
+	if (!buff) {
+	    buffsize = CT_BUFSIZ;
+	    buff = el_malloc(buffsize * sizeof(*buff));
+	}
+	dst = buff;
+	while (*s) {
+		used = ct_visual_char(dst, buffsize - (size_t)(dst - buff), *s);
+		if (used == -1) { /* failed to encode, need more buffer space */
+			used = dst - buff;
+			buffsize += CT_BUFSIZ;
+			p = el_realloc(buff, buffsize * sizeof(*buff));
+			if (p == NULL)
+				goto out;
+			buff = p;
+			dst = buff + used;
+			/* don't increment s here - we want to retry it! */
+		}
+		else
+		    ++s;
+		dst += used;
+	}
+	if (dst >= (buff + buffsize)) { /* sigh */
+		buffsize += 1;
+		p = el_realloc(buff, buffsize * sizeof(*buff));
+		if (p == NULL)
+			goto out;
+		buff = p;
+		dst = buff + buffsize - 1;
+	}
+	*dst = 0;
+	return buff;
+out:
+	el_free(buff);
+	buffsize = 0;
+	return NULL;
+}
+
+
+
+protected int
+ct_visual_width(Char c)
+{
+	int t = ct_chr_class(c);
+	switch (t) {
+	case CHTYPE_ASCIICTL:
+		return 2; /* ^@ ^? etc. */
+	case CHTYPE_TAB:
+		return 1; /* Hmm, this really need to be handled outside! */
+	case CHTYPE_NL:
+		return 0; /* Should this be 1 instead? */
+#ifdef WIDECHAR
+	case CHTYPE_PRINT:
+		return wcwidth(c);
+	case CHTYPE_NONPRINT:
+		if (c > 0xffff) /* prefer standard 4-byte display over 5-byte */
+			return 8; /* \U+12345 */
+		else
+			return 7; /* \U+1234 */
+#else
+	case CHTYPE_PRINT:
+		return 1;
+	case CHTYPE_NONPRINT:
+		return 4; /* \123 */
+#endif
+	default:
+		return 0; /* should not happen */
+	}
+}
+
+
+protected ssize_t
+ct_visual_char(Char *dst, size_t len, Char c)
+{
+	int t = ct_chr_class(c);
+	switch (t) {
+	case CHTYPE_TAB:
+	case CHTYPE_NL:
+	case CHTYPE_ASCIICTL:
+		if (len < 2)
+			return -1;   /* insufficient space */
+		*dst++ = '^';
+		if (c == '\177')
+			*dst = '?'; /* DEL -> ^? */
+		else
+			*dst = c | 0100;    /* uncontrolify it */
+		return 2;
+	case CHTYPE_PRINT:
+		if (len < 1)
+			return -1;  /* insufficient space */
+		*dst = c;
+		return 1;
+	case CHTYPE_NONPRINT:
+		/* we only use single-width glyphs for display,
+		 * so this is right */
+		if ((ssize_t)len < ct_visual_width(c))
+			return -1;   /* insufficient space */
+#ifdef WIDECHAR
+		*dst++ = '\\';
+		*dst++ = 'U';
+		*dst++ = '+';
+#define tohexdigit(v) "0123456789ABCDEF"[v]
+		if (c > 0xffff) /* prefer standard 4-byte display over 5-byte */
+			*dst++ = tohexdigit(((unsigned int) c >> 16) & 0xf);
+		*dst++ = tohexdigit(((unsigned int) c >> 12) & 0xf);
+		*dst++ = tohexdigit(((unsigned int) c >>  8) & 0xf);
+		*dst++ = tohexdigit(((unsigned int) c >>  4) & 0xf);
+		*dst   = tohexdigit(((unsigned int) c      ) & 0xf);
+		return c > 0xffff ? 8 : 7;
+#else
+		*dst++ = '\\';
+#define tooctaldigit(v) ((v) + '0')
+		*dst++ = tooctaldigit(((unsigned int) c >> 6) & 0x7);
+		*dst++ = tooctaldigit(((unsigned int) c >> 3) & 0x7);
+		*dst++ = tooctaldigit(((unsigned int) c     ) & 0x7);
+#endif
+		/*FALLTHROUGH*/
+	/* these two should be handled outside this function */
+	default:            /* we should never hit the default */
+		return 0;
+	}
+}
+
+
+
+
+protected int
+ct_chr_class(Char c)
+{
+	if (c == '\t')
+		return CHTYPE_TAB;
+	else if (c == '\n')
+		return CHTYPE_NL;
+	else if (IsASCII(c) && Iscntrl(c))
+		return CHTYPE_ASCIICTL;
+	else if (Isprint(c))
+		return CHTYPE_PRINT;
+	else
+		return CHTYPE_NONPRINT;
+}
diff --git a/src/chartype.h b/src/chartype.h
new file mode 100644
index 0000000..12fa9ac
--- /dev/null
+++ b/src/chartype.h
@@ -0,0 +1,254 @@
+/*	$NetBSD: chartype.h,v 1.10 2011/11/16 01:45:10 christos Exp $	*/
+
+/*-
+ * Copyright (c) 2009 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *        This product includes software developed by the NetBSD
+ *        Foundation, Inc. and its contributors.
+ * 4. Neither the name of The NetBSD Foundation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _h_chartype_f
+#define _h_chartype_f
+
+
+
+#ifdef WIDECHAR
+
+/* Ideally we should also test the value of the define to see if it
+ * supports non-BMP code points without requiring UTF-16, but nothing
+ * seems to actually advertise this properly, despite Unicode 3.1 having
+ * been around since 2001... */
+#if !defined(__NetBSD__) && !defined(__sun) && !(defined(__APPLE__) && defined(__MACH__))
+#ifndef __STDC_ISO_10646__
+/* In many places it is assumed that the first 127 code points are ASCII
+ * compatible, so ensure wchar_t indeed does ISO 10646 and not some other
+ * funky encoding that could break us in weird and wonderful ways. */
+	#error wchar_t must store ISO 10646 characters
+#endif
+#endif
+
+/* Oh for a <uchar.h> with char32_t and __STDC_UTF_32__ in it...
+ * ref: ISO/IEC DTR 19769
+ */
+#if WCHAR_MAX < INT32_MAX
+#warning Build environment does not support non-BMP characters
+#endif
+
+#ifndef HAVE_WCSDUP
+wchar_t *wcsdup(const wchar_t *s);
+#endif
+
+#define ct_mbtowc            mbtowc
+#define ct_mbtowc_reset      mbtowc(0,0,(size_t)0)
+#define ct_wctomb            wctomb
+#define ct_wctomb_reset      wctomb(0,0)
+#define ct_wcstombs          wcstombs
+#define ct_mbstowcs          mbstowcs
+
+#define Char			wchar_t
+#define Int			wint_t
+#define FUN(prefix,rest)	prefix ## _w ## rest
+#define FUNW(type)		type ## _w
+#define TYPE(type)		type ## W
+#define FSTR			"%ls"
+#define STR(x) 			L ## x
+#define UC(c)			c
+#define Isalpha(x)  iswalpha(x)
+#define Isalnum(x)  iswalnum(x)
+#define Isgraph(x)  iswgraph(x)
+#define Isspace(x)  iswspace(x)
+#define Isdigit(x)  iswdigit(x)
+#define Iscntrl(x)  iswcntrl(x)
+#define Isprint(x)  iswprint(x)
+
+#define Isupper(x)  iswupper(x)
+#define Islower(x)  iswlower(x)
+#define Toupper(x)  towupper(x)
+#define Tolower(x)  towlower(x)
+
+#define IsASCII(x)  (x < 0x100)
+
+#define Strlen(x)       wcslen(x)
+#define Strchr(s,c)     wcschr(s,c)
+#define Strrchr(s,c)    wcsrchr(s,c)
+#define Strstr(s,v)     wcsstr(s,v)
+#define Strdup(x)       wcsdup(x)
+#define Strcpy(d,s)     wcscpy(d,s)
+#define Strncpy(d,s,n)  wcsncpy(d,s,n)
+#define Strncat(d,s,n)  wcsncat(d,s,n)
+
+#define Strcmp(s,v)     wcscmp(s,v)
+#define Strncmp(s,v,n)  wcsncmp(s,v,n)
+#define Strcspn(s,r)    wcscspn(s,r)
+
+#define Strtol(p,e,b)   wcstol(p,e,b)
+
+static inline int
+Width(wchar_t c)
+{
+	int w = wcwidth(c);
+	return w < 0 ? 0 : w;
+}
+
+#else /* NARROW */
+
+#define ct_mbtowc            error
+#define ct_mbtowc_reset      
+#define ct_wctomb            error
+#define ct_wctomb_reset      
+#define ct_wcstombs(a, b, c)    (strncpy(a, b, c), strlen(a))
+#define ct_mbstowcs(a, b, c)    (strncpy(a, b, c), strlen(a))
+
+#define Char			char
+#define Int			int
+#define FUN(prefix,rest)	prefix ## _ ## rest
+#define FUNW(type)		type
+#define TYPE(type)		type
+#define FSTR			"%s"
+#define STR(x) 			x
+#define UC(c)			(unsigned char)(c)
+
+#define Isalpha(x)  isalpha((unsigned char)x)
+#define Isalnum(x)  isalnum((unsigned char)x)
+#define Isgraph(x)  isgraph((unsigned char)x)
+#define Isspace(x)  isspace((unsigned char)x)
+#define Isdigit(x)  isdigit((unsigned char)x)
+#define Iscntrl(x)  iscntrl((unsigned char)x)
+#define Isprint(x)  isprint((unsigned char)x)
+
+#define Isupper(x)  isupper((unsigned char)x)
+#define Islower(x)  islower((unsigned char)x)
+#define Toupper(x)  toupper((unsigned char)x)
+#define Tolower(x)  tolower((unsigned char)x)
+
+#define IsASCII(x)  isascii((unsigned char)x)
+
+#define Strlen(x)       strlen(x)
+#define Strchr(s,c)     strchr(s,c)
+#define Strrchr(s,c)    strrchr(s,c)
+#define Strstr(s,v)     strstr(s,v)
+#define Strdup(x)       strdup(x)
+#define Strcpy(d,s)     strcpy(d,s)
+#define Strncpy(d,s,n)  strncpy(d,s,n)
+#define Strncat(d,s,n)  strncat(d,s,n)
+
+#define Strcmp(s,v)     strcmp(s,v)
+#define Strncmp(s,v,n)  strncmp(s,v,n)
+#define Strcspn(s,r)    strcspn(s,r)
+
+#define Strtol(p,e,b)   strtol(p,e,b)
+
+#define Width(c)	1
+
+#endif
+
+
+#ifdef WIDECHAR
+/*
+ * Conversion buffer
+ */
+typedef struct ct_buffer_t {
+        char    *cbuff;
+        size_t  csize;
+        Char *wbuff;
+        size_t  wsize;
+} ct_buffer_t;
+
+#define ct_encode_string __ct_encode_string
+/* Encode a wide-character string and return the UTF-8 encoded result. */
+public char *ct_encode_string(const Char *, ct_buffer_t *);
+
+#define ct_decode_string __ct_decode_string
+/* Decode a (multi)?byte string and return the wide-character string result. */
+public Char *ct_decode_string(const char *, ct_buffer_t *);
+
+/* Decode a (multi)?byte argv string array.
+ * The pointer returned must be free()d when done. */
+protected Char **ct_decode_argv(int, const char *[],  ct_buffer_t *);
+
+/* Resizes the conversion buffer(s) if needed. */
+protected void ct_conv_buff_resize(ct_buffer_t *, size_t, size_t);
+protected ssize_t ct_encode_char(char *, size_t, Char);
+protected size_t ct_enc_width(Char);
+
+#define ct_free_argv(s)	el_free(s)
+
+#else
+#define	ct_encode_string(s, b)	(s)
+#define ct_decode_string(s, b)	(s)
+#define ct_decode_argv(l, s, b)	(s)
+#define ct_conv_buff_resize(b, os, ns)
+#define ct_encode_char(d, l, s)	(*d = s, 1)
+#define ct_free_argv(s)
+#endif
+
+#ifndef NARROWCHAR
+/* Encode a characted into the destination buffer, provided there is sufficent
+ * buffer space available. Returns the number of bytes used up (zero if the
+ * character cannot be encoded, -1 if there was not enough space available). */
+
+/* The maximum buffer size to hold the most unwieldly visual representation,
+ * in this case \U+nnnnn. */
+#define VISUAL_WIDTH_MAX ((size_t)8)
+
+/* The terminal is thought of in terms of X columns by Y lines. In the cases
+ * where a wide character takes up more than one column, the adjacent 
+ * occupied column entries will contain this faux character. */
+#define MB_FILL_CHAR ((Char)-1)
+
+/* Visual width of character c, taking into account ^? , \0177 and \U+nnnnn
+ * style visual expansions. */
+protected int ct_visual_width(Char);
+
+/* Turn the given character into the appropriate visual format, matching
+ * the width given by ct_visual_width(). Returns the number of characters used
+ * up, or -1 if insufficient space. Buffer length is in count of Char's. */
+protected ssize_t ct_visual_char(Char *, size_t, Char);
+
+/* Convert the given string into visual format, using the ct_visual_char()
+ * function. Uses a static buffer, so not threadsafe. */
+protected const Char *ct_visual_string(const Char *);
+
+
+/* printable character, use ct_visual_width() to find out display width */
+#define CHTYPE_PRINT        ( 0)
+/* control character found inside the ASCII portion of the charset */
+#define CHTYPE_ASCIICTL     (-1)
+/* a \t */
+#define CHTYPE_TAB          (-2)
+/* a \n */
+#define CHTYPE_NL           (-3)
+/* non-printable character */
+#define CHTYPE_NONPRINT     (-4)
+/* classification of character c, as one of the above defines */
+protected int ct_chr_class(Char c);
+#endif
+
+
+#endif /* _chartype_f */
diff --git a/src/common.c b/src/common.c
new file mode 100644
index 0000000..1726b0f
--- /dev/null
+++ b/src/common.c
@@ -0,0 +1,919 @@
+/*	$NetBSD: common.c,v 1.29 2012/03/24 20:08:43 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)common.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: common.c,v 1.29 2012/03/24 20:08:43 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * common.c: Common Editor functions
+ */
+#include "el.h"
+
+/* ed_end_of_file():
+ *	Indicate end of file
+ *	[^D]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_end_of_file(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	re_goto_bottom(el);
+	*el->el_line.lastchar = '\0';
+	return CC_EOF;
+}
+
+
+/* ed_insert():
+ *	Add character to the line
+ *	Insert a character [bound to all insert keys]
+ */
+protected el_action_t
+ed_insert(EditLine *el, Int c)
+{
+	int count = el->el_state.argument;
+
+	if (c == '\0')
+		return CC_ERROR;
+
+	if (el->el_line.lastchar + el->el_state.argument >=
+	    el->el_line.limit) {
+		/* end of buffer space, try to allocate more */
+		if (!ch_enlargebufs(el, (size_t) count))
+			return CC_ERROR;	/* error allocating more */
+	}
+
+	if (count == 1) {
+		if (el->el_state.inputmode == MODE_INSERT
+		    || el->el_line.cursor >= el->el_line.lastchar)
+			c_insert(el, 1);
+
+		*el->el_line.cursor++ = c;
+		re_fastaddc(el);		/* fast refresh for one char. */
+	} else {
+		if (el->el_state.inputmode != MODE_REPLACE_1)
+			c_insert(el, el->el_state.argument);
+
+		while (count-- && el->el_line.cursor < el->el_line.lastchar)
+			*el->el_line.cursor++ = c;
+		re_refresh(el);
+	}
+
+	if (el->el_state.inputmode == MODE_REPLACE_1)
+		return vi_command_mode(el, 0);
+
+	return CC_NORM;
+}
+
+
+/* ed_delete_prev_word():
+ *	Delete from beginning of current word to cursor
+ *	[M-^?] [^W]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_delete_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *cp, *p, *kp;
+
+	if (el->el_line.cursor == el->el_line.buffer)
+		return CC_ERROR;
+
+	cp = c__prev_word(el->el_line.cursor, el->el_line.buffer,
+	    el->el_state.argument, ce__isword);
+
+	for (p = cp, kp = el->el_chared.c_kill.buf; p < el->el_line.cursor; p++)
+		*kp++ = *p;
+	el->el_chared.c_kill.last = kp;
+
+	c_delbefore(el, (int)(el->el_line.cursor - cp));/* delete before dot */
+	el->el_line.cursor = cp;
+	if (el->el_line.cursor < el->el_line.buffer)
+		el->el_line.cursor = el->el_line.buffer; /* bounds check */
+	return CC_REFRESH;
+}
+
+
+/* ed_delete_next_char():
+ *	Delete character under cursor
+ *	[^D] [x]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_delete_next_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+#ifdef DEBUG_EDIT
+#define	EL	el->el_line
+	(void) fprintf(el->el_errlfile,
+	    "\nD(b: %x(%s)  c: %x(%s) last: %x(%s) limit: %x(%s)\n",
+	    EL.buffer, EL.buffer, EL.cursor, EL.cursor, EL.lastchar,
+	    EL.lastchar, EL.limit, EL.limit);
+#endif
+	if (el->el_line.cursor == el->el_line.lastchar) {
+			/* if I'm at the end */
+		if (el->el_map.type == MAP_VI) {
+			if (el->el_line.cursor == el->el_line.buffer) {
+				/* if I'm also at the beginning */
+#ifdef KSHVI
+				return CC_ERROR;
+#else
+				/* then do an EOF */
+				terminal_writec(el, c);
+				return CC_EOF;
+#endif
+			} else {
+#ifdef KSHVI
+				el->el_line.cursor--;
+#else
+				return CC_ERROR;
+#endif
+			}
+		} else
+				return CC_ERROR;
+	}
+	c_delafter(el, el->el_state.argument);	/* delete after dot */
+	if (el->el_map.type == MAP_VI &&
+	    el->el_line.cursor >= el->el_line.lastchar &&
+	    el->el_line.cursor > el->el_line.buffer)
+			/* bounds check */
+		el->el_line.cursor = el->el_line.lastchar - 1;
+	return CC_REFRESH;
+}
+
+
+/* ed_kill_line():
+ *	Cut to the end of line
+ *	[^K] [^K]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_kill_line(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *kp, *cp;
+
+	cp = el->el_line.cursor;
+	kp = el->el_chared.c_kill.buf;
+	while (cp < el->el_line.lastchar)
+		*kp++ = *cp++;	/* copy it */
+	el->el_chared.c_kill.last = kp;
+			/* zap! -- delete to end */
+	el->el_line.lastchar = el->el_line.cursor;
+	return CC_REFRESH;
+}
+
+
+/* ed_move_to_end():
+ *	Move cursor to the end of line
+ *	[^E] [^E]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_move_to_end(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_line.cursor = el->el_line.lastchar;
+	if (el->el_map.type == MAP_VI) {
+		if (el->el_chared.c_vcmd.action != NOP) {
+			cv_delfini(el);
+			return CC_REFRESH;
+		}
+#ifdef VI_MOVE
+		el->el_line.cursor--;
+#endif
+	}
+	return CC_CURSOR;
+}
+
+
+/* ed_move_to_beg():
+ *	Move cursor to the beginning of line
+ *	[^A] [^A]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_move_to_beg(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_line.cursor = el->el_line.buffer;
+
+	if (el->el_map.type == MAP_VI) {
+			/* We want FIRST non space character */
+		while (Isspace(*el->el_line.cursor))
+			el->el_line.cursor++;
+		if (el->el_chared.c_vcmd.action != NOP) {
+			cv_delfini(el);
+			return CC_REFRESH;
+		}
+	}
+	return CC_CURSOR;
+}
+
+
+/* ed_transpose_chars():
+ *	Exchange the character to the left of the cursor with the one under it
+ *	[^T] [^T]
+ */
+protected el_action_t
+ed_transpose_chars(EditLine *el, Int c)
+{
+
+	if (el->el_line.cursor < el->el_line.lastchar) {
+		if (el->el_line.lastchar <= &el->el_line.buffer[1])
+			return CC_ERROR;
+		else
+			el->el_line.cursor++;
+	}
+	if (el->el_line.cursor > &el->el_line.buffer[1]) {
+		/* must have at least two chars entered */
+		c = el->el_line.cursor[-2];
+		el->el_line.cursor[-2] = el->el_line.cursor[-1];
+		el->el_line.cursor[-1] = c;
+		return CC_REFRESH;
+	} else
+		return CC_ERROR;
+}
+
+
+/* ed_next_char():
+ *	Move to the right one character
+ *	[^F] [^F]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_next_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *lim = el->el_line.lastchar;
+
+	if (el->el_line.cursor >= lim ||
+	    (el->el_line.cursor == lim - 1 &&
+	    el->el_map.type == MAP_VI &&
+	    el->el_chared.c_vcmd.action == NOP))
+		return CC_ERROR;
+
+	el->el_line.cursor += el->el_state.argument;
+	if (el->el_line.cursor > lim)
+		el->el_line.cursor = lim;
+
+	if (el->el_map.type == MAP_VI)
+		if (el->el_chared.c_vcmd.action != NOP) {
+			cv_delfini(el);
+			return CC_REFRESH;
+		}
+	return CC_CURSOR;
+}
+
+
+/* ed_prev_word():
+ *	Move to the beginning of the current word
+ *	[M-b] [b]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor == el->el_line.buffer)
+		return CC_ERROR;
+
+	el->el_line.cursor = c__prev_word(el->el_line.cursor,
+	    el->el_line.buffer,
+	    el->el_state.argument,
+	    ce__isword);
+
+	if (el->el_map.type == MAP_VI)
+		if (el->el_chared.c_vcmd.action != NOP) {
+			cv_delfini(el);
+			return CC_REFRESH;
+		}
+	return CC_CURSOR;
+}
+
+
+/* ed_prev_char():
+ *	Move to the left one character
+ *	[^B] [^B]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor > el->el_line.buffer) {
+		el->el_line.cursor -= el->el_state.argument;
+		if (el->el_line.cursor < el->el_line.buffer)
+			el->el_line.cursor = el->el_line.buffer;
+
+		if (el->el_map.type == MAP_VI)
+			if (el->el_chared.c_vcmd.action != NOP) {
+				cv_delfini(el);
+				return CC_REFRESH;
+			}
+		return CC_CURSOR;
+	} else
+		return CC_ERROR;
+}
+
+
+/* ed_quoted_insert():
+ *	Add the next character typed verbatim
+ *	[^V] [^V]
+ */
+protected el_action_t
+ed_quoted_insert(EditLine *el, Int c)
+{
+	int num;
+	Char tc;
+
+	tty_quotemode(el);
+	num = FUN(el,getc)(el, &tc);
+	c = tc;
+	tty_noquotemode(el);
+	if (num == 1)
+		return ed_insert(el, c);
+	else
+		return ed_end_of_file(el, 0);
+}
+
+
+/* ed_digit():
+ *	Adds to argument or enters a digit
+ */
+protected el_action_t
+ed_digit(EditLine *el, Int c)
+{
+
+	if (!Isdigit(c))
+		return CC_ERROR;
+
+	if (el->el_state.doingarg) {
+			/* if doing an arg, add this in... */
+		if (el->el_state.lastcmd == EM_UNIVERSAL_ARGUMENT)
+			el->el_state.argument = c - '0';
+		else {
+			if (el->el_state.argument > 1000000)
+				return CC_ERROR;
+			el->el_state.argument =
+			    (el->el_state.argument * 10) + (c - '0');
+		}
+		return CC_ARGHACK;
+	}
+
+	return ed_insert(el, c);
+}
+
+
+/* ed_argument_digit():
+ *	Digit that starts argument
+ *	For ESC-n
+ */
+protected el_action_t
+ed_argument_digit(EditLine *el, Int c)
+{
+
+	if (!Isdigit(c))
+		return CC_ERROR;
+
+	if (el->el_state.doingarg) {
+		if (el->el_state.argument > 1000000)
+			return CC_ERROR;
+		el->el_state.argument = (el->el_state.argument * 10) +
+		    (c - '0');
+	} else {		/* else starting an argument */
+		el->el_state.argument = c - '0';
+		el->el_state.doingarg = 1;
+	}
+	return CC_ARGHACK;
+}
+
+
+/* ed_unassigned():
+ *	Indicates unbound character
+ *	Bound to keys that are not assigned
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_unassigned(EditLine *el __attribute__((__unused__)),
+    Int c __attribute__((__unused__)))
+{
+
+	return CC_ERROR;
+}
+
+
+/**
+ ** TTY key handling.
+ **/
+
+/* ed_tty_sigint():
+ *	Tty interrupt character
+ *	[^C]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_tty_sigint(EditLine *el __attribute__((__unused__)), 
+	      Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_tty_dsusp():
+ *	Tty delayed suspend character
+ *	[^Y]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_tty_dsusp(EditLine *el __attribute__((__unused__)), 
+	     Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_tty_flush_output():
+ *	Tty flush output characters
+ *	[^O]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_tty_flush_output(EditLine *el __attribute__((__unused__)), 
+		    Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_tty_sigquit():
+ *	Tty quit character
+ *	[^\]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_tty_sigquit(EditLine *el __attribute__((__unused__)), 
+	       Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_tty_sigtstp():
+ *	Tty suspend character
+ *	[^Z]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_tty_sigtstp(EditLine *el __attribute__((__unused__)), 
+	       Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_tty_stop_output():
+ *	Tty disallow output characters
+ *	[^S]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_tty_stop_output(EditLine *el __attribute__((__unused__)), 
+		   Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_tty_start_output():
+ *	Tty allow output characters
+ *	[^Q]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_tty_start_output(EditLine *el __attribute__((__unused__)), 
+		    Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_newline():
+ *	Execute command
+ *	[^J]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_newline(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	re_goto_bottom(el);
+	*el->el_line.lastchar++ = '\n';
+	*el->el_line.lastchar = '\0';
+	return CC_NEWLINE;
+}
+
+
+/* ed_delete_prev_char():
+ *	Delete the character to the left of the cursor
+ *	[^?]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_delete_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor <= el->el_line.buffer)
+		return CC_ERROR;
+
+	c_delbefore(el, el->el_state.argument);
+	el->el_line.cursor -= el->el_state.argument;
+	if (el->el_line.cursor < el->el_line.buffer)
+		el->el_line.cursor = el->el_line.buffer;
+	return CC_REFRESH;
+}
+
+
+/* ed_clear_screen():
+ *	Clear screen leaving current line at the top
+ *	[^L]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_clear_screen(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	terminal_clear_screen(el);	/* clear the whole real screen */
+	re_clear_display(el);	/* reset everything */
+	return CC_REFRESH;
+}
+
+
+/* ed_redisplay():
+ *	Redisplay everything
+ *	^R
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_redisplay(EditLine *el __attribute__((__unused__)), 
+	     Int c __attribute__((__unused__)))
+{
+
+	return CC_REDISPLAY;
+}
+
+
+/* ed_start_over():
+ *	Erase current line and start from scratch
+ *	[^G]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_start_over(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	ch_reset(el, 0);
+	return CC_REFRESH;
+}
+
+
+/* ed_sequence_lead_in():
+ *	First character in a bound sequence
+ *	Placeholder for external keys
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_sequence_lead_in(EditLine *el __attribute__((__unused__)), 
+		    Int c __attribute__((__unused__)))
+{
+
+	return CC_NORM;
+}
+
+
+/* ed_prev_history():
+ *	Move to the previous history line
+ *	[^P] [k]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_prev_history(EditLine *el, Int c __attribute__((__unused__)))
+{
+	char beep = 0;
+	int sv_event = el->el_history.eventno;
+
+	el->el_chared.c_undo.len = -1;
+	*el->el_line.lastchar = '\0';		/* just in case */
+
+	if (el->el_history.eventno == 0) {	/* save the current buffer
+						 * away */
+		(void) Strncpy(el->el_history.buf, el->el_line.buffer,
+		    EL_BUFSIZ);
+		el->el_history.last = el->el_history.buf +
+		    (el->el_line.lastchar - el->el_line.buffer);
+	}
+	el->el_history.eventno += el->el_state.argument;
+
+	if (hist_get(el) == CC_ERROR) {
+		if (el->el_map.type == MAP_VI) {
+			el->el_history.eventno = sv_event;
+			
+		}
+		beep = 1;
+		/* el->el_history.eventno was fixed by first call */
+		(void) hist_get(el);
+	}
+	if (beep)
+		return CC_REFRESH_BEEP;
+	return CC_REFRESH;
+}
+
+
+/* ed_next_history():
+ *	Move to the next history line
+ *	[^N] [j]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_next_history(EditLine *el, Int c __attribute__((__unused__)))
+{
+	el_action_t beep = CC_REFRESH, rval;
+
+	el->el_chared.c_undo.len = -1;
+	*el->el_line.lastchar = '\0';	/* just in case */
+
+	el->el_history.eventno -= el->el_state.argument;
+
+	if (el->el_history.eventno < 0) {
+		el->el_history.eventno = 0;
+		beep = CC_REFRESH_BEEP;
+	}
+	rval = hist_get(el);
+	if (rval == CC_REFRESH)
+		return beep;
+	return rval;
+
+}
+
+
+/* ed_search_prev_history():
+ *	Search previous in history for a line matching the current
+ *	next search history [M-P] [K]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_search_prev_history(EditLine *el, Int c __attribute__((__unused__)))
+{
+	const Char *hp;
+	int h;
+	bool_t found = 0;
+
+	el->el_chared.c_vcmd.action = NOP;
+	el->el_chared.c_undo.len = -1;
+	*el->el_line.lastchar = '\0';	/* just in case */
+	if (el->el_history.eventno < 0) {
+#ifdef DEBUG_EDIT
+		(void) fprintf(el->el_errfile,
+		    "e_prev_search_hist(): eventno < 0;\n");
+#endif
+		el->el_history.eventno = 0;
+		return CC_ERROR;
+	}
+	if (el->el_history.eventno == 0) {
+		(void) Strncpy(el->el_history.buf, el->el_line.buffer,
+		    EL_BUFSIZ);
+		el->el_history.last = el->el_history.buf +
+		    (el->el_line.lastchar - el->el_line.buffer);
+	}
+	if (el->el_history.ref == NULL)
+		return CC_ERROR;
+
+	hp = HIST_FIRST(el);
+	if (hp == NULL)
+		return CC_ERROR;
+
+	c_setpat(el);		/* Set search pattern !! */
+
+	for (h = 1; h <= el->el_history.eventno; h++)
+		hp = HIST_NEXT(el);
+
+	while (hp != NULL) {
+#ifdef SDEBUG
+		(void) fprintf(el->el_errfile, "Comparing with \"%s\"\n", hp);
+#endif
+		if ((Strncmp(hp, el->el_line.buffer, (size_t)
+			    (el->el_line.lastchar - el->el_line.buffer)) ||
+			hp[el->el_line.lastchar - el->el_line.buffer]) &&
+		    c_hmatch(el, hp)) {
+			found++;
+			break;
+		}
+		h++;
+		hp = HIST_NEXT(el);
+	}
+
+	if (!found) {
+#ifdef SDEBUG
+		(void) fprintf(el->el_errfile, "not found\n");
+#endif
+		return CC_ERROR;
+	}
+	el->el_history.eventno = h;
+
+	return hist_get(el);
+}
+
+
+/* ed_search_next_history():
+ *	Search next in history for a line matching the current
+ *	[M-N] [J]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_search_next_history(EditLine *el, Int c __attribute__((__unused__)))
+{
+	const Char *hp;
+	int h;
+	bool_t found = 0;
+
+	el->el_chared.c_vcmd.action = NOP;
+	el->el_chared.c_undo.len = -1;
+	*el->el_line.lastchar = '\0';	/* just in case */
+
+	if (el->el_history.eventno == 0)
+		return CC_ERROR;
+
+	if (el->el_history.ref == NULL)
+		return CC_ERROR;
+
+	hp = HIST_FIRST(el);
+	if (hp == NULL)
+		return CC_ERROR;
+
+	c_setpat(el);		/* Set search pattern !! */
+
+	for (h = 1; h < el->el_history.eventno && hp; h++) {
+#ifdef SDEBUG
+		(void) fprintf(el->el_errfile, "Comparing with \"%s\"\n", hp);
+#endif
+		if ((Strncmp(hp, el->el_line.buffer, (size_t)
+			    (el->el_line.lastchar - el->el_line.buffer)) ||
+			hp[el->el_line.lastchar - el->el_line.buffer]) &&
+		    c_hmatch(el, hp))
+			found = h;
+		hp = HIST_NEXT(el);
+	}
+
+	if (!found) {		/* is it the current history number? */
+		if (!c_hmatch(el, el->el_history.buf)) {
+#ifdef SDEBUG
+			(void) fprintf(el->el_errfile, "not found\n");
+#endif
+			return CC_ERROR;
+		}
+	}
+	el->el_history.eventno = found;
+
+	return hist_get(el);
+}
+
+
+/* ed_prev_line():
+ *	Move up one line
+ *	Could be [k] [^p]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_prev_line(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *ptr;
+	int nchars = c_hpos(el);
+
+	/*
+         * Move to the line requested
+         */
+	if (*(ptr = el->el_line.cursor) == '\n')
+		ptr--;
+
+	for (; ptr >= el->el_line.buffer; ptr--)
+		if (*ptr == '\n' && --el->el_state.argument <= 0)
+			break;
+
+	if (el->el_state.argument > 0)
+		return CC_ERROR;
+
+	/*
+         * Move to the beginning of the line
+         */
+	for (ptr--; ptr >= el->el_line.buffer && *ptr != '\n'; ptr--)
+		continue;
+
+	/*
+         * Move to the character requested
+         */
+	for (ptr++;
+	    nchars-- > 0 && ptr < el->el_line.lastchar && *ptr != '\n';
+	    ptr++)
+		continue;
+
+	el->el_line.cursor = ptr;
+	return CC_CURSOR;
+}
+
+
+/* ed_next_line():
+ *	Move down one line
+ *	Could be [j] [^n]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_next_line(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *ptr;
+	int nchars = c_hpos(el);
+
+	/*
+         * Move to the line requested
+         */
+	for (ptr = el->el_line.cursor; ptr < el->el_line.lastchar; ptr++)
+		if (*ptr == '\n' && --el->el_state.argument <= 0)
+			break;
+
+	if (el->el_state.argument > 0)
+		return CC_ERROR;
+
+	/*
+         * Move to the character requested
+         */
+	for (ptr++;
+	    nchars-- > 0 && ptr < el->el_line.lastchar && *ptr != '\n';
+	    ptr++)
+		continue;
+
+	el->el_line.cursor = ptr;
+	return CC_CURSOR;
+}
+
+
+/* ed_command():
+ *	Editline extended command
+ *	[M-X] [:]
+ */
+protected el_action_t
+/*ARGSUSED*/
+ed_command(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char tmpbuf[EL_BUFSIZ];
+	int tmplen;
+
+	tmplen = c_gets(el, tmpbuf, STR("\n: "));
+	terminal__putc(el, '\n');
+
+	if (tmplen < 0 || (tmpbuf[tmplen] = 0, parse_line(el, tmpbuf)) == -1)
+		terminal_beep(el);
+
+	el->el_map.current = el->el_map.key;
+	re_clear_display(el);
+	return CC_REFRESH;
+}
diff --git a/src/editline/readline.h b/src/editline/readline.h
new file mode 100644
index 0000000..932febb
--- /dev/null
+++ b/src/editline/readline.h
@@ -0,0 +1,224 @@
+/*	$NetBSD: readline.h,v 1.34 2013/05/28 00:10:34 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1997 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jaromir Dolecek.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _READLINE_H_
+#define _READLINE_H_
+
+#include <sys/types.h>
+#include <stdio.h>
+
+/* list of readline stuff supported by editline library's readline wrapper */
+
+/* typedefs */
+typedef int	  Function(const char *, int);
+typedef void	  VFunction(void);
+typedef void	  VCPFunction(char *);
+typedef char	 *CPFunction(const char *, int);
+typedef char	**CPPFunction(const char *, int, int);
+typedef char     *rl_compentry_func_t(const char *, int);
+typedef int	  rl_command_func_t(int, int);
+
+/* only supports length */
+typedef struct {
+	int length;
+} HISTORY_STATE;
+
+typedef void *histdata_t;
+
+typedef struct _hist_entry {
+	const char	*line;
+	histdata_t 	 data;
+} HIST_ENTRY;
+
+typedef struct _keymap_entry {
+	char type;
+#define ISFUNC	0
+#define ISKMAP	1
+#define ISMACR	2
+	Function *function;
+} KEYMAP_ENTRY;
+
+#define KEYMAP_SIZE	256
+
+typedef KEYMAP_ENTRY KEYMAP_ENTRY_ARRAY[KEYMAP_SIZE];
+typedef KEYMAP_ENTRY *Keymap;
+
+#define control_character_threshold	0x20
+#define control_character_bit		0x40
+
+#ifndef CTRL
+#include <sys/ioctl.h>
+#if !defined(__sun) && !defined(__hpux) && !defined(_AIX)
+#include <sys/ttydefaults.h>
+#endif
+#ifndef CTRL
+#define CTRL(c)		((c) & 037)
+#endif
+#endif
+#ifndef UNCTRL
+#define UNCTRL(c)	(((c) - 'a' + 'A')|control_character_bit)
+#endif
+
+#define RUBOUT		0x7f
+#define ABORT_CHAR	CTRL('G')
+#define RL_READLINE_VERSION 	0x0402
+#define RL_PROMPT_START_IGNORE	'\1'
+#define RL_PROMPT_END_IGNORE	'\2'
+
+/* global variables used by readline enabled applications */
+#ifdef __cplusplus
+extern "C" {
+#endif
+extern const char	*rl_library_version;
+extern int 		rl_readline_version; 
+extern char		*rl_readline_name;
+extern FILE		*rl_instream;
+extern FILE		*rl_outstream;
+extern char		*rl_line_buffer;
+extern int		 rl_point, rl_end;
+extern int		 history_base, history_length;
+extern int		 max_input_history;
+extern char		*rl_basic_word_break_characters;
+extern char		*rl_completer_word_break_characters;
+extern char		*rl_completer_quote_characters;
+extern Function		*rl_completion_entry_function;
+extern char		*(*rl_completion_word_break_hook)(void);
+extern CPPFunction	*rl_attempted_completion_function;
+extern int		 rl_attempted_completion_over;
+extern int		rl_completion_type;
+extern int		rl_completion_query_items;
+extern char		*rl_special_prefixes;
+extern int		rl_completion_append_character;
+extern int		rl_inhibit_completion;
+extern Function		*rl_pre_input_hook;
+extern Function		*rl_startup_hook;
+extern char		*rl_terminal_name;
+extern int		rl_already_prompted;
+extern char		*rl_prompt;
+/*
+ * The following is not implemented
+ */
+extern int		rl_catch_signals;
+extern int		rl_catch_sigwinch;
+extern KEYMAP_ENTRY_ARRAY emacs_standard_keymap,
+			emacs_meta_keymap,
+			emacs_ctlx_keymap;
+extern int		rl_filename_completion_desired;
+extern int		rl_ignore_completion_duplicates;
+extern int		(*rl_getc_function)(FILE *);
+extern VFunction	*rl_redisplay_function;
+extern VFunction	*rl_completion_display_matches_hook;
+extern VFunction	*rl_prep_term_function;
+extern VFunction	*rl_deprep_term_function;
+extern int		readline_echoing_p;
+extern int		_rl_print_completions_horizontally;
+
+/* supported functions */
+char		*readline(const char *);
+int		 rl_initialize(void);
+
+void		 using_history(void);
+int		 add_history(const char *);
+void		 clear_history(void);
+void		 stifle_history(int);
+int		 unstifle_history(void);
+int		 history_is_stifled(void);
+int		 where_history(void);
+HIST_ENTRY	*current_history(void);
+HIST_ENTRY	*history_get(int);
+HIST_ENTRY	*remove_history(int);
+HIST_ENTRY	*replace_history_entry(int, const char *, histdata_t);
+int		 history_total_bytes(void);
+int		 history_set_pos(int);
+HIST_ENTRY	*previous_history(void);
+HIST_ENTRY	*next_history(void);
+int		 history_search(const char *, int);
+int		 history_search_prefix(const char *, int);
+int		 history_search_pos(const char *, int, int);
+int		 read_history(const char *);
+int		 write_history(const char *);
+int		 history_truncate_file (const char *, int);
+int		 history_expand(char *, char **);
+char	       **history_tokenize(const char *);
+const char	*get_history_event(const char *, int *, int);
+char		*history_arg_extract(int, int, const char *);
+
+char		*tilde_expand(char *);
+char		*filename_completion_function(const char *, int);
+char		*username_completion_function(const char *, int);
+int		 rl_complete(int, int);
+int		 rl_read_key(void);
+char	       **completion_matches(const char *, CPFunction *);
+void		 rl_display_match_list(char **, int, int);
+
+int		 rl_insert(int, int);
+int		 rl_insert_text(const char *);
+void		 rl_reset_terminal(const char *);
+int		 rl_bind_key(int, rl_command_func_t *);
+int		 rl_newline(int, int);
+void		 rl_callback_read_char(void);
+void		 rl_callback_handler_install(const char *, VCPFunction *);
+void		 rl_callback_handler_remove(void);
+void		 rl_redisplay(void);
+int		 rl_get_previous_history(int, int);
+void		 rl_prep_terminal(int);
+void		 rl_deprep_terminal(void);
+int		 rl_read_init_file(const char *);
+int		 rl_parse_and_bind(const char *);
+int		 rl_variable_bind(const char *, const char *);
+void		 rl_stuff_char(int);
+int		 rl_add_defun(const char *, Function *, int);
+HISTORY_STATE	*history_get_history_state(void);
+void		 rl_get_screen_size(int *, int *);
+void		 rl_set_screen_size(int, int);
+char 		*rl_filename_completion_function (const char *, int);
+int		 _rl_abort_internal(void);
+int		 _rl_qsort_string_compare(char **, char **);
+char 	       **rl_completion_matches(const char *, rl_compentry_func_t *);
+void		 rl_forced_update_display(void);
+int		 rl_set_prompt(const char *);
+int		 rl_on_new_line(void);
+
+/*
+ * The following are not implemented
+ */
+int		 rl_kill_text(int, int);
+Keymap		 rl_get_keymap(void);
+void		 rl_set_keymap(Keymap);
+Keymap		 rl_make_bare_keymap(void);
+int		 rl_generic_bind(int, const char *, const char *, Keymap);
+int		 rl_bind_key_in_map(int, rl_command_func_t *, Keymap);
+void		 rl_cleanup_after_signal(void);
+void		 rl_free_line_state(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _READLINE_H_ */
diff --git a/src/el.c b/src/el.c
new file mode 100644
index 0000000..3726b9b
--- /dev/null
+++ b/src/el.c
@@ -0,0 +1,641 @@
+/*	$NetBSD: el.c,v 1.72 2013/01/22 20:23:21 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)el.c	8.2 (Berkeley) 1/3/94";
+#else
+__RCSID("$NetBSD: el.c,v 1.72 2013/01/22 20:23:21 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+#ifndef MAXPATHLEN
+#define MAXPATHLEN 4096
+#endif
+
+/*
+ * el.c: EditLine interface functions
+ */
+#include <sys/types.h>
+#include <sys/param.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <locale.h>
+#include <langinfo.h>
+#include "el.h"
+
+#ifndef HAVE_SECURE_GETENV
+#	ifdef HAVE___SECURE_GETENV
+#		define secure_getenv __secure_getenv
+#		define HAVE_SECURE_GETENV 1
+#	else
+#		ifdef HAVE_ISSETUGID
+#			include <unistd.h>
+#		else
+#			undef issetugid
+#			define issetugid() 1
+#		endif
+#	endif
+#endif
+
+#ifndef HAVE_SECURE_GETENV
+char *secure_getenv(char const *name)
+{
+	if (issetugid())
+		return 0;
+	return getenv(name);
+}
+#endif
+
+/* el_init():
+ *	Initialize editline and set default parameters.
+ */
+public EditLine *
+el_init(const char *prog, FILE *fin, FILE *fout, FILE *ferr)
+{
+    return el_init_fd(prog, fin, fout, ferr, fileno(fin), fileno(fout),
+	fileno(ferr));
+}
+
+public EditLine *
+el_init_fd(const char *prog, FILE *fin, FILE *fout, FILE *ferr,
+    int fdin, int fdout, int fderr)
+{
+	EditLine *el = el_malloc(sizeof(*el));
+
+	if (el == NULL)
+		return NULL;
+
+	memset(el, 0, sizeof(EditLine));
+
+	el->el_infile = fin;
+	el->el_outfile = fout;
+	el->el_errfile = ferr;
+
+	el->el_infd = fdin;
+	el->el_outfd = fdout;
+	el->el_errfd = fderr;
+
+	el->el_prog = Strdup(ct_decode_string(prog, &el->el_scratch));
+	if (el->el_prog == NULL) {
+		el_free(el);
+		return NULL;
+	}
+
+	/*
+         * Initialize all the modules. Order is important!!!
+         */
+	el->el_flags = 0;
+#ifdef WIDECHAR
+	if (setlocale(LC_CTYPE, NULL) != NULL){
+		if (strcmp(nl_langinfo(CODESET), "UTF-8") == 0)
+			el->el_flags |= CHARSET_IS_UTF8;
+	}
+#endif
+
+	if (terminal_init(el) == -1) {
+		el_free(el->el_prog);
+		el_free(el);
+		return NULL;
+	}
+	(void) keymacro_init(el);
+	(void) map_init(el);
+	if (tty_init(el) == -1)
+		el->el_flags |= NO_TTY;
+	(void) ch_init(el);
+	(void) search_init(el);
+	(void) hist_init(el);
+	(void) prompt_init(el);
+	(void) sig_init(el);
+	(void) read_init(el);
+
+	return el;
+}
+
+
+/* el_end():
+ *	Clean up.
+ */
+public void
+el_end(EditLine *el)
+{
+
+	if (el == NULL)
+		return;
+
+	el_reset(el);
+
+	terminal_end(el);
+	keymacro_end(el);
+	map_end(el);
+	tty_end(el);
+	ch_end(el);
+	search_end(el);
+	hist_end(el);
+	prompt_end(el);
+	sig_end(el);
+
+	el_free(el->el_prog);
+#ifdef WIDECHAR
+	el_free(el->el_scratch.cbuff);
+	el_free(el->el_scratch.wbuff);
+	el_free(el->el_lgcyconv.cbuff);
+	el_free(el->el_lgcyconv.wbuff);
+#endif
+	el_free(el);
+}
+
+
+/* el_reset():
+ *	Reset the tty and the parser
+ */
+public void
+el_reset(EditLine *el)
+{
+
+	tty_cookedmode(el);
+	ch_reset(el, 0);		/* XXX: Do we want that? */
+}
+
+
+/* el_set():
+ *	set the editline parameters
+ */
+public int
+FUN(el,set)(EditLine *el, int op, ...)
+{
+	va_list ap;
+	int rv = 0;
+
+	if (el == NULL)
+		return -1;
+	va_start(ap, op);
+
+	switch (op) {
+	case EL_PROMPT:
+	case EL_RPROMPT: {
+		el_pfunc_t p = va_arg(ap, el_pfunc_t);
+
+		rv = prompt_set(el, p, 0, op, 1);
+		break;
+	}
+
+	case EL_RESIZE: {
+		el_zfunc_t p = va_arg(ap, el_zfunc_t);
+		void *arg = va_arg(ap, void *);
+		rv = ch_resizefun(el, p, arg);
+		break;
+	}
+
+	case EL_PROMPT_ESC:
+	case EL_RPROMPT_ESC: {
+		el_pfunc_t p = va_arg(ap, el_pfunc_t);
+		int c = va_arg(ap, int);
+
+		rv = prompt_set(el, p, c, op, 1);
+		break;
+	}
+
+	case EL_TERMINAL:
+		rv = terminal_set(el, va_arg(ap, char *));
+		break;
+
+	case EL_EDITOR:
+		rv = map_set_editor(el, va_arg(ap, Char *));
+		break;
+
+	case EL_SIGNAL:
+		if (va_arg(ap, int))
+			el->el_flags |= HANDLE_SIGNALS;
+		else
+			el->el_flags &= ~HANDLE_SIGNALS;
+		break;
+
+	case EL_BIND:
+	case EL_TELLTC:
+	case EL_SETTC:
+	case EL_ECHOTC:
+	case EL_SETTY:
+	{
+		const Char *argv[20];
+		int i;
+
+		for (i = 1; i < (int)__arraycount(argv); i++)
+			if ((argv[i] = va_arg(ap, Char *)) == NULL)
+				break;
+
+		switch (op) {
+		case EL_BIND:
+			argv[0] = STR("bind");
+			rv = map_bind(el, i, argv);
+			break;
+
+		case EL_TELLTC:
+			argv[0] = STR("telltc");
+			rv = terminal_telltc(el, i, argv);
+			break;
+
+		case EL_SETTC:
+			argv[0] = STR("settc");
+			rv = terminal_settc(el, i, argv);
+			break;
+
+		case EL_ECHOTC:
+			argv[0] = STR("echotc");
+			rv = terminal_echotc(el, i, argv);
+			break;
+
+		case EL_SETTY:
+			argv[0] = STR("setty");
+			rv = tty_stty(el, i, argv);
+			break;
+
+		default:
+			rv = -1;
+			EL_ABORT((el->el_errfile, "Bad op %d\n", op));
+			break;
+		}
+		break;
+	}
+
+	case EL_ADDFN:
+	{
+		Char *name = va_arg(ap, Char *);
+		Char *help = va_arg(ap, Char *);
+		el_func_t func = va_arg(ap, el_func_t);
+
+		rv = map_addfunc(el, name, help, func);
+		break;
+	}
+
+	case EL_HIST:
+	{
+		hist_fun_t func = va_arg(ap, hist_fun_t);
+		void *ptr = va_arg(ap, void *);
+
+		rv = hist_set(el, func, ptr);
+		if (!(el->el_flags & CHARSET_IS_UTF8))
+			el->el_flags &= ~NARROW_HISTORY;
+		break;
+	}
+
+	case EL_EDITMODE:
+		if (va_arg(ap, int))
+			el->el_flags &= ~EDIT_DISABLED;
+		else
+			el->el_flags |= EDIT_DISABLED;
+		rv = 0;
+		break;
+
+	case EL_GETCFN:
+	{
+		el_rfunc_t rc = va_arg(ap, el_rfunc_t);
+		rv = el_read_setfn(el, rc);
+		el->el_flags &= ~NARROW_READ;
+		break;
+	}
+
+	case EL_CLIENTDATA:
+		el->el_data = va_arg(ap, void *);
+		break;
+
+	case EL_UNBUFFERED:
+		rv = va_arg(ap, int);
+		if (rv && !(el->el_flags & UNBUFFERED)) {
+			el->el_flags |= UNBUFFERED;
+			read_prepare(el);
+		} else if (!rv && (el->el_flags & UNBUFFERED)) {
+			el->el_flags &= ~UNBUFFERED;
+			read_finish(el);
+		}
+		rv = 0;
+		break;
+
+	case EL_PREP_TERM:
+		rv = va_arg(ap, int);
+		if (rv)
+			(void) tty_rawmode(el);
+		else
+			(void) tty_cookedmode(el);
+		rv = 0;
+		break;
+
+	case EL_SETFP:
+	{
+		FILE *fp;
+		int what;
+
+		what = va_arg(ap, int);
+		fp = va_arg(ap, FILE *);
+
+		rv = 0;
+		switch (what) {
+		case 0:
+			el->el_infile = fp;
+			el->el_infd = fileno(fp);
+			break;
+		case 1:
+			el->el_outfile = fp;
+			el->el_outfd = fileno(fp);
+			break;
+		case 2:
+			el->el_errfile = fp;
+			el->el_errfd = fileno(fp);
+			break;
+		default:
+			rv = -1;
+			break;
+		}
+		break;
+	}
+
+	case EL_REFRESH:
+		re_clear_display(el);
+		re_refresh(el);
+		terminal__flush(el);
+		break;
+
+	default:
+		rv = -1;
+		break;
+	}
+
+	va_end(ap);
+	return rv;
+}
+
+
+/* el_get():
+ *	retrieve the editline parameters
+ */
+public int
+FUN(el,get)(EditLine *el, int op, ...)
+{
+	va_list ap;
+	int rv;
+
+	if (el == NULL)
+		return -1;
+
+	va_start(ap, op);
+
+	switch (op) {
+	case EL_PROMPT:
+	case EL_RPROMPT: {
+		el_pfunc_t *p = va_arg(ap, el_pfunc_t *);
+		rv = prompt_get(el, p, 0, op);
+		break;
+	}
+	case EL_PROMPT_ESC:
+	case EL_RPROMPT_ESC: {
+		el_pfunc_t *p = va_arg(ap, el_pfunc_t *);
+		Char *c = va_arg(ap, Char *);
+
+		rv = prompt_get(el, p, c, op);
+		break;
+	}
+
+	case EL_EDITOR:
+		rv = map_get_editor(el, va_arg(ap, const Char **));
+		break;
+
+	case EL_SIGNAL:
+		*va_arg(ap, int *) = (el->el_flags & HANDLE_SIGNALS);
+		rv = 0;
+		break;
+
+	case EL_EDITMODE:
+		*va_arg(ap, int *) = !(el->el_flags & EDIT_DISABLED);
+		rv = 0;
+		break;
+
+	case EL_TERMINAL:
+		terminal_get(el, va_arg(ap, const char **));
+		rv = 0;
+		break;
+
+	case EL_GETTC:
+	{
+		static char name[] = "gettc";
+		char *argv[20];
+		int i;
+
+ 		for (i = 1; i < (int)__arraycount(argv); i++)
+			if ((argv[i] = va_arg(ap, char *)) == NULL)
+				break;
+
+		argv[0] = name;
+		rv = terminal_gettc(el, i, argv);
+		break;
+	}
+
+	case EL_GETCFN:
+		*va_arg(ap, el_rfunc_t *) = el_read_getfn(el);
+		rv = 0;
+		break;
+
+	case EL_CLIENTDATA:
+		*va_arg(ap, void **) = el->el_data;
+		rv = 0;
+		break;
+
+	case EL_UNBUFFERED:
+		*va_arg(ap, int *) = (el->el_flags & UNBUFFERED) != 0;
+		rv = 0;
+		break;
+
+	case EL_GETFP:
+	{
+		int what;
+		FILE **fpp;
+
+		what = va_arg(ap, int);
+		fpp = va_arg(ap, FILE **);
+		rv = 0;
+		switch (what) {
+		case 0:
+			*fpp = el->el_infile;
+			break;
+		case 1:
+			*fpp = el->el_outfile;
+			break;
+		case 2:
+			*fpp = el->el_errfile;
+			break;
+		default:
+			rv = -1;
+			break;
+		}
+		break;
+	}
+	default:
+		rv = -1;
+		break;
+	}
+	va_end(ap);
+
+	return rv;
+}
+
+
+/* el_line():
+ *	Return editing info
+ */
+public const TYPE(LineInfo) *
+FUN(el,line)(EditLine *el)
+{
+
+	return (const TYPE(LineInfo) *)(void *)&el->el_line;
+}
+
+
+/* el_source():
+ *	Source a file
+ */
+public int
+el_source(EditLine *el, const char *fname)
+{
+	FILE *fp;
+	size_t len;
+	char *ptr;
+	char *path = NULL;
+	const Char *dptr;
+	int error = 0;
+
+	fp = NULL;
+	if (fname == NULL) {
+		static const char elpath[] = "/.editrc";
+		size_t plen = sizeof(elpath);
+
+		if ((ptr = secure_getenv("HOME")) == NULL)
+			return -1;
+		plen += strlen(ptr);
+		if ((path = el_malloc(plen * sizeof(*path))) == NULL)
+			return -1;
+		(void)snprintf(path, plen, "%s%s", ptr, elpath);
+		fname = path;
+	}
+	if (fp == NULL)
+		fp = fopen(fname, "r");
+	if (fp == NULL) {
+		el_free(path);
+		return -1;
+	}
+
+	while ((ptr = fgetln(fp, &len)) != NULL) {
+		if (*ptr == '\n')
+			continue;	/* Empty line. */
+		dptr = ct_decode_string(ptr, &el->el_scratch);
+		if (!dptr)
+			continue;
+		if (len > 0 && dptr[len - 1] == '\n')
+			--len;
+
+		/* loop until first non-space char or EOL */
+		while (*dptr != '\0' && Isspace(*dptr))
+			dptr++;
+		if (*dptr == '#')
+			continue;   /* ignore, this is a comment line */
+		if ((error = parse_line(el, dptr)) == -1)
+			break;
+	}
+
+	el_free(path);
+	(void) fclose(fp);
+	return error;
+}
+
+
+/* el_resize():
+ *	Called from program when terminal is resized
+ */
+public void
+el_resize(EditLine *el)
+{
+	int lins, cols;
+	sigset_t oset, nset;
+
+	(void) sigemptyset(&nset);
+	(void) sigaddset(&nset, SIGWINCH);
+	(void) sigprocmask(SIG_BLOCK, &nset, &oset);
+
+	/* get the correct window size */
+	if (terminal_get_size(el, &lins, &cols))
+		terminal_change_size(el, lins, cols);
+
+	(void) sigprocmask(SIG_SETMASK, &oset, NULL);
+}
+
+
+/* el_beep():
+ *	Called from the program to beep
+ */
+public void
+el_beep(EditLine *el)
+{
+
+	terminal_beep(el);
+}
+
+
+/* el_editmode()
+ *	Set the state of EDIT_DISABLED from the `edit' command.
+ */
+protected int
+/*ARGSUSED*/
+el_editmode(EditLine *el, int argc, const Char **argv)
+{
+	const Char *how;
+
+	if (argv == NULL || argc != 2 || argv[1] == NULL)
+		return -1;
+
+	how = argv[1];
+	if (Strcmp(how, STR("on")) == 0) {
+		el->el_flags &= ~EDIT_DISABLED;
+		tty_rawmode(el);
+	} else if (Strcmp(how, STR("off")) == 0) {
+		tty_cookedmode(el);
+		el->el_flags |= EDIT_DISABLED;
+	}
+	else {
+		(void) fprintf(el->el_errfile, "edit: Bad value `" FSTR "'.\n",
+		    how);
+		return -1;
+	}
+	return 0;
+}
diff --git a/src/el.h b/src/el.h
new file mode 100644
index 0000000..70c67b8
--- /dev/null
+++ b/src/el.h
@@ -0,0 +1,163 @@
+/*	$NetBSD: el.h,v 1.25 2011/07/29 23:44:44 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)el.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.h: Internal structures.
+ */
+#ifndef _h_el
+#define	_h_el
+/*
+ * Local defaults
+ */
+#define	KSHVI
+#define	VIDEFAULT
+#define	ANCHOR
+
+#include "histedit.h"
+#include "chartype.h"
+#include <stdio.h>
+#include <sys/types.h>
+
+#define	EL_BUFSIZ	((size_t)1024)	/* Maximum line size		*/
+
+#define	HANDLE_SIGNALS	0x01
+#define	NO_TTY		0x02
+#define	EDIT_DISABLED	0x04
+#define	UNBUFFERED	0x08
+#define	CHARSET_IS_UTF8 0x10
+#define	IGNORE_EXTCHARS 0x20            /* Ignore characters read > 0xff */
+#define	NARROW_HISTORY	0x40
+#define	NARROW_READ	0x80
+
+typedef int bool_t;			/* True or not			*/
+
+typedef unsigned char el_action_t;	/* Index to command array	*/
+
+typedef struct coord_t {		/* Position on the screen	*/
+	int	h;
+	int	v;
+} coord_t;
+
+typedef struct el_line_t {
+	Char 		*buffer;	/* Input line			*/
+	Char	        *cursor;	/* Cursor position		*/
+	Char	        *lastchar;	/* Last character		*/
+	const Char	*limit;		/* Max position			*/
+} el_line_t;
+
+/*
+ * Editor state
+ */
+typedef struct el_state_t {
+	int		inputmode;	/* What mode are we in?		*/
+	int		doingarg;	/* Are we getting an argument?	*/
+	int		argument;	/* Numeric argument		*/
+	int		metanext;	/* Is the next char a meta char */
+	el_action_t	lastcmd;	/* Previous command		*/
+	el_action_t	thiscmd;	/* this command 		*/
+	Char		thisch;		/* char that generated it	*/
+} el_state_t;
+
+/*
+ * Until we come up with something better...
+ */
+#define	el_malloc(a)	malloc(a)
+#define	el_realloc(a,b)	realloc(a, b)
+#define	el_free(a)	free(a)
+
+#include "tty.h"
+#include "prompt.h"
+#include "keymacro.h"
+#include "terminal.h"
+#include "refresh.h"
+#include "chared.h"
+#include "common.h"
+#include "search.h"
+#include "hist.h"
+#include "map.h"
+#include "parse.h"
+#include "sig.h"
+#include "help.h"
+#include "read.h"
+
+struct editline {
+	Char		 *el_prog;	/* the program name		*/
+	FILE		 *el_infile;	/* Stdio stuff			*/
+	FILE		 *el_outfile;	/* Stdio stuff			*/
+	FILE		 *el_errfile;	/* Stdio stuff			*/
+	int		  el_infd;	/* Input file descriptor	*/
+	int		  el_outfd;	/* Output file descriptor	*/
+	int		  el_errfd;	/* Error file descriptor	*/
+	int		  el_flags;	/* Various flags.		*/
+	int		  el_errno;	/* Local copy of errno		*/
+	coord_t		  el_cursor;	/* Cursor location		*/
+	Char		**el_display;	/* Real screen image = what is there */
+	Char		**el_vdisplay;	/* Virtual screen image = what we see */
+	void		 *el_data;	/* Client data			*/
+	el_line_t	  el_line;	/* The current line information	*/
+	el_state_t	  el_state;	/* Current editor state		*/
+	el_terminal_t	  el_terminal;	/* Terminal dependent stuff	*/
+	el_tty_t	  el_tty;	/* Tty dependent stuff		*/
+	el_refresh_t	  el_refresh;	/* Refresh stuff		*/
+	el_prompt_t	  el_prompt;	/* Prompt stuff			*/
+	el_prompt_t	  el_rprompt;	/* Prompt stuff			*/
+	el_chared_t	  el_chared;	/* Characted editor stuff	*/
+	el_map_t	  el_map;	/* Key mapping stuff		*/
+	el_keymacro_t	  el_keymacro;	/* Key binding stuff		*/
+	el_history_t	  el_history;	/* History stuff		*/
+	el_search_t	  el_search;	/* Search stuff			*/
+	el_signal_t	  el_signal;	/* Signal handling stuff	*/
+	el_read_t	  el_read;	/* Character reading stuff	*/
+#ifdef WIDECHAR
+	ct_buffer_t       el_scratch;   /* Scratch conversion buffer    */
+	ct_buffer_t       el_lgcyconv;  /* Buffer for legacy wrappers   */
+	LineInfo          el_lgcylinfo; /* Legacy LineInfo buffer       */
+#endif
+};
+
+protected int	el_editmode(EditLine *, int, const Char **);
+
+#ifdef DEBUG
+#define	EL_ABORT(a)	do { \
+				fprintf(el->el_errfile, "%s, %d: ", \
+					 __FILE__, __LINE__); \
+				fprintf a; \
+				abort(); \
+			} while( /*CONSTCOND*/0);
+#else
+#define EL_ABORT(a)	abort()
+#endif
+#endif /* _h_el */
diff --git a/src/eln.c b/src/eln.c
new file mode 100644
index 0000000..1b829c2
--- /dev/null
+++ b/src/eln.c
@@ -0,0 +1,371 @@
+/*	$NetBSD: eln.c,v 1.14 2012/03/11 21:15:25 christos Exp $	*/
+
+/*-
+ * Copyright (c) 2009 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *        This product includes software developed by the NetBSD
+ *        Foundation, Inc. and its contributors.
+ * 4. Neither the name of The NetBSD Foundation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+__RCSID("$NetBSD: eln.c,v 1.14 2012/03/11 21:15:25 christos Exp $");
+#endif /* not lint && not SCCSID */
+
+#include "histedit.h"
+#include "el.h"
+#include "read.h"
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+public int
+el_getc(EditLine *el, char *cp)
+{
+	int num_read;
+	wchar_t wc = 0;
+
+	if (!(el->el_flags & CHARSET_IS_UTF8))
+		el->el_flags |= IGNORE_EXTCHARS;
+	num_read = el_wgetc (el, &wc);
+	if (!(el->el_flags & CHARSET_IS_UTF8))
+		el->el_flags &= ~IGNORE_EXTCHARS;
+
+	if (num_read > 0)
+		*cp = (char)wc;
+	return num_read;
+}
+
+
+public void
+el_push(EditLine *el, const char *str)
+{
+	/* Using multibyte->wide string decoding works fine under single-byte
+	 * character sets too, and Does The Right Thing. */
+	el_wpush(el, ct_decode_string(str, &el->el_lgcyconv));
+}
+
+
+public const char *
+el_gets(EditLine *el, int *nread)
+{
+	const wchar_t *tmp;
+
+	el->el_flags |= IGNORE_EXTCHARS;
+	tmp = el_wgets(el, nread);
+	el->el_flags &= ~IGNORE_EXTCHARS;
+	return ct_encode_string(tmp, &el->el_lgcyconv);
+}
+
+
+public int
+el_parse(EditLine *el, int argc, const char *argv[])
+{
+	int ret;
+	const wchar_t **wargv;
+
+	wargv = (const wchar_t **)
+	    ct_decode_argv(argc, argv, &el->el_lgcyconv);
+	if (!wargv)
+		return -1;
+	ret = el_wparse(el, argc, wargv);
+	ct_free_argv(wargv);
+
+	return ret;
+}
+
+
+public int
+el_set(EditLine *el, int op, ...)
+{
+	va_list ap;
+	int ret;
+
+	if (!el)
+		return -1;
+	va_start(ap, op);
+
+	switch (op) {
+	case EL_PROMPT:         /* el_pfunc_t */
+	case EL_RPROMPT: {
+		el_pfunc_t p = va_arg(ap, el_pfunc_t);
+		ret = prompt_set(el, p, 0, op, 0);
+		break;
+	}
+
+	case EL_RESIZE: {
+		el_zfunc_t p = va_arg(ap, el_zfunc_t);
+		void *arg = va_arg(ap, void *);
+		ret = ch_resizefun(el, p, arg);
+		break;
+	}
+
+	case EL_TERMINAL:       /* const char * */
+		ret = el_wset(el, op, va_arg(ap, char *));
+		break;
+
+	case EL_EDITOR:		/* const wchar_t * */
+		ret = el_wset(el, op, ct_decode_string(va_arg(ap, char *),
+		    &el->el_lgcyconv));
+		break;
+
+	case EL_SIGNAL:         /* int */
+	case EL_EDITMODE:
+	case EL_UNBUFFERED:
+	case EL_PREP_TERM:
+		ret = el_wset(el, op, va_arg(ap, int));
+		break;
+
+	case EL_BIND:   /* const char * list -> const wchar_t * list */
+	case EL_TELLTC:
+	case EL_SETTC:
+	case EL_ECHOTC:
+	case EL_SETTY: {
+		const char *argv[20];
+		int i;
+		const wchar_t **wargv;
+		for (i = 1; i < (int)__arraycount(argv); ++i)
+			if ((argv[i] = va_arg(ap, char *)) == NULL)
+			    break;
+		argv[0] = NULL;
+		wargv = (const wchar_t **)
+		    ct_decode_argv(i + 1, argv, &el->el_lgcyconv);
+		if (!wargv) {
+		    ret = -1;
+		    goto out;
+		}
+		/*
+		 * AFAIK we can't portably pass through our new wargv to
+		 * el_wset(), so we have to reimplement the body of
+		 * el_wset() for these ops.
+		 */
+		switch (op) {
+		case EL_BIND:
+			wargv[0] = STR("bind");
+			ret = map_bind(el, i, wargv);
+			break;
+		case EL_TELLTC:
+			wargv[0] = STR("telltc");
+			ret = terminal_telltc(el, i, wargv);
+			break;
+		case EL_SETTC:
+			wargv[0] = STR("settc");
+			ret = terminal_settc(el, i, wargv);
+			break;
+		case EL_ECHOTC:
+			wargv[0] = STR("echotc");
+			ret = terminal_echotc(el, i, wargv);
+			break;
+		case EL_SETTY:
+			wargv[0] = STR("setty");
+			ret = tty_stty(el, i, wargv);
+			break;
+		default:
+			ret = -1;
+		}
+		ct_free_argv(wargv);
+		break;
+	}
+
+	/* XXX: do we need to change el_func_t too? */
+	case EL_ADDFN: {          /* const char *, const char *, el_func_t */
+		const char *args[2];
+		el_func_t func;
+		wchar_t **wargv;
+
+		args[0] = va_arg(ap, const char *);
+		args[1] = va_arg(ap, const char *);
+		func = va_arg(ap, el_func_t);
+
+		wargv = ct_decode_argv(2, args, &el->el_lgcyconv);
+		if (!wargv) {
+		    ret = -1;
+		    goto out;
+		}
+		// XXX: The two strdup's leak
+		ret = map_addfunc(el, Strdup(wargv[0]), Strdup(wargv[1]),
+		    func);
+		ct_free_argv(wargv);
+		break;
+	}
+	case EL_HIST: {           /* hist_fun_t, const char * */
+		hist_fun_t fun = va_arg(ap, hist_fun_t);
+		void *ptr = va_arg(ap, void *);
+		ret = hist_set(el, fun, ptr);
+		el->el_flags |= NARROW_HISTORY;
+		break;
+	}
+	/* XXX: do we need to change el_rfunc_t? */
+	case EL_GETCFN:         /* el_rfunc_t */
+		ret = el_wset(el, op, va_arg(ap, el_rfunc_t));
+		el->el_flags |= NARROW_READ;
+		break;
+	case EL_CLIENTDATA:     /* void * */
+		ret = el_wset(el, op, va_arg(ap, void *));
+		break;
+	case EL_SETFP: {          /* int, FILE * */
+		int what = va_arg(ap, int);
+		FILE *fp = va_arg(ap, FILE *);
+		ret = el_wset(el, op, what, fp);
+		break;
+	}
+	case EL_PROMPT_ESC: /* el_pfunc_t, char */
+	case EL_RPROMPT_ESC: {
+		el_pfunc_t p = va_arg(ap, el_pfunc_t);
+		char c = (char)va_arg(ap, int);
+		ret = prompt_set(el, p, c, op, 0);
+		break;
+	}
+	default:
+		ret = -1;
+		break;
+	}
+
+out:
+	va_end(ap);
+	return ret;
+}
+
+
+public int
+el_get(EditLine *el, int op, ...)
+{
+	va_list ap;
+	int ret;
+
+	if (!el)
+		return -1;
+
+	va_start(ap, op);
+
+	switch (op) {
+	case EL_PROMPT:         /* el_pfunc_t * */
+	case EL_RPROMPT: {
+		el_pfunc_t *p = va_arg(ap, el_pfunc_t *);
+		ret = prompt_get(el, p, 0, op);
+		break;
+	}
+
+	case EL_PROMPT_ESC: /* el_pfunc_t *, char **/
+	case EL_RPROMPT_ESC: {
+		el_pfunc_t *p = va_arg(ap, el_pfunc_t *);
+		char *c = va_arg(ap, char *);
+		wchar_t wc = 0;
+		ret = prompt_get(el, p, &wc, op);
+		*c = (char)wc;
+		break;
+	}
+
+	case EL_EDITOR: {
+		const char **p = va_arg(ap, const char **);
+		const wchar_t *pw;
+		ret = el_wget(el, op, &pw);
+		*p = ct_encode_string(pw, &el->el_lgcyconv);
+		if (!el->el_lgcyconv.csize)
+			ret = -1;
+		break;
+	}
+
+	case EL_TERMINAL:       /* const char ** */
+		ret = el_wget(el, op, va_arg(ap, const char **));
+		break;
+
+	case EL_SIGNAL:         /* int * */
+	case EL_EDITMODE:
+	case EL_UNBUFFERED:
+	case EL_PREP_TERM:
+		ret = el_wget(el, op, va_arg(ap, int *));
+		break;
+
+	case EL_GETTC: {
+		char *argv[20];
+		static char gettc[] = "gettc";
+		int i;
+		for (i = 1; i < (int)__arraycount(argv); ++i)
+			if ((argv[i] = va_arg(ap, char *)) == NULL)
+				break;
+		argv[0] = gettc;
+		ret = terminal_gettc(el, i, argv);
+		break;
+	}
+
+	/* XXX: do we need to change el_rfunc_t? */
+	case EL_GETCFN:         /* el_rfunc_t */
+		ret = el_wget(el, op, va_arg(ap, el_rfunc_t *));
+		break;
+
+	case EL_CLIENTDATA:     /* void ** */
+		ret = el_wget(el, op, va_arg(ap, void **));
+		break;
+
+	case EL_GETFP: {          /* int, FILE ** */
+		int what = va_arg(ap, int);
+		FILE **fpp = va_arg(ap, FILE **);
+		ret = el_wget(el, op, what, fpp);
+		break;
+	}
+
+	default:
+		ret = -1;
+		break;
+	}
+
+	va_end(ap);
+	return ret;
+}
+
+
+const LineInfo *
+el_line(EditLine *el)
+{
+	const LineInfoW *winfo = el_wline(el);
+	LineInfo *info = &el->el_lgcylinfo;
+	size_t offset;
+	const Char *p;
+
+	info->buffer   = ct_encode_string(winfo->buffer, &el->el_lgcyconv);
+
+	offset = 0;
+	for (p = winfo->buffer; p < winfo->cursor; p++)
+		offset += ct_enc_width(*p);
+	info->cursor = info->buffer + offset;
+
+	offset = 0;
+	for (p = winfo->buffer; p < winfo->lastchar; p++)
+		offset += ct_enc_width(*p);
+	info->lastchar = info->buffer + offset;
+
+	return info;
+}
+
+
+int
+el_insertstr(EditLine *el, const char *str)
+{
+	return el_winsertstr(el, ct_decode_string(str, &el->el_lgcyconv));
+}
diff --git a/src/emacs.c b/src/emacs.c
new file mode 100644
index 0000000..ab1e2df
--- /dev/null
+++ b/src/emacs.c
@@ -0,0 +1,508 @@
+/*	$NetBSD: emacs.c,v 1.25 2011/07/29 15:16:33 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)emacs.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: emacs.c,v 1.25 2011/07/29 15:16:33 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * emacs.c: Emacs functions
+ */
+#include "el.h"
+
+/* em_delete_or_list():
+ *	Delete character under cursor or list completions if at end of line
+ *	[^D]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_delete_or_list(EditLine *el, Int c)
+{
+
+	if (el->el_line.cursor == el->el_line.lastchar) {
+					/* if I'm at the end */
+		if (el->el_line.cursor == el->el_line.buffer) {
+					/* and the beginning */
+			terminal_writec(el, c);	/* then do an EOF */
+			return CC_EOF;
+		} else {
+			/*
+			 * Here we could list completions, but it is an
+			 * error right now
+			 */
+			terminal_beep(el);
+			return CC_ERROR;
+		}
+	} else {
+		if (el->el_state.doingarg)
+			c_delafter(el, el->el_state.argument);
+		else
+			c_delafter1(el);
+		if (el->el_line.cursor > el->el_line.lastchar)
+			el->el_line.cursor = el->el_line.lastchar;
+				/* bounds check */
+		return CC_REFRESH;
+	}
+}
+
+
+/* em_delete_next_word():
+ *	Cut from cursor to end of current word
+ *	[M-d]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_delete_next_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *cp, *p, *kp;
+
+	if (el->el_line.cursor == el->el_line.lastchar)
+		return CC_ERROR;
+
+	cp = c__next_word(el->el_line.cursor, el->el_line.lastchar,
+	    el->el_state.argument, ce__isword);
+
+	for (p = el->el_line.cursor, kp = el->el_chared.c_kill.buf; p < cp; p++)
+				/* save the text */
+		*kp++ = *p;
+	el->el_chared.c_kill.last = kp;
+
+	c_delafter(el, (int)(cp - el->el_line.cursor));	/* delete after dot */
+	if (el->el_line.cursor > el->el_line.lastchar)
+		el->el_line.cursor = el->el_line.lastchar;
+				/* bounds check */
+	return CC_REFRESH;
+}
+
+
+/* em_yank():
+ *	Paste cut buffer at cursor position
+ *	[^Y]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_yank(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *kp, *cp;
+
+	if (el->el_chared.c_kill.last == el->el_chared.c_kill.buf)
+		return CC_NORM;
+
+	if (el->el_line.lastchar +
+	    (el->el_chared.c_kill.last - el->el_chared.c_kill.buf) >=
+	    el->el_line.limit)
+		return CC_ERROR;
+
+	el->el_chared.c_kill.mark = el->el_line.cursor;
+	cp = el->el_line.cursor;
+
+	/* open the space, */
+	c_insert(el,
+	    (int)(el->el_chared.c_kill.last - el->el_chared.c_kill.buf));
+	/* copy the chars */
+	for (kp = el->el_chared.c_kill.buf; kp < el->el_chared.c_kill.last; kp++)
+		*cp++ = *kp;
+
+	/* if an arg, cursor at beginning else cursor at end */
+	if (el->el_state.argument == 1)
+		el->el_line.cursor = cp;
+
+	return CC_REFRESH;
+}
+
+
+/* em_kill_line():
+ *	Cut the entire line and save in cut buffer
+ *	[^U]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_kill_line(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *kp, *cp;
+
+	cp = el->el_line.buffer;
+	kp = el->el_chared.c_kill.buf;
+	while (cp < el->el_line.lastchar)
+		*kp++ = *cp++;	/* copy it */
+	el->el_chared.c_kill.last = kp;
+				/* zap! -- delete all of it */
+	el->el_line.lastchar = el->el_line.buffer;
+	el->el_line.cursor = el->el_line.buffer;
+	return CC_REFRESH;
+}
+
+
+/* em_kill_region():
+ *	Cut area between mark and cursor and save in cut buffer
+ *	[^W]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_kill_region(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *kp, *cp;
+
+	if (!el->el_chared.c_kill.mark)
+		return CC_ERROR;
+
+	if (el->el_chared.c_kill.mark > el->el_line.cursor) {
+		cp = el->el_line.cursor;
+		kp = el->el_chared.c_kill.buf;
+		while (cp < el->el_chared.c_kill.mark)
+			*kp++ = *cp++;	/* copy it */
+		el->el_chared.c_kill.last = kp;
+		c_delafter(el, (int)(cp - el->el_line.cursor));
+	} else {		/* mark is before cursor */
+		cp = el->el_chared.c_kill.mark;
+		kp = el->el_chared.c_kill.buf;
+		while (cp < el->el_line.cursor)
+			*kp++ = *cp++;	/* copy it */
+		el->el_chared.c_kill.last = kp;
+		c_delbefore(el, (int)(cp - el->el_chared.c_kill.mark));
+		el->el_line.cursor = el->el_chared.c_kill.mark;
+	}
+	return CC_REFRESH;
+}
+
+
+/* em_copy_region():
+ *	Copy area between mark and cursor to cut buffer
+ *	[M-W]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_copy_region(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *kp, *cp;
+
+	if (!el->el_chared.c_kill.mark)
+		return CC_ERROR;
+
+	if (el->el_chared.c_kill.mark > el->el_line.cursor) {
+		cp = el->el_line.cursor;
+		kp = el->el_chared.c_kill.buf;
+		while (cp < el->el_chared.c_kill.mark)
+			*kp++ = *cp++;	/* copy it */
+		el->el_chared.c_kill.last = kp;
+	} else {
+		cp = el->el_chared.c_kill.mark;
+		kp = el->el_chared.c_kill.buf;
+		while (cp < el->el_line.cursor)
+			*kp++ = *cp++;	/* copy it */
+		el->el_chared.c_kill.last = kp;
+	}
+	return CC_NORM;
+}
+
+
+/* em_gosmacs_transpose():
+ *	Exchange the two characters before the cursor
+ *	Gosling emacs transpose chars [^T]
+ */
+protected el_action_t
+em_gosmacs_transpose(EditLine *el, Int c)
+{
+
+	if (el->el_line.cursor > &el->el_line.buffer[1]) {
+		/* must have at least two chars entered */
+		c = el->el_line.cursor[-2];
+		el->el_line.cursor[-2] = el->el_line.cursor[-1];
+		el->el_line.cursor[-1] = c;
+		return CC_REFRESH;
+	} else
+		return CC_ERROR;
+}
+
+
+/* em_next_word():
+ *	Move next to end of current word
+ *	[M-f]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_next_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+	if (el->el_line.cursor == el->el_line.lastchar)
+		return CC_ERROR;
+
+	el->el_line.cursor = c__next_word(el->el_line.cursor,
+	    el->el_line.lastchar,
+	    el->el_state.argument,
+	    ce__isword);
+
+	if (el->el_map.type == MAP_VI)
+		if (el->el_chared.c_vcmd.action != NOP) {
+			cv_delfini(el);
+			return CC_REFRESH;
+		}
+	return CC_CURSOR;
+}
+
+
+/* em_upper_case():
+ *	Uppercase the characters from cursor to end of current word
+ *	[M-u]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_upper_case(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *cp, *ep;
+
+	ep = c__next_word(el->el_line.cursor, el->el_line.lastchar,
+	    el->el_state.argument, ce__isword);
+
+	for (cp = el->el_line.cursor; cp < ep; cp++)
+		if (Islower(*cp))
+			*cp = Toupper(*cp);
+
+	el->el_line.cursor = ep;
+	if (el->el_line.cursor > el->el_line.lastchar)
+		el->el_line.cursor = el->el_line.lastchar;
+	return CC_REFRESH;
+}
+
+
+/* em_capitol_case():
+ *	Capitalize the characters from cursor to end of current word
+ *	[M-c]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_capitol_case(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *cp, *ep;
+
+	ep = c__next_word(el->el_line.cursor, el->el_line.lastchar,
+	    el->el_state.argument, ce__isword);
+
+	for (cp = el->el_line.cursor; cp < ep; cp++) {
+		if (Isalpha(*cp)) {
+			if (Islower(*cp))
+				*cp = Toupper(*cp);
+			cp++;
+			break;
+		}
+	}
+	for (; cp < ep; cp++)
+		if (Isupper(*cp))
+			*cp = Tolower(*cp);
+
+	el->el_line.cursor = ep;
+	if (el->el_line.cursor > el->el_line.lastchar)
+		el->el_line.cursor = el->el_line.lastchar;
+	return CC_REFRESH;
+}
+
+
+/* em_lower_case():
+ *	Lowercase the characters from cursor to end of current word
+ *	[M-l]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_lower_case(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *cp, *ep;
+
+	ep = c__next_word(el->el_line.cursor, el->el_line.lastchar,
+	    el->el_state.argument, ce__isword);
+
+	for (cp = el->el_line.cursor; cp < ep; cp++)
+		if (Isupper(*cp))
+			*cp = Tolower(*cp);
+
+	el->el_line.cursor = ep;
+	if (el->el_line.cursor > el->el_line.lastchar)
+		el->el_line.cursor = el->el_line.lastchar;
+	return CC_REFRESH;
+}
+
+
+/* em_set_mark():
+ *	Set the mark at cursor
+ *	[^@]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_set_mark(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_chared.c_kill.mark = el->el_line.cursor;
+	return CC_NORM;
+}
+
+
+/* em_exchange_mark():
+ *	Exchange the cursor and mark
+ *	[^X^X]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_exchange_mark(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *cp;
+
+	cp = el->el_line.cursor;
+	el->el_line.cursor = el->el_chared.c_kill.mark;
+	el->el_chared.c_kill.mark = cp;
+	return CC_CURSOR;
+}
+
+
+/* em_universal_argument():
+ *	Universal argument (argument times 4)
+ *	[^U]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_universal_argument(EditLine *el, Int c __attribute__((__unused__)))
+{				/* multiply current argument by 4 */
+
+	if (el->el_state.argument > 1000000)
+		return CC_ERROR;
+	el->el_state.doingarg = 1;
+	el->el_state.argument *= 4;
+	return CC_ARGHACK;
+}
+
+
+/* em_meta_next():
+ *	Add 8th bit to next character typed
+ *	[<ESC>]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_meta_next(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_state.metanext = 1;
+	return CC_ARGHACK;
+}
+
+
+/* em_toggle_overwrite():
+ *	Switch from insert to overwrite mode or vice versa
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_toggle_overwrite(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_state.inputmode = (el->el_state.inputmode == MODE_INSERT) ?
+	    MODE_REPLACE : MODE_INSERT;
+	return CC_NORM;
+}
+
+
+/* em_copy_prev_word():
+ *	Copy current word to cursor
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_copy_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *cp, *oldc, *dp;
+
+	if (el->el_line.cursor == el->el_line.buffer)
+		return CC_ERROR;
+
+	oldc = el->el_line.cursor;
+	/* does a bounds check */
+	cp = c__prev_word(el->el_line.cursor, el->el_line.buffer,
+	    el->el_state.argument, ce__isword);
+
+	c_insert(el, (int)(oldc - cp));
+	for (dp = oldc; cp < oldc && dp < el->el_line.lastchar; cp++)
+		*dp++ = *cp;
+
+	el->el_line.cursor = dp;/* put cursor at end */
+
+	return CC_REFRESH;
+}
+
+
+/* em_inc_search_next():
+ *	Emacs incremental next search
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_inc_search_next(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_search.patlen = 0;
+	return ce_inc_search(el, ED_SEARCH_NEXT_HISTORY);
+}
+
+
+/* em_inc_search_prev():
+ *	Emacs incremental reverse search
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_inc_search_prev(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_search.patlen = 0;
+	return ce_inc_search(el, ED_SEARCH_PREV_HISTORY);
+}
+
+
+/* em_delete_prev_char():
+ *	Delete the character to the left of the cursor
+ *	[^?]
+ */
+protected el_action_t
+/*ARGSUSED*/
+em_delete_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor <= el->el_line.buffer)
+		return CC_ERROR;
+
+	if (el->el_state.doingarg)
+		c_delbefore(el, el->el_state.argument);
+	else
+		c_delbefore1(el);
+	el->el_line.cursor -= el->el_state.argument;
+	if (el->el_line.cursor < el->el_line.buffer)
+		el->el_line.cursor = el->el_line.buffer;
+	return CC_REFRESH;
+}
diff --git a/src/fgetln.c b/src/fgetln.c
new file mode 100644
index 0000000..6c4f320
--- /dev/null
+++ b/src/fgetln.c
@@ -0,0 +1,107 @@
+/*	$NetBSD: fgetln.c,v 1.9 2008/04/29 06:53:03 martin Exp $	*/
+
+/*-
+ * Copyright (c) 1998 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Christos Zoulas.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifdef HAVE_NBTOOL_CONFIG_H
+#include "nbtool_config.h"
+#endif
+
+#if !HAVE_FGETLN
+#include "config.h"
+#include <stdlib.h>
+#ifndef HAVE_NBTOOL_CONFIG_H
+/* These headers are required, but included from nbtool_config.h */
+#include <stdio.h>
+#include <unistd.h>
+#include <errno.h>
+#include <string.h>
+#endif
+
+char *
+fgetln(FILE *fp, size_t *len)
+{
+	static char *buf = NULL;
+	static size_t bufsiz = 0;
+	char *ptr;
+
+
+	if (buf == NULL) {
+		bufsiz = BUFSIZ;
+		if ((buf = malloc(bufsiz)) == NULL)
+			return NULL;
+	}
+
+	if (fgets(buf, bufsiz, fp) == NULL)
+		return NULL;
+
+	*len = 0;
+	while ((ptr = strchr(&buf[*len], '\n')) == NULL) {
+		size_t nbufsiz = bufsiz + BUFSIZ;
+		char *nbuf = realloc(buf, nbufsiz);
+
+		if (nbuf == NULL) {
+			int oerrno = errno;
+			free(buf);
+			errno = oerrno;
+			buf = NULL;
+			return NULL;
+		} else
+			buf = nbuf;
+
+		if (fgets(&buf[bufsiz], BUFSIZ, fp) == NULL) {
+			buf[bufsiz] = '\0';
+			*len = strlen(buf);
+			return buf;
+		}
+
+		*len = bufsiz;
+		bufsiz = nbufsiz;
+	}
+
+	*len = (ptr - buf) + 1;
+	return buf;
+}
+
+#endif
+
+#ifdef TEST
+int
+main(int argc, char *argv[])
+{
+	char *p;
+	size_t len;
+
+	while ((p = fgetln(stdin, &len)) != NULL) {
+		(void)printf("%zu %s", len, p);
+		free(p);
+	}
+	return 0;
+}
+#endif
diff --git a/src/filecomplete.c b/src/filecomplete.c
new file mode 100644
index 0000000..49f8005
--- /dev/null
+++ b/src/filecomplete.c
@@ -0,0 +1,576 @@
+/*	$NetBSD: filecomplete.c,v 1.31 2011/09/16 16:13:16 plunky Exp $	*/
+
+/*-
+ * Copyright (c) 1997 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jaromir Dolecek.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "config.h"
+
+#if !defined(lint) && !defined(SCCSID)
+__RCSID("$NetBSD: filecomplete.c,v 1.31 2011/09/16 16:13:16 plunky Exp $");
+#endif /* not lint && not SCCSID */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <stdio.h>
+#include <dirent.h>
+#include <string.h>
+#include <pwd.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <limits.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <vis.h>
+
+#include "el.h"
+#include "fcns.h"		/* for EL_NUM_FCNS */
+#include "histedit.h"
+#include "filecomplete.h"
+
+static const Char break_chars[] = { ' ', '\t', '\n', '"', '\\', '\'', '`', '@',
+    '$', '>', '<', '=', ';', '|', '&', '{', '(', '\0' };
+
+
+/********************************/
+/* completion functions */
+
+/*
+ * does tilde expansion of strings of type ``~user/foo''
+ * if ``user'' isn't valid user name or ``txt'' doesn't start
+ * w/ '~', returns pointer to strdup()ed copy of ``txt''
+ *
+ * it's callers's responsibility to free() returned string
+ */
+char *
+fn_tilde_expand(const char *txt)
+{
+#if defined(HAVE_GETPW_R_POSIX) || defined(HAVE_GETPW_R_DRAFT)
+	struct passwd pwres;
+	char pwbuf[1024];
+#endif
+	struct passwd *pass;
+	char *temp;
+	size_t len = 0;
+
+	if (txt[0] != '~')
+		return strdup(txt);
+
+	temp = strchr(txt + 1, '/');
+	if (temp == NULL) {
+		temp = strdup(txt + 1);
+		if (temp == NULL)
+			return NULL;
+	} else {
+		/* text until string after slash */
+		len = (size_t)(temp - txt + 1);
+		temp = el_malloc(len * sizeof(*temp));
+		if (temp == NULL)
+			return NULL;
+		(void)strncpy(temp, txt + 1, len - 2);
+		temp[len - 2] = '\0';
+	}
+	if (temp[0] == 0) {
+#ifdef HAVE_GETPW_R_POSIX
+ 		if (getpwuid_r(getuid(), &pwres, pwbuf, sizeof(pwbuf),
+		    &pass) != 0)
+ 			pass = NULL;
+#elif HAVE_GETPW_R_DRAFT
+		pass = getpwuid_r(getuid(), &pwres, pwbuf, sizeof(pwbuf));
+#else
+		pass = getpwuid(getuid());
+#endif
+	} else {
+#ifdef HAVE_GETPW_R_POSIX
+		if (getpwnam_r(temp, &pwres, pwbuf, sizeof(pwbuf), &pass) != 0)
+			pass = NULL;
+#elif HAVE_GETPW_R_DRAFT
+		pass = getpwnam_r(temp, &pwres, pwbuf, sizeof(pwbuf));
+#else
+		pass = getpwnam(temp);
+#endif
+	}
+	el_free(temp);		/* value no more needed */
+	if (pass == NULL)
+		return strdup(txt);
+
+	/* update pointer txt to point at string immedially following */
+	/* first slash */
+	txt += len;
+
+	len = strlen(pass->pw_dir) + 1 + strlen(txt) + 1;
+	temp = el_malloc(len * sizeof(*temp));
+	if (temp == NULL)
+		return NULL;
+	(void)snprintf(temp, len, "%s/%s", pass->pw_dir, txt);
+
+	return temp;
+}
+
+
+/*
+ * return first found file name starting by the ``text'' or NULL if no
+ * such file can be found
+ * value of ``state'' is ignored
+ *
+ * it's caller's responsibility to free returned string
+ */
+char *
+fn_filename_completion_function(const char *text, int state)
+{
+	static DIR *dir = NULL;
+	static char *filename = NULL, *dirname = NULL, *dirpath = NULL;
+	static size_t filename_len = 0;
+	struct dirent *entry;
+	char *temp;
+	size_t len;
+
+	if (state == 0 || dir == NULL) {
+		temp = strrchr(text, '/');
+		if (temp) {
+			char *nptr;
+			temp++;
+			nptr = el_realloc(filename, (strlen(temp) + 1) *
+			    sizeof(*nptr));
+			if (nptr == NULL) {
+				el_free(filename);
+				filename = NULL;
+				return NULL;
+			}
+			filename = nptr;
+			(void)strcpy(filename, temp);
+			len = (size_t)(temp - text);	/* including last slash */
+
+			nptr = el_realloc(dirname, (len + 1) *
+			    sizeof(*nptr));
+			if (nptr == NULL) {
+				el_free(dirname);
+				dirname = NULL;
+				return NULL;
+			}
+			dirname = nptr;
+			(void)strncpy(dirname, text, len);
+			dirname[len] = '\0';
+		} else {
+			el_free(filename);
+			if (*text == 0)
+				filename = NULL;
+			else {
+				filename = strdup(text);
+				if (filename == NULL)
+					return NULL;
+			}
+			el_free(dirname);
+			dirname = NULL;
+		}
+
+		if (dir != NULL) {
+			(void)closedir(dir);
+			dir = NULL;
+		}
+
+		/* support for ``~user'' syntax */
+
+		el_free(dirpath);
+		dirpath = NULL;
+		if (dirname == NULL) {
+			if ((dirname = strdup("")) == NULL)
+				return NULL;
+			dirpath = strdup("./");
+		} else if (*dirname == '~')
+			dirpath = fn_tilde_expand(dirname);
+		else
+			dirpath = strdup(dirname);
+
+		if (dirpath == NULL)
+			return NULL;
+
+		dir = opendir(dirpath);
+		if (!dir)
+			return NULL;	/* cannot open the directory */
+
+		/* will be used in cycle */
+		filename_len = filename ? strlen(filename) : 0;
+	}
+
+	/* find the match */
+	while ((entry = readdir(dir)) != NULL) {
+		/* skip . and .. */
+		if (entry->d_name[0] == '.' && (!entry->d_name[1]
+		    || (entry->d_name[1] == '.' && !entry->d_name[2])))
+			continue;
+		if (filename_len == 0)
+			break;
+		/* otherwise, get first entry where first */
+		/* filename_len characters are equal	  */
+		if (entry->d_name[0] == filename[0]
+          /* Some dirents have d_namlen, but it is not portable. */
+		    && strlen(entry->d_name) >= filename_len
+		    && strncmp(entry->d_name, filename,
+			filename_len) == 0)
+			break;
+	}
+
+	if (entry) {		/* match found */
+
+       /* Some dirents have d_namlen, but it is not portable. */
+		len = strlen(entry->d_name);
+
+		len = strlen(dirname) + len + 1;
+		temp = el_malloc(len * sizeof(*temp));
+		if (temp == NULL)
+			return NULL;
+		(void)snprintf(temp, len, "%s%s", dirname, entry->d_name);
+	} else {
+		(void)closedir(dir);
+		dir = NULL;
+		temp = NULL;
+	}
+
+	return temp;
+}
+
+
+static const char *
+append_char_function(const char *name)
+{
+	struct stat stbuf;
+	char *expname = *name == '~' ? fn_tilde_expand(name) : NULL;
+	const char *rs = " ";
+
+	if (stat(expname ? expname : name, &stbuf) == -1)
+		goto out;
+	if (S_ISDIR(stbuf.st_mode))
+		rs = "/";
+out:
+	if (expname)
+		el_free(expname);
+	return rs;
+}
+/*
+ * returns list of completions for text given
+ * non-static for readline.
+ */
+char ** completion_matches(const char *, char *(*)(const char *, int));
+char **
+completion_matches(const char *text, char *(*genfunc)(const char *, int))
+{
+	char **match_list = NULL, *retstr, *prevstr;
+	size_t match_list_len, max_equal, which, i;
+	size_t matches;
+
+	matches = 0;
+	match_list_len = 1;
+	while ((retstr = (*genfunc) (text, (int)matches)) != NULL) {
+		/* allow for list terminator here */
+		if (matches + 3 >= match_list_len) {
+			char **nmatch_list;
+			while (matches + 3 >= match_list_len)
+				match_list_len <<= 1;
+			nmatch_list = el_realloc(match_list,
+			    match_list_len * sizeof(*nmatch_list));
+			if (nmatch_list == NULL) {
+				el_free(match_list);
+				return NULL;
+			}
+			match_list = nmatch_list;
+
+		}
+		match_list[++matches] = retstr;
+	}
+
+	if (!match_list)
+		return NULL;	/* nothing found */
+
+	/* find least denominator and insert it to match_list[0] */
+	which = 2;
+	prevstr = match_list[1];
+	max_equal = strlen(prevstr);
+	for (; which <= matches; which++) {
+		for (i = 0; i < max_equal &&
+		    prevstr[i] == match_list[which][i]; i++)
+			continue;
+		max_equal = i;
+	}
+
+	retstr = el_malloc((max_equal + 1) * sizeof(*retstr));
+	if (retstr == NULL) {
+		el_free(match_list);
+		return NULL;
+	}
+	(void)strncpy(retstr, match_list[1], max_equal);
+	retstr[max_equal] = '\0';
+	match_list[0] = retstr;
+
+	/* add NULL as last pointer to the array */
+	match_list[matches + 1] = NULL;
+
+	return match_list;
+}
+
+/*
+ * Sort function for qsort(). Just wrapper around strcasecmp().
+ */
+static int
+_fn_qsort_string_compare(const void *i1, const void *i2)
+{
+	const char *s1 = ((const char * const *)i1)[0];
+	const char *s2 = ((const char * const *)i2)[0];
+
+	return strcasecmp(s1, s2);
+}
+
+/*
+ * Display list of strings in columnar format on readline's output stream.
+ * 'matches' is list of strings, 'num' is number of strings in 'matches',
+ * 'width' is maximum length of string in 'matches'.
+ *
+ * matches[0] is not one of the match strings, but it is counted in
+ * num, so the strings are matches[1] *through* matches[num-1].
+ */
+void
+fn_display_match_list (EditLine *el, char **matches, size_t num, size_t width)
+{
+	size_t line, lines, col, cols, thisguy;
+	int screenwidth = el->el_terminal.t_size.h;
+
+	/* Ignore matches[0]. Avoid 1-based array logic below. */
+	matches++;
+	num--;
+
+	/*
+	 * Find out how many entries can be put on one line; count
+	 * with one space between strings the same way it's printed.
+	 */
+	cols = (size_t)screenwidth / (width + 1);
+	if (cols == 0)
+		cols = 1;
+
+	/* how many lines of output, rounded up */
+	lines = (num + cols - 1) / cols;
+
+	/* Sort the items. */
+	qsort(matches, num, sizeof(char *), _fn_qsort_string_compare);
+
+	/*
+	 * On the ith line print elements i, i+lines, i+lines*2, etc.
+	 */
+	for (line = 0; line < lines; line++) {
+		for (col = 0; col < cols; col++) {
+			thisguy = line + col * lines;
+			if (thisguy >= num)
+				break;
+			(void)fprintf(el->el_outfile, "%s%-*s",
+			    col == 0 ? "" : " ", (int)width, matches[thisguy]);
+		}
+		(void)fprintf(el->el_outfile, "\n");
+	}
+}
+
+/*
+ * Complete the word at or before point,
+ * 'what_to_do' says what to do with the completion.
+ * \t   means do standard completion.
+ * `?' means list the possible completions.
+ * `*' means insert all of the possible completions.
+ * `!' means to do standard completion, and list all possible completions if
+ * there is more than one.
+ *
+ * Note: '*' support is not implemented
+ *       '!' could never be invoked
+ */
+int
+fn_complete(EditLine *el,
+	char *(*complet_func)(const char *, int),
+	char **(*attempted_completion_function)(const char *, int, int),
+	const Char *word_break, const Char *special_prefixes,
+	const char *(*app_func)(const char *), size_t query_items,
+	int *completion_type, int *over, int *point, int *end)
+{
+	const TYPE(LineInfo) *li;
+	Char *temp;
+        char **matches;
+	const Char *ctemp;
+	size_t len;
+	int what_to_do = '\t';
+	int retval = CC_NORM;
+
+	if (el->el_state.lastcmd == el->el_state.thiscmd)
+		what_to_do = '?';
+
+	/* readline's rl_complete() has to be told what we did... */
+	if (completion_type != NULL)
+		*completion_type = what_to_do;
+
+	if (!complet_func)
+		complet_func = fn_filename_completion_function;
+	if (!app_func)
+		app_func = append_char_function;
+
+	/* We now look backwards for the start of a filename/variable word */
+	li = FUN(el,line)(el);
+	ctemp = li->cursor;
+	while (ctemp > li->buffer
+	    && !Strchr(word_break, ctemp[-1])
+	    && (!special_prefixes || !Strchr(special_prefixes, ctemp[-1]) ) )
+		ctemp--;
+
+	len = (size_t)(li->cursor - ctemp);
+	temp = el_malloc((len + 1) * sizeof(*temp));
+	(void)Strncpy(temp, ctemp, len);
+	temp[len] = '\0';
+
+	/* these can be used by function called in completion_matches() */
+	/* or (*attempted_completion_function)() */
+	if (point != 0)
+		*point = (int)(li->cursor - li->buffer);
+	if (end != NULL)
+		*end = (int)(li->lastchar - li->buffer);
+
+	if (attempted_completion_function) {
+		int cur_off = (int)(li->cursor - li->buffer);
+		matches = (*attempted_completion_function)(
+		    ct_encode_string(temp, &el->el_scratch),
+		    cur_off - (int)len, cur_off);
+	} else
+		matches = 0;
+	if (!attempted_completion_function || 
+	    (over != NULL && !*over && !matches))
+		matches = completion_matches(
+		    ct_encode_string(temp, &el->el_scratch), complet_func);
+
+	if (over != NULL)
+		*over = 0;
+
+	if (matches) {
+		int i;
+		size_t matches_num, maxlen, match_len, match_display=1;
+
+		retval = CC_REFRESH;
+		/*
+		 * Only replace the completed string with common part of
+		 * possible matches if there is possible completion.
+		 */
+		if (matches[0][0] != '\0') {
+			el_deletestr(el, (int) len);
+			FUN(el,insertstr)(el,
+			    ct_decode_string(matches[0], &el->el_scratch));
+		}
+
+		if (what_to_do == '?')
+			goto display_matches;
+
+		if (matches[2] == NULL && strcmp(matches[0], matches[1]) == 0) {
+			/*
+			 * We found exact match. Add a space after
+			 * it, unless we do filename completion and the
+			 * object is a directory.
+			 */
+			FUN(el,insertstr)(el,
+			    ct_decode_string((*app_func)(matches[0]),
+			    &el->el_scratch));
+		} else if (what_to_do == '!') {
+    display_matches:
+			/*
+			 * More than one match and requested to list possible
+			 * matches.
+			 */
+
+			for(i = 1, maxlen = 0; matches[i]; i++) {
+				match_len = strlen(matches[i]);
+				if (match_len > maxlen)
+					maxlen = match_len;
+			}
+			/* matches[1] through matches[i-1] are available */
+			matches_num = (size_t)(i - 1);
+				
+			/* newline to get on next line from command line */
+			(void)fprintf(el->el_outfile, "\n");
+
+			/*
+			 * If there are too many items, ask user for display
+			 * confirmation.
+			 */
+			if (matches_num > query_items) {
+				(void)fprintf(el->el_outfile,
+				    "Display all %zu possibilities? (y or n) ",
+				    matches_num);
+				(void)fflush(el->el_outfile);
+				if (getc(stdin) != 'y')
+					match_display = 0;
+				(void)fprintf(el->el_outfile, "\n");
+			}
+
+			if (match_display) {
+				/*
+				 * Interface of this function requires the
+				 * strings be matches[1..num-1] for compat.
+				 * We have matches_num strings not counting
+				 * the prefix in matches[0], so we need to
+				 * add 1 to matches_num for the call.
+				 */
+				fn_display_match_list(el, matches,
+				    matches_num+1, maxlen);
+			}
+			retval = CC_REDISPLAY;
+		} else if (matches[0][0]) {
+			/*
+			 * There was some common match, but the name was
+			 * not complete enough. Next tab will print possible
+			 * completions.
+			 */
+			el_beep(el);
+		} else {
+			/* lcd is not a valid object - further specification */
+			/* is needed */
+			el_beep(el);
+			retval = CC_NORM;
+		}
+
+		/* free elements of array and the array itself */
+		for (i = 0; matches[i]; i++)
+			el_free(matches[i]);
+		el_free(matches);
+		matches = NULL;
+	}
+	el_free(temp);
+	return retval;
+}
+
+/*
+ * el-compatible wrapper around rl_complete; needed for key binding
+ */
+/* ARGSUSED */
+unsigned char
+_el_fn_complete(EditLine *el, int ch __attribute__((__unused__)))
+{
+	return (unsigned char)fn_complete(el, NULL, NULL,
+	    break_chars, NULL, NULL, (size_t)100,
+	    NULL, NULL, NULL, NULL);
+}
diff --git a/src/filecomplete.h b/src/filecomplete.h
new file mode 100644
index 0000000..971e6e0
--- /dev/null
+++ b/src/filecomplete.h
@@ -0,0 +1,44 @@
+/*	$NetBSD: filecomplete.h,v 1.9 2009/12/30 22:37:40 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1997 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jaromir Dolecek.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FILECOMPLETE_H_
+#define _FILECOMPLETE_H_
+
+int fn_complete(EditLine *,
+    char *(*)(const char *, int),
+    char **(*)(const char *, int, int),
+    const Char *, const Char *, const char *(*)(const char *), size_t,
+    int *, int *, int *, int *);
+
+void fn_display_match_list(EditLine *, char **, size_t, size_t);
+char *fn_tilde_expand(const char *);
+char *fn_filename_completion_function(const char *, int);
+
+#endif
diff --git a/src/hist.c b/src/hist.c
new file mode 100644
index 0000000..77dbaab
--- /dev/null
+++ b/src/hist.c
@@ -0,0 +1,223 @@
+/*	$NetBSD: hist.c,v 1.20 2011/07/29 15:16:33 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)hist.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: hist.c,v 1.20 2011/07/29 15:16:33 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * hist.c: History access functions
+ */
+#include <stdlib.h>
+#include "el.h"
+
+/* hist_init():
+ *	Initialization function.
+ */
+protected int
+hist_init(EditLine *el)
+{
+
+	el->el_history.fun = NULL;
+	el->el_history.ref = NULL;
+	el->el_history.buf = el_malloc(EL_BUFSIZ * sizeof(*el->el_history.buf));
+	el->el_history.sz  = EL_BUFSIZ;
+	if (el->el_history.buf == NULL)
+		return -1;
+	el->el_history.last = el->el_history.buf;
+	return 0;
+}
+
+
+/* hist_end():
+ *	clean up history;
+ */
+protected void
+hist_end(EditLine *el)
+{
+
+	el_free(el->el_history.buf);
+	el->el_history.buf = NULL;
+}
+
+
+/* hist_set():
+ *	Set new history interface
+ */
+protected int
+hist_set(EditLine *el, hist_fun_t fun, void *ptr)
+{
+
+	el->el_history.ref = ptr;
+	el->el_history.fun = fun;
+	return 0;
+}
+
+
+/* hist_get():
+ *	Get a history line and update it in the buffer.
+ *	eventno tells us the event to get.
+ */
+protected el_action_t
+hist_get(EditLine *el)
+{
+	const Char *hp;
+	int h;
+
+	if (el->el_history.eventno == 0) {	/* if really the current line */
+		(void) Strncpy(el->el_line.buffer, el->el_history.buf,
+		    el->el_history.sz);
+		el->el_line.lastchar = el->el_line.buffer +
+		    (el->el_history.last - el->el_history.buf);
+
+#ifdef KSHVI
+		if (el->el_map.type == MAP_VI)
+			el->el_line.cursor = el->el_line.buffer;
+		else
+#endif /* KSHVI */
+			el->el_line.cursor = el->el_line.lastchar;
+
+		return CC_REFRESH;
+	}
+	if (el->el_history.ref == NULL)
+		return CC_ERROR;
+
+	hp = HIST_FIRST(el);
+
+	if (hp == NULL)
+		return CC_ERROR;
+
+	for (h = 1; h < el->el_history.eventno; h++)
+		if ((hp = HIST_NEXT(el)) == NULL) {
+			el->el_history.eventno = h;
+			return CC_ERROR;
+		}
+	(void) Strncpy(el->el_line.buffer, hp,
+			(size_t)(el->el_line.limit - el->el_line.buffer));
+	el->el_line.buffer[el->el_line.limit - el->el_line.buffer - 1] = '\0';
+	el->el_line.lastchar = el->el_line.buffer + Strlen(el->el_line.buffer);
+
+	if (el->el_line.lastchar > el->el_line.buffer
+	    && el->el_line.lastchar[-1] == '\n')
+		el->el_line.lastchar--;
+	if (el->el_line.lastchar > el->el_line.buffer
+	    && el->el_line.lastchar[-1] == ' ')
+		el->el_line.lastchar--;
+#ifdef KSHVI
+	if (el->el_map.type == MAP_VI)
+		el->el_line.cursor = el->el_line.buffer;
+	else
+#endif /* KSHVI */
+		el->el_line.cursor = el->el_line.lastchar;
+
+	return CC_REFRESH;
+}
+
+
+/* hist_command()
+ *	process a history command
+ */
+protected int
+hist_command(EditLine *el, int argc, const Char **argv)
+{
+	const Char *str;
+	int num;
+	TYPE(HistEvent) ev;
+
+	if (el->el_history.ref == NULL)
+		return -1;
+
+	if (argc == 1 || Strcmp(argv[1], STR("list")) == 0) {
+		 /* List history entries */
+
+		for (str = HIST_LAST(el); str != NULL; str = HIST_PREV(el))
+			(void) fprintf(el->el_outfile, "%d %s",
+			    el->el_history.ev.num, ct_encode_string(str, &el->el_scratch));
+		return 0;
+	}
+
+	if (argc != 3)
+		return -1;
+
+	num = (int)Strtol(argv[2], NULL, 0);
+
+	if (Strcmp(argv[1], STR("size")) == 0)
+		return FUNW(history)(el->el_history.ref, &ev, H_SETSIZE, num);
+
+	if (Strcmp(argv[1], STR("unique")) == 0)
+		return FUNW(history)(el->el_history.ref, &ev, H_SETUNIQUE, num);
+
+	return -1;
+}
+
+/* hist_enlargebuf()
+ *	Enlarge history buffer to specified value. Called from el_enlargebufs().
+ *	Return 0 for failure, 1 for success.
+ */
+protected int
+/*ARGSUSED*/
+hist_enlargebuf(EditLine *el, size_t oldsz, size_t newsz)
+{
+	Char *newbuf;
+
+	newbuf = el_realloc(el->el_history.buf, newsz * sizeof(*newbuf));
+	if (!newbuf)
+		return 0;
+
+	(void) memset(&newbuf[oldsz], '\0', (newsz - oldsz) * sizeof(*newbuf));
+
+	el->el_history.last = newbuf +
+				(el->el_history.last - el->el_history.buf);
+	el->el_history.buf = newbuf;
+	el->el_history.sz  = newsz;
+
+	return 1;
+}
+
+#ifdef WIDECHAR
+protected wchar_t *
+hist_convert(EditLine *el, int fn, void *arg)
+{
+	HistEventW ev;
+	if ((*(el)->el_history.fun)((el)->el_history.ref, &ev, fn, arg) == -1)
+		return NULL;
+	return ct_decode_string((const char *)(const void *)ev.str,
+	    &el->el_scratch);
+}
+#endif
diff --git a/src/hist.h b/src/hist.h
new file mode 100644
index 0000000..a63be49
--- /dev/null
+++ b/src/hist.h
@@ -0,0 +1,87 @@
+/*	$NetBSD: hist.h,v 1.13 2011/07/28 20:50:55 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)hist.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.hist.c: History functions
+ */
+#ifndef _h_el_hist
+#define	_h_el_hist
+
+#include "histedit.h"
+
+typedef int (*hist_fun_t)(void *, TYPE(HistEvent) *, int, ...);
+
+typedef struct el_history_t {
+	Char		*buf;		/* The history buffer		*/
+	size_t		sz;		/* Size of history buffer	*/
+	Char		*last;		/* The last character		*/
+	int		 eventno;	/* Event we are looking for	*/
+	void *		 ref;		/* Argument for history fcns	*/
+	hist_fun_t	 fun;		/* Event access			*/
+	TYPE(HistEvent)	 ev;		/* Event cookie			*/
+} el_history_t;
+
+#define	HIST_FUN_INTERNAL(el, fn, arg)	\
+    ((((*(el)->el_history.fun) ((el)->el_history.ref, &(el)->el_history.ev, \
+	fn, arg)) == -1) ? NULL : (el)->el_history.ev.str)
+#ifdef WIDECHAR
+#define HIST_FUN(el, fn, arg) \
+    (((el)->el_flags & NARROW_HISTORY) ? hist_convert(el, fn, arg) : \
+	HIST_FUN_INTERNAL(el, fn, arg))
+#else
+#define HIST_FUN(el, fn, arg) HIST_FUN_INTERNAL(el, fn, arg)
+#endif
+
+
+#define	HIST_NEXT(el)		HIST_FUN(el, H_NEXT, NULL)
+#define	HIST_FIRST(el)		HIST_FUN(el, H_FIRST, NULL)
+#define	HIST_LAST(el)		HIST_FUN(el, H_LAST, NULL)
+#define	HIST_PREV(el)		HIST_FUN(el, H_PREV, NULL)
+#define	HIST_SET(el, num)	HIST_FUN(el, H_SET, num)
+#define	HIST_LOAD(el, fname)	HIST_FUN(el, H_LOAD fname)
+#define	HIST_SAVE(el, fname)	HIST_FUN(el, H_SAVE fname)
+
+protected int		hist_init(EditLine *);
+protected void		hist_end(EditLine *);
+protected el_action_t	hist_get(EditLine *);
+protected int		hist_set(EditLine *, hist_fun_t, void *);
+protected int		hist_command(EditLine *, int, const Char **);
+protected int		hist_enlargebuf(EditLine *, size_t, size_t);
+#ifdef WIDECHAR
+protected wchar_t 	*hist_convert(EditLine *, int, void *);
+#endif
+
+#endif /* _h_el_hist */
diff --git a/src/histedit.h b/src/histedit.h
new file mode 100644
index 0000000..73e8375
--- /dev/null
+++ b/src/histedit.h
@@ -0,0 +1,320 @@
+/*	$NetBSD: histedit.h,v 1.51 2013/07/12 17:48:29 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)histedit.h	8.2 (Berkeley) 1/3/94
+ */
+
+/*
+ * histedit.h: Line editor and history interface.
+ */
+#ifndef _HISTEDIT_H_
+#define	_HISTEDIT_H_
+
+#define	LIBEDIT_MAJOR 2
+#define	LIBEDIT_MINOR 11
+
+#include <sys/types.h>
+#include <stdio.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * ==== Editing ====
+ */
+
+typedef struct editline EditLine;
+
+/*
+ * For user-defined function interface
+ */
+typedef struct lineinfo {
+	const char	*buffer;
+	const char	*cursor;
+	const char	*lastchar;
+} LineInfo;
+
+/*
+ * EditLine editor function return codes.
+ * For user-defined function interface
+ */
+#define	CC_NORM		0
+#define	CC_NEWLINE	1
+#define	CC_EOF		2
+#define	CC_ARGHACK	3
+#define	CC_REFRESH	4
+#define	CC_CURSOR	5
+#define	CC_ERROR	6
+#define	CC_FATAL	7
+#define	CC_REDISPLAY	8
+#define	CC_REFRESH_BEEP	9
+
+/*
+ * Initialization, cleanup, and resetting
+ */
+EditLine	*el_init(const char *, FILE *, FILE *, FILE *);
+EditLine	*el_init_fd(const char *, FILE *, FILE *, FILE *,
+    int, int, int);
+void		 el_end(EditLine *);
+void		 el_reset(EditLine *);
+
+/*
+ * Get a line, a character or push a string back in the input queue
+ */
+const char	*el_gets(EditLine *, int *);
+int		 el_getc(EditLine *, char *);
+void		 el_push(EditLine *, const char *);
+
+/*
+ * Beep!
+ */
+void		 el_beep(EditLine *);
+
+/*
+ * High level function internals control
+ * Parses argc, argv array and executes builtin editline commands
+ */
+int		 el_parse(EditLine *, int, const char **);
+
+/*
+ * Low level editline access functions
+ */
+int		 el_set(EditLine *, int, ...);
+int		 el_get(EditLine *, int, ...);
+unsigned char	_el_fn_complete(EditLine *, int);
+
+/*
+ * el_set/el_get parameters
+ *
+ * When using el_wset/el_wget (as opposed to el_set/el_get):
+ *   Char is wchar_t, otherwise it is char.
+ *   prompt_func is el_wpfunc_t, otherwise it is el_pfunc_t .
+
+ * Prompt function prototypes are:
+ *   typedef char    *(*el_pfunct_t)  (EditLine *);
+ *   typedef wchar_t *(*el_wpfunct_t) (EditLine *);
+ *
+ * For operations that support set or set/get, the argument types listed are for
+ * the "set" operation. For "get", each listed type must be a pointer.
+ * E.g. EL_EDITMODE takes an int when set, but an int* when get.
+ * 
+ * Operations that only support "get" have the correct argument types listed.
+ */
+#define	EL_PROMPT	0	/* , prompt_func);		      set/get */
+#define	EL_TERMINAL	1	/* , const char *);		      set/get */
+#define	EL_EDITOR	2	/* , const Char *);		      set/get */
+#define	EL_SIGNAL	3	/* , int);			      set/get */
+#define	EL_BIND		4	/* , const Char *, ..., NULL);	      set     */
+#define	EL_TELLTC	5	/* , const Char *, ..., NULL);	      set     */
+#define	EL_SETTC	6	/* , const Char *, ..., NULL);	      set     */
+#define	EL_ECHOTC	7	/* , const Char *, ..., NULL);        set     */
+#define	EL_SETTY	8	/* , const Char *, ..., NULL);        set     */
+#define	EL_ADDFN	9	/* , const Char *, const Char,        set     */
+				/*   el_func_t);		 	      */
+#define	EL_HIST		10	/* , hist_fun_t, const void *);	      set     */
+#define	EL_EDITMODE	11	/* , int);			      set/get */
+#define	EL_RPROMPT	12	/* , prompt_func);		      set/get */
+#define	EL_GETCFN	13	/* , el_rfunc_t);		      set/get */
+#define	EL_CLIENTDATA	14	/* , void *);			      set/get */
+#define	EL_UNBUFFERED	15	/* , int);			      set/get */
+#define	EL_PREP_TERM	16	/* , int);			      set     */
+#define	EL_GETTC	17	/* , const Char *, ..., NULL);		  get */
+#define	EL_GETFP	18	/* , int, FILE **);		          get */
+#define	EL_SETFP	19	/* , int, FILE *);		      set     */
+#define	EL_REFRESH	20	/* , void);			      set     */
+#define	EL_PROMPT_ESC	21	/* , prompt_func, Char);	      set/get */
+#define	EL_RPROMPT_ESC	22	/* , prompt_func, Char);	      set/get */
+#define	EL_RESIZE	23	/* , el_zfunc_t, void *);	      set     */
+
+#define	EL_BUILTIN_GETCFN	(NULL)
+
+/*
+ * Source named file or $PWD/.editrc or $HOME/.editrc
+ */
+int		el_source(EditLine *, const char *);
+
+/*
+ * Must be called when the terminal changes size; If EL_SIGNAL
+ * is set this is done automatically otherwise it is the responsibility
+ * of the application
+ */
+void		 el_resize(EditLine *);
+
+/*
+ * User-defined function interface.
+ */
+const LineInfo	*el_line(EditLine *);
+int		 el_insertstr(EditLine *, const char *);
+void		 el_deletestr(EditLine *, int);
+
+
+/*
+ * ==== History ====
+ */
+
+typedef struct history History;
+
+typedef struct HistEvent {
+	int		 num;
+	const char	*str;
+} HistEvent;
+
+/*
+ * History access functions.
+ */
+History *	history_init(void);
+void		history_end(History *);
+
+int		history(History *, HistEvent *, int, ...);
+
+#define	H_FUNC		 0	/* , UTSL		*/
+#define	H_SETSIZE	 1	/* , const int);	*/
+#define	H_GETSIZE	 2	/* , void);		*/
+#define	H_FIRST		 3	/* , void);		*/
+#define	H_LAST		 4	/* , void);		*/
+#define	H_PREV		 5	/* , void);		*/
+#define	H_NEXT		 6	/* , void);		*/
+#define	H_CURR		 8	/* , const int);	*/
+#define	H_SET		 7	/* , int);		*/
+#define	H_ADD		 9	/* , const wchar_t *);	*/
+#define	H_ENTER		10	/* , const wchar_t *);	*/
+#define	H_APPEND	11	/* , const wchar_t *);	*/
+#define	H_END		12	/* , void);		*/
+#define	H_NEXT_STR	13	/* , const wchar_t *);	*/
+#define	H_PREV_STR	14	/* , const wchar_t *);	*/
+#define	H_NEXT_EVENT	15	/* , const int);	*/
+#define	H_PREV_EVENT	16	/* , const int);	*/
+#define	H_LOAD		17	/* , const char *);	*/
+#define	H_SAVE		18	/* , const char *);	*/
+#define	H_CLEAR		19	/* , void);		*/
+#define	H_SETUNIQUE	20	/* , int);		*/
+#define	H_GETUNIQUE	21	/* , void);		*/
+#define	H_DEL		22	/* , int);		*/
+#define	H_NEXT_EVDATA	23	/* , const int, histdata_t *);	*/
+#define	H_DELDATA	24	/* , int, histdata_t *);*/
+#define	H_REPLACE	25	/* , const char *, histdata_t);	*/
+
+
+
+/*
+ * ==== Tokenization ====
+ */
+
+typedef struct tokenizer Tokenizer;
+
+/*
+ * String tokenization functions, using simplified sh(1) quoting rules
+ */
+Tokenizer	*tok_init(const char *);
+void		 tok_end(Tokenizer *);
+void		 tok_reset(Tokenizer *);
+int		 tok_line(Tokenizer *, const LineInfo *,
+		    int *, const char ***, int *, int *);
+int		 tok_str(Tokenizer *, const char *,
+		    int *, const char ***);
+
+/*
+ * Begin Wide Character Support
+ */
+#ifdef __linux__
+/* Apparently we need _GNU_SOURCE defined to get access to wcsdup on Linux */
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
+#endif
+
+#include <wchar.h>
+#include <wctype.h>
+
+/*
+ * Wide character versions
+ */
+
+/*
+ * ==== Editing ====
+ */
+typedef struct lineinfow {
+	const wchar_t	*buffer;
+	const wchar_t	*cursor;
+	const wchar_t	*lastchar;
+} LineInfoW;
+
+const wchar_t	*el_wgets(EditLine *, int *);
+int		 el_wgetc(EditLine *, wchar_t *);
+void		 el_wpush(EditLine *, const wchar_t *);
+
+int		 el_wparse(EditLine *, int, const wchar_t **);
+
+int		 el_wset(EditLine *, int, ...);
+int		 el_wget(EditLine *, int, ...);
+
+int		 el_cursor(EditLine *, int);
+const LineInfoW	*el_wline(EditLine *);
+int		 el_winsertstr(EditLine *, const wchar_t *);
+#define          el_wdeletestr  el_deletestr
+
+/*
+ * ==== History ====
+ */
+typedef struct histeventW {
+	int		 num;
+	const wchar_t	*str;
+} HistEventW;
+
+typedef struct historyW HistoryW;
+
+HistoryW *	history_winit(void);
+void		history_wend(HistoryW *);
+
+int		history_w(HistoryW *, HistEventW *, int, ...);
+
+/*
+ * ==== Tokenization ====
+ */
+typedef struct tokenizerW TokenizerW;
+
+/* Wide character tokenizer support */
+TokenizerW	*tok_winit(const wchar_t *);
+void		 tok_wend(TokenizerW *);
+void		 tok_wreset(TokenizerW *);
+int		 tok_wline(TokenizerW *, const LineInfoW *,
+		    int *, const wchar_t ***, int *, int *);
+int		 tok_wstr(TokenizerW *, const wchar_t *,
+		    int *, const wchar_t ***);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HISTEDIT_H_ */
diff --git a/src/history.c b/src/history.c
new file mode 100644
index 0000000..c65d4ee
--- /dev/null
+++ b/src/history.c
@@ -0,0 +1,1103 @@
+/*	$NetBSD: history.c,v 1.46 2011/11/18 20:39:18 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef NARROWCHAR
+#include "config.h"
+#endif
+
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)history.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: history.c,v 1.46 2011/11/18 20:39:18 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * hist.c: TYPE(History) access functions
+ */
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <vis.h>
+#include <sys/stat.h>
+
+static const char hist_cookie[] = "_HiStOrY_V2_\n";
+
+#include "histedit.h"
+#include "chartype.h"
+
+typedef int (*history_gfun_t)(void *, TYPE(HistEvent) *);
+typedef int (*history_efun_t)(void *, TYPE(HistEvent) *, const Char *);
+typedef void (*history_vfun_t)(void *, TYPE(HistEvent) *);
+typedef int (*history_sfun_t)(void *, TYPE(HistEvent) *, const int);
+
+struct TYPE(history) {
+	void *h_ref;		/* Argument for history fcns	 */
+	int h_ent;		/* Last entry point for history	 */
+	history_gfun_t h_first;	/* Get the first element	 */
+	history_gfun_t h_next;	/* Get the next element		 */
+	history_gfun_t h_last;	/* Get the last element		 */
+	history_gfun_t h_prev;	/* Get the previous element	 */
+	history_gfun_t h_curr;	/* Get the current element	 */
+	history_sfun_t h_set;	/* Set the current element	 */
+	history_sfun_t h_del;	/* Set the given element	 */
+	history_vfun_t h_clear;	/* Clear the history list	 */
+	history_efun_t h_enter;	/* Add an element		 */
+	history_efun_t h_add;	/* Append to an element		 */
+};
+
+#define	HNEXT(h, ev)		(*(h)->h_next)((h)->h_ref, ev)
+#define	HFIRST(h, ev)		(*(h)->h_first)((h)->h_ref, ev)
+#define	HPREV(h, ev)		(*(h)->h_prev)((h)->h_ref, ev)
+#define	HLAST(h, ev)		(*(h)->h_last)((h)->h_ref, ev)
+#define	HCURR(h, ev)		(*(h)->h_curr)((h)->h_ref, ev)
+#define	HSET(h, ev, n)		(*(h)->h_set)((h)->h_ref, ev, n)
+#define	HCLEAR(h, ev)		(*(h)->h_clear)((h)->h_ref, ev)
+#define	HENTER(h, ev, str)	(*(h)->h_enter)((h)->h_ref, ev, str)
+#define	HADD(h, ev, str)	(*(h)->h_add)((h)->h_ref, ev, str)
+#define	HDEL(h, ev, n)		(*(h)->h_del)((h)->h_ref, ev, n)
+
+#define	h_strdup(a)	Strdup(a)
+#define	h_malloc(a)	malloc(a)
+#define	h_realloc(a, b)	realloc((a), (b))
+#define	h_free(a)	free(a)
+
+typedef struct {
+    int		num;
+    Char	*str;
+} HistEventPrivate;
+
+
+
+private int history_setsize(TYPE(History) *, TYPE(HistEvent) *, int);
+private int history_getsize(TYPE(History) *, TYPE(HistEvent) *);
+private int history_setunique(TYPE(History) *, TYPE(HistEvent) *, int);
+private int history_getunique(TYPE(History) *, TYPE(HistEvent) *);
+private int history_set_fun(TYPE(History) *, TYPE(History) *);
+private int history_load(TYPE(History) *, const char *);
+private int history_save(TYPE(History) *, const char *);
+private int history_prev_event(TYPE(History) *, TYPE(HistEvent) *, int);
+private int history_next_event(TYPE(History) *, TYPE(HistEvent) *, int);
+private int history_next_string(TYPE(History) *, TYPE(HistEvent) *, const Char *);
+private int history_prev_string(TYPE(History) *, TYPE(HistEvent) *, const Char *);
+
+
+/***********************************************************************/
+
+/*
+ * Builtin- history implementation
+ */
+typedef struct hentry_t {
+	TYPE(HistEvent) ev;		/* What we return		 */
+	void *data;		/* data				 */
+	struct hentry_t *next;	/* Next entry			 */
+	struct hentry_t *prev;	/* Previous entry		 */
+} hentry_t;
+
+typedef struct history_t {
+	hentry_t list;		/* Fake list header element	*/
+	hentry_t *cursor;	/* Current element in the list	*/
+	int max;		/* Maximum number of events	*/
+	int cur;		/* Current number of events	*/
+	int eventid;		/* For generation of unique event id	 */
+	int flags;		/* TYPE(History) flags		*/
+#define H_UNIQUE	1	/* Store only unique elements	*/
+} history_t;
+
+private int history_def_next(void *, TYPE(HistEvent) *);
+private int history_def_first(void *, TYPE(HistEvent) *);
+private int history_def_prev(void *, TYPE(HistEvent) *);
+private int history_def_last(void *, TYPE(HistEvent) *);
+private int history_def_curr(void *, TYPE(HistEvent) *);
+private int history_def_set(void *, TYPE(HistEvent) *, const int);
+private void history_def_clear(void *, TYPE(HistEvent) *);
+private int history_def_enter(void *, TYPE(HistEvent) *, const Char *);
+private int history_def_add(void *, TYPE(HistEvent) *, const Char *);
+private int history_def_del(void *, TYPE(HistEvent) *, const int);
+
+private int history_def_init(void **, TYPE(HistEvent) *, int);
+private int history_def_insert(history_t *, TYPE(HistEvent) *, const Char *);
+private void history_def_delete(history_t *, TYPE(HistEvent) *, hentry_t *);
+
+private int history_deldata_nth(history_t *, TYPE(HistEvent) *, int, void **);
+private int history_set_nth(void *, TYPE(HistEvent) *, int);
+
+#define	history_def_setsize(p, num)(void) (((history_t *)p)->max = (num))
+#define	history_def_getsize(p)  (((history_t *)p)->cur)
+#define	history_def_getunique(p) (((((history_t *)p)->flags) & H_UNIQUE) != 0)
+#define	history_def_setunique(p, uni) \
+    if (uni) \
+	(((history_t *)p)->flags) |= H_UNIQUE; \
+    else \
+	(((history_t *)p)->flags) &= ~H_UNIQUE
+
+#define	he_strerror(code)	he_errlist[code]
+#define	he_seterrev(evp, code)	{\
+				    evp->num = code;\
+				    evp->str = he_strerror(code);\
+				}
+
+/* error messages */
+static const Char *const he_errlist[] = {
+	STR("OK"),
+	STR("unknown error"),
+	STR("malloc() failed"),
+	STR("first event not found"),
+	STR("last event not found"),
+	STR("empty list"),
+	STR("no next event"),
+	STR("no previous event"),
+	STR("current event is invalid"),
+	STR("event not found"),
+	STR("can't read history from file"),
+	STR("can't write history"),
+	STR("required parameter(s) not supplied"),
+	STR("history size negative"),
+	STR("function not allowed with other history-functions-set the default"),
+	STR("bad parameters")
+};
+/* error codes */
+#define	_HE_OK                   0
+#define	_HE_UNKNOWN		 1
+#define	_HE_MALLOC_FAILED        2
+#define	_HE_FIRST_NOTFOUND       3
+#define	_HE_LAST_NOTFOUND        4
+#define	_HE_EMPTY_LIST           5
+#define	_HE_END_REACHED          6
+#define	_HE_START_REACHED	 7
+#define	_HE_CURR_INVALID	 8
+#define	_HE_NOT_FOUND		 9
+#define	_HE_HIST_READ		10
+#define	_HE_HIST_WRITE		11
+#define	_HE_PARAM_MISSING	12
+#define	_HE_SIZE_NEGATIVE	13
+#define	_HE_NOT_ALLOWED		14
+#define	_HE_BAD_PARAM		15
+
+/* history_def_first():
+ *	Default function to return the first event in the history.
+ */
+private int
+history_def_first(void *p, TYPE(HistEvent) *ev)
+{
+	history_t *h = (history_t *) p;
+
+	h->cursor = h->list.next;
+	if (h->cursor != &h->list)
+		*ev = h->cursor->ev;
+	else {
+		he_seterrev(ev, _HE_FIRST_NOTFOUND);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/* history_def_last():
+ *	Default function to return the last event in the history.
+ */
+private int
+history_def_last(void *p, TYPE(HistEvent) *ev)
+{
+	history_t *h = (history_t *) p;
+
+	h->cursor = h->list.prev;
+	if (h->cursor != &h->list)
+		*ev = h->cursor->ev;
+	else {
+		he_seterrev(ev, _HE_LAST_NOTFOUND);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/* history_def_next():
+ *	Default function to return the next event in the history.
+ */
+private int
+history_def_next(void *p, TYPE(HistEvent) *ev)
+{
+	history_t *h = (history_t *) p;
+
+	if (h->cursor == &h->list) {
+		he_seterrev(ev, _HE_EMPTY_LIST);
+		return -1;
+	}
+
+	if (h->cursor->next == &h->list) {
+		he_seterrev(ev, _HE_END_REACHED);
+		return -1;
+	}
+
+        h->cursor = h->cursor->next;
+        *ev = h->cursor->ev;
+
+	return 0;
+}
+
+
+/* history_def_prev():
+ *	Default function to return the previous event in the history.
+ */
+private int
+history_def_prev(void *p, TYPE(HistEvent) *ev)
+{
+	history_t *h = (history_t *) p;
+
+	if (h->cursor == &h->list) {
+		he_seterrev(ev,
+		    (h->cur > 0) ? _HE_END_REACHED : _HE_EMPTY_LIST);
+		return -1;
+	}
+
+	if (h->cursor->prev == &h->list) {
+		he_seterrev(ev, _HE_START_REACHED);
+		return -1;
+	}
+
+        h->cursor = h->cursor->prev;
+        *ev = h->cursor->ev;
+
+	return 0;
+}
+
+
+/* history_def_curr():
+ *	Default function to return the current event in the history.
+ */
+private int
+history_def_curr(void *p, TYPE(HistEvent) *ev)
+{
+	history_t *h = (history_t *) p;
+
+	if (h->cursor != &h->list)
+		*ev = h->cursor->ev;
+	else {
+		he_seterrev(ev,
+		    (h->cur > 0) ? _HE_CURR_INVALID : _HE_EMPTY_LIST);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+/* history_def_set():
+ *	Default function to set the current event in the history to the
+ *	given one.
+ */
+private int
+history_def_set(void *p, TYPE(HistEvent) *ev, const int n)
+{
+	history_t *h = (history_t *) p;
+
+	if (h->cur == 0) {
+		he_seterrev(ev, _HE_EMPTY_LIST);
+		return -1;
+	}
+	if (h->cursor == &h->list || h->cursor->ev.num != n) {
+		for (h->cursor = h->list.next; h->cursor != &h->list;
+		    h->cursor = h->cursor->next)
+			if (h->cursor->ev.num == n)
+				break;
+	}
+	if (h->cursor == &h->list) {
+		he_seterrev(ev, _HE_NOT_FOUND);
+		return -1;
+	}
+	return 0;
+}
+
+
+/* history_set_nth():
+ *	Default function to set the current event in the history to the
+ *	n-th one.
+ */
+private int
+history_set_nth(void *p, TYPE(HistEvent) *ev, int n)
+{
+	history_t *h = (history_t *) p;
+
+	if (h->cur == 0) {
+		he_seterrev(ev, _HE_EMPTY_LIST);
+		return -1;
+	}
+	for (h->cursor = h->list.prev; h->cursor != &h->list;
+	    h->cursor = h->cursor->prev)
+		if (n-- <= 0)
+			break;
+	if (h->cursor == &h->list) {
+		he_seterrev(ev, _HE_NOT_FOUND);
+		return -1;
+	}
+	return 0;
+}
+
+
+/* history_def_add():
+ *	Append string to element
+ */
+private int
+history_def_add(void *p, TYPE(HistEvent) *ev, const Char *str)
+{
+	history_t *h = (history_t *) p;
+	size_t len;
+	Char *s;
+	HistEventPrivate *evp = (void *)&h->cursor->ev;
+
+	if (h->cursor == &h->list)
+		return history_def_enter(p, ev, str);
+	len = Strlen(evp->str) + Strlen(str) + 1;
+	s = h_malloc(len * sizeof(*s));
+	if (s == NULL) {
+		he_seterrev(ev, _HE_MALLOC_FAILED);
+		return -1;
+	}
+	(void) Strncpy(s, h->cursor->ev.str, len);
+        s[len - 1] = '\0';
+	(void) Strncat(s, str, len - Strlen(s) - 1);
+	h_free(evp->str);
+	evp->str = s;
+	*ev = h->cursor->ev;
+	return 0;
+}
+
+
+private int
+history_deldata_nth(history_t *h, TYPE(HistEvent) *ev,
+    int num, void **data)
+{
+	if (history_set_nth(h, ev, num) != 0)
+		return -1;
+	/* magic value to skip delete (just set to n-th history) */
+	if (data == (void **)-1)
+		return 0;
+	ev->str = Strdup(h->cursor->ev.str);
+	ev->num = h->cursor->ev.num;
+	if (data)
+		*data = h->cursor->data;
+	history_def_delete(h, ev, h->cursor);
+	return 0;
+}
+
+
+/* history_def_del():
+ *	Delete element hp of the h list
+ */
+/* ARGSUSED */
+private int
+history_def_del(void *p, TYPE(HistEvent) *ev __attribute__((__unused__)),
+    const int num)
+{
+	history_t *h = (history_t *) p;
+	if (history_def_set(h, ev, num) != 0)
+		return -1;
+	ev->str = Strdup(h->cursor->ev.str);
+	ev->num = h->cursor->ev.num;
+	history_def_delete(h, ev, h->cursor);
+	return 0;
+}
+
+
+/* history_def_delete():
+ *	Delete element hp of the h list
+ */
+/* ARGSUSED */
+private void
+history_def_delete(history_t *h, 
+		   TYPE(HistEvent) *ev __attribute__((__unused__)), hentry_t *hp)
+{
+	HistEventPrivate *evp = (void *)&hp->ev;
+	if (hp == &h->list)
+		abort();
+	if (h->cursor == hp) {
+		h->cursor = hp->prev;
+		if (h->cursor == &h->list)
+			h->cursor = hp->next;
+	}
+	hp->prev->next = hp->next;
+	hp->next->prev = hp->prev;
+	h_free(evp->str);
+	h_free(hp);
+	h->cur--;
+}
+
+
+/* history_def_insert():
+ *	Insert element with string str in the h list
+ */
+private int
+history_def_insert(history_t *h, TYPE(HistEvent) *ev, const Char *str)
+{
+	hentry_t *c;
+
+	c = h_malloc(sizeof(*c));
+	if (c == NULL)
+		goto oomem;
+	if ((c->ev.str = h_strdup(str)) == NULL) {
+		h_free(c);
+		goto oomem;
+	}
+	c->data = NULL;
+	c->ev.num = ++h->eventid;
+	c->next = h->list.next;
+	c->prev = &h->list;
+	h->list.next->prev = c;
+	h->list.next = c;
+	h->cur++;
+	h->cursor = c;
+
+	*ev = c->ev;
+	return 0;
+oomem:
+	he_seterrev(ev, _HE_MALLOC_FAILED);
+	return -1;
+}
+
+
+/* history_def_enter():
+ *	Default function to enter an item in the history
+ */
+private int
+history_def_enter(void *p, TYPE(HistEvent) *ev, const Char *str)
+{
+	history_t *h = (history_t *) p;
+
+	if ((h->flags & H_UNIQUE) != 0 && h->list.next != &h->list &&
+	    Strcmp(h->list.next->ev.str, str) == 0)
+	    return 0;
+
+	if (history_def_insert(h, ev, str) == -1)
+		return -1;	/* error, keep error message */
+
+	/*
+         * Always keep at least one entry.
+         * This way we don't have to check for the empty list.
+         */
+	while (h->cur > h->max && h->cur > 0)
+		history_def_delete(h, ev, h->list.prev);
+
+	return 1;
+}
+
+
+/* history_def_init():
+ *	Default history initialization function
+ */
+/* ARGSUSED */
+private int
+history_def_init(void **p, TYPE(HistEvent) *ev __attribute__((__unused__)), int n)
+{
+	history_t *h = (history_t *) h_malloc(sizeof(*h));
+	if (h == NULL)
+		return -1;
+
+	if (n <= 0)
+		n = 0;
+	h->eventid = 0;
+	h->cur = 0;
+	h->max = n;
+	h->list.next = h->list.prev = &h->list;
+	h->list.ev.str = NULL;
+	h->list.ev.num = 0;
+	h->cursor = &h->list;
+	h->flags = 0;
+	*p = h;
+	return 0;
+}
+
+
+/* history_def_clear():
+ *	Default history cleanup function
+ */
+private void
+history_def_clear(void *p, TYPE(HistEvent) *ev)
+{
+	history_t *h = (history_t *) p;
+
+	while (h->list.prev != &h->list)
+		history_def_delete(h, ev, h->list.prev);
+	h->cursor = &h->list;
+	h->eventid = 0;
+	h->cur = 0;
+}
+
+
+
+
+/************************************************************************/
+
+/* history_init():
+ *	Initialization function.
+ */
+public TYPE(History) *
+FUN(history,init)(void)
+{
+	TYPE(HistEvent) ev;
+	TYPE(History) *h = (TYPE(History) *) h_malloc(sizeof(*h));
+	if (h == NULL)
+		return NULL;
+
+	if (history_def_init(&h->h_ref, &ev, 0) == -1) {
+		h_free(h);
+		return NULL;
+	}
+	h->h_ent = -1;
+	h->h_next = history_def_next;
+	h->h_first = history_def_first;
+	h->h_last = history_def_last;
+	h->h_prev = history_def_prev;
+	h->h_curr = history_def_curr;
+	h->h_set = history_def_set;
+	h->h_clear = history_def_clear;
+	h->h_enter = history_def_enter;
+	h->h_add = history_def_add;
+	h->h_del = history_def_del;
+
+	return h;
+}
+
+
+/* history_end():
+ *	clean up history;
+ */
+public void
+FUN(history,end)(TYPE(History) *h)
+{
+	TYPE(HistEvent) ev;
+
+	if (h->h_next == history_def_next)
+		history_def_clear(h->h_ref, &ev);
+	h_free(h->h_ref);
+	h_free(h);
+}
+
+
+
+/* history_setsize():
+ *	Set history number of events
+ */
+private int
+history_setsize(TYPE(History) *h, TYPE(HistEvent) *ev, int num)
+{
+
+	if (h->h_next != history_def_next) {
+		he_seterrev(ev, _HE_NOT_ALLOWED);
+		return -1;
+	}
+	if (num < 0) {
+		he_seterrev(ev, _HE_BAD_PARAM);
+		return -1;
+	}
+	history_def_setsize(h->h_ref, num);
+	return 0;
+}
+
+
+/* history_getsize():
+ *      Get number of events currently in history
+ */
+private int
+history_getsize(TYPE(History) *h, TYPE(HistEvent) *ev)
+{
+	if (h->h_next != history_def_next) {
+		he_seterrev(ev, _HE_NOT_ALLOWED);
+		return -1;
+	}
+	ev->num = history_def_getsize(h->h_ref);
+	if (ev->num < -1) {
+		he_seterrev(ev, _HE_SIZE_NEGATIVE);
+		return -1;
+	}
+	return 0;
+}
+
+
+/* history_setunique():
+ *	Set if adjacent equal events should not be entered in history.
+ */
+private int
+history_setunique(TYPE(History) *h, TYPE(HistEvent) *ev, int uni)
+{
+
+	if (h->h_next != history_def_next) {
+		he_seterrev(ev, _HE_NOT_ALLOWED);
+		return -1;
+	}
+	history_def_setunique(h->h_ref, uni);
+	return 0;
+}
+
+
+/* history_getunique():
+ *	Get if adjacent equal events should not be entered in history.
+ */
+private int
+history_getunique(TYPE(History) *h, TYPE(HistEvent) *ev)
+{
+	if (h->h_next != history_def_next) {
+		he_seterrev(ev, _HE_NOT_ALLOWED);
+		return -1;
+	}
+	ev->num = history_def_getunique(h->h_ref);
+	return 0;
+}
+
+
+/* history_set_fun():
+ *	Set history functions
+ */
+private int
+history_set_fun(TYPE(History) *h, TYPE(History) *nh)
+{
+	TYPE(HistEvent) ev;
+
+	if (nh->h_first == NULL || nh->h_next == NULL || nh->h_last == NULL ||
+	    nh->h_prev == NULL || nh->h_curr == NULL || nh->h_set == NULL ||
+	    nh->h_enter == NULL || nh->h_add == NULL || nh->h_clear == NULL ||
+	    nh->h_del == NULL || nh->h_ref == NULL) {
+		if (h->h_next != history_def_next) {
+			if (history_def_init(&h->h_ref, &ev, 0) == -1)
+				return -1;
+			h->h_first = history_def_first;
+			h->h_next = history_def_next;
+			h->h_last = history_def_last;
+			h->h_prev = history_def_prev;
+			h->h_curr = history_def_curr;
+			h->h_set = history_def_set;
+			h->h_clear = history_def_clear;
+			h->h_enter = history_def_enter;
+			h->h_add = history_def_add;
+			h->h_del = history_def_del;
+		}
+		return -1;
+	}
+	if (h->h_next == history_def_next)
+		history_def_clear(h->h_ref, &ev);
+
+	h->h_ent = -1;
+	h->h_first = nh->h_first;
+	h->h_next = nh->h_next;
+	h->h_last = nh->h_last;
+	h->h_prev = nh->h_prev;
+	h->h_curr = nh->h_curr;
+	h->h_set = nh->h_set;
+	h->h_clear = nh->h_clear;
+	h->h_enter = nh->h_enter;
+	h->h_add = nh->h_add;
+	h->h_del = nh->h_del;
+
+	return 0;
+}
+
+
+/* history_load():
+ *	TYPE(History) load function
+ */
+private int
+history_load(TYPE(History) *h, const char *fname)
+{
+	FILE *fp;
+	char *line;
+	size_t sz, max_size;
+	char *ptr;
+	int i = -1;
+	TYPE(HistEvent) ev;
+#ifdef WIDECHAR
+	static ct_buffer_t conv;
+#endif
+
+	if ((fp = fopen(fname, "r")) == NULL)
+		return i;
+
+	if ((line = fgetln(fp, &sz)) == NULL)
+		goto done;
+
+	if (strncmp(line, hist_cookie, sz) != 0)
+		goto done;
+
+	ptr = h_malloc((max_size = 1024) * sizeof(*ptr));
+	if (ptr == NULL)
+		goto done;
+	for (i = 0; (line = fgetln(fp, &sz)) != NULL; i++) {
+		char c = line[sz];
+
+		if (sz != 0 && line[sz - 1] == '\n')
+			line[--sz] = '\0';
+		else
+			line[sz] = '\0';
+
+		if (max_size < sz) {
+			char *nptr;
+			max_size = (sz + 1024) & (size_t)~1023;
+			nptr = h_realloc(ptr, max_size * sizeof(*ptr));
+			if (nptr == NULL) {
+				i = -1;
+				goto oomem;
+			}
+			ptr = nptr;
+		}
+		(void) strunvis(ptr, line);
+		line[sz] = c;
+		if (HENTER(h, &ev, ct_decode_string(ptr, &conv)) == -1) {
+			i = -1;
+			goto oomem;
+		}
+	}
+oomem:
+	h_free(ptr);
+done:
+	(void) fclose(fp);
+	return i;
+}
+
+
+/* history_save():
+ *	TYPE(History) save function
+ */
+private int
+history_save(TYPE(History) *h, const char *fname)
+{
+	FILE *fp;
+	TYPE(HistEvent) ev;
+	int i = -1, retval;
+	size_t len, max_size;
+	char *ptr;
+	const char *str;
+#ifdef WIDECHAR
+	static ct_buffer_t conv;
+#endif
+
+	if ((fp = fopen(fname, "w")) == NULL)
+		return -1;
+
+	if (fchmod(fileno(fp), S_IRUSR|S_IWUSR) == -1)
+		goto done;
+	if (fputs(hist_cookie, fp) == EOF)
+		goto done;
+	ptr = h_malloc((max_size = 1024) * sizeof(*ptr));
+	if (ptr == NULL)
+		goto done;
+	for (i = 0, retval = HLAST(h, &ev);
+	    retval != -1;
+	    retval = HPREV(h, &ev), i++) {
+		str = ct_encode_string(ev.str, &conv);
+		len = strlen(str) * 4;
+		if (len >= max_size) {
+			char *nptr;
+			max_size = (len + 1024) & (size_t)~1023;
+			nptr = h_realloc(ptr, max_size * sizeof(*ptr));
+			if (nptr == NULL) {
+				i = -1;
+				goto oomem;
+			}
+			ptr = nptr;
+		}
+		(void) strvis(ptr, str, VIS_WHITE);
+		(void) fprintf(fp, "%s\n", ptr);
+	}
+oomem:
+	h_free(ptr);
+done:
+	(void) fclose(fp);
+	return i;
+}
+
+
+/* history_prev_event():
+ *	Find the previous event, with number given
+ */
+private int
+history_prev_event(TYPE(History) *h, TYPE(HistEvent) *ev, int num)
+{
+	int retval;
+
+	for (retval = HCURR(h, ev); retval != -1; retval = HPREV(h, ev))
+		if (ev->num == num)
+			return 0;
+
+	he_seterrev(ev, _HE_NOT_FOUND);
+	return -1;
+}
+
+
+private int
+history_next_evdata(TYPE(History) *h, TYPE(HistEvent) *ev, int num, void **d)
+{
+	int retval;
+
+	for (retval = HCURR(h, ev); retval != -1; retval = HPREV(h, ev))
+		if (ev->num == num) {
+			if (d)
+				*d = ((history_t *)h->h_ref)->cursor->data;
+			return 0;
+		}
+
+	he_seterrev(ev, _HE_NOT_FOUND);
+	return -1;
+}
+
+
+/* history_next_event():
+ *	Find the next event, with number given
+ */
+private int
+history_next_event(TYPE(History) *h, TYPE(HistEvent) *ev, int num)
+{
+	int retval;
+
+	for (retval = HCURR(h, ev); retval != -1; retval = HNEXT(h, ev))
+		if (ev->num == num)
+			return 0;
+
+	he_seterrev(ev, _HE_NOT_FOUND);
+	return -1;
+}
+
+
+/* history_prev_string():
+ *	Find the previous event beginning with string
+ */
+private int
+history_prev_string(TYPE(History) *h, TYPE(HistEvent) *ev, const Char *str)
+{
+	size_t len = Strlen(str);
+	int retval;
+
+	for (retval = HCURR(h, ev); retval != -1; retval = HNEXT(h, ev))
+		if (Strncmp(str, ev->str, len) == 0)
+			return 0;
+
+	he_seterrev(ev, _HE_NOT_FOUND);
+	return -1;
+}
+
+
+/* history_next_string():
+ *	Find the next event beginning with string
+ */
+private int
+history_next_string(TYPE(History) *h, TYPE(HistEvent) *ev, const Char *str)
+{
+	size_t len = Strlen(str);
+	int retval;
+
+	for (retval = HCURR(h, ev); retval != -1; retval = HPREV(h, ev))
+		if (Strncmp(str, ev->str, len) == 0)
+			return 0;
+
+	he_seterrev(ev, _HE_NOT_FOUND);
+	return -1;
+}
+
+
+/* history():
+ *	User interface to history functions.
+ */
+int
+FUNW(history)(TYPE(History) *h, TYPE(HistEvent) *ev, int fun, ...)
+{
+	va_list va;
+	const Char *str;
+	int retval;
+
+	va_start(va, fun);
+
+	he_seterrev(ev, _HE_OK);
+
+	switch (fun) {
+	case H_GETSIZE:
+		retval = history_getsize(h, ev);
+		break;
+
+	case H_SETSIZE:
+		retval = history_setsize(h, ev, va_arg(va, int));
+		break;
+
+	case H_GETUNIQUE:
+		retval = history_getunique(h, ev);
+		break;
+
+	case H_SETUNIQUE:
+		retval = history_setunique(h, ev, va_arg(va, int));
+		break;
+
+	case H_ADD:
+		str = va_arg(va, const Char *);
+		retval = HADD(h, ev, str);
+		break;
+
+	case H_DEL:
+		retval = HDEL(h, ev, va_arg(va, const int));
+		break;
+
+	case H_ENTER:
+		str = va_arg(va, const Char *);
+		if ((retval = HENTER(h, ev, str)) != -1)
+			h->h_ent = ev->num;
+		break;
+
+	case H_APPEND:
+		str = va_arg(va, const Char *);
+		if ((retval = HSET(h, ev, h->h_ent)) != -1)
+			retval = HADD(h, ev, str);
+		break;
+
+	case H_FIRST:
+		retval = HFIRST(h, ev);
+		break;
+
+	case H_NEXT:
+		retval = HNEXT(h, ev);
+		break;
+
+	case H_LAST:
+		retval = HLAST(h, ev);
+		break;
+
+	case H_PREV:
+		retval = HPREV(h, ev);
+		break;
+
+	case H_CURR:
+		retval = HCURR(h, ev);
+		break;
+
+	case H_SET:
+		retval = HSET(h, ev, va_arg(va, const int));
+		break;
+
+	case H_CLEAR:
+		HCLEAR(h, ev);
+		retval = 0;
+		break;
+
+	case H_LOAD:
+		retval = history_load(h, va_arg(va, const char *));
+		if (retval == -1)
+			he_seterrev(ev, _HE_HIST_READ);
+		break;
+
+	case H_SAVE:
+		retval = history_save(h, va_arg(va, const char *));
+		if (retval == -1)
+			he_seterrev(ev, _HE_HIST_WRITE);
+		break;
+
+	case H_PREV_EVENT:
+		retval = history_prev_event(h, ev, va_arg(va, int));
+		break;
+
+	case H_NEXT_EVENT:
+		retval = history_next_event(h, ev, va_arg(va, int));
+		break;
+
+	case H_PREV_STR:
+		retval = history_prev_string(h, ev, va_arg(va, const Char *));
+		break;
+
+	case H_NEXT_STR:
+		retval = history_next_string(h, ev, va_arg(va, const Char *));
+		break;
+
+	case H_FUNC:
+	{
+		TYPE(History) hf;
+
+		hf.h_ref = va_arg(va, void *);
+		h->h_ent = -1;
+		hf.h_first = va_arg(va, history_gfun_t);
+		hf.h_next = va_arg(va, history_gfun_t);
+		hf.h_last = va_arg(va, history_gfun_t);
+		hf.h_prev = va_arg(va, history_gfun_t);
+		hf.h_curr = va_arg(va, history_gfun_t);
+		hf.h_set = va_arg(va, history_sfun_t);
+		hf.h_clear = va_arg(va, history_vfun_t);
+		hf.h_enter = va_arg(va, history_efun_t);
+		hf.h_add = va_arg(va, history_efun_t);
+		hf.h_del = va_arg(va, history_sfun_t);
+
+		if ((retval = history_set_fun(h, &hf)) == -1)
+			he_seterrev(ev, _HE_PARAM_MISSING);
+		break;
+	}
+
+	case H_END:
+		FUN(history,end)(h);
+		retval = 0;
+		break;
+
+	case H_NEXT_EVDATA:
+	{
+		int num = va_arg(va, int);
+		void **d = va_arg(va, void **);
+		retval = history_next_evdata(h, ev, num, d);
+		break;
+	}
+
+	case H_DELDATA:
+	{
+		int num = va_arg(va, int);
+		void **d = va_arg(va, void **);
+		retval = history_deldata_nth((history_t *)h->h_ref, ev, num, d);
+		break;
+	}
+
+	case H_REPLACE: /* only use after H_NEXT_EVDATA */
+	{
+		const Char *line = va_arg(va, const Char *);
+		void *d = va_arg(va, void *);
+		const Char *s;
+		if(!line || !(s = Strdup(line))) {
+			retval = -1;
+			break;
+		}
+		((history_t *)h->h_ref)->cursor->ev.str = s;
+		((history_t *)h->h_ref)->cursor->data = d;
+		retval = 0;
+		break;
+	}
+
+	default:
+		retval = -1;
+		he_seterrev(ev, _HE_UNKNOWN);
+		break;
+	}
+	va_end(va);
+	return retval;
+}
diff --git a/src/keymacro.c b/src/keymacro.c
new file mode 100644
index 0000000..1cab508
--- /dev/null
+++ b/src/keymacro.c
@@ -0,0 +1,671 @@
+/*	$NetBSD: keymacro.c,v 1.7 2011/08/16 16:25:15 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)key.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: keymacro.c,v 1.7 2011/08/16 16:25:15 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * keymacro.c: This module contains the procedures for maintaining
+ *	       the extended-key map.
+ *
+ *      An extended-key (key) is a sequence of keystrokes introduced
+ *	with a sequence introducer and consisting of an arbitrary
+ *	number of characters.  This module maintains a map (the
+ *	el->el_keymacro.map)
+ *	to convert these extended-key sequences into input strs
+ *	(XK_STR), editor functions (XK_CMD), or unix commands (XK_EXE).
+ *
+ *      Warning:
+ *	  If key is a substr of some other keys, then the longer
+ *	  keys are lost!!  That is, if the keys "abcd" and "abcef"
+ *	  are in el->el_keymacro.map, adding the key "abc" will cause
+ *	  the first two definitions to be lost.
+ *
+ *      Restrictions:
+ *      -------------
+ *      1) It is not possible to have one key that is a
+ *	   substr of another.
+ */
+#include <string.h>
+#include <stdlib.h>
+
+#include "el.h"
+
+/*
+ * The Nodes of the el->el_keymacro.map.  The el->el_keymacro.map is a
+ * linked list of these node elements
+ */
+struct keymacro_node_t {
+	Char		 ch;		/* single character of key 	 */
+	int		 type;		/* node type			 */
+	keymacro_value_t val;		/* command code or pointer to str,  */
+					/* if this is a leaf 		 */
+	struct keymacro_node_t *next;	/* ptr to next char of this key  */
+	struct keymacro_node_t *sibling;/* ptr to another key with same prefix*/
+};
+
+private int		 node_trav(EditLine *, keymacro_node_t *, Char *,
+    keymacro_value_t *);
+private int		 node__try(EditLine *, keymacro_node_t *, const Char *,
+    keymacro_value_t *, int);
+private keymacro_node_t	*node__get(Int);
+private void		 node__free(keymacro_node_t *);
+private void		 node__put(EditLine *, keymacro_node_t *);
+private int		 node__delete(EditLine *, keymacro_node_t **,
+    const Char *);
+private int		 node_lookup(EditLine *, const Char *,
+    keymacro_node_t *, size_t);
+private int		 node_enum(EditLine *, keymacro_node_t *, size_t);
+
+#define	KEY_BUFSIZ	EL_BUFSIZ
+
+
+/* keymacro_init():
+ *	Initialize the key maps
+ */
+protected int
+keymacro_init(EditLine *el)
+{
+
+	el->el_keymacro.buf = el_malloc(KEY_BUFSIZ *
+	    sizeof(*el->el_keymacro.buf));
+	if (el->el_keymacro.buf == NULL)
+		return -1;
+	el->el_keymacro.map = NULL;
+	keymacro_reset(el);
+	return 0;
+}
+
+/* keymacro_end():
+ *	Free the key maps
+ */
+protected void
+keymacro_end(EditLine *el)
+{
+
+	el_free(el->el_keymacro.buf);
+	el->el_keymacro.buf = NULL;
+	node__free(el->el_keymacro.map);
+}
+
+
+/* keymacro_map_cmd():
+ *	Associate cmd with a key value
+ */
+protected keymacro_value_t *
+keymacro_map_cmd(EditLine *el, int cmd)
+{
+
+	el->el_keymacro.val.cmd = (el_action_t) cmd;
+	return &el->el_keymacro.val;
+}
+
+
+/* keymacro_map_str():
+ *	Associate str with a key value
+ */
+protected keymacro_value_t *
+keymacro_map_str(EditLine *el, Char *str)
+{
+
+	el->el_keymacro.val.str = str;
+	return &el->el_keymacro.val;
+}
+
+
+/* keymacro_reset():
+ *	Takes all nodes on el->el_keymacro.map and puts them on free list.
+ *	Then initializes el->el_keymacro.map with arrow keys
+ *	[Always bind the ansi arrow keys?]
+ */
+protected void
+keymacro_reset(EditLine *el)
+{
+
+	node__put(el, el->el_keymacro.map);
+	el->el_keymacro.map = NULL;
+	return;
+}
+
+
+/* keymacro_get():
+ *	Calls the recursive function with entry point el->el_keymacro.map
+ *      Looks up *ch in map and then reads characters until a
+ *      complete match is found or a mismatch occurs. Returns the
+ *      type of the match found (XK_STR, XK_CMD, or XK_EXE).
+ *      Returns NULL in val.str and XK_STR for no match.
+ *      The last character read is returned in *ch.
+ */
+protected int
+keymacro_get(EditLine *el, Char *ch, keymacro_value_t *val)
+{
+
+	return node_trav(el, el->el_keymacro.map, ch, val);
+}
+
+
+/* keymacro_add():
+ *      Adds key to the el->el_keymacro.map and associates the value in
+ *	val with it. If key is already is in el->el_keymacro.map, the new
+ *	code is applied to the existing key. Ntype specifies if code is a
+ *	command, an out str or a unix command.
+ */
+protected void
+keymacro_add(EditLine *el, const Char *key, keymacro_value_t *val, int ntype)
+{
+
+	if (key[0] == '\0') {
+		(void) fprintf(el->el_errfile,
+		    "keymacro_add: Null extended-key not allowed.\n");
+		return;
+	}
+	if (ntype == XK_CMD && val->cmd == ED_SEQUENCE_LEAD_IN) {
+		(void) fprintf(el->el_errfile,
+		    "keymacro_add: sequence-lead-in command not allowed\n");
+		return;
+	}
+	if (el->el_keymacro.map == NULL)
+		/* tree is initially empty.  Set up new node to match key[0] */
+		el->el_keymacro.map = node__get(key[0]);
+			/* it is properly initialized */
+
+	/* Now recurse through el->el_keymacro.map */
+	(void) node__try(el, el->el_keymacro.map, key, val, ntype);
+	return;
+}
+
+
+/* keymacro_clear():
+ *
+ */
+protected void
+keymacro_clear(EditLine *el, el_action_t *map, const Char *in)
+{
+#ifdef WIDECHAR
+        if (*in > N_KEYS) /* can't be in the map */
+                return;
+#endif
+	if ((map[(unsigned char)*in] == ED_SEQUENCE_LEAD_IN) &&
+	    ((map == el->el_map.key &&
+	    el->el_map.alt[(unsigned char)*in] != ED_SEQUENCE_LEAD_IN) ||
+	    (map == el->el_map.alt &&
+	    el->el_map.key[(unsigned char)*in] != ED_SEQUENCE_LEAD_IN)))
+		(void) keymacro_delete(el, in);
+}
+
+
+/* keymacro_delete():
+ *      Delete the key and all longer keys staring with key, if
+ *      they exists.
+ */
+protected int
+keymacro_delete(EditLine *el, const Char *key)
+{
+
+	if (key[0] == '\0') {
+		(void) fprintf(el->el_errfile,
+		    "keymacro_delete: Null extended-key not allowed.\n");
+		return -1;
+	}
+	if (el->el_keymacro.map == NULL)
+		return 0;
+
+	(void) node__delete(el, &el->el_keymacro.map, key);
+	return 0;
+}
+
+
+/* keymacro_print():
+ *	Print the binding associated with key key.
+ *	Print entire el->el_keymacro.map if null
+ */
+protected void
+keymacro_print(EditLine *el, const Char *key)
+{
+
+	/* do nothing if el->el_keymacro.map is empty and null key specified */
+	if (el->el_keymacro.map == NULL && *key == 0)
+		return;
+
+	el->el_keymacro.buf[0] = '"';
+	if (node_lookup(el, key, el->el_keymacro.map, (size_t)1) <= -1)
+		/* key is not bound */
+		(void) fprintf(el->el_errfile, "Unbound extended key \"" FSTR
+		    "\"\n", key);
+	return;
+}
+
+
+/* node_trav():
+ *	recursively traverses node in tree until match or mismatch is
+ * 	found.  May read in more characters.
+ */
+private int
+node_trav(EditLine *el, keymacro_node_t *ptr, Char *ch, keymacro_value_t *val)
+{
+
+	if (ptr->ch == *ch) {
+		/* match found */
+		if (ptr->next) {
+			/* key not complete so get next char */
+			if (FUN(el,getc)(el, ch) != 1) {/* if EOF or error */
+				val->cmd = ED_END_OF_FILE;
+				return XK_CMD;
+				/* PWP: Pretend we just read an end-of-file */
+			}
+			return node_trav(el, ptr->next, ch, val);
+		} else {
+			*val = ptr->val;
+			if (ptr->type != XK_CMD)
+				*ch = '\0';
+			return ptr->type;
+		}
+	} else {
+		/* no match found here */
+		if (ptr->sibling) {
+			/* try next sibling */
+			return node_trav(el, ptr->sibling, ch, val);
+		} else {
+			/* no next sibling -- mismatch */
+			val->str = NULL;
+			return XK_STR;
+		}
+	}
+}
+
+
+/* node__try():
+ * 	Find a node that matches *str or allocate a new one
+ */
+private int
+node__try(EditLine *el, keymacro_node_t *ptr, const Char *str,
+    keymacro_value_t *val, int ntype)
+{
+
+	if (ptr->ch != *str) {
+		keymacro_node_t *xm;
+
+		for (xm = ptr; xm->sibling != NULL; xm = xm->sibling)
+			if (xm->sibling->ch == *str)
+				break;
+		if (xm->sibling == NULL)
+			xm->sibling = node__get(*str);	/* setup new node */
+		ptr = xm->sibling;
+	}
+	if (*++str == '\0') {
+		/* we're there */
+		if (ptr->next != NULL) {
+			node__put(el, ptr->next);
+				/* lose longer keys with this prefix */
+			ptr->next = NULL;
+		}
+		switch (ptr->type) {
+		case XK_CMD:
+		case XK_NOD:
+			break;
+		case XK_STR:
+		case XK_EXE:
+			if (ptr->val.str)
+				el_free(ptr->val.str);
+			break;
+		default:
+			EL_ABORT((el->el_errfile, "Bad XK_ type %d\n",
+			    ptr->type));
+			break;
+		}
+
+		switch (ptr->type = ntype) {
+		case XK_CMD:
+			ptr->val = *val;
+			break;
+		case XK_STR:
+		case XK_EXE:
+			if ((ptr->val.str = Strdup(val->str)) == NULL)
+				return -1;
+			break;
+		default:
+			EL_ABORT((el->el_errfile, "Bad XK_ type %d\n", ntype));
+			break;
+		}
+	} else {
+		/* still more chars to go */
+		if (ptr->next == NULL)
+			ptr->next = node__get(*str);	/* setup new node */
+		(void) node__try(el, ptr->next, str, val, ntype);
+	}
+	return 0;
+}
+
+
+/* node__delete():
+ *	Delete node that matches str
+ */
+private int
+node__delete(EditLine *el, keymacro_node_t **inptr, const Char *str)
+{
+	keymacro_node_t *ptr;
+	keymacro_node_t *prev_ptr = NULL;
+
+	ptr = *inptr;
+
+	if (ptr->ch != *str) {
+		keymacro_node_t *xm;
+
+		for (xm = ptr; xm->sibling != NULL; xm = xm->sibling)
+			if (xm->sibling->ch == *str)
+				break;
+		if (xm->sibling == NULL)
+			return 0;
+		prev_ptr = xm;
+		ptr = xm->sibling;
+	}
+	if (*++str == '\0') {
+		/* we're there */
+		if (prev_ptr == NULL)
+			*inptr = ptr->sibling;
+		else
+			prev_ptr->sibling = ptr->sibling;
+		ptr->sibling = NULL;
+		node__put(el, ptr);
+		return 1;
+	} else if (ptr->next != NULL &&
+	    node__delete(el, &ptr->next, str) == 1) {
+		if (ptr->next != NULL)
+			return 0;
+		if (prev_ptr == NULL)
+			*inptr = ptr->sibling;
+		else
+			prev_ptr->sibling = ptr->sibling;
+		ptr->sibling = NULL;
+		node__put(el, ptr);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+
+/* node__put():
+ *	Puts a tree of nodes onto free list using free(3).
+ */
+private void
+node__put(EditLine *el, keymacro_node_t *ptr)
+{
+	if (ptr == NULL)
+		return;
+
+	if (ptr->next != NULL) {
+		node__put(el, ptr->next);
+		ptr->next = NULL;
+	}
+	node__put(el, ptr->sibling);
+
+	switch (ptr->type) {
+	case XK_CMD:
+	case XK_NOD:
+		break;
+	case XK_EXE:
+	case XK_STR:
+		if (ptr->val.str != NULL)
+			el_free(ptr->val.str);
+		break;
+	default:
+		EL_ABORT((el->el_errfile, "Bad XK_ type %d\n", ptr->type));
+		break;
+	}
+	el_free(ptr);
+}
+
+
+/* node__get():
+ *	Returns pointer to a keymacro_node_t for ch.
+ */
+private keymacro_node_t *
+node__get(Int ch)
+{
+	keymacro_node_t *ptr;
+
+	ptr = el_malloc(sizeof(*ptr));
+	if (ptr == NULL)
+		return NULL;
+	ptr->ch = ch;
+	ptr->type = XK_NOD;
+	ptr->val.str = NULL;
+	ptr->next = NULL;
+	ptr->sibling = NULL;
+	return ptr;
+}
+
+private void
+node__free(keymacro_node_t *k)
+{
+	if (k == NULL)
+		return;
+	node__free(k->sibling);
+	node__free(k->next);
+	el_free(k);
+}
+
+/* node_lookup():
+ *	look for the str starting at node ptr.
+ *	Print if last node
+ */
+private int
+node_lookup(EditLine *el, const Char *str, keymacro_node_t *ptr, size_t cnt)
+{
+	ssize_t used;
+
+	if (ptr == NULL)
+		return -1;	/* cannot have null ptr */
+
+	if (!str || *str == 0) {
+		/* no more chars in str.  node_enum from here. */
+		(void) node_enum(el, ptr, cnt);
+		return 0;
+	} else {
+		/* If match put this char into el->el_keymacro.buf.  Recurse */
+		if (ptr->ch == *str) {
+			/* match found */
+			used = ct_visual_char(el->el_keymacro.buf + cnt,
+			    KEY_BUFSIZ - cnt, ptr->ch);
+			if (used == -1)
+				return -1; /* ran out of buffer space */
+			if (ptr->next != NULL)
+				/* not yet at leaf */
+				return (node_lookup(el, str + 1, ptr->next,
+				    (size_t)used + cnt));
+			else {
+			    /* next node is null so key should be complete */
+				if (str[1] == 0) {
+					size_t px = cnt + (size_t)used;
+					el->el_keymacro.buf[px] = '"';
+					el->el_keymacro.buf[px + 1] = '\0';
+					keymacro_kprint(el, el->el_keymacro.buf,
+					    &ptr->val, ptr->type);
+					return 0;
+				} else
+					return -1;
+					/* mismatch -- str still has chars */
+			}
+		} else {
+			/* no match found try sibling */
+			if (ptr->sibling)
+				return (node_lookup(el, str, ptr->sibling,
+				    cnt));
+			else
+				return -1;
+		}
+	}
+}
+
+
+/* node_enum():
+ *	Traverse the node printing the characters it is bound in buffer
+ */
+private int
+node_enum(EditLine *el, keymacro_node_t *ptr, size_t cnt)
+{
+        ssize_t used;
+
+	if (cnt >= KEY_BUFSIZ - 5) {	/* buffer too small */
+		el->el_keymacro.buf[++cnt] = '"';
+		el->el_keymacro.buf[++cnt] = '\0';
+		(void) fprintf(el->el_errfile,
+		    "Some extended keys too long for internal print buffer");
+		(void) fprintf(el->el_errfile, " \"" FSTR "...\"\n",
+		    el->el_keymacro.buf);
+		return 0;
+	}
+	if (ptr == NULL) {
+#ifdef DEBUG_EDIT
+		(void) fprintf(el->el_errfile,
+		    "node_enum: BUG!! Null ptr passed\n!");
+#endif
+		return -1;
+	}
+	/* put this char at end of str */
+        used = ct_visual_char(el->el_keymacro.buf + cnt, KEY_BUFSIZ - cnt,
+	    ptr->ch);
+	if (ptr->next == NULL) {
+		/* print this key and function */
+		el->el_keymacro.buf[cnt + (size_t)used   ] = '"';
+		el->el_keymacro.buf[cnt + (size_t)used + 1] = '\0';
+		keymacro_kprint(el, el->el_keymacro.buf, &ptr->val, ptr->type);
+	} else
+		(void) node_enum(el, ptr->next, cnt + (size_t)used);
+
+	/* go to sibling if there is one */
+	if (ptr->sibling)
+		(void) node_enum(el, ptr->sibling, cnt);
+	return 0;
+}
+
+
+/* keymacro_kprint():
+ *	Print the specified key and its associated
+ *	function specified by val
+ */
+protected void
+keymacro_kprint(EditLine *el, const Char *key, keymacro_value_t *val, int ntype)
+{
+	el_bindings_t *fp;
+	char unparsbuf[EL_BUFSIZ];
+	static const char fmt[] = "%-15s->  %s\n";
+
+	if (val != NULL)
+		switch (ntype) {
+		case XK_STR:
+		case XK_EXE:
+			(void) keymacro__decode_str(val->str, unparsbuf,
+			    sizeof(unparsbuf), 
+			    ntype == XK_STR ? "\"\"" : "[]");
+			(void) fprintf(el->el_outfile, fmt,
+			    ct_encode_string(key, &el->el_scratch), unparsbuf);
+			break;
+		case XK_CMD:
+			for (fp = el->el_map.help; fp->name; fp++)
+				if (val->cmd == fp->func) {
+                    ct_wcstombs(unparsbuf, fp->name, sizeof(unparsbuf));
+                    unparsbuf[sizeof(unparsbuf) -1] = '\0';
+					(void) fprintf(el->el_outfile, fmt,
+                        ct_encode_string(key, &el->el_scratch), unparsbuf);
+					break;
+				}
+#ifdef DEBUG_KEY
+			if (fp->name == NULL)
+				(void) fprintf(el->el_outfile,
+				    "BUG! Command not found.\n");
+#endif
+
+			break;
+		default:
+			EL_ABORT((el->el_errfile, "Bad XK_ type %d\n", ntype));
+			break;
+		}
+	else
+		(void) fprintf(el->el_outfile, fmt, ct_encode_string(key,
+		    &el->el_scratch), "no input");
+}
+
+
+#define ADDC(c) \
+	if (b < eb) \
+		*b++ = c; \
+	else \
+		b++
+/* keymacro__decode_str():
+ *	Make a printable version of the ey
+ */
+protected size_t
+keymacro__decode_str(const Char *str, char *buf, size_t len, const char *sep)
+{
+	char *b = buf, *eb = b + len;
+	const Char *p;
+
+	b = buf;
+	if (sep[0] != '\0') {
+		ADDC(sep[0]);
+	}
+	if (*str == '\0') {
+		ADDC('^');
+		ADDC('@');
+		goto add_endsep;
+	}
+	for (p = str; *p != 0; p++) {
+		Char dbuf[VISUAL_WIDTH_MAX];
+		Char *p2 = dbuf;
+		ssize_t l = ct_visual_char(dbuf, VISUAL_WIDTH_MAX, *p);
+		while (l-- > 0) {
+			ssize_t n = ct_encode_char(b, (size_t)(eb - b), *p2++);
+			if (n == -1) /* ran out of space */
+				goto add_endsep;
+			else
+				b += n;
+		}
+	}
+add_endsep:
+	if (sep[0] != '\0' && sep[1] != '\0') {
+		ADDC(sep[1]);
+	}
+	ADDC('\0');
+	if ((size_t)(b - buf) >= len)
+	    buf[len - 1] = '\0';
+	return (size_t)(b - buf);
+}
diff --git a/src/keymacro.h b/src/keymacro.h
new file mode 100644
index 0000000..2445de5
--- /dev/null
+++ b/src/keymacro.h
@@ -0,0 +1,76 @@
+/*	$NetBSD: keymacro.h,v 1.2 2011/07/28 03:44:36 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)key.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.keymacro.h: Key macro header
+ */
+#ifndef _h_el_keymacro
+#define	_h_el_keymacro
+
+typedef union keymacro_value_t {
+	el_action_t	 cmd;	/* If it is a command the #	*/
+	Char		*str;	/* If it is a string...		*/
+} keymacro_value_t;
+
+typedef struct keymacro_node_t keymacro_node_t;
+
+typedef struct el_keymacromacro_t {
+	Char		*buf;	/* Key print buffer		*/
+	keymacro_node_t	*map;	/* Key map			*/
+	keymacro_value_t val;	/* Local conversion buffer	*/
+} el_keymacro_t;
+
+#define	XK_CMD	0
+#define	XK_STR	1
+#define	XK_NOD	2
+#define	XK_EXE	3
+
+protected int keymacro_init(EditLine *);
+protected void keymacro_end(EditLine *);
+protected keymacro_value_t *keymacro_map_cmd(EditLine *, int);
+protected keymacro_value_t *keymacro_map_str(EditLine *, Char *);
+protected void keymacro_reset(EditLine *);
+protected int keymacro_get(EditLine *, Char *, keymacro_value_t *);
+protected void keymacro_add(EditLine *, const Char *, keymacro_value_t *, int);
+protected void keymacro_clear(EditLine *, el_action_t *, const Char *);
+protected int keymacro_delete(EditLine *, const Char *);
+protected void keymacro_print(EditLine *, const Char *);
+protected void keymacro_kprint(EditLine *, const Char *, keymacro_value_t *,
+    int);
+protected size_t keymacro__decode_str(const Char *, char *, size_t,
+    const char *);
+
+#endif /* _h_el_keymacro */
diff --git a/src/makelist b/src/makelist
new file mode 100644
index 0000000..1e95bae
--- /dev/null
+++ b/src/makelist
@@ -0,0 +1,258 @@
+#!/bin/sh -
+#	$NetBSD: makelist,v 1.18 2012/03/21 05:34:54 matt Exp $
+#
+# Copyright (c) 1992, 1993
+#	The Regents of the University of California.  All rights reserved.
+#
+# This code is derived from software contributed to Berkeley by
+# Christos Zoulas of Cornell University.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. Neither the name of the University nor the names of its contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+#	@(#)makelist	5.3 (Berkeley) 6/4/93
+
+# makelist.sh: Automatically generate header files...
+
+USAGE="Usage: $0 -n|-h|-e|-fc|-fh|-bc|-bh|-m <filenames>"
+
+if [ "x$1" = "x" ]
+then
+    echo $USAGE 1>&2
+    exit 1
+fi
+
+FLAG="$1"
+shift
+
+FILES="$@"
+
+case $FLAG in
+
+#	generate foo.h file from foo.c
+#
+-n)
+    cat << _EOF
+#include "config.h"
+#undef WIDECHAR
+#define NARROWCHAR
+#include "${FILES}"
+_EOF
+    ;;
+    
+-h)
+    set - `echo $FILES | sed -e 's/\\./_/g'`
+    hdr="_h_`basename $1`"
+    cat $FILES | $AWK '
+	BEGIN {
+	    printf("/* Automatically generated file, do not edit */\n");
+	    printf("#ifndef %s\n#define %s\n", "'$hdr'", "'$hdr'");
+	}
+	/\(\):/ {
+	    pr = substr($2, 1, 2);
+	    if (pr == "vi" || pr == "em" || pr == "ed") {
+		name = substr($2, 1, length($2) - 3);
+#
+# XXX:	need a space between name and prototype so that -fc and -fh
+#	parsing is much easier
+#
+		printf("protected el_action_t\t%s (EditLine *, Int);\n", name);
+	    }
+	}
+	END {
+	    printf("#endif /* %s */\n", "'$hdr'");
+	}'
+	;;
+
+#	generate help.c from various .c files
+#
+-bc)
+    cat $FILES | $AWK '
+	BEGIN {
+	    printf("/* Automatically generated file, do not edit */\n");
+	    printf("#include \"config.h\"\n#include \"el.h\"\n");
+	    printf("#include \"chartype.h\"\n");
+	    printf("private const struct el_bindings_t el_func_help[] = {\n");
+	    low = "abcdefghijklmnopqrstuvwxyz_";
+	    high = "ABCDEFGHIJKLMNOPQRSTUVWXYZ_";
+	    for (i = 1; i <= length(low); i++)
+		tr[substr(low, i, 1)] = substr(high, i, 1);
+	}
+	/\(\):/ {
+	    pr = substr($2, 1, 2);
+	    if (pr == "vi" || pr == "em" || pr == "ed") {
+		name = substr($2, 1, length($2) - 3);
+		uname = "";
+		fname = "";
+		for (i = 1; i <= length(name); i++) {
+		    s = substr(name, i, 1);
+		    uname = uname tr[s];
+		    if (s == "_")
+			s = "-";
+		    fname = fname s;
+		}
+
+		printf("    { %-30.30s %-30.30s\n","STR(\"" fname "\"),", uname ",");
+		ok = 1;
+	    }
+	}
+	/^ \*/ {
+	    if (ok) {
+		printf("      STR(\"");
+		for (i = 2; i < NF; i++)
+		    printf("%s ", $i);
+		printf("%s\") },\n", $i);
+		ok = 0;
+	    }
+	}
+	END {
+	    printf("};\n");
+	    printf("\nprotected const el_bindings_t* help__get(void)");
+	    printf("{ return el_func_help; }\n");
+	}'
+	;;
+
+#	generate help.h from various .c files
+#
+-bh)
+    $AWK '
+	BEGIN {
+	    printf("/* Automatically generated file, do not edit */\n");
+	    printf("#ifndef _h_help_c\n#define _h_help_c\n");
+	    printf("protected const el_bindings_t *help__get(void);\n");
+	    printf("#endif /* _h_help_c */\n");
+	}' /dev/null
+	;;
+
+#	generate fcns.h from various .h files
+#
+-fh)
+    cat $FILES | $AWK '/el_action_t/ { print $3 }' | \
+    sort | tr '[a-z]' '[A-Z]' | $AWK '
+	BEGIN {
+	    printf("/* Automatically generated file, do not edit */\n");
+	    printf("#ifndef _h_fcns_c\n#define _h_fcns_c\n");
+	    count = 0;
+	}
+	{
+	    printf("#define\t%-30.30s\t%3d\n", $1, count++);
+	}
+	END {
+	    printf("#define\t%-30.30s\t%3d\n", "EL_NUM_FCNS", count);
+
+	    printf("typedef el_action_t (*el_func_t)(EditLine *, Int);");
+	    printf("\nprotected const el_func_t* func__get(void);\n");
+	    printf("#endif /* _h_fcns_c */\n");
+	}'
+	;;
+
+#	generate fcns.c from various .h files
+#
+-fc)
+    cat $FILES | $AWK '/el_action_t/ { print $3 }' | sort | $AWK '
+	BEGIN {
+	    printf("/* Automatically generated file, do not edit */\n");
+	    printf("#include \"config.h\"\n#include \"el.h\"\n");
+	    printf("private const el_func_t el_func[] = {");
+	    maxlen = 80;
+	    needn = 1;
+	    len = 0;
+	}
+	{
+	    clen = 25 + 2;
+	    len += clen;
+	    if (len >= maxlen)
+		needn = 1;
+	    if (needn) {
+		printf("\n    ");
+		needn = 0;
+		len = 4 + clen;
+	    }
+	    s = $1 ",";
+	    printf("%-26.26s ", s);
+	}
+	END {
+	    printf("\n};\n");
+	    printf("\nprotected const el_func_t* func__get(void) { return el_func; }\n");
+	}'
+	;;
+
+#	generate editline.c from various .c files
+#
+-e)
+	echo "$FILES" | tr ' ' '\012' | $AWK '
+	BEGIN {
+	    printf("/* Automatically generated file, do not edit */\n");
+	    printf("#define protected static\n");
+	    printf("#define SCCSID\n");
+	}
+	{
+	    printf("#include \"%s\"\n", $1);
+	}'
+	;;
+
+#	generate man page fragment from various .c files
+#
+-m)
+    cat $FILES | $AWK '
+	BEGIN {
+	    printf(".\\\" Section automatically generated with makelist\n");
+	    printf(".Bl -tag -width 4n\n");
+	}
+	/\(\):/ {
+	    pr = substr($2, 1, 2);
+	    if (pr == "vi" || pr == "em" || pr == "ed") {
+		name = substr($2, 1, length($2) - 3);
+		fname = "";
+		for (i = 1; i <= length(name); i++) {
+		    s = substr(name, i, 1);
+		    if (s == "_")
+			s = "-";
+		    fname = fname s;
+		}
+
+		printf(".It Ic %s\n", fname);
+		ok = 1;
+	    }
+	}
+	/^ \*/ {
+	    if (ok) {
+		for (i = 2; i < NF; i++)
+		    printf("%s ", $i);
+		printf("%s.\n", $i);
+		ok = 0;
+	    }
+	}
+	END {
+	    printf(".El\n");
+	    printf(".\\\" End of section automatically generated with makelist\n");
+	}'
+	;;
+
+*)
+    echo $USAGE 1>&2
+    exit 1
+    ;;
+
+esac
diff --git a/src/map.c b/src/map.c
new file mode 100644
index 0000000..b3e11ba
--- /dev/null
+++ b/src/map.c
@@ -0,0 +1,1422 @@
+/*	$NetBSD: map.c,v 1.33 2013/01/01 15:34:02 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)map.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: map.c,v 1.33 2013/01/01 15:34:02 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * map.c: Editor function definitions
+ */
+#include <stdlib.h>
+#include "el.h"
+
+private void	map_print_key(EditLine *, el_action_t *, const Char *);
+private void	map_print_some_keys(EditLine *, el_action_t *, Int, Int);
+private void	map_print_all_keys(EditLine *);
+private void	map_init_nls(EditLine *);
+private void	map_init_meta(EditLine *);
+
+/* keymap tables ; should be N_KEYS*sizeof(KEYCMD) bytes long */
+
+
+private const el_action_t  el_map_emacs[] = {
+	/*   0 */	EM_SET_MARK,		/* ^@ */
+	/*   1 */	ED_MOVE_TO_BEG,		/* ^A */
+	/*   2 */	ED_PREV_CHAR,		/* ^B */
+	/*   3 */	ED_TTY_SIGINT,		/* ^C */
+	/*   4 */	EM_DELETE_OR_LIST,	/* ^D */
+	/*   5 */	ED_MOVE_TO_END,		/* ^E */
+	/*   6 */	ED_NEXT_CHAR,		/* ^F */
+	/*   7 */	ED_UNASSIGNED,		/* ^G */
+	/*   8 */	EM_DELETE_PREV_CHAR,	/* ^H */
+	/*   9 */	ED_UNASSIGNED,		/* ^I */
+	/*  10 */	ED_NEWLINE,		/* ^J */
+	/*  11 */	ED_KILL_LINE,		/* ^K */
+	/*  12 */	ED_CLEAR_SCREEN,	/* ^L */
+	/*  13 */	ED_NEWLINE,		/* ^M */
+	/*  14 */	ED_NEXT_HISTORY,	/* ^N */
+	/*  15 */	ED_TTY_FLUSH_OUTPUT,	/* ^O */
+	/*  16 */	ED_PREV_HISTORY,	/* ^P */
+	/*  17 */	ED_TTY_START_OUTPUT,	/* ^Q */
+	/*  18 */	ED_REDISPLAY,		/* ^R */
+	/*  19 */	ED_TTY_STOP_OUTPUT,	/* ^S */
+	/*  20 */	ED_TRANSPOSE_CHARS,	/* ^T */
+	/*  21 */	EM_KILL_LINE,		/* ^U */
+	/*  22 */	ED_QUOTED_INSERT,	/* ^V */
+	/*  23 */	EM_KILL_REGION,		/* ^W */
+	/*  24 */	ED_SEQUENCE_LEAD_IN,	/* ^X */
+	/*  25 */	EM_YANK,		/* ^Y */
+	/*  26 */	ED_TTY_SIGTSTP,		/* ^Z */
+	/*  27 */	EM_META_NEXT,		/* ^[ */
+	/*  28 */	ED_TTY_SIGQUIT,		/* ^\ */
+	/*  29 */	ED_TTY_DSUSP,		/* ^] */
+	/*  30 */	ED_UNASSIGNED,		/* ^^ */
+	/*  31 */	ED_UNASSIGNED,		/* ^_ */
+	/*  32 */	ED_INSERT,		/* SPACE */
+	/*  33 */	ED_INSERT,		/* ! */
+	/*  34 */	ED_INSERT,		/* " */
+	/*  35 */	ED_INSERT,		/* # */
+	/*  36 */	ED_INSERT,		/* $ */
+	/*  37 */	ED_INSERT,		/* % */
+	/*  38 */	ED_INSERT,		/* & */
+	/*  39 */	ED_INSERT,		/* ' */
+	/*  40 */	ED_INSERT,		/* ( */
+	/*  41 */	ED_INSERT,		/* ) */
+	/*  42 */	ED_INSERT,		/* * */
+	/*  43 */	ED_INSERT,		/* + */
+	/*  44 */	ED_INSERT,		/* , */
+	/*  45 */	ED_INSERT,		/* - */
+	/*  46 */	ED_INSERT,		/* . */
+	/*  47 */	ED_INSERT,		/* / */
+	/*  48 */	ED_DIGIT,		/* 0 */
+	/*  49 */	ED_DIGIT,		/* 1 */
+	/*  50 */	ED_DIGIT,		/* 2 */
+	/*  51 */	ED_DIGIT,		/* 3 */
+	/*  52 */	ED_DIGIT,		/* 4 */
+	/*  53 */	ED_DIGIT,		/* 5 */
+	/*  54 */	ED_DIGIT,		/* 6 */
+	/*  55 */	ED_DIGIT,		/* 7 */
+	/*  56 */	ED_DIGIT,		/* 8 */
+	/*  57 */	ED_DIGIT,		/* 9 */
+	/*  58 */	ED_INSERT,		/* : */
+	/*  59 */	ED_INSERT,		/* ; */
+	/*  60 */	ED_INSERT,		/* < */
+	/*  61 */	ED_INSERT,		/* = */
+	/*  62 */	ED_INSERT,		/* > */
+	/*  63 */	ED_INSERT,		/* ? */
+	/*  64 */	ED_INSERT,		/* @ */
+	/*  65 */	ED_INSERT,		/* A */
+	/*  66 */	ED_INSERT,		/* B */
+	/*  67 */	ED_INSERT,		/* C */
+	/*  68 */	ED_INSERT,		/* D */
+	/*  69 */	ED_INSERT,		/* E */
+	/*  70 */	ED_INSERT,		/* F */
+	/*  71 */	ED_INSERT,		/* G */
+	/*  72 */	ED_INSERT,		/* H */
+	/*  73 */	ED_INSERT,		/* I */
+	/*  74 */	ED_INSERT,		/* J */
+	/*  75 */	ED_INSERT,		/* K */
+	/*  76 */	ED_INSERT,		/* L */
+	/*  77 */	ED_INSERT,		/* M */
+	/*  78 */	ED_INSERT,		/* N */
+	/*  79 */	ED_INSERT,		/* O */
+	/*  80 */	ED_INSERT,		/* P */
+	/*  81 */	ED_INSERT,		/* Q */
+	/*  82 */	ED_INSERT,		/* R */
+	/*  83 */	ED_INSERT,		/* S */
+	/*  84 */	ED_INSERT,		/* T */
+	/*  85 */	ED_INSERT,		/* U */
+	/*  86 */	ED_INSERT,		/* V */
+	/*  87 */	ED_INSERT,		/* W */
+	/*  88 */	ED_INSERT,		/* X */
+	/*  89 */	ED_INSERT,		/* Y */
+	/*  90 */	ED_INSERT,		/* Z */
+	/*  91 */	ED_INSERT,		/* [ */
+	/*  92 */	ED_INSERT,		/* \ */
+	/*  93 */	ED_INSERT,		/* ] */
+	/*  94 */	ED_INSERT,		/* ^ */
+	/*  95 */	ED_INSERT,		/* _ */
+	/*  96 */	ED_INSERT,		/* ` */
+	/*  97 */	ED_INSERT,		/* a */
+	/*  98 */	ED_INSERT,		/* b */
+	/*  99 */	ED_INSERT,		/* c */
+	/* 100 */	ED_INSERT,		/* d */
+	/* 101 */	ED_INSERT,		/* e */
+	/* 102 */	ED_INSERT,		/* f */
+	/* 103 */	ED_INSERT,		/* g */
+	/* 104 */	ED_INSERT,		/* h */
+	/* 105 */	ED_INSERT,		/* i */
+	/* 106 */	ED_INSERT,		/* j */
+	/* 107 */	ED_INSERT,		/* k */
+	/* 108 */	ED_INSERT,		/* l */
+	/* 109 */	ED_INSERT,		/* m */
+	/* 110 */	ED_INSERT,		/* n */
+	/* 111 */	ED_INSERT,		/* o */
+	/* 112 */	ED_INSERT,		/* p */
+	/* 113 */	ED_INSERT,		/* q */
+	/* 114 */	ED_INSERT,		/* r */
+	/* 115 */	ED_INSERT,		/* s */
+	/* 116 */	ED_INSERT,		/* t */
+	/* 117 */	ED_INSERT,		/* u */
+	/* 118 */	ED_INSERT,		/* v */
+	/* 119 */	ED_INSERT,		/* w */
+	/* 120 */	ED_INSERT,		/* x */
+	/* 121 */	ED_INSERT,		/* y */
+	/* 122 */	ED_INSERT,		/* z */
+	/* 123 */	ED_INSERT,		/* { */
+	/* 124 */	ED_INSERT,		/* | */
+	/* 125 */	ED_INSERT,		/* } */
+	/* 126 */	ED_INSERT,		/* ~ */
+	/* 127 */	EM_DELETE_PREV_CHAR,	/* ^? */
+	/* 128 */	ED_UNASSIGNED,		/* M-^@ */
+	/* 129 */	ED_UNASSIGNED,		/* M-^A */
+	/* 130 */	ED_UNASSIGNED,		/* M-^B */
+	/* 131 */	ED_UNASSIGNED,		/* M-^C */
+	/* 132 */	ED_UNASSIGNED,		/* M-^D */
+	/* 133 */	ED_UNASSIGNED,		/* M-^E */
+	/* 134 */	ED_UNASSIGNED,		/* M-^F */
+	/* 135 */	ED_UNASSIGNED,		/* M-^G */
+	/* 136 */	ED_DELETE_PREV_WORD,	/* M-^H */
+	/* 137 */	ED_UNASSIGNED,		/* M-^I */
+	/* 138 */	ED_UNASSIGNED,		/* M-^J */
+	/* 139 */	ED_UNASSIGNED,		/* M-^K */
+	/* 140 */	ED_CLEAR_SCREEN,	/* M-^L */
+	/* 141 */	ED_UNASSIGNED,		/* M-^M */
+	/* 142 */	ED_UNASSIGNED,		/* M-^N */
+	/* 143 */	ED_UNASSIGNED,		/* M-^O */
+	/* 144 */	ED_UNASSIGNED,		/* M-^P */
+	/* 145 */	ED_UNASSIGNED,		/* M-^Q */
+	/* 146 */	ED_UNASSIGNED,		/* M-^R */
+	/* 147 */	ED_UNASSIGNED,		/* M-^S */
+	/* 148 */	ED_UNASSIGNED,		/* M-^T */
+	/* 149 */	ED_UNASSIGNED,		/* M-^U */
+	/* 150 */	ED_UNASSIGNED,		/* M-^V */
+	/* 151 */	ED_UNASSIGNED,		/* M-^W */
+	/* 152 */	ED_UNASSIGNED,		/* M-^X */
+	/* 153 */	ED_UNASSIGNED,		/* M-^Y */
+	/* 154 */	ED_UNASSIGNED,		/* M-^Z */
+	/* 155 */	ED_UNASSIGNED,		/* M-^[ */
+	/* 156 */	ED_UNASSIGNED,		/* M-^\ */
+	/* 157 */	ED_UNASSIGNED,		/* M-^] */
+	/* 158 */	ED_UNASSIGNED,		/* M-^^ */
+	/* 159 */	EM_COPY_PREV_WORD,	/* M-^_ */
+	/* 160 */	ED_UNASSIGNED,		/* M-SPACE */
+	/* 161 */	ED_UNASSIGNED,		/* M-! */
+	/* 162 */	ED_UNASSIGNED,		/* M-" */
+	/* 163 */	ED_UNASSIGNED,		/* M-# */
+	/* 164 */	ED_UNASSIGNED,		/* M-$ */
+	/* 165 */	ED_UNASSIGNED,		/* M-% */
+	/* 166 */	ED_UNASSIGNED,		/* M-& */
+	/* 167 */	ED_UNASSIGNED,		/* M-' */
+	/* 168 */	ED_UNASSIGNED,		/* M-( */
+	/* 169 */	ED_UNASSIGNED,		/* M-) */
+	/* 170 */	ED_UNASSIGNED,		/* M-* */
+	/* 171 */	ED_UNASSIGNED,		/* M-+ */
+	/* 172 */	ED_UNASSIGNED,		/* M-, */
+	/* 173 */	ED_UNASSIGNED,		/* M-- */
+	/* 174 */	ED_UNASSIGNED,		/* M-. */
+	/* 175 */	ED_UNASSIGNED,		/* M-/ */
+	/* 176 */	ED_ARGUMENT_DIGIT,	/* M-0 */
+	/* 177 */	ED_ARGUMENT_DIGIT,	/* M-1 */
+	/* 178 */	ED_ARGUMENT_DIGIT,	/* M-2 */
+	/* 179 */	ED_ARGUMENT_DIGIT,	/* M-3 */
+	/* 180 */	ED_ARGUMENT_DIGIT,	/* M-4 */
+	/* 181 */	ED_ARGUMENT_DIGIT,	/* M-5 */
+	/* 182 */	ED_ARGUMENT_DIGIT,	/* M-6 */
+	/* 183 */	ED_ARGUMENT_DIGIT,	/* M-7 */
+	/* 184 */	ED_ARGUMENT_DIGIT,	/* M-8 */
+	/* 185 */	ED_ARGUMENT_DIGIT,	/* M-9 */
+	/* 186 */	ED_UNASSIGNED,		/* M-: */
+	/* 187 */	ED_UNASSIGNED,		/* M-; */
+	/* 188 */	ED_UNASSIGNED,		/* M-< */
+	/* 189 */	ED_UNASSIGNED,		/* M-= */
+	/* 190 */	ED_UNASSIGNED,		/* M-> */
+	/* 191 */	ED_UNASSIGNED,		/* M-? */
+	/* 192 */	ED_UNASSIGNED,		/* M-@ */
+	/* 193 */	ED_UNASSIGNED,		/* M-A */
+	/* 194 */	ED_PREV_WORD,		/* M-B */
+	/* 195 */	EM_CAPITOL_CASE,	/* M-C */
+	/* 196 */	EM_DELETE_NEXT_WORD,	/* M-D */
+	/* 197 */	ED_UNASSIGNED,		/* M-E */
+	/* 198 */	EM_NEXT_WORD,		/* M-F */
+	/* 199 */	ED_UNASSIGNED,		/* M-G */
+	/* 200 */	ED_UNASSIGNED,		/* M-H */
+	/* 201 */	ED_UNASSIGNED,		/* M-I */
+	/* 202 */	ED_UNASSIGNED,		/* M-J */
+	/* 203 */	ED_UNASSIGNED,		/* M-K */
+	/* 204 */	EM_LOWER_CASE,		/* M-L */
+	/* 205 */	ED_UNASSIGNED,		/* M-M */
+	/* 206 */	ED_SEARCH_NEXT_HISTORY,	/* M-N */
+	/* 207 */	ED_SEQUENCE_LEAD_IN,	/* M-O */
+	/* 208 */	ED_SEARCH_PREV_HISTORY,	/* M-P */
+	/* 209 */	ED_UNASSIGNED,		/* M-Q */
+	/* 210 */	ED_UNASSIGNED,		/* M-R */
+	/* 211 */	ED_UNASSIGNED,		/* M-S */
+	/* 212 */	ED_UNASSIGNED,		/* M-T */
+	/* 213 */	EM_UPPER_CASE,		/* M-U */
+	/* 214 */	ED_UNASSIGNED,		/* M-V */
+	/* 215 */	EM_COPY_REGION,		/* M-W */
+	/* 216 */	ED_COMMAND,		/* M-X */
+	/* 217 */	ED_UNASSIGNED,		/* M-Y */
+	/* 218 */	ED_UNASSIGNED,		/* M-Z */
+	/* 219 */	ED_SEQUENCE_LEAD_IN,	/* M-[ */
+	/* 220 */	ED_UNASSIGNED,		/* M-\ */
+	/* 221 */	ED_UNASSIGNED,		/* M-] */
+	/* 222 */	ED_UNASSIGNED,		/* M-^ */
+	/* 223 */	ED_UNASSIGNED,		/* M-_ */
+	/* 223 */	ED_UNASSIGNED,		/* M-` */
+	/* 224 */	ED_UNASSIGNED,		/* M-a */
+	/* 225 */	ED_PREV_WORD,		/* M-b */
+	/* 226 */	EM_CAPITOL_CASE,	/* M-c */
+	/* 227 */	EM_DELETE_NEXT_WORD,	/* M-d */
+	/* 228 */	ED_UNASSIGNED,		/* M-e */
+	/* 229 */	EM_NEXT_WORD,		/* M-f */
+	/* 230 */	ED_UNASSIGNED,		/* M-g */
+	/* 231 */	ED_UNASSIGNED,		/* M-h */
+	/* 232 */	ED_UNASSIGNED,		/* M-i */
+	/* 233 */	ED_UNASSIGNED,		/* M-j */
+	/* 234 */	ED_UNASSIGNED,		/* M-k */
+	/* 235 */	EM_LOWER_CASE,		/* M-l */
+	/* 236 */	ED_UNASSIGNED,		/* M-m */
+	/* 237 */	ED_SEARCH_NEXT_HISTORY,	/* M-n */
+	/* 238 */	ED_UNASSIGNED,		/* M-o */
+	/* 239 */	ED_SEARCH_PREV_HISTORY,	/* M-p */
+	/* 240 */	ED_UNASSIGNED,		/* M-q */
+	/* 241 */	ED_UNASSIGNED,		/* M-r */
+	/* 242 */	ED_UNASSIGNED,		/* M-s */
+	/* 243 */	ED_UNASSIGNED,		/* M-t */
+	/* 244 */	EM_UPPER_CASE,		/* M-u */
+	/* 245 */	ED_UNASSIGNED,		/* M-v */
+	/* 246 */	EM_COPY_REGION,		/* M-w */
+	/* 247 */	ED_COMMAND,		/* M-x */
+	/* 248 */	ED_UNASSIGNED,		/* M-y */
+	/* 249 */	ED_UNASSIGNED,		/* M-z */
+	/* 250 */	ED_UNASSIGNED,		/* M-{ */
+	/* 251 */	ED_UNASSIGNED,		/* M-| */
+	/* 252 */	ED_UNASSIGNED,		/* M-} */
+	/* 253 */	ED_UNASSIGNED,		/* M-~ */
+	/* 254 */	ED_DELETE_PREV_WORD	/* M-^? */
+	/* 255 */
+};
+
+
+/*
+ * keymap table for vi.  Each index into above tbl; should be
+ * N_KEYS entries long.  Vi mode uses a sticky-extend to do command mode:
+ * insert mode characters are in the normal keymap, and command mode
+ * in the extended keymap.
+ */
+private const el_action_t  el_map_vi_insert[] = {
+#ifdef KSHVI
+	/*   0 */	ED_UNASSIGNED,		/* ^@ */
+	/*   1 */	ED_INSERT,		/* ^A */
+	/*   2 */	ED_INSERT,		/* ^B */
+	/*   3 */	ED_INSERT,		/* ^C */
+	/*   4 */	VI_LIST_OR_EOF,		/* ^D */
+	/*   5 */	ED_INSERT,		/* ^E */
+	/*   6 */	ED_INSERT,		/* ^F */
+	/*   7 */	ED_INSERT,		/* ^G */
+	/*   8 */	VI_DELETE_PREV_CHAR,	/* ^H */   /* BackSpace key */
+	/*   9 */	ED_INSERT,		/* ^I */   /* Tab Key  */
+	/*  10 */	ED_NEWLINE,		/* ^J */
+	/*  11 */	ED_INSERT,		/* ^K */
+	/*  12 */	ED_INSERT,		/* ^L */
+	/*  13 */	ED_NEWLINE,		/* ^M */
+	/*  14 */	ED_INSERT,		/* ^N */
+	/*  15 */	ED_INSERT,		/* ^O */
+	/*  16 */	ED_INSERT,		/* ^P */
+	/*  17 */	ED_TTY_START_OUTPUT,	/* ^Q */
+	/*  18 */	ED_INSERT,		/* ^R */
+	/*  19 */	ED_TTY_STOP_OUTPUT,	/* ^S */
+	/*  20 */	ED_INSERT,		/* ^T */
+	/*  21 */	VI_KILL_LINE_PREV,	/* ^U */
+	/*  22 */	ED_QUOTED_INSERT,	/* ^V */
+	/*  23 */	ED_DELETE_PREV_WORD,	/* ^W */
+		/* ED_DELETE_PREV_WORD: Only until strt edit pos */
+	/*  24 */	ED_INSERT,		/* ^X */
+	/*  25 */	ED_INSERT,		/* ^Y */
+	/*  26 */	ED_INSERT,		/* ^Z */
+	/*  27 */	VI_COMMAND_MODE,	/* ^[ */  /* [ Esc ] key */
+	/*  28 */	ED_TTY_SIGQUIT,		/* ^\ */
+	/*  29 */	ED_INSERT,		/* ^] */
+	/*  30 */	ED_INSERT,		/* ^^ */
+	/*  31 */	ED_INSERT,		/* ^_ */
+#else /* !KSHVI */
+				/*
+				 * NOTE: These mappings do NOT Correspond well
+				 * to the KSH VI editing assignments.
+				 * On the other and they are convenient and
+				 * many people have have gotten used to them.
+				 */
+	/*   0 */	ED_UNASSIGNED,		/* ^@ */
+	/*   1 */	ED_MOVE_TO_BEG,		/* ^A */
+	/*   2 */	ED_PREV_CHAR,		/* ^B */
+	/*   3 */	ED_TTY_SIGINT,		/* ^C */
+	/*   4 */	VI_LIST_OR_EOF,		/* ^D */
+	/*   5 */	ED_MOVE_TO_END,		/* ^E */
+	/*   6 */	ED_NEXT_CHAR,		/* ^F */
+	/*   7 */	ED_UNASSIGNED,		/* ^G */
+	/*   8 */	VI_DELETE_PREV_CHAR,	/* ^H */   /* BackSpace key */
+	/*   9 */	ED_UNASSIGNED,		/* ^I */   /* Tab Key */
+	/*  10 */	ED_NEWLINE,		/* ^J */
+	/*  11 */	ED_KILL_LINE,		/* ^K */
+	/*  12 */	ED_CLEAR_SCREEN,	/* ^L */
+	/*  13 */	ED_NEWLINE,		/* ^M */
+	/*  14 */	ED_NEXT_HISTORY,	/* ^N */
+	/*  15 */	ED_TTY_FLUSH_OUTPUT,	/* ^O */
+	/*  16 */	ED_PREV_HISTORY,	/* ^P */
+	/*  17 */	ED_TTY_START_OUTPUT,	/* ^Q */
+	/*  18 */	ED_REDISPLAY,		/* ^R */
+	/*  19 */	ED_TTY_STOP_OUTPUT,	/* ^S */
+	/*  20 */	ED_TRANSPOSE_CHARS,	/* ^T */
+	/*  21 */	VI_KILL_LINE_PREV,	/* ^U */
+	/*  22 */	ED_QUOTED_INSERT,	/* ^V */
+	/*  23 */	ED_DELETE_PREV_WORD,	/* ^W */
+	/*  24 */	ED_UNASSIGNED,		/* ^X */
+	/*  25 */	ED_TTY_DSUSP,		/* ^Y */
+	/*  26 */	ED_TTY_SIGTSTP,		/* ^Z */
+	/*  27 */	VI_COMMAND_MODE,	/* ^[ */
+	/*  28 */	ED_TTY_SIGQUIT,		/* ^\ */
+	/*  29 */	ED_UNASSIGNED,		/* ^] */
+	/*  30 */	ED_UNASSIGNED,		/* ^^ */
+	/*  31 */	ED_UNASSIGNED,		/* ^_ */
+#endif  /* KSHVI */
+	/*  32 */	ED_INSERT,		/* SPACE */
+	/*  33 */	ED_INSERT,		/* ! */
+	/*  34 */	ED_INSERT,		/* " */
+	/*  35 */	ED_INSERT,		/* # */
+	/*  36 */	ED_INSERT,		/* $ */
+	/*  37 */	ED_INSERT,		/* % */
+	/*  38 */	ED_INSERT,		/* & */
+	/*  39 */	ED_INSERT,		/* ' */
+	/*  40 */	ED_INSERT,		/* ( */
+	/*  41 */	ED_INSERT,		/* ) */
+	/*  42 */	ED_INSERT,		/* * */
+	/*  43 */	ED_INSERT,		/* + */
+	/*  44 */	ED_INSERT,		/* , */
+	/*  45 */	ED_INSERT,		/* - */
+	/*  46 */	ED_INSERT,		/* . */
+	/*  47 */	ED_INSERT,		/* / */
+	/*  48 */	ED_INSERT,		/* 0 */
+	/*  49 */	ED_INSERT,		/* 1 */
+	/*  50 */	ED_INSERT,		/* 2 */
+	/*  51 */	ED_INSERT,		/* 3 */
+	/*  52 */	ED_INSERT,		/* 4 */
+	/*  53 */	ED_INSERT,		/* 5 */
+	/*  54 */	ED_INSERT,		/* 6 */
+	/*  55 */	ED_INSERT,		/* 7 */
+	/*  56 */	ED_INSERT,		/* 8 */
+	/*  57 */	ED_INSERT,		/* 9 */
+	/*  58 */	ED_INSERT,		/* : */
+	/*  59 */	ED_INSERT,		/* ; */
+	/*  60 */	ED_INSERT,		/* < */
+	/*  61 */	ED_INSERT,		/* = */
+	/*  62 */	ED_INSERT,		/* > */
+	/*  63 */	ED_INSERT,		/* ? */
+	/*  64 */	ED_INSERT,		/* @ */
+	/*  65 */	ED_INSERT,		/* A */
+	/*  66 */	ED_INSERT,		/* B */
+	/*  67 */	ED_INSERT,		/* C */
+	/*  68 */	ED_INSERT,		/* D */
+	/*  69 */	ED_INSERT,		/* E */
+	/*  70 */	ED_INSERT,		/* F */
+	/*  71 */	ED_INSERT,		/* G */
+	/*  72 */	ED_INSERT,		/* H */
+	/*  73 */	ED_INSERT,		/* I */
+	/*  74 */	ED_INSERT,		/* J */
+	/*  75 */	ED_INSERT,		/* K */
+	/*  76 */	ED_INSERT,		/* L */
+	/*  77 */	ED_INSERT,		/* M */
+	/*  78 */	ED_INSERT,		/* N */
+	/*  79 */	ED_INSERT,		/* O */
+	/*  80 */	ED_INSERT,		/* P */
+	/*  81 */	ED_INSERT,		/* Q */
+	/*  82 */	ED_INSERT,		/* R */
+	/*  83 */	ED_INSERT,		/* S */
+	/*  84 */	ED_INSERT,		/* T */
+	/*  85 */	ED_INSERT,		/* U */
+	/*  86 */	ED_INSERT,		/* V */
+	/*  87 */	ED_INSERT,		/* W */
+	/*  88 */	ED_INSERT,		/* X */
+	/*  89 */	ED_INSERT,		/* Y */
+	/*  90 */	ED_INSERT,		/* Z */
+	/*  91 */	ED_INSERT,		/* [ */
+	/*  92 */	ED_INSERT,		/* \ */
+	/*  93 */	ED_INSERT,		/* ] */
+	/*  94 */	ED_INSERT,		/* ^ */
+	/*  95 */	ED_INSERT,		/* _ */
+	/*  96 */	ED_INSERT,		/* ` */
+	/*  97 */	ED_INSERT,		/* a */
+	/*  98 */	ED_INSERT,		/* b */
+	/*  99 */	ED_INSERT,		/* c */
+	/* 100 */	ED_INSERT,		/* d */
+	/* 101 */	ED_INSERT,		/* e */
+	/* 102 */	ED_INSERT,		/* f */
+	/* 103 */	ED_INSERT,		/* g */
+	/* 104 */	ED_INSERT,		/* h */
+	/* 105 */	ED_INSERT,		/* i */
+	/* 106 */	ED_INSERT,		/* j */
+	/* 107 */	ED_INSERT,		/* k */
+	/* 108 */	ED_INSERT,		/* l */
+	/* 109 */	ED_INSERT,		/* m */
+	/* 110 */	ED_INSERT,		/* n */
+	/* 111 */	ED_INSERT,		/* o */
+	/* 112 */	ED_INSERT,		/* p */
+	/* 113 */	ED_INSERT,		/* q */
+	/* 114 */	ED_INSERT,		/* r */
+	/* 115 */	ED_INSERT,		/* s */
+	/* 116 */	ED_INSERT,		/* t */
+	/* 117 */	ED_INSERT,		/* u */
+	/* 118 */	ED_INSERT,		/* v */
+	/* 119 */	ED_INSERT,		/* w */
+	/* 120 */	ED_INSERT,		/* x */
+	/* 121 */	ED_INSERT,		/* y */
+	/* 122 */	ED_INSERT,		/* z */
+	/* 123 */	ED_INSERT,		/* { */
+	/* 124 */	ED_INSERT,		/* | */
+	/* 125 */	ED_INSERT,		/* } */
+	/* 126 */	ED_INSERT,		/* ~ */
+	/* 127 */	VI_DELETE_PREV_CHAR,	/* ^? */
+	/* 128 */	ED_INSERT,		/* M-^@ */
+	/* 129 */	ED_INSERT,		/* M-^A */
+	/* 130 */	ED_INSERT,		/* M-^B */
+	/* 131 */	ED_INSERT,		/* M-^C */
+	/* 132 */	ED_INSERT,		/* M-^D */
+	/* 133 */	ED_INSERT,		/* M-^E */
+	/* 134 */	ED_INSERT,		/* M-^F */
+	/* 135 */	ED_INSERT,		/* M-^G */
+	/* 136 */	ED_INSERT,		/* M-^H */
+	/* 137 */	ED_INSERT,		/* M-^I */
+	/* 138 */	ED_INSERT,		/* M-^J */
+	/* 139 */	ED_INSERT,		/* M-^K */
+	/* 140 */	ED_INSERT,		/* M-^L */
+	/* 141 */	ED_INSERT,		/* M-^M */
+	/* 142 */	ED_INSERT,		/* M-^N */
+	/* 143 */	ED_INSERT,		/* M-^O */
+	/* 144 */	ED_INSERT,		/* M-^P */
+	/* 145 */	ED_INSERT,		/* M-^Q */
+	/* 146 */	ED_INSERT,		/* M-^R */
+	/* 147 */	ED_INSERT,		/* M-^S */
+	/* 148 */	ED_INSERT,		/* M-^T */
+	/* 149 */	ED_INSERT,		/* M-^U */
+	/* 150 */	ED_INSERT,		/* M-^V */
+	/* 151 */	ED_INSERT,		/* M-^W */
+	/* 152 */	ED_INSERT,		/* M-^X */
+	/* 153 */	ED_INSERT,		/* M-^Y */
+	/* 154 */	ED_INSERT,		/* M-^Z */
+	/* 155 */	ED_INSERT,		/* M-^[ */
+	/* 156 */	ED_INSERT,		/* M-^\ */
+	/* 157 */	ED_INSERT,		/* M-^] */
+	/* 158 */	ED_INSERT,		/* M-^^ */
+	/* 159 */	ED_INSERT,		/* M-^_ */
+	/* 160 */	ED_INSERT,		/* M-SPACE */
+	/* 161 */	ED_INSERT,		/* M-! */
+	/* 162 */	ED_INSERT,		/* M-" */
+	/* 163 */	ED_INSERT,		/* M-# */
+	/* 164 */	ED_INSERT,		/* M-$ */
+	/* 165 */	ED_INSERT,		/* M-% */
+	/* 166 */	ED_INSERT,		/* M-& */
+	/* 167 */	ED_INSERT,		/* M-' */
+	/* 168 */	ED_INSERT,		/* M-( */
+	/* 169 */	ED_INSERT,		/* M-) */
+	/* 170 */	ED_INSERT,		/* M-* */
+	/* 171 */	ED_INSERT,		/* M-+ */
+	/* 172 */	ED_INSERT,		/* M-, */
+	/* 173 */	ED_INSERT,		/* M-- */
+	/* 174 */	ED_INSERT,		/* M-. */
+	/* 175 */	ED_INSERT,		/* M-/ */
+	/* 176 */	ED_INSERT,		/* M-0 */
+	/* 177 */	ED_INSERT,		/* M-1 */
+	/* 178 */	ED_INSERT,		/* M-2 */
+	/* 179 */	ED_INSERT,		/* M-3 */
+	/* 180 */	ED_INSERT,		/* M-4 */
+	/* 181 */	ED_INSERT,		/* M-5 */
+	/* 182 */	ED_INSERT,		/* M-6 */
+	/* 183 */	ED_INSERT,		/* M-7 */
+	/* 184 */	ED_INSERT,		/* M-8 */
+	/* 185 */	ED_INSERT,		/* M-9 */
+	/* 186 */	ED_INSERT,		/* M-: */
+	/* 187 */	ED_INSERT,		/* M-; */
+	/* 188 */	ED_INSERT,		/* M-< */
+	/* 189 */	ED_INSERT,		/* M-= */
+	/* 190 */	ED_INSERT,		/* M-> */
+	/* 191 */	ED_INSERT,		/* M-? */
+	/* 192 */	ED_INSERT,		/* M-@ */
+	/* 193 */	ED_INSERT,		/* M-A */
+	/* 194 */	ED_INSERT,		/* M-B */
+	/* 195 */	ED_INSERT,		/* M-C */
+	/* 196 */	ED_INSERT,		/* M-D */
+	/* 197 */	ED_INSERT,		/* M-E */
+	/* 198 */	ED_INSERT,		/* M-F */
+	/* 199 */	ED_INSERT,		/* M-G */
+	/* 200 */	ED_INSERT,		/* M-H */
+	/* 201 */	ED_INSERT,		/* M-I */
+	/* 202 */	ED_INSERT,		/* M-J */
+	/* 203 */	ED_INSERT,		/* M-K */
+	/* 204 */	ED_INSERT,		/* M-L */
+	/* 205 */	ED_INSERT,		/* M-M */
+	/* 206 */	ED_INSERT,		/* M-N */
+	/* 207 */	ED_INSERT,		/* M-O */
+	/* 208 */	ED_INSERT,		/* M-P */
+	/* 209 */	ED_INSERT,		/* M-Q */
+	/* 210 */	ED_INSERT,		/* M-R */
+	/* 211 */	ED_INSERT,		/* M-S */
+	/* 212 */	ED_INSERT,		/* M-T */
+	/* 213 */	ED_INSERT,		/* M-U */
+	/* 214 */	ED_INSERT,		/* M-V */
+	/* 215 */	ED_INSERT,		/* M-W */
+	/* 216 */	ED_INSERT,		/* M-X */
+	/* 217 */	ED_INSERT,		/* M-Y */
+	/* 218 */	ED_INSERT,		/* M-Z */
+	/* 219 */	ED_INSERT,		/* M-[ */
+	/* 220 */	ED_INSERT,		/* M-\ */
+	/* 221 */	ED_INSERT,		/* M-] */
+	/* 222 */	ED_INSERT,		/* M-^ */
+	/* 223 */	ED_INSERT,		/* M-_ */
+	/* 224 */	ED_INSERT,		/* M-` */
+	/* 225 */	ED_INSERT,		/* M-a */
+	/* 226 */	ED_INSERT,		/* M-b */
+	/* 227 */	ED_INSERT,		/* M-c */
+	/* 228 */	ED_INSERT,		/* M-d */
+	/* 229 */	ED_INSERT,		/* M-e */
+	/* 230 */	ED_INSERT,		/* M-f */
+	/* 231 */	ED_INSERT,		/* M-g */
+	/* 232 */	ED_INSERT,		/* M-h */
+	/* 233 */	ED_INSERT,		/* M-i */
+	/* 234 */	ED_INSERT,		/* M-j */
+	/* 235 */	ED_INSERT,		/* M-k */
+	/* 236 */	ED_INSERT,		/* M-l */
+	/* 237 */	ED_INSERT,		/* M-m */
+	/* 238 */	ED_INSERT,		/* M-n */
+	/* 239 */	ED_INSERT,		/* M-o */
+	/* 240 */	ED_INSERT,		/* M-p */
+	/* 241 */	ED_INSERT,		/* M-q */
+	/* 242 */	ED_INSERT,		/* M-r */
+	/* 243 */	ED_INSERT,		/* M-s */
+	/* 244 */	ED_INSERT,		/* M-t */
+	/* 245 */	ED_INSERT,		/* M-u */
+	/* 246 */	ED_INSERT,		/* M-v */
+	/* 247 */	ED_INSERT,		/* M-w */
+	/* 248 */	ED_INSERT,		/* M-x */
+	/* 249 */	ED_INSERT,		/* M-y */
+	/* 250 */	ED_INSERT,		/* M-z */
+	/* 251 */	ED_INSERT,		/* M-{ */
+	/* 252 */	ED_INSERT,		/* M-| */
+	/* 253 */	ED_INSERT,		/* M-} */
+	/* 254 */	ED_INSERT,		/* M-~ */
+	/* 255 */	ED_INSERT		/* M-^? */
+};
+
+private const el_action_t el_map_vi_command[] = {
+	/*   0 */	ED_UNASSIGNED,		/* ^@ */
+	/*   1 */	ED_MOVE_TO_BEG,		/* ^A */
+	/*   2 */	ED_UNASSIGNED,		/* ^B */
+	/*   3 */	ED_TTY_SIGINT,		/* ^C */
+	/*   4 */	ED_UNASSIGNED,		/* ^D */
+	/*   5 */	ED_MOVE_TO_END,		/* ^E */
+	/*   6 */	ED_UNASSIGNED,		/* ^F */
+	/*   7 */	ED_UNASSIGNED,		/* ^G */
+	/*   8 */	ED_DELETE_PREV_CHAR,	/* ^H */
+	/*   9 */	ED_UNASSIGNED,		/* ^I */
+	/*  10 */	ED_NEWLINE,		/* ^J */
+	/*  11 */	ED_KILL_LINE,		/* ^K */
+	/*  12 */	ED_CLEAR_SCREEN,	/* ^L */
+	/*  13 */	ED_NEWLINE,		/* ^M */
+	/*  14 */	ED_NEXT_HISTORY,	/* ^N */
+	/*  15 */	ED_TTY_FLUSH_OUTPUT,	/* ^O */
+	/*  16 */	ED_PREV_HISTORY,	/* ^P */
+	/*  17 */	ED_TTY_START_OUTPUT,	/* ^Q */
+	/*  18 */	ED_REDISPLAY,		/* ^R */
+	/*  19 */	ED_TTY_STOP_OUTPUT,	/* ^S */
+	/*  20 */	ED_UNASSIGNED,		/* ^T */
+	/*  21 */	VI_KILL_LINE_PREV,	/* ^U */
+	/*  22 */	ED_UNASSIGNED,		/* ^V */
+	/*  23 */	ED_DELETE_PREV_WORD,	/* ^W */
+	/*  24 */	ED_UNASSIGNED,		/* ^X */
+	/*  25 */	ED_UNASSIGNED,		/* ^Y */
+	/*  26 */	ED_UNASSIGNED,		/* ^Z */
+	/*  27 */	EM_META_NEXT,		/* ^[ */
+	/*  28 */	ED_TTY_SIGQUIT,		/* ^\ */
+	/*  29 */	ED_UNASSIGNED,		/* ^] */
+	/*  30 */	ED_UNASSIGNED,		/* ^^ */
+	/*  31 */	ED_UNASSIGNED,		/* ^_ */
+	/*  32 */	ED_NEXT_CHAR,		/* SPACE */
+	/*  33 */	ED_UNASSIGNED,		/* ! */
+	/*  34 */	ED_UNASSIGNED,		/* " */
+	/*  35 */	VI_COMMENT_OUT,		/* # */
+	/*  36 */	ED_MOVE_TO_END,		/* $ */
+	/*  37 */	VI_MATCH,		/* % */
+	/*  38 */	ED_UNASSIGNED,		/* & */
+	/*  39 */	ED_UNASSIGNED,		/* ' */
+	/*  40 */	ED_UNASSIGNED,		/* ( */
+	/*  41 */	ED_UNASSIGNED,		/* ) */
+	/*  42 */	ED_UNASSIGNED,		/* * */
+	/*  43 */	ED_NEXT_HISTORY,	/* + */
+	/*  44 */	VI_REPEAT_PREV_CHAR,	/* , */
+	/*  45 */	ED_PREV_HISTORY,	/* - */
+	/*  46 */	VI_REDO,		/* . */
+	/*  47 */	VI_SEARCH_PREV,		/* / */
+	/*  48 */	VI_ZERO,		/* 0 */
+	/*  49 */	ED_ARGUMENT_DIGIT,	/* 1 */
+	/*  50 */	ED_ARGUMENT_DIGIT,	/* 2 */
+	/*  51 */	ED_ARGUMENT_DIGIT,	/* 3 */
+	/*  52 */	ED_ARGUMENT_DIGIT,	/* 4 */
+	/*  53 */	ED_ARGUMENT_DIGIT,	/* 5 */
+	/*  54 */	ED_ARGUMENT_DIGIT,	/* 6 */
+	/*  55 */	ED_ARGUMENT_DIGIT,	/* 7 */
+	/*  56 */	ED_ARGUMENT_DIGIT,	/* 8 */
+	/*  57 */	ED_ARGUMENT_DIGIT,	/* 9 */
+	/*  58 */	ED_COMMAND,		/* : */
+	/*  59 */	VI_REPEAT_NEXT_CHAR,	/* ; */
+	/*  60 */	ED_UNASSIGNED,		/* < */
+	/*  61 */	ED_UNASSIGNED,		/* = */
+	/*  62 */	ED_UNASSIGNED,		/* > */
+	/*  63 */	VI_SEARCH_NEXT,		/* ? */
+	/*  64 */	VI_ALIAS,		/* @ */
+	/*  65 */	VI_ADD_AT_EOL,		/* A */
+	/*  66 */	VI_PREV_BIG_WORD,	/* B */
+	/*  67 */	VI_CHANGE_TO_EOL,	/* C */
+	/*  68 */	ED_KILL_LINE,		/* D */
+	/*  69 */	VI_END_BIG_WORD,	/* E */
+	/*  70 */	VI_PREV_CHAR,		/* F */
+	/*  71 */	VI_TO_HISTORY_LINE,	/* G */
+	/*  72 */	ED_UNASSIGNED,		/* H */
+	/*  73 */	VI_INSERT_AT_BOL,	/* I */
+	/*  74 */	ED_SEARCH_NEXT_HISTORY,	/* J */
+	/*  75 */	ED_SEARCH_PREV_HISTORY,	/* K */
+	/*  76 */	ED_UNASSIGNED,		/* L */
+	/*  77 */	ED_UNASSIGNED,		/* M */
+	/*  78 */	VI_REPEAT_SEARCH_PREV,	/* N */
+	/*  79 */	ED_SEQUENCE_LEAD_IN,	/* O */
+	/*  80 */	VI_PASTE_PREV,		/* P */
+	/*  81 */	ED_UNASSIGNED,		/* Q */
+	/*  82 */	VI_REPLACE_MODE,	/* R */
+	/*  83 */	VI_SUBSTITUTE_LINE,	/* S */
+	/*  84 */	VI_TO_PREV_CHAR,	/* T */
+	/*  85 */	VI_UNDO_LINE,		/* U */
+	/*  86 */	ED_UNASSIGNED,		/* V */
+	/*  87 */	VI_NEXT_BIG_WORD,	/* W */
+	/*  88 */	ED_DELETE_PREV_CHAR,	/* X */
+	/*  89 */	VI_YANK_END,		/* Y */
+	/*  90 */	ED_UNASSIGNED,		/* Z */
+	/*  91 */	ED_SEQUENCE_LEAD_IN,	/* [ */
+	/*  92 */	ED_UNASSIGNED,		/* \ */
+	/*  93 */	ED_UNASSIGNED,		/* ] */
+	/*  94 */	ED_MOVE_TO_BEG,		/* ^ */
+	/*  95 */	VI_HISTORY_WORD,	/* _ */
+	/*  96 */	ED_UNASSIGNED,		/* ` */
+	/*  97 */	VI_ADD,			/* a */
+	/*  98 */	VI_PREV_WORD,		/* b */
+	/*  99 */	VI_CHANGE_META,		/* c */
+	/* 100 */	VI_DELETE_META,		/* d */
+	/* 101 */	VI_END_WORD,		/* e */
+	/* 102 */	VI_NEXT_CHAR,		/* f */
+	/* 103 */	ED_UNASSIGNED,		/* g */
+	/* 104 */	ED_PREV_CHAR,		/* h */
+	/* 105 */	VI_INSERT,		/* i */
+	/* 106 */	ED_NEXT_HISTORY,	/* j */
+	/* 107 */	ED_PREV_HISTORY,	/* k */
+	/* 108 */	ED_NEXT_CHAR,		/* l */
+	/* 109 */	ED_UNASSIGNED,		/* m */
+	/* 110 */	VI_REPEAT_SEARCH_NEXT,	/* n */
+	/* 111 */	ED_UNASSIGNED,		/* o */
+	/* 112 */	VI_PASTE_NEXT,		/* p */
+	/* 113 */	ED_UNASSIGNED,		/* q */
+	/* 114 */	VI_REPLACE_CHAR,	/* r */
+	/* 115 */	VI_SUBSTITUTE_CHAR,	/* s */
+	/* 116 */	VI_TO_NEXT_CHAR,	/* t */
+	/* 117 */	VI_UNDO,		/* u */
+	/* 118 */	VI_HISTEDIT,		/* v */
+	/* 119 */	VI_NEXT_WORD,		/* w */
+	/* 120 */	ED_DELETE_NEXT_CHAR,	/* x */
+	/* 121 */	VI_YANK,		/* y */
+	/* 122 */	ED_UNASSIGNED,		/* z */
+	/* 123 */	ED_UNASSIGNED,		/* { */
+	/* 124 */	VI_TO_COLUMN,		/* | */
+	/* 125 */	ED_UNASSIGNED,		/* } */
+	/* 126 */	VI_CHANGE_CASE,		/* ~ */
+	/* 127 */	ED_DELETE_PREV_CHAR,	/* ^? */
+	/* 128 */	ED_UNASSIGNED,		/* M-^@ */
+	/* 129 */	ED_UNASSIGNED,		/* M-^A */
+	/* 130 */	ED_UNASSIGNED,		/* M-^B */
+	/* 131 */	ED_UNASSIGNED,		/* M-^C */
+	/* 132 */	ED_UNASSIGNED,		/* M-^D */
+	/* 133 */	ED_UNASSIGNED,		/* M-^E */
+	/* 134 */	ED_UNASSIGNED,		/* M-^F */
+	/* 135 */	ED_UNASSIGNED,		/* M-^G */
+	/* 136 */	ED_UNASSIGNED,		/* M-^H */
+	/* 137 */	ED_UNASSIGNED,		/* M-^I */
+	/* 138 */	ED_UNASSIGNED,		/* M-^J */
+	/* 139 */	ED_UNASSIGNED,		/* M-^K */
+	/* 140 */	ED_UNASSIGNED,		/* M-^L */
+	/* 141 */	ED_UNASSIGNED,		/* M-^M */
+	/* 142 */	ED_UNASSIGNED,		/* M-^N */
+	/* 143 */	ED_UNASSIGNED,		/* M-^O */
+	/* 144 */	ED_UNASSIGNED,		/* M-^P */
+	/* 145 */	ED_UNASSIGNED,		/* M-^Q */
+	/* 146 */	ED_UNASSIGNED,		/* M-^R */
+	/* 147 */	ED_UNASSIGNED,		/* M-^S */
+	/* 148 */	ED_UNASSIGNED,		/* M-^T */
+	/* 149 */	ED_UNASSIGNED,		/* M-^U */
+	/* 150 */	ED_UNASSIGNED,		/* M-^V */
+	/* 151 */	ED_UNASSIGNED,		/* M-^W */
+	/* 152 */	ED_UNASSIGNED,		/* M-^X */
+	/* 153 */	ED_UNASSIGNED,		/* M-^Y */
+	/* 154 */	ED_UNASSIGNED,		/* M-^Z */
+	/* 155 */	ED_UNASSIGNED,		/* M-^[ */
+	/* 156 */	ED_UNASSIGNED,		/* M-^\ */
+	/* 157 */	ED_UNASSIGNED,		/* M-^] */
+	/* 158 */	ED_UNASSIGNED,		/* M-^^ */
+	/* 159 */	ED_UNASSIGNED,		/* M-^_ */
+	/* 160 */	ED_UNASSIGNED,		/* M-SPACE */
+	/* 161 */	ED_UNASSIGNED,		/* M-! */
+	/* 162 */	ED_UNASSIGNED,		/* M-" */
+	/* 163 */	ED_UNASSIGNED,		/* M-# */
+	/* 164 */	ED_UNASSIGNED,		/* M-$ */
+	/* 165 */	ED_UNASSIGNED,		/* M-% */
+	/* 166 */	ED_UNASSIGNED,		/* M-& */
+	/* 167 */	ED_UNASSIGNED,		/* M-' */
+	/* 168 */	ED_UNASSIGNED,		/* M-( */
+	/* 169 */	ED_UNASSIGNED,		/* M-) */
+	/* 170 */	ED_UNASSIGNED,		/* M-* */
+	/* 171 */	ED_UNASSIGNED,		/* M-+ */
+	/* 172 */	ED_UNASSIGNED,		/* M-, */
+	/* 173 */	ED_UNASSIGNED,		/* M-- */
+	/* 174 */	ED_UNASSIGNED,		/* M-. */
+	/* 175 */	ED_UNASSIGNED,		/* M-/ */
+	/* 176 */	ED_UNASSIGNED,		/* M-0 */
+	/* 177 */	ED_UNASSIGNED,		/* M-1 */
+	/* 178 */	ED_UNASSIGNED,		/* M-2 */
+	/* 179 */	ED_UNASSIGNED,		/* M-3 */
+	/* 180 */	ED_UNASSIGNED,		/* M-4 */
+	/* 181 */	ED_UNASSIGNED,		/* M-5 */
+	/* 182 */	ED_UNASSIGNED,		/* M-6 */
+	/* 183 */	ED_UNASSIGNED,		/* M-7 */
+	/* 184 */	ED_UNASSIGNED,		/* M-8 */
+	/* 185 */	ED_UNASSIGNED,		/* M-9 */
+	/* 186 */	ED_UNASSIGNED,		/* M-: */
+	/* 187 */	ED_UNASSIGNED,		/* M-; */
+	/* 188 */	ED_UNASSIGNED,		/* M-< */
+	/* 189 */	ED_UNASSIGNED,		/* M-= */
+	/* 190 */	ED_UNASSIGNED,		/* M-> */
+	/* 191 */	ED_UNASSIGNED,		/* M-? */
+	/* 192 */	ED_UNASSIGNED,		/* M-@ */
+	/* 193 */	ED_UNASSIGNED,		/* M-A */
+	/* 194 */	ED_UNASSIGNED,		/* M-B */
+	/* 195 */	ED_UNASSIGNED,		/* M-C */
+	/* 196 */	ED_UNASSIGNED,		/* M-D */
+	/* 197 */	ED_UNASSIGNED,		/* M-E */
+	/* 198 */	ED_UNASSIGNED,		/* M-F */
+	/* 199 */	ED_UNASSIGNED,		/* M-G */
+	/* 200 */	ED_UNASSIGNED,		/* M-H */
+	/* 201 */	ED_UNASSIGNED,		/* M-I */
+	/* 202 */	ED_UNASSIGNED,		/* M-J */
+	/* 203 */	ED_UNASSIGNED,		/* M-K */
+	/* 204 */	ED_UNASSIGNED,		/* M-L */
+	/* 205 */	ED_UNASSIGNED,		/* M-M */
+	/* 206 */	ED_UNASSIGNED,		/* M-N */
+	/* 207 */	ED_SEQUENCE_LEAD_IN,	/* M-O */
+	/* 208 */	ED_UNASSIGNED,		/* M-P */
+	/* 209 */	ED_UNASSIGNED,		/* M-Q */
+	/* 210 */	ED_UNASSIGNED,		/* M-R */
+	/* 211 */	ED_UNASSIGNED,		/* M-S */
+	/* 212 */	ED_UNASSIGNED,		/* M-T */
+	/* 213 */	ED_UNASSIGNED,		/* M-U */
+	/* 214 */	ED_UNASSIGNED,		/* M-V */
+	/* 215 */	ED_UNASSIGNED,		/* M-W */
+	/* 216 */	ED_UNASSIGNED,		/* M-X */
+	/* 217 */	ED_UNASSIGNED,		/* M-Y */
+	/* 218 */	ED_UNASSIGNED,		/* M-Z */
+	/* 219 */	ED_SEQUENCE_LEAD_IN,	/* M-[ */
+	/* 220 */	ED_UNASSIGNED,		/* M-\ */
+	/* 221 */	ED_UNASSIGNED,		/* M-] */
+	/* 222 */	ED_UNASSIGNED,		/* M-^ */
+	/* 223 */	ED_UNASSIGNED,		/* M-_ */
+	/* 224 */	ED_UNASSIGNED,		/* M-` */
+	/* 225 */	ED_UNASSIGNED,		/* M-a */
+	/* 226 */	ED_UNASSIGNED,		/* M-b */
+	/* 227 */	ED_UNASSIGNED,		/* M-c */
+	/* 228 */	ED_UNASSIGNED,		/* M-d */
+	/* 229 */	ED_UNASSIGNED,		/* M-e */
+	/* 230 */	ED_UNASSIGNED,		/* M-f */
+	/* 231 */	ED_UNASSIGNED,		/* M-g */
+	/* 232 */	ED_UNASSIGNED,		/* M-h */
+	/* 233 */	ED_UNASSIGNED,		/* M-i */
+	/* 234 */	ED_UNASSIGNED,		/* M-j */
+	/* 235 */	ED_UNASSIGNED,		/* M-k */
+	/* 236 */	ED_UNASSIGNED,		/* M-l */
+	/* 237 */	ED_UNASSIGNED,		/* M-m */
+	/* 238 */	ED_UNASSIGNED,		/* M-n */
+	/* 239 */	ED_UNASSIGNED,		/* M-o */
+	/* 240 */	ED_UNASSIGNED,		/* M-p */
+	/* 241 */	ED_UNASSIGNED,		/* M-q */
+	/* 242 */	ED_UNASSIGNED,		/* M-r */
+	/* 243 */	ED_UNASSIGNED,		/* M-s */
+	/* 244 */	ED_UNASSIGNED,		/* M-t */
+	/* 245 */	ED_UNASSIGNED,		/* M-u */
+	/* 246 */	ED_UNASSIGNED,		/* M-v */
+	/* 247 */	ED_UNASSIGNED,		/* M-w */
+	/* 248 */	ED_UNASSIGNED,		/* M-x */
+	/* 249 */	ED_UNASSIGNED,		/* M-y */
+	/* 250 */	ED_UNASSIGNED,		/* M-z */
+	/* 251 */	ED_UNASSIGNED,		/* M-{ */
+	/* 252 */	ED_UNASSIGNED,		/* M-| */
+	/* 253 */	ED_UNASSIGNED,		/* M-} */
+	/* 254 */	ED_UNASSIGNED,		/* M-~ */
+	/* 255 */	ED_UNASSIGNED		/* M-^? */
+};
+
+
+/* map_init():
+ *	Initialize and allocate the maps
+ */
+protected int
+map_init(EditLine *el)
+{
+
+	/*
+         * Make sure those are correct before starting.
+         */
+#ifdef MAP_DEBUG
+	if (sizeof(el_map_emacs) != N_KEYS * sizeof(el_action_t))
+		EL_ABORT((el->errfile, "Emacs map incorrect\n"));
+	if (sizeof(el_map_vi_command) != N_KEYS * sizeof(el_action_t))
+		EL_ABORT((el->errfile, "Vi command map incorrect\n"));
+	if (sizeof(el_map_vi_insert) != N_KEYS * sizeof(el_action_t))
+		EL_ABORT((el->errfile, "Vi insert map incorrect\n"));
+#endif
+
+	el->el_map.alt = el_malloc(sizeof(*el->el_map.alt) * N_KEYS);
+	if (el->el_map.alt == NULL)
+		return -1;
+	el->el_map.key = el_malloc(sizeof(*el->el_map.key) * N_KEYS);
+	if (el->el_map.key == NULL)
+		return -1;
+	el->el_map.emacs = el_map_emacs;
+	el->el_map.vic = el_map_vi_command;
+	el->el_map.vii = el_map_vi_insert;
+	el->el_map.help = el_malloc(sizeof(*el->el_map.help) * EL_NUM_FCNS);
+	if (el->el_map.help == NULL)
+		return -1;
+	(void) memcpy(el->el_map.help, help__get(),
+	    sizeof(*el->el_map.help) * EL_NUM_FCNS);
+	el->el_map.func = el_malloc(sizeof(*el->el_map.func) * EL_NUM_FCNS);
+	if (el->el_map.func == NULL)
+		return -1;
+	memcpy(el->el_map.func, func__get(), sizeof(*el->el_map.func)
+	    * EL_NUM_FCNS);
+	el->el_map.nfunc = EL_NUM_FCNS;
+
+#ifdef VIDEFAULT
+	map_init_vi(el);
+#else
+	map_init_emacs(el);
+#endif /* VIDEFAULT */
+	return 0;
+}
+
+
+/* map_end():
+ *	Free the space taken by the editor maps
+ */
+protected void
+map_end(EditLine *el)
+{
+
+	el_free(el->el_map.alt);
+	el->el_map.alt = NULL;
+	el_free(el->el_map.key);
+	el->el_map.key = NULL;
+	el->el_map.emacs = NULL;
+	el->el_map.vic = NULL;
+	el->el_map.vii = NULL;
+	el_free(el->el_map.help);
+	el->el_map.help = NULL;
+	el_free(el->el_map.func);
+	el->el_map.func = NULL;
+}
+
+
+/* map_init_nls():
+ *	Find all the printable keys and bind them to self insert
+ */
+private void
+map_init_nls(EditLine *el)
+{
+	int i;
+
+	el_action_t *map = el->el_map.key;
+
+	for (i = 0200; i <= 0377; i++)
+		if (Isprint(i))
+			map[i] = ED_INSERT;
+}
+
+
+/* map_init_meta():
+ *	Bind all the meta keys to the appropriate ESC-<key> sequence
+ */
+private void
+map_init_meta(EditLine *el)
+{
+	Char buf[3];
+	int i;
+	el_action_t *map = el->el_map.key;
+	el_action_t *alt = el->el_map.alt;
+
+	for (i = 0; i <= 0377 && map[i] != EM_META_NEXT; i++)
+		continue;
+
+	if (i > 0377) {
+		for (i = 0; i <= 0377 && alt[i] != EM_META_NEXT; i++)
+			continue;
+		if (i > 0377) {
+			i = 033;
+			if (el->el_map.type == MAP_VI)
+				map = alt;
+		} else
+			map = alt;
+	}
+	buf[0] = (Char) i;
+	buf[2] = 0;
+	for (i = 0200; i <= 0377; i++)
+		switch (map[i]) {
+		case ED_INSERT:
+		case ED_UNASSIGNED:
+		case ED_SEQUENCE_LEAD_IN:
+			break;
+		default:
+			buf[1] = i & 0177;
+			keymacro_add(el, buf, keymacro_map_cmd(el, (int) map[i]), XK_CMD);
+			break;
+		}
+	map[(int) buf[0]] = ED_SEQUENCE_LEAD_IN;
+}
+
+
+/* map_init_vi():
+ *	Initialize the vi bindings
+ */
+protected void
+map_init_vi(EditLine *el)
+{
+	int i;
+	el_action_t *key = el->el_map.key;
+	el_action_t *alt = el->el_map.alt;
+	const el_action_t *vii = el->el_map.vii;
+	const el_action_t *vic = el->el_map.vic;
+
+	el->el_map.type = MAP_VI;
+	el->el_map.current = el->el_map.key;
+
+	keymacro_reset(el);
+
+	for (i = 0; i < N_KEYS; i++) {
+		key[i] = vii[i];
+		alt[i] = vic[i];
+	}
+
+	map_init_meta(el);
+	map_init_nls(el);
+
+	tty_bind_char(el, 1);
+	terminal_bind_arrow(el);
+}
+
+
+/* map_init_emacs():
+ *	Initialize the emacs bindings
+ */
+protected void
+map_init_emacs(EditLine *el)
+{
+	int i;
+	Char buf[3];
+	el_action_t *key = el->el_map.key;
+	el_action_t *alt = el->el_map.alt;
+	const el_action_t *emacs = el->el_map.emacs;
+
+	el->el_map.type = MAP_EMACS;
+	el->el_map.current = el->el_map.key;
+	keymacro_reset(el);
+
+	for (i = 0; i < N_KEYS; i++) {
+		key[i] = emacs[i];
+		alt[i] = ED_UNASSIGNED;
+	}
+
+	map_init_meta(el);
+	map_init_nls(el);
+
+	buf[0] = CONTROL('X');
+	buf[1] = CONTROL('X');
+	buf[2] = 0;
+	keymacro_add(el, buf, keymacro_map_cmd(el, EM_EXCHANGE_MARK), XK_CMD);
+
+	tty_bind_char(el, 1);
+	terminal_bind_arrow(el);
+}
+
+
+/* map_set_editor():
+ *	Set the editor
+ */
+protected int
+map_set_editor(EditLine *el, Char *editor)
+{
+
+	if (Strcmp(editor, STR("emacs")) == 0) {
+		map_init_emacs(el);
+		return 0;
+	}
+	if (Strcmp(editor, STR("vi")) == 0) {
+		map_init_vi(el);
+		return 0;
+	}
+	return -1;
+}
+
+
+/* map_get_editor():
+ *	Retrieve the editor
+ */
+protected int
+map_get_editor(EditLine *el, const Char **editor)
+{
+
+	if (editor == NULL)
+		return -1;
+	switch (el->el_map.type) {
+	case MAP_EMACS:
+		*editor = STR("emacs");
+		return 0;
+	case MAP_VI:
+		*editor = STR("vi");
+		return 0;
+	}
+	return -1;
+}
+
+
+/* map_print_key():
+ *	Print the function description for 1 key
+ */
+private void
+map_print_key(EditLine *el, el_action_t *map, const Char *in)
+{
+	char outbuf[EL_BUFSIZ];
+	el_bindings_t *bp, *ep;
+
+	if (in[0] == '\0' || in[1] == '\0') {
+		(void) keymacro__decode_str(in, outbuf, sizeof(outbuf), "");
+		ep = &el->el_map.help[el->el_map.nfunc];
+		for (bp = el->el_map.help; bp < ep; bp++)
+			if (bp->func == map[(unsigned char) *in]) {
+				(void) fprintf(el->el_outfile,
+				    "%s\t->\t" FSTR "\n", outbuf, bp->name);
+				return;
+			}
+	} else
+		keymacro_print(el, in);
+}
+
+
+/* map_print_some_keys():
+ *	Print keys from first to last
+ */
+private void
+map_print_some_keys(EditLine *el, el_action_t *map, Int first, Int last)
+{
+	el_bindings_t *bp, *ep;
+	Char firstbuf[2], lastbuf[2];
+	char unparsbuf[EL_BUFSIZ], extrabuf[EL_BUFSIZ];
+
+	firstbuf[0] = first;
+	firstbuf[1] = 0;
+	lastbuf[0] = last;
+	lastbuf[1] = 0;
+	if (map[first] == ED_UNASSIGNED) {
+		if (first == last) {
+			(void) keymacro__decode_str(firstbuf, unparsbuf, 
+			    sizeof(unparsbuf), STRQQ);
+			(void) fprintf(el->el_outfile,
+			    "%-15s->  is undefined\n", unparsbuf);
+		}
+		return;
+	}
+	ep = &el->el_map.help[el->el_map.nfunc];
+	for (bp = el->el_map.help; bp < ep; bp++) {
+		if (bp->func == map[first]) {
+			if (first == last) {
+				(void) keymacro__decode_str(firstbuf, unparsbuf, 
+				    sizeof(unparsbuf), STRQQ);
+				(void) fprintf(el->el_outfile, "%-15s->  " FSTR "\n",
+				    unparsbuf, bp->name);
+			} else {
+				(void) keymacro__decode_str(firstbuf, unparsbuf, 
+				    sizeof(unparsbuf), STRQQ);
+				(void) keymacro__decode_str(lastbuf, extrabuf, 
+				    sizeof(extrabuf), STRQQ);
+				(void) fprintf(el->el_outfile,
+				    "%-4s to %-7s->  " FSTR "\n",
+				    unparsbuf, extrabuf, bp->name);
+			}
+			return;
+		}
+	}
+#ifdef MAP_DEBUG
+	if (map == el->el_map.key) {
+		(void) keymacro__decode_str(firstbuf, unparsbuf, 
+		    sizeof(unparsbuf), STRQQ);
+		(void) fprintf(el->el_outfile,
+		    "BUG!!! %s isn't bound to anything.\n", unparsbuf);
+		(void) fprintf(el->el_outfile, "el->el_map.key[%d] == %d\n",
+		    first, el->el_map.key[first]);
+	} else {
+		(void) keymacro__decode_str(firstbuf, unparsbuf, 
+		    sizeof(unparsbuf), STRQQ);
+		(void) fprintf(el->el_outfile,
+		    "BUG!!! %s isn't bound to anything.\n", unparsbuf);
+		(void) fprintf(el->el_outfile, "el->el_map.alt[%d] == %d\n",
+		    first, el->el_map.alt[first]);
+	}
+#endif
+	EL_ABORT((el->el_errfile, "Error printing keys\n"));
+}
+
+
+/* map_print_all_keys():
+ *	Print the function description for all keys.
+ */
+private void
+map_print_all_keys(EditLine *el)
+{
+	int prev, i;
+
+	(void) fprintf(el->el_outfile, "Standard key bindings\n");
+	prev = 0;
+	for (i = 0; i < N_KEYS; i++) {
+		if (el->el_map.key[prev] == el->el_map.key[i])
+			continue;
+		map_print_some_keys(el, el->el_map.key, prev, i - 1);
+		prev = i;
+	}
+	map_print_some_keys(el, el->el_map.key, prev, i - 1);
+
+	(void) fprintf(el->el_outfile, "Alternative key bindings\n");
+	prev = 0;
+	for (i = 0; i < N_KEYS; i++) {
+		if (el->el_map.alt[prev] == el->el_map.alt[i])
+			continue;
+		map_print_some_keys(el, el->el_map.alt, prev, i - 1);
+		prev = i;
+	}
+	map_print_some_keys(el, el->el_map.alt, prev, i - 1);
+
+	(void) fprintf(el->el_outfile, "Multi-character bindings\n");
+	keymacro_print(el, STR(""));
+	(void) fprintf(el->el_outfile, "Arrow key bindings\n");
+	terminal_print_arrow(el, STR(""));
+}
+
+
+/* map_bind():
+ *	Add/remove/change bindings
+ */
+protected int
+map_bind(EditLine *el, int argc, const Char **argv)
+{
+	el_action_t *map;
+	int ntype, rem;
+	const Char *p;
+	Char inbuf[EL_BUFSIZ];
+	Char outbuf[EL_BUFSIZ];
+	const Char *in = NULL;
+	Char *out;
+	el_bindings_t *bp, *ep;
+	int cmd;
+	int key;
+
+	if (argv == NULL)
+		return -1;
+
+	map = el->el_map.key;
+	ntype = XK_CMD;
+	key = rem = 0;
+	for (argc = 1; (p = argv[argc]) != NULL; argc++)
+		if (p[0] == '-')
+			switch (p[1]) {
+			case 'a':
+				map = el->el_map.alt;
+				break;
+
+			case 's':
+				ntype = XK_STR;
+				break;
+#ifdef notyet
+			case 'c':
+				ntype = XK_EXE;
+				break;
+#endif
+			case 'k':
+				key = 1;
+				break;
+
+			case 'r':
+				rem = 1;
+				break;
+
+			case 'v':
+				map_init_vi(el);
+				return 0;
+
+			case 'e':
+				map_init_emacs(el);
+				return 0;
+
+			case 'l':
+				ep = &el->el_map.help[el->el_map.nfunc];
+				for (bp = el->el_map.help; bp < ep; bp++)
+					(void) fprintf(el->el_outfile,
+					    "" FSTR "\n\t" FSTR "\n",
+					    bp->name, bp->description);
+				return 0;
+			default:
+				(void) fprintf(el->el_errfile,
+				    "" FSTR ": Invalid switch `%c'.\n",
+				    argv[0], p[1]);
+			}
+		else
+			break;
+
+	if (argv[argc] == NULL) {
+		map_print_all_keys(el);
+		return 0;
+	}
+	if (key)
+		in = argv[argc++];
+	else if ((in = parse__string(inbuf, argv[argc++])) == NULL) {
+		(void) fprintf(el->el_errfile,
+		    "" FSTR ": Invalid \\ or ^ in instring.\n",
+		    argv[0]);
+		return -1;
+	}
+	if (rem) {
+		if (key) {
+			(void) terminal_clear_arrow(el, in);
+			return -1;
+		}
+		if (in[1])
+			(void) keymacro_delete(el, in);
+		else if (map[(unsigned char) *in] == ED_SEQUENCE_LEAD_IN)
+			(void) keymacro_delete(el, in);
+		else
+			map[(unsigned char) *in] = ED_UNASSIGNED;
+		return 0;
+	}
+	if (argv[argc] == NULL) {
+		if (key)
+			terminal_print_arrow(el, in);
+		else
+			map_print_key(el, map, in);
+		return 0;
+	}
+#ifdef notyet
+	if (argv[argc + 1] != NULL) {
+		bindkeymacro_usage();
+		return -1;
+	}
+#endif
+
+	switch (ntype) {
+	case XK_STR:
+	case XK_EXE:
+		if ((out = parse__string(outbuf, argv[argc])) == NULL) {
+			(void) fprintf(el->el_errfile,
+			    "" FSTR ": Invalid \\ or ^ in outstring.\n", argv[0]);
+			return -1;
+		}
+		if (key)
+			terminal_set_arrow(el, in, keymacro_map_str(el, out), ntype);
+		else
+			keymacro_add(el, in, keymacro_map_str(el, out), ntype);
+		map[(unsigned char) *in] = ED_SEQUENCE_LEAD_IN;
+		break;
+
+	case XK_CMD:
+		if ((cmd = parse_cmd(el, argv[argc])) == -1) {
+			(void) fprintf(el->el_errfile,
+			    "" FSTR ": Invalid command `" FSTR "'.\n",
+			    argv[0], argv[argc]);
+			return -1;
+		}
+		if (key)
+			terminal_set_arrow(el, in, keymacro_map_cmd(el, cmd), ntype);
+		else {
+			if (in[1]) {
+				keymacro_add(el, in, keymacro_map_cmd(el, cmd), ntype);
+				map[(unsigned char) *in] = ED_SEQUENCE_LEAD_IN;
+			} else {
+				keymacro_clear(el, map, in);
+				map[(unsigned char) *in] = (el_action_t)cmd;
+			}
+		}
+		break;
+
+	/* coverity[dead_error_begin] */
+	default:
+		EL_ABORT((el->el_errfile, "Bad XK_ type %d\n", ntype));
+		break;
+	}
+	return 0;
+}
+
+
+/* map_addfunc():
+ *	add a user defined function
+ */
+protected int
+map_addfunc(EditLine *el, const Char *name, const Char *help, el_func_t func)
+{
+	void *p;
+	size_t nf = (size_t)el->el_map.nfunc + 1;
+
+	if (name == NULL || help == NULL || func == NULL)
+		return -1;
+
+	if ((p = el_realloc(el->el_map.func, nf *
+	    sizeof(*el->el_map.func))) == NULL)
+		return -1;
+	el->el_map.func = p;
+	if ((p = el_realloc(el->el_map.help, nf * sizeof(*el->el_map.help)))
+	    == NULL)
+		return -1;
+	el->el_map.help = p;
+
+	nf = (size_t)el->el_map.nfunc;
+	el->el_map.func[nf] = func;
+
+	el->el_map.help[nf].name = name;
+	el->el_map.help[nf].func = (int)nf;
+	el->el_map.help[nf].description = help;
+	el->el_map.nfunc++;
+
+	return 0;
+}
diff --git a/src/map.h b/src/map.h
new file mode 100644
index 0000000..8e0c7e4
--- /dev/null
+++ b/src/map.h
@@ -0,0 +1,77 @@
+/*	$NetBSD: map.h,v 1.9 2009/12/30 22:37:40 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)map.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.map.h:	Editor maps
+ */
+#ifndef _h_el_map
+#define	_h_el_map
+
+typedef struct el_bindings_t {	/* for the "bind" shell command */
+	const Char	*name;		/* function name for bind command */
+	int		 func;		/* function numeric value */
+	const Char	*description;	/* description of function */
+} el_bindings_t;
+
+
+typedef struct el_map_t {
+	el_action_t	*alt;		/* The current alternate key map */
+	el_action_t	*key;		/* The current normal key map	*/
+	el_action_t	*current;	/* The keymap we are using	*/
+	const el_action_t *emacs;	/* The default emacs key map	*/
+	const el_action_t *vic;		/* The vi command mode key map	*/
+	const el_action_t *vii;		/* The vi insert mode key map	*/
+	int		 type;		/* Emacs or vi			*/
+	el_bindings_t	*help;		/* The help for the editor functions */
+	el_func_t	*func;		/* List of available functions	*/
+	int		 nfunc;		/* The number of functions/help items */
+} el_map_t;
+
+#define	MAP_EMACS	0
+#define	MAP_VI		1
+
+#define N_KEYS      256
+
+protected int	map_bind(EditLine *, int, const Char **);
+protected int	map_init(EditLine *);
+protected void	map_end(EditLine *);
+protected void	map_init_vi(EditLine *);
+protected void	map_init_emacs(EditLine *);
+protected int	map_set_editor(EditLine *, Char *);
+protected int	map_get_editor(EditLine *, const Char **);
+protected int	map_addfunc(EditLine *, const Char *, const Char *, el_func_t);
+
+#endif /* _h_el_map */
diff --git a/src/parse.c b/src/parse.c
new file mode 100644
index 0000000..f1c4391
--- /dev/null
+++ b/src/parse.c
@@ -0,0 +1,285 @@
+/*	$NetBSD: parse.c,v 1.26 2011/08/16 16:25:15 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)parse.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: parse.c,v 1.26 2011/08/16 16:25:15 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * parse.c: parse an editline extended command
+ *
+ * commands are:
+ *
+ *	bind
+ *	echotc
+ *	edit
+ *	gettc
+ *	history
+ *	settc
+ *	setty
+ */
+#include "el.h"
+#include <stdlib.h>
+
+private const struct {
+	const Char *name;
+	int (*func)(EditLine *, int, const Char **);
+} cmds[] = {
+	{ STR("bind"),  	map_bind	},
+	{ STR("echotc"),	terminal_echotc	},
+	{ STR("edit"),  	el_editmode	},
+	{ STR("history"),	hist_command	},
+	{ STR("telltc"),	terminal_telltc	},
+	{ STR("settc"),	        terminal_settc	},
+	{ STR("setty"),	        tty_stty	},
+	{ NULL,		        NULL		}
+};
+
+
+/* parse_line():
+ *	Parse a line and dispatch it
+ */
+protected int
+parse_line(EditLine *el, const Char *line)
+{
+	const Char **argv;
+	int argc;
+	TYPE(Tokenizer) *tok;
+
+	tok = FUN(tok,init)(NULL);
+	FUN(tok,str)(tok, line, &argc, &argv);
+	argc = FUN(el,parse)(el, argc, argv);
+	FUN(tok,end)(tok);
+	return argc;
+}
+
+
+/* el_parse():
+ *	Command dispatcher
+ */
+public int
+FUN(el,parse)(EditLine *el, int argc, const Char *argv[])
+{
+	const Char *ptr;
+	int i;
+
+	if (argc < 1)
+		return -1;
+	ptr = Strchr(argv[0], ':');
+	if (ptr != NULL) {
+		Char *tprog;
+		size_t l;
+
+		if (ptr == argv[0])
+			return 0;
+		l = (size_t)(ptr - argv[0] - 1);
+		tprog = el_malloc((l + 1) * sizeof(*tprog));
+		if (tprog == NULL)
+			return 0;
+		(void) Strncpy(tprog, argv[0], l);
+		tprog[l] = '\0';
+		ptr++;
+		l = (size_t)el_match(el->el_prog, tprog);
+		el_free(tprog);
+		if (!l)
+			return 0;
+	} else
+		ptr = argv[0];
+
+	for (i = 0; cmds[i].name != NULL; i++)
+		if (Strcmp(cmds[i].name, ptr) == 0) {
+			i = (*cmds[i].func) (el, argc, argv);
+			return -i;
+		}
+	return -1;
+}
+
+
+/* parse__escape():
+ *	Parse a string of the form ^<char> \<odigit> \<char> \U+xxxx and return
+ *	the appropriate character or -1 if the escape is not valid
+ */
+protected int
+parse__escape(const Char **ptr)
+{
+	const Char *p;
+	Int c;
+
+	p = *ptr;
+
+	if (p[1] == 0)
+		return -1;
+
+	if (*p == '\\') {
+		p++;
+		switch (*p) {
+		case 'a':
+			c = '\007';	/* Bell */
+			break;
+		case 'b':
+			c = '\010';	/* Backspace */
+			break;
+		case 't':
+			c = '\011';	/* Horizontal Tab */
+			break;
+		case 'n':
+			c = '\012';	/* New Line */
+			break;
+		case 'v':
+			c = '\013';	/* Vertical Tab */
+			break;
+		case 'f':
+			c = '\014';	/* Form Feed */
+			break;
+		case 'r':
+			c = '\015';	/* Carriage Return */
+			break;
+		case 'e':
+			c = '\033';	/* Escape */
+			break;
+                case 'U':               /* Unicode \U+xxxx or \U+xxxxx format */
+                {
+                        int i;
+                        const Char hex[] = STR("0123456789ABCDEF");
+                        const Char *h;
+                        ++p;
+                        if (*p++ != '+')
+                                return -1;
+			c = 0;
+                        for (i = 0; i < 5; ++i) {
+                                h = Strchr(hex, *p++);
+                                if (!h && i < 4)
+                                        return -1;
+                                else if (h)
+                                        c = (c << 4) | ((int)(h - hex));
+                                else
+                                        --p;
+                        }
+                        if (c > 0x10FFFF) /* outside valid character range */
+                                return -1;
+                        break;
+                }
+		case '0':
+		case '1':
+		case '2':
+		case '3':
+		case '4':
+		case '5':
+		case '6':
+		case '7':
+		{
+			int cnt, ch;
+
+			for (cnt = 0, c = 0; cnt < 3; cnt++) {
+				ch = *p++;
+				if (ch < '0' || ch > '7') {
+					p--;
+					break;
+				}
+				c = (c << 3) | (ch - '0');
+			}
+			if ((c & (wint_t)0xffffff00) != (wint_t)0)
+				return -1;
+			--p;
+			break;
+		}
+		default:
+			c = *p;
+			break;
+		}
+	} else if (*p == '^') {
+		p++;
+		c = (*p == '?') ? '\177' : (*p & 0237);
+	} else
+		c = *p;
+	*ptr = ++p;
+	return c;
+}
+
+/* parse__string():
+ *	Parse the escapes from in and put the raw string out
+ */
+protected Char *
+parse__string(Char *out, const Char *in)
+{
+	Char *rv = out;
+	int n;
+
+	for (;;)
+		switch (*in) {
+		case '\0':
+			*out = '\0';
+			return rv;
+
+		case '\\':
+		case '^':
+			if ((n = parse__escape(&in)) == -1)
+				return NULL;
+			*out++ = n;
+			break;
+
+		case 'M':
+			if (in[1] == '-' && in[2] != '\0') {
+				*out++ = '\033';
+				in += 2;
+				break;
+			}
+			/*FALLTHROUGH*/
+
+		default:
+			*out++ = *in++;
+			break;
+		}
+}
+
+
+/* parse_cmd():
+ *	Return the command number for the command string given
+ *	or -1 if one is not found
+ */
+protected int
+parse_cmd(EditLine *el, const Char *cmd)
+{
+	el_bindings_t *b;
+
+	for (b = el->el_map.help; b->name != NULL; b++)
+		if (Strcmp(b->name, cmd) == 0)
+			return b->func;
+	return -1;
+}
diff --git a/src/parse.h b/src/parse.h
new file mode 100644
index 0000000..ec04051
--- /dev/null
+++ b/src/parse.h
@@ -0,0 +1,48 @@
+/*	$NetBSD: parse.h,v 1.7 2009/12/30 22:37:40 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)parse.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.parse.h: Parser functions
+ */
+#ifndef _h_el_parse
+#define	_h_el_parse
+
+protected int	 parse_line(EditLine *, const Char *);
+protected int	 parse__escape(const Char **);
+protected Char	*parse__string(Char *, const Char *);
+protected int	 parse_cmd(EditLine *, const Char *);
+
+#endif /* _h_el_parse */
diff --git a/src/prompt.c b/src/prompt.c
new file mode 100644
index 0000000..48b2d27
--- /dev/null
+++ b/src/prompt.c
@@ -0,0 +1,199 @@
+/*	$NetBSD: prompt.c,v 1.20 2011/07/29 15:16:33 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)prompt.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: prompt.c,v 1.20 2011/07/29 15:16:33 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * prompt.c: Prompt printing functions
+ */
+#include <stdio.h>
+#include "el.h"
+
+private Char	*prompt_default(EditLine *);
+private Char	*prompt_default_r(EditLine *);
+
+/* prompt_default():
+ *	Just a default prompt, in case the user did not provide one
+ */
+private Char *
+/*ARGSUSED*/
+prompt_default(EditLine *el __attribute__((__unused__)))
+{
+	static Char a[3] = {'?', ' ', '\0'};
+
+	return a;
+}
+
+
+/* prompt_default_r():
+ *	Just a default rprompt, in case the user did not provide one
+ */
+private Char *
+/*ARGSUSED*/
+prompt_default_r(EditLine *el __attribute__((__unused__)))
+{
+	static Char a[1] = {'\0'};
+
+	return a;
+}
+
+
+/* prompt_print():
+ *	Print the prompt and update the prompt position.
+ */
+protected void
+prompt_print(EditLine *el, int op)
+{
+	el_prompt_t *elp;
+	Char *p;
+	int ignore = 0;
+
+	if (op == EL_PROMPT)
+		elp = &el->el_prompt;
+	else
+		elp = &el->el_rprompt;
+
+	if (elp->p_wide)
+		p = (*elp->p_func)(el);
+	else
+		p = ct_decode_string((char *)(void *)(*elp->p_func)(el),
+		    &el->el_scratch);
+
+	for (; *p; p++) {
+		if (elp->p_ignore == *p) {
+			ignore = !ignore;
+			continue;
+		}
+		if (ignore)
+			terminal__putc(el, *p);
+		else
+			re_putc(el, *p, 1);
+	}
+
+	elp->p_pos.v = el->el_refresh.r_cursor.v;
+	elp->p_pos.h = el->el_refresh.r_cursor.h;
+}
+
+
+/* prompt_init():
+ *	Initialize the prompt stuff
+ */
+protected int
+prompt_init(EditLine *el)
+{
+
+	el->el_prompt.p_func = prompt_default;
+	el->el_prompt.p_pos.v = 0;
+	el->el_prompt.p_pos.h = 0;
+	el->el_prompt.p_ignore = '\0';
+	el->el_rprompt.p_func = prompt_default_r;
+	el->el_rprompt.p_pos.v = 0;
+	el->el_rprompt.p_pos.h = 0;
+	el->el_rprompt.p_ignore = '\0';
+	return 0;
+}
+
+
+/* prompt_end():
+ *	Clean up the prompt stuff
+ */
+protected void
+/*ARGSUSED*/
+prompt_end(EditLine *el __attribute__((__unused__)))
+{
+}
+
+
+/* prompt_set():
+ *	Install a prompt printing function
+ */
+protected int
+prompt_set(EditLine *el, el_pfunc_t prf, Char c, int op, int wide)
+{
+	el_prompt_t *p;
+
+	if (op == EL_PROMPT || op == EL_PROMPT_ESC)
+		p = &el->el_prompt;
+	else
+		p = &el->el_rprompt;
+
+	if (prf == NULL) {
+		if (op == EL_PROMPT || op == EL_PROMPT_ESC)
+			p->p_func = prompt_default;
+		else
+			p->p_func = prompt_default_r;
+	} else {
+		p->p_func = prf;
+	}
+
+	p->p_ignore = c;
+
+	p->p_pos.v = 0;
+	p->p_pos.h = 0;
+	p->p_wide = wide;
+
+	return 0;
+}
+
+
+/* prompt_get():
+ *	Retrieve the prompt printing function
+ */
+protected int
+prompt_get(EditLine *el, el_pfunc_t *prf, Char *c, int op)
+{
+	el_prompt_t *p;
+
+	if (prf == NULL)
+		return -1;
+
+	if (op == EL_PROMPT)
+		p = &el->el_prompt;
+	else
+		p = &el->el_rprompt;
+
+	if (prf)
+		*prf = p->p_func;
+	if (c)
+		*c = p->p_ignore;
+
+	return 0;
+}
diff --git a/src/prompt.h b/src/prompt.h
new file mode 100644
index 0000000..af63b82
--- /dev/null
+++ b/src/prompt.h
@@ -0,0 +1,60 @@
+/*	$NetBSD: prompt.h,v 1.10 2009/12/30 22:37:40 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)prompt.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.prompt.h: Prompt printing stuff
+ */
+#ifndef _h_el_prompt
+#define	_h_el_prompt
+
+#include "histedit.h"
+
+typedef Char    *(*el_pfunc_t)(EditLine *);
+
+typedef struct el_prompt_t {
+	el_pfunc_t	p_func;		/* Function to return the prompt */
+	coord_t		p_pos;		/* position in the line after prompt */
+	Char		p_ignore;	/* character to start/end literal */
+	int		p_wide;	
+} el_prompt_t;
+
+protected void	prompt_print(EditLine *, int);
+protected int	prompt_set(EditLine *, el_pfunc_t, Char, int, int);
+protected int	prompt_get(EditLine *, el_pfunc_t *, Char *, int);
+protected int	prompt_init(EditLine *);
+protected void	prompt_end(EditLine *);
+
+#endif /* _h_el_prompt */
diff --git a/src/read.c b/src/read.c
new file mode 100644
index 0000000..df6ac20
--- /dev/null
+++ b/src/read.c
@@ -0,0 +1,735 @@
+/*	$NetBSD: read.c,v 1.70 2013/05/27 23:55:55 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)read.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: read.c,v 1.70 2013/05/27 23:55:55 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * read.c: Clean this junk up! This is horrible code.
+ *	   Terminal read functions
+ */
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <limits.h>
+#include "el.h"
+
+#define OKCMD	-1	/* must be -1! */
+
+private int	read__fixio(int, int);
+private int	read_preread(EditLine *);
+private int	read_char(EditLine *, Char *);
+private int	read_getcmd(EditLine *, el_action_t *, Char *);
+private void	read_pop(c_macro_t *);
+
+/* read_init():
+ *	Initialize the read stuff
+ */
+protected int
+read_init(EditLine *el)
+{
+	/* builtin read_char */
+	el->el_read.read_char = read_char;
+	return 0;
+}
+
+
+/* el_read_setfn():
+ *	Set the read char function to the one provided.
+ *	If it is set to EL_BUILTIN_GETCFN, then reset to the builtin one.
+ */
+protected int
+el_read_setfn(EditLine *el, el_rfunc_t rc)
+{
+	el->el_read.read_char = (rc == EL_BUILTIN_GETCFN) ? read_char : rc;
+	return 0;
+}
+
+
+/* el_read_getfn():
+ *	return the current read char function, or EL_BUILTIN_GETCFN
+ *	if it is the default one
+ */
+protected el_rfunc_t
+el_read_getfn(EditLine *el)
+{
+       return el->el_read.read_char == read_char ?
+	    EL_BUILTIN_GETCFN : el->el_read.read_char;
+}
+
+
+#ifndef MIN
+#define MIN(A,B) ((A) < (B) ? (A) : (B))
+#endif
+
+#ifdef DEBUG_EDIT
+private void
+read_debug(EditLine *el)
+{
+
+	if (el->el_line.cursor > el->el_line.lastchar)
+		(void) fprintf(el->el_errfile, "cursor > lastchar\r\n");
+	if (el->el_line.cursor < el->el_line.buffer)
+		(void) fprintf(el->el_errfile, "cursor < buffer\r\n");
+	if (el->el_line.cursor > el->el_line.limit)
+		(void) fprintf(el->el_errfile, "cursor > limit\r\n");
+	if (el->el_line.lastchar > el->el_line.limit)
+		(void) fprintf(el->el_errfile, "lastchar > limit\r\n");
+	if (el->el_line.limit != &el->el_line.buffer[EL_BUFSIZ - 2])
+		(void) fprintf(el->el_errfile, "limit != &buffer[EL_BUFSIZ-2]\r\n");
+}
+#endif /* DEBUG_EDIT */
+
+
+/* read__fixio():
+ *	Try to recover from a read error
+ */
+/* ARGSUSED */
+private int
+read__fixio(int fd __attribute__((__unused__)), int e)
+{
+
+	switch (e) {
+	case -1:		/* Make sure that the code is reachable */
+
+#ifdef EWOULDBLOCK
+	case EWOULDBLOCK:
+#ifndef TRY_AGAIN
+#define TRY_AGAIN
+#endif
+#endif /* EWOULDBLOCK */
+
+#if defined(POSIX) && defined(EAGAIN)
+#if defined(EWOULDBLOCK) && EWOULDBLOCK != EAGAIN
+	case EAGAIN:
+#ifndef TRY_AGAIN
+#define TRY_AGAIN
+#endif
+#endif /* EWOULDBLOCK && EWOULDBLOCK != EAGAIN */
+#endif /* POSIX && EAGAIN */
+
+		e = 0;
+#ifdef TRY_AGAIN
+#if defined(F_SETFL) && defined(O_NDELAY)
+		if ((e = fcntl(fd, F_GETFL, 0)) == -1)
+			return -1;
+
+		if (fcntl(fd, F_SETFL, e & ~O_NDELAY) == -1)
+			return -1;
+		else
+			e = 1;
+#endif /* F_SETFL && O_NDELAY */
+
+#ifdef FIONBIO
+		{
+			int zero = 0;
+
+			if (ioctl(fd, FIONBIO, &zero) == -1)
+				return -1;
+			else
+				e = 1;
+		}
+#endif /* FIONBIO */
+
+#endif /* TRY_AGAIN */
+		return e ? 0 : -1;
+
+	case EINTR:
+		return 0;
+
+	default:
+		return -1;
+	}
+}
+
+
+/* read_preread():
+ *	Try to read the stuff in the input queue;
+ */
+private int
+read_preread(EditLine *el)
+{
+	int chrs = 0;
+
+	if (el->el_tty.t_mode == ED_IO)
+		return 0;
+
+#ifndef WIDECHAR
+/* FIONREAD attempts to buffer up multiple bytes, and to make that work
+ * properly with partial wide/UTF-8 characters would need some careful work. */
+#ifdef FIONREAD
+	(void) ioctl(el->el_infd, FIONREAD, &chrs);
+	if (chrs > 0) {
+		char buf[EL_BUFSIZ];
+
+		chrs = read(el->el_infd, buf,
+		    (size_t) MIN(chrs, EL_BUFSIZ - 1));
+		if (chrs > 0) {
+			buf[chrs] = '\0';
+			el_push(el, buf);
+		}
+	}
+#endif /* FIONREAD */
+#endif
+	return chrs > 0;
+}
+
+
+/* el_push():
+ *	Push a macro
+ */
+public void
+FUN(el,push)(EditLine *el, const Char *str)
+{
+	c_macro_t *ma = &el->el_chared.c_macro;
+
+	if (str != NULL && ma->level + 1 < EL_MAXMACRO) {
+		ma->level++;
+		if ((ma->macro[ma->level] = Strdup(str)) != NULL)
+			return;
+		ma->level--;
+	}
+	terminal_beep(el);
+	terminal__flush(el);
+}
+
+
+/* read_getcmd():
+ *	Get next command from the input stream, return OKCMD on success.
+ *	Character values > 255 are not looked up in the map, but inserted.
+ */
+private int
+read_getcmd(EditLine *el, el_action_t *cmdnum, Char *ch)
+{
+	el_action_t cmd;
+	int num;
+
+	el->el_errno = 0;
+	do {
+		if ((num = FUN(el,getc)(el, ch)) != 1) {/* if EOF or error */
+			el->el_errno = num == 0 ? 0 : errno;
+			return 0;	/* not OKCMD */
+		}
+
+#ifdef	KANJI
+		if ((*ch & 0200)) {
+			el->el_state.metanext = 0;
+			cmd = CcViMap[' '];
+			break;
+		} else
+#endif /* KANJI */
+
+		if (el->el_state.metanext) {
+			el->el_state.metanext = 0;
+			*ch |= 0200;
+		}
+#ifdef WIDECHAR
+		if (*ch >= N_KEYS)
+			cmd = ED_INSERT;
+		else
+#endif
+			cmd = el->el_map.current[(unsigned char) *ch];
+		if (cmd == ED_SEQUENCE_LEAD_IN) {
+			keymacro_value_t val;
+			switch (keymacro_get(el, ch, &val)) {
+			case XK_CMD:
+				cmd = val.cmd;
+				break;
+			case XK_STR:
+				FUN(el,push)(el, val.str);
+				break;
+#ifdef notyet
+			case XK_EXE:
+				/* XXX: In the future to run a user function */
+				RunCommand(val.str);
+				break;
+#endif
+			default:
+				EL_ABORT((el->el_errfile, "Bad XK_ type \n"));
+				break;
+			}
+		}
+		if (el->el_map.alt == NULL)
+			el->el_map.current = el->el_map.key;
+	} while (cmd == ED_SEQUENCE_LEAD_IN);
+	*cmdnum = cmd;
+	return OKCMD;
+}
+
+#ifdef WIDECHAR
+/* utf8_islead():
+ *	Test whether a byte is a leading byte of a UTF-8 sequence.
+ */
+private int
+utf8_islead(int c)
+{
+	return c < 0x80 ||	       /* single byte char */
+	       (c >= 0xc2 && c <= 0xf4); /* start of multibyte sequence */
+}
+#endif
+
+/* read_char():
+ *	Read a character from the tty.
+ */
+private int
+read_char(EditLine *el, Char *cp)
+{
+	ssize_t num_read;
+	int tried = 0;
+	char cbuf[MB_LEN_MAX];
+	size_t cbp = 0;
+	int bytes = 0;
+
+ again:
+	el->el_signal->sig_no = 0;
+	while ((num_read = read(el->el_infd, cbuf + cbp, (size_t)1)) == -1) {
+		int e = errno;
+		switch (el->el_signal->sig_no) {
+		case SIGCONT:
+			FUN(el,set)(el, EL_REFRESH);
+			/*FALLTHROUGH*/
+		case SIGWINCH:
+			sig_set(el);
+			goto again;
+		default:
+			break;
+		}
+		if (!tried && read__fixio(el->el_infd, e) == 0)
+			tried = 1;
+		else {
+			errno = e;
+			*cp = '\0';
+			return -1;
+		}
+	}
+
+	/* Test for EOF */
+	if (num_read == 0) {
+		errno = 0;
+		*cp = '\0';
+		return 0;
+	}
+
+#ifdef WIDECHAR
+	if (el->el_flags & CHARSET_IS_UTF8) {
+		if (!utf8_islead((unsigned char)cbuf[0]))
+			goto again; /* discard the byte we read and try again */
+		++cbp;
+		if ((bytes = ct_mbtowc(cp, cbuf, cbp)) == -1) {
+			ct_mbtowc_reset;
+			if (cbp >= MB_LEN_MAX) { /* "shouldn't happen" */
+				errno = EILSEQ;
+				*cp = '\0';
+				return -1;
+			}
+			goto again;
+		}
+	} else if (isascii((unsigned char)cbuf[0]) ||
+		/* we don't support other multibyte charsets */
+		++cbp != 1 ||
+		/* Try non-ASCII characters in a 8-bit character set */
+		(bytes = ct_mbtowc(cp, cbuf, cbp)) != 1)
+#endif
+		*cp = (unsigned char)cbuf[0];
+
+	if ((el->el_flags & IGNORE_EXTCHARS) && bytes > 1) {
+		cbp = 0; /* skip this character */
+		goto again;
+	}
+
+	return (int)num_read;
+}
+
+/* read_pop():
+ *	Pop a macro from the stack
+ */
+private void
+read_pop(c_macro_t *ma)
+{
+	int i;
+
+	el_free(ma->macro[0]);
+	for (i = 0; i < ma->level; i++)
+		ma->macro[i] = ma->macro[i + 1];
+	ma->level--;
+	ma->offset = 0;
+}
+
+/* el_getc():
+ *	Read a character
+ */
+public int
+FUN(el,getc)(EditLine *el, Char *cp)
+{
+	int num_read;
+	c_macro_t *ma = &el->el_chared.c_macro;
+
+	terminal__flush(el);
+	for (;;) {
+		if (ma->level < 0) {
+			if (!read_preread(el))
+				break;
+		}
+
+		if (ma->level < 0)
+			break;
+
+		if (ma->macro[0][ma->offset] == '\0') {
+			read_pop(ma);
+			continue;
+		}
+
+		*cp = ma->macro[0][ma->offset++];
+
+		if (ma->macro[0][ma->offset] == '\0') {
+			/* Needed for QuoteMode On */
+			read_pop(ma);
+		}
+
+		return 1;
+	}
+
+#ifdef DEBUG_READ
+	(void) fprintf(el->el_errfile, "Turning raw mode on\n");
+#endif /* DEBUG_READ */
+	if (tty_rawmode(el) < 0)/* make sure the tty is set up correctly */
+		return 0;
+
+#ifdef DEBUG_READ
+	(void) fprintf(el->el_errfile, "Reading a character\n");
+#endif /* DEBUG_READ */
+	num_read = (*el->el_read.read_char)(el, cp);
+	if (num_read < 0)
+		el->el_errno = errno;
+#ifdef WIDECHAR
+	if (el->el_flags & NARROW_READ)
+		*cp = *(char *)(void *)cp;
+#endif
+#ifdef DEBUG_READ
+	(void) fprintf(el->el_errfile, "Got it %c\n", *cp);
+#endif /* DEBUG_READ */
+	return num_read;
+}
+
+protected void
+read_prepare(EditLine *el)
+{
+	if (el->el_flags & HANDLE_SIGNALS)
+		sig_set(el);
+	if (el->el_flags & NO_TTY)
+		return;
+	if ((el->el_flags & (UNBUFFERED|EDIT_DISABLED)) == UNBUFFERED)
+		tty_rawmode(el);
+
+	/* This is relatively cheap, and things go terribly wrong if
+	   we have the wrong size. */
+	el_resize(el);
+	re_clear_display(el);	/* reset the display stuff */
+	ch_reset(el, 0);
+	re_refresh(el);		/* print the prompt */
+
+	if (el->el_flags & UNBUFFERED)
+		terminal__flush(el);
+}
+
+protected void
+read_finish(EditLine *el)
+{
+	if ((el->el_flags & UNBUFFERED) == 0)
+		(void) tty_cookedmode(el);
+	if (el->el_flags & HANDLE_SIGNALS)
+		sig_clr(el);
+}
+
+public const Char *
+FUN(el,gets)(EditLine *el, int *nread)
+{
+	int retval;
+	el_action_t cmdnum = 0;
+	int num;		/* how many chars we have read at NL */
+	Char ch, *cp;
+	int crlf = 0;
+	int nrb;
+#ifdef FIONREAD
+	c_macro_t *ma = &el->el_chared.c_macro;
+#endif /* FIONREAD */
+
+	if (nread == NULL)
+		nread = &nrb;
+	*nread = 0;
+
+	if (el->el_flags & NO_TTY) {
+		size_t idx;
+
+		cp = el->el_line.buffer;
+		while ((num = (*el->el_read.read_char)(el, cp)) == 1) {
+			/* make sure there is space for next character */
+			if (cp + 1 >= el->el_line.limit) {
+				idx = (size_t)(cp - el->el_line.buffer);
+				if (!ch_enlargebufs(el, (size_t)2))
+					break;
+				cp = &el->el_line.buffer[idx];
+			}
+			cp++;
+			if (el->el_flags & UNBUFFERED)
+				break;
+			if (cp[-1] == '\r' || cp[-1] == '\n')
+				break;
+		}
+		if (num == -1) {
+			if (errno == EINTR)
+				cp = el->el_line.buffer;
+			el->el_errno = errno;
+		}
+
+		goto noedit;
+	}
+
+
+#ifdef FIONREAD
+	if (el->el_tty.t_mode == EX_IO && ma->level < 0) {
+		long chrs = 0;
+
+		(void) ioctl(el->el_infd, FIONREAD, &chrs);
+		if (chrs == 0) {
+			if (tty_rawmode(el) < 0) {
+				errno = 0;
+				*nread = 0;
+				return NULL;
+			}
+		}
+	}
+#endif /* FIONREAD */
+
+	if ((el->el_flags & UNBUFFERED) == 0)
+		read_prepare(el);
+
+	if (el->el_flags & EDIT_DISABLED) {
+		size_t idx;
+
+		if ((el->el_flags & UNBUFFERED) == 0)
+			cp = el->el_line.buffer;
+		else
+			cp = el->el_line.lastchar;
+
+		terminal__flush(el);
+
+		while ((num = (*el->el_read.read_char)(el, cp)) == 1) {
+			/* make sure there is space next character */
+			if (cp + 1 >= el->el_line.limit) {
+				idx = (size_t)(cp - el->el_line.buffer);
+				if (!ch_enlargebufs(el, (size_t)2))
+					break;
+				cp = &el->el_line.buffer[idx];
+			}
+			cp++;
+			crlf = cp[-1] == '\r' || cp[-1] == '\n';
+			if (el->el_flags & UNBUFFERED)
+				break;
+			if (crlf)
+				break;
+		}
+
+		if (num == -1) {
+			if (errno == EINTR)
+				cp = el->el_line.buffer;
+			el->el_errno = errno;
+		}
+
+		goto noedit;
+	}
+
+	for (num = OKCMD; num == OKCMD;) {	/* while still editing this
+						 * line */
+#ifdef DEBUG_EDIT
+		read_debug(el);
+#endif /* DEBUG_EDIT */
+		/* if EOF or error */
+		if ((num = read_getcmd(el, &cmdnum, &ch)) != OKCMD) {
+			num = -1;
+#ifdef DEBUG_READ
+			(void) fprintf(el->el_errfile,
+			    "Returning from el_gets %d\n", num);
+#endif /* DEBUG_READ */
+			break;
+		}
+		if (el->el_errno == EINTR) {
+			el->el_line.buffer[0] = '\0';
+			el->el_line.lastchar =
+			    el->el_line.cursor = el->el_line.buffer;
+			break;
+		}
+		if ((unsigned int)cmdnum >= (unsigned int)el->el_map.nfunc) {	/* BUG CHECK command */
+#ifdef DEBUG_EDIT
+			(void) fprintf(el->el_errfile,
+			    "ERROR: illegal command from key 0%o\r\n", ch);
+#endif /* DEBUG_EDIT */
+			continue;	/* try again */
+		}
+		/* now do the real command */
+#ifdef DEBUG_READ
+		{
+			el_bindings_t *b;
+			for (b = el->el_map.help; b->name; b++)
+				if (b->func == cmdnum)
+					break;
+			if (b->name)
+				(void) fprintf(el->el_errfile,
+				    "Executing %s\n", b->name);
+			else
+				(void) fprintf(el->el_errfile,
+				    "Error command = %d\n", cmdnum);
+		}
+#endif /* DEBUG_READ */
+		/* vi redo needs these way down the levels... */
+		el->el_state.thiscmd = cmdnum;
+		el->el_state.thisch = ch;
+		if (el->el_map.type == MAP_VI &&
+		    el->el_map.current == el->el_map.key &&
+		    el->el_chared.c_redo.pos < el->el_chared.c_redo.lim) {
+			if (cmdnum == VI_DELETE_PREV_CHAR &&
+			    el->el_chared.c_redo.pos != el->el_chared.c_redo.buf
+			    && Isprint(el->el_chared.c_redo.pos[-1]))
+				el->el_chared.c_redo.pos--;
+			else
+				*el->el_chared.c_redo.pos++ = ch;
+		}
+		retval = (*el->el_map.func[cmdnum]) (el, ch);
+#ifdef DEBUG_READ
+		(void) fprintf(el->el_errfile,
+			"Returned state %d\n", retval );
+#endif /* DEBUG_READ */
+
+		/* save the last command here */
+		el->el_state.lastcmd = cmdnum;
+
+		/* use any return value */
+		switch (retval) {
+		case CC_CURSOR:
+			re_refresh_cursor(el);
+			break;
+
+		case CC_REDISPLAY:
+			re_clear_lines(el);
+			re_clear_display(el);
+			/* FALLTHROUGH */
+
+		case CC_REFRESH:
+			re_refresh(el);
+			break;
+
+		case CC_REFRESH_BEEP:
+			re_refresh(el);
+			terminal_beep(el);
+			break;
+
+		case CC_NORM:	/* normal char */
+			break;
+
+		case CC_ARGHACK:	/* Suggested by Rich Salz */
+			/* <rsalz@pineapple.bbn.com> */
+			continue;	/* keep going... */
+
+		case CC_EOF:	/* end of file typed */
+			if ((el->el_flags & UNBUFFERED) == 0)
+				num = 0;
+			else if (num == -1) {
+				*el->el_line.lastchar++ = CONTROL('d');
+				el->el_line.cursor = el->el_line.lastchar;
+				num = 1;
+			}
+			break;
+
+		case CC_NEWLINE:	/* normal end of line */
+			num = (int)(el->el_line.lastchar - el->el_line.buffer);
+			break;
+
+		case CC_FATAL:	/* fatal error, reset to known state */
+#ifdef DEBUG_READ
+			(void) fprintf(el->el_errfile,
+			    "*** editor fatal ERROR ***\r\n\n");
+#endif /* DEBUG_READ */
+			/* put (real) cursor in a known place */
+			re_clear_display(el);	/* reset the display stuff */
+			ch_reset(el, 1);	/* reset the input pointers */
+			re_refresh(el); /* print the prompt again */
+			break;
+
+		case CC_ERROR:
+		default:	/* functions we don't know about */
+#ifdef DEBUG_READ
+			(void) fprintf(el->el_errfile,
+			    "*** editor ERROR ***\r\n\n");
+#endif /* DEBUG_READ */
+			terminal_beep(el);
+			terminal__flush(el);
+			break;
+		}
+		el->el_state.argument = 1;
+		el->el_state.doingarg = 0;
+		el->el_chared.c_vcmd.action = NOP;
+		if (el->el_flags & UNBUFFERED)
+			break;
+	}
+
+	terminal__flush(el);		/* flush any buffered output */
+	/* make sure the tty is set up correctly */
+	if ((el->el_flags & UNBUFFERED) == 0) {
+		read_finish(el);
+		*nread = num != -1 ? num : 0;
+	} else {
+		*nread = (int)(el->el_line.lastchar - el->el_line.buffer);
+	}
+	goto done;
+noedit:
+	el->el_line.cursor = el->el_line.lastchar = cp;
+	*cp = '\0';
+	*nread = (int)(el->el_line.cursor - el->el_line.buffer);
+done:
+	if (*nread == 0) {
+		if (num == -1) {
+			*nread = -1;
+			errno = el->el_errno;
+		}
+		return NULL;
+	} else
+		return el->el_line.buffer;
+}
diff --git a/src/read.h b/src/read.h
new file mode 100644
index 0000000..852606a
--- /dev/null
+++ b/src/read.h
@@ -0,0 +1,50 @@
+/*	$NetBSD: read.h,v 1.7 2009/12/30 22:37:40 christos Exp $	*/
+
+/*-
+ * Copyright (c) 2001 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Anthony Mallet.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * el.read.h: Character reading functions
+ */
+#ifndef	_h_el_read
+#define	_h_el_read
+
+typedef int (*el_rfunc_t)(EditLine *, Char *);
+
+typedef struct el_read_t {
+	el_rfunc_t	read_char;	/* Function to read a character */
+} el_read_t;
+ 
+protected int		read_init(EditLine *);
+protected void		read_prepare(EditLine *);
+protected void		read_finish(EditLine *);
+protected int		el_read_setfn(EditLine *, el_rfunc_t);
+protected el_rfunc_t	el_read_getfn(EditLine *);
+
+#endif /* _h_el_read */
diff --git a/src/readline.c b/src/readline.c
new file mode 100644
index 0000000..8cb43b9
--- /dev/null
+++ b/src/readline.c
@@ -0,0 +1,2277 @@
+/*	$NetBSD: readline.c,v 1.108 2013/05/28 00:10:34 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1997 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Jaromir Dolecek.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+__RCSID("$NetBSD: readline.c,v 1.108 2013/05/28 00:10:34 christos Exp $");
+#endif /* not lint && not SCCSID */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <stdio.h>
+#include <dirent.h>
+#include <string.h>
+#include <pwd.h>
+#include <ctype.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <limits.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <setjmp.h>
+#include <vis.h>
+
+#include "editline/readline.h"
+#include "el.h"
+#include "fcns.h"		/* for EL_NUM_FCNS */
+#include "histedit.h"
+#include "filecomplete.h"
+
+#if !defined(SIZE_T_MAX)
+# define SIZE_T_MAX (size_t)(-1)
+#endif
+
+void rl_prep_terminal(int);
+void rl_deprep_terminal(void);
+
+/* for rl_complete() */
+#define TAB		'\r'
+
+/* see comment at the #ifdef for sense of this */
+/* #define GDB_411_HACK */
+
+/* readline compatibility stuff - look at readline sources/documentation */
+/* to see what these variables mean */
+const char *rl_library_version = "EditLine wrapper";
+int rl_readline_version = RL_READLINE_VERSION;
+static char empty[] = { '\0' };
+static char expand_chars[] = { ' ', '\t', '\n', '=', '(', '\0' };
+static char break_chars[] = { ' ', '\t', '\n', '"', '\\', '\'', '`', '@', '$',
+    '>', '<', '=', ';', '|', '&', '{', '(', '\0' };
+char *rl_readline_name = empty;
+FILE *rl_instream = NULL;
+FILE *rl_outstream = NULL;
+int rl_point = 0;
+int rl_end = 0;
+char *rl_line_buffer = NULL;
+VCPFunction *rl_linefunc = NULL;
+int rl_done = 0;
+VFunction *rl_event_hook = NULL;
+KEYMAP_ENTRY_ARRAY emacs_standard_keymap,
+    emacs_meta_keymap,
+    emacs_ctlx_keymap;
+/*
+ * The following is not implemented; we always catch signals in the
+ * libedit fashion: set handlers on entry to el_gets() and clear them
+ * on the way out. This simplistic approach works for most cases; if
+ * it does not work for your application, please let us know.
+ */
+int rl_catch_signals = 1;
+int rl_catch_sigwinch = 1;
+
+int history_base = 1;		/* probably never subject to change */
+int history_length = 0;
+int max_input_history = 0;
+char history_expansion_char = '!';
+char history_subst_char = '^';
+char *history_no_expand_chars = expand_chars;
+Function *history_inhibit_expansion_function = NULL;
+char *history_arg_extract(int start, int end, const char *str);
+
+int rl_inhibit_completion = 0;
+int rl_attempted_completion_over = 0;
+char *rl_basic_word_break_characters = break_chars;
+char *rl_completer_word_break_characters = NULL;
+char *rl_completer_quote_characters = NULL;
+Function *rl_completion_entry_function = NULL;
+char *(*rl_completion_word_break_hook)(void) = NULL;
+CPPFunction *rl_attempted_completion_function = NULL;
+Function *rl_pre_input_hook = NULL;
+Function *rl_startup1_hook = NULL;
+int (*rl_getc_function)(FILE *) = NULL;
+char *rl_terminal_name = NULL;
+int rl_already_prompted = 0;
+int rl_filename_completion_desired = 0;
+int rl_ignore_completion_duplicates = 0;
+int readline_echoing_p = 1;
+int _rl_print_completions_horizontally = 0;
+VFunction *rl_redisplay_function = NULL;
+Function *rl_startup_hook = NULL;
+VFunction *rl_completion_display_matches_hook = NULL;
+VFunction *rl_prep_term_function = (VFunction *)rl_prep_terminal;
+VFunction *rl_deprep_term_function = (VFunction *)rl_deprep_terminal;
+KEYMAP_ENTRY_ARRAY emacs_meta_keymap;
+
+/*
+ * The current prompt string.
+ */
+char *rl_prompt = NULL;
+/*
+ * This is set to character indicating type of completion being done by
+ * rl_complete_internal(); this is available for application completion
+ * functions.
+ */
+int rl_completion_type = 0;
+
+/*
+ * If more than this number of items results from query for possible
+ * completions, we ask user if they are sure to really display the list.
+ */
+int rl_completion_query_items = 100;
+
+/*
+ * List of characters which are word break characters, but should be left
+ * in the parsed text when it is passed to the completion function.
+ * Shell uses this to help determine what kind of completing to do.
+ */
+char *rl_special_prefixes = NULL;
+
+/*
+ * This is the character appended to the completed words if at the end of
+ * the line. Default is ' ' (a space).
+ */
+int rl_completion_append_character = ' ';
+
+/* stuff below is used internally by libedit for readline emulation */
+
+static History *h = NULL;
+static EditLine *e = NULL;
+static Function *map[256];
+static jmp_buf topbuf;
+
+/* internal functions */
+static unsigned char	 _el_rl_complete(EditLine *, int);
+static unsigned char	 _el_rl_tstp(EditLine *, int);
+static char		*_get_prompt(EditLine *);
+static int		 _getc_function(EditLine *, char *);
+static HIST_ENTRY	*_move_history(int);
+static int		 _history_expand_command(const char *, size_t, size_t,
+    char **);
+static char		*_rl_compat_sub(const char *, const char *,
+    const char *, int);
+static int		 _rl_event_read_char(EditLine *, char *);
+static void		 _rl_update_pos(void);
+
+
+/* ARGSUSED */
+static char *
+_get_prompt(EditLine *el __attribute__((__unused__)))
+{
+	rl_already_prompted = 1;
+	return rl_prompt;
+}
+
+
+/*
+ * generic function for moving around history
+ */
+static HIST_ENTRY *
+_move_history(int op)
+{
+	HistEvent ev;
+	static HIST_ENTRY rl_he;
+
+	if (history(h, &ev, op) != 0)
+		return NULL;
+
+	rl_he.line = ev.str;
+	rl_he.data = NULL;
+
+	return &rl_he;
+}
+
+
+/*
+ * read one key from user defined input function
+ */
+static int
+/*ARGSUSED*/
+_getc_function(EditLine *el __attribute__((__unused__)), char *c)
+{
+	int i;
+
+	i = (*rl_getc_function)(NULL);
+	if (i == -1)
+		return 0;
+	*c = (char)i;
+	return 1;
+}
+
+static void
+_resize_fun(EditLine *el, void *a)
+{
+	const LineInfo *li;
+	char **ap = a;
+
+	li = el_line(el);
+	/* a cheesy way to get rid of const cast. */
+	*ap = memchr(li->buffer, *li->buffer, (size_t)1);
+}
+
+static const char *
+_default_history_file(void)
+{
+	struct passwd *p;
+	static char path[PATH_MAX];
+
+	if (*path)
+		return path;
+	if ((p = getpwuid(getuid())) == NULL)
+		return NULL;
+	(void)snprintf(path, sizeof(path), "%s/.history", p->pw_dir);
+	return path;
+}
+
+/*
+ * READLINE compatibility stuff
+ */
+
+/*
+ * Set the prompt
+ */
+int
+rl_set_prompt(const char *prompt)
+{
+	char *p;
+
+	if (!prompt)
+		prompt = "";
+	if (rl_prompt != NULL && strcmp(rl_prompt, prompt) == 0) 
+		return 0;
+	if (rl_prompt)
+		el_free(rl_prompt);
+	rl_prompt = strdup(prompt);
+	if (rl_prompt == NULL)
+		return -1;
+
+	while ((p = strchr(rl_prompt, RL_PROMPT_END_IGNORE)) != NULL)
+		*p = RL_PROMPT_START_IGNORE;
+
+	return 0;
+}
+
+/*
+ * initialize rl compat stuff
+ */
+int
+rl_initialize(void)
+{
+	HistEvent ev;
+	int editmode = 1;
+	struct termios t;
+
+	if (e != NULL)
+		el_end(e);
+	if (h != NULL)
+		history_end(h);
+
+	if (!rl_instream)
+		rl_instream = stdin;
+	if (!rl_outstream)
+		rl_outstream = stdout;
+
+	/*
+	 * See if we don't really want to run the editor
+	 */
+	if (tcgetattr(fileno(rl_instream), &t) != -1 && (t.c_lflag & ECHO) == 0)
+		editmode = 0;
+
+	e = el_init(rl_readline_name, rl_instream, rl_outstream, stderr);
+
+	if (!editmode)
+		el_set(e, EL_EDITMODE, 0);
+
+	h = history_init();
+	if (!e || !h)
+		return -1;
+
+	history(h, &ev, H_SETSIZE, INT_MAX);	/* unlimited */
+	history_length = 0;
+	max_input_history = INT_MAX;
+	el_set(e, EL_HIST, history, h);
+
+	/* Setup resize function */
+	el_set(e, EL_RESIZE, _resize_fun, &rl_line_buffer);
+
+	/* setup getc function if valid */
+	if (rl_getc_function)
+		el_set(e, EL_GETCFN, _getc_function);
+
+	/* for proper prompt printing in readline() */
+	if (rl_set_prompt("") == -1) {
+		history_end(h);
+		el_end(e);
+		return -1;
+	}
+	el_set(e, EL_PROMPT, _get_prompt, RL_PROMPT_START_IGNORE);
+	el_set(e, EL_SIGNAL, rl_catch_signals);
+
+	/* set default mode to "emacs"-style and read setting afterwards */
+	/* so this can be overriden */
+	el_set(e, EL_EDITOR, "emacs");
+	if (rl_terminal_name != NULL)
+		el_set(e, EL_TERMINAL, rl_terminal_name);
+	else
+		el_get(e, EL_TERMINAL, &rl_terminal_name);
+
+	/*
+	 * Word completion - this has to go AFTER rebinding keys
+	 * to emacs-style.
+	 */
+	el_set(e, EL_ADDFN, "rl_complete",
+	    "ReadLine compatible completion function",
+	    _el_rl_complete);
+	el_set(e, EL_BIND, "^I", "rl_complete", NULL);
+
+	/*
+	 * Send TSTP when ^Z is pressed.
+	 */
+	el_set(e, EL_ADDFN, "rl_tstp",
+	    "ReadLine compatible suspend function",
+	    _el_rl_tstp);
+	el_set(e, EL_BIND, "^Z", "rl_tstp", NULL);
+		
+	/* read settings from configuration file */
+	el_source(e, NULL);
+
+	/*
+	 * Unfortunately, some applications really do use rl_point
+	 * and rl_line_buffer directly.
+	 */
+	_resize_fun(e, &rl_line_buffer);
+	_rl_update_pos();
+
+	if (rl_startup_hook)
+		(*rl_startup_hook)(NULL, 0);
+
+	return 0;
+}
+
+
+/*
+ * read one line from input stream and return it, chomping
+ * trailing newline (if there is any)
+ */
+char *
+readline(const char *p)
+{
+	HistEvent ev;
+	const char * volatile prompt = p;
+	int count;
+	const char *ret;
+	char *buf;
+	static int used_event_hook;
+
+	if (e == NULL || h == NULL)
+		rl_initialize();
+
+	rl_done = 0;
+
+	(void)setjmp(topbuf);
+
+	/* update prompt accordingly to what has been passed */
+	if (rl_set_prompt(prompt) == -1)
+		return NULL;
+
+	if (rl_pre_input_hook)
+		(*rl_pre_input_hook)(NULL, 0);
+
+	if (rl_event_hook && !(e->el_flags&NO_TTY)) {
+		el_set(e, EL_GETCFN, _rl_event_read_char);
+		used_event_hook = 1;
+	}
+
+	if (!rl_event_hook && used_event_hook) {
+		el_set(e, EL_GETCFN, EL_BUILTIN_GETCFN);
+		used_event_hook = 0;
+	}
+
+	rl_already_prompted = 0;
+
+	/* get one line from input stream */
+	ret = el_gets(e, &count);
+
+	if (ret && count > 0) {
+		int lastidx;
+
+		buf = strdup(ret);
+		if (buf == NULL)
+			return NULL;
+		lastidx = count - 1;
+		if (buf[lastidx] == '\n')
+			buf[lastidx] = '\0';
+	} else
+		buf = NULL;
+
+	history(h, &ev, H_GETSIZE);
+	history_length = ev.num;
+
+	return buf;
+}
+
+/*
+ * history functions
+ */
+
+/*
+ * is normally called before application starts to use
+ * history expansion functions
+ */
+void
+using_history(void)
+{
+	if (h == NULL || e == NULL)
+		rl_initialize();
+}
+
+
+/*
+ * substitute ``what'' with ``with'', returning resulting string; if
+ * globally == 1, substitutes all occurrences of what, otherwise only the
+ * first one
+ */
+static char *
+_rl_compat_sub(const char *str, const char *what, const char *with,
+    int globally)
+{
+	const	char	*s;
+	char	*r, *result;
+	size_t	len, with_len, what_len;
+
+	len = strlen(str);
+	with_len = strlen(with);
+	what_len = strlen(what);
+
+	/* calculate length we need for result */
+	s = str;
+	while (*s) {
+		if (*s == *what && !strncmp(s, what, what_len)) {
+			len += with_len - what_len;
+			if (!globally)
+				break;
+			s += what_len;
+		} else
+			s++;
+	}
+	r = result = el_malloc((len + 1) * sizeof(*r));
+	if (result == NULL)
+		return NULL;
+	s = str;
+	while (*s) {
+		if (*s == *what && !strncmp(s, what, what_len)) {
+			(void)strncpy(r, with, with_len);
+			r += with_len;
+			s += what_len;
+			if (!globally) {
+				(void)strcpy(r, s);
+				return result;
+			}
+		} else
+			*r++ = *s++;
+	}
+	*r = '\0';
+	return result;
+}
+
+static	char	*last_search_pat;	/* last !?pat[?] search pattern */
+static	char	*last_search_match;	/* last !?pat[?] that matched */
+
+const char *
+get_history_event(const char *cmd, int *cindex, int qchar)
+{
+	int idx, sign, sub, num, begin, ret;
+	size_t len;
+	char	*pat;
+	const char *rptr;
+	HistEvent ev;
+
+	idx = *cindex;
+	if (cmd[idx++] != history_expansion_char)
+		return NULL;
+
+	/* find out which event to take */
+	if (cmd[idx] == history_expansion_char || cmd[idx] == '\0') {
+		if (history(h, &ev, H_FIRST) != 0)
+			return NULL;
+		*cindex = cmd[idx]? (idx + 1):idx;
+		return ev.str;
+	}
+	sign = 0;
+	if (cmd[idx] == '-') {
+		sign = 1;
+		idx++;
+	}
+
+	if ('0' <= cmd[idx] && cmd[idx] <= '9') {
+		HIST_ENTRY *rl_he;
+
+		num = 0;
+		while (cmd[idx] && '0' <= cmd[idx] && cmd[idx] <= '9') {
+			num = num * 10 + cmd[idx] - '0';
+			idx++;
+		}
+		if (sign)
+			num = history_length - num + 1;
+
+		if (!(rl_he = history_get(num)))
+			return NULL;
+
+		*cindex = idx;
+		return rl_he->line;
+	}
+	sub = 0;
+	if (cmd[idx] == '?') {
+		sub = 1;
+		idx++;
+	}
+	begin = idx;
+	while (cmd[idx]) {
+		if (cmd[idx] == '\n')
+			break;
+		if (sub && cmd[idx] == '?')
+			break;
+		if (!sub && (cmd[idx] == ':' || cmd[idx] == ' '
+				    || cmd[idx] == '\t' || cmd[idx] == qchar))
+			break;
+		idx++;
+	}
+	len = (size_t)idx - (size_t)begin;
+	if (sub && cmd[idx] == '?')
+		idx++;
+	if (sub && len == 0 && last_search_pat && *last_search_pat)
+		pat = last_search_pat;
+	else if (len == 0)
+		return NULL;
+	else {
+		if ((pat = el_malloc((len + 1) * sizeof(*pat))) == NULL)
+			return NULL;
+		(void)strncpy(pat, cmd + begin, len);
+		pat[len] = '\0';
+	}
+
+	if (history(h, &ev, H_CURR) != 0) {
+		if (pat != last_search_pat)
+			el_free(pat);
+		return NULL;
+	}
+	num = ev.num;
+
+	if (sub) {
+		if (pat != last_search_pat) {
+			if (last_search_pat)
+				el_free(last_search_pat);
+			last_search_pat = pat;
+		}
+		ret = history_search(pat, -1);
+	} else
+		ret = history_search_prefix(pat, -1);
+
+	if (ret == -1) {
+		/* restore to end of list on failed search */
+		history(h, &ev, H_FIRST);
+		(void)fprintf(rl_outstream, "%s: Event not found\n", pat);
+		if (pat != last_search_pat)
+			el_free(pat);
+		return NULL;
+	}
+
+	if (sub && len) {
+		if (last_search_match && last_search_match != pat)
+			el_free(last_search_match);
+		last_search_match = pat;
+	}
+
+	if (pat != last_search_pat)
+		el_free(pat);
+
+	if (history(h, &ev, H_CURR) != 0)
+		return NULL;
+	*cindex = idx;
+	rptr = ev.str;
+
+	/* roll back to original position */
+	(void)history(h, &ev, H_SET, num);
+
+	return rptr;
+}
+
+/*
+ * the real function doing history expansion - takes as argument command
+ * to do and data upon which the command should be executed
+ * does expansion the way I've understood readline documentation
+ *
+ * returns 0 if data was not modified, 1 if it was and 2 if the string
+ * should be only printed and not executed; in case of error,
+ * returns -1 and *result points to NULL
+ * it's callers responsibility to free() string returned in *result
+ */
+static int
+_history_expand_command(const char *command, size_t offs, size_t cmdlen,
+    char **result)
+{
+	char *tmp, *search = NULL, *aptr;
+	const char *ptr, *cmd;
+	static char *from = NULL, *to = NULL;
+	int start, end, idx, has_mods = 0;
+	int p_on = 0, g_on = 0;
+
+	*result = NULL;
+	aptr = NULL;
+	ptr = NULL;
+
+	/* First get event specifier */
+	idx = 0;
+
+	if (strchr(":^*$", command[offs + 1])) {
+		char str[4];
+		/*
+		* "!:" is shorthand for "!!:".
+		* "!^", "!*" and "!$" are shorthand for
+		* "!!:^", "!!:*" and "!!:$" respectively.
+		*/
+		str[0] = str[1] = '!';
+		str[2] = '0';
+		ptr = get_history_event(str, &idx, 0);
+		idx = (command[offs + 1] == ':')? 1:0;
+		has_mods = 1;
+	} else {
+		if (command[offs + 1] == '#') {
+			/* use command so far */
+			if ((aptr = el_malloc((offs + 1) * sizeof(*aptr)))
+			    == NULL)
+				return -1;
+			(void)strncpy(aptr, command, offs);
+			aptr[offs] = '\0';
+			idx = 1;
+		} else {
+			int	qchar;
+
+			qchar = (offs > 0 && command[offs - 1] == '"')? '"':0;
+			ptr = get_history_event(command + offs, &idx, qchar);
+		}
+		has_mods = command[offs + (size_t)idx] == ':';
+	}
+
+	if (ptr == NULL && aptr == NULL)
+		return -1;
+
+	if (!has_mods) {
+		*result = strdup(aptr ? aptr : ptr);
+		if (aptr)
+			el_free(aptr);
+		if (*result == NULL)
+			return -1;
+		return 1;
+	}
+
+	cmd = command + offs + idx + 1;
+
+	/* Now parse any word designators */
+
+	if (*cmd == '%')	/* last word matched by ?pat? */
+		tmp = strdup(last_search_match? last_search_match:"");
+	else if (strchr("^*$-0123456789", *cmd)) {
+		start = end = -1;
+		if (*cmd == '^')
+			start = end = 1, cmd++;
+		else if (*cmd == '$')
+			start = -1, cmd++;
+		else if (*cmd == '*')
+			start = 1, cmd++;
+	       else if (*cmd == '-' || isdigit((unsigned char) *cmd)) {
+			start = 0;
+			while (*cmd && '0' <= *cmd && *cmd <= '9')
+				start = start * 10 + *cmd++ - '0';
+
+			if (*cmd == '-') {
+				if (isdigit((unsigned char) cmd[1])) {
+					cmd++;
+					end = 0;
+					while (*cmd && '0' <= *cmd && *cmd <= '9')
+						end = end * 10 + *cmd++ - '0';
+				} else if (cmd[1] == '$') {
+					cmd += 2;
+					end = -1;
+				} else {
+					cmd++;
+					end = -2;
+				}
+			} else if (*cmd == '*')
+				end = -1, cmd++;
+			else
+				end = start;
+		}
+		tmp = history_arg_extract(start, end, aptr? aptr:ptr);
+		if (tmp == NULL) {
+			(void)fprintf(rl_outstream, "%s: Bad word specifier",
+			    command + offs + idx);
+			if (aptr)
+				el_free(aptr);
+			return -1;
+		}
+	} else
+		tmp = strdup(aptr? aptr:ptr);
+
+	if (aptr)
+		el_free(aptr);
+
+	if (*cmd == '\0' || ((size_t)(cmd - (command + offs)) >= cmdlen)) {
+		*result = tmp;
+		return 1;
+	}
+
+	for (; *cmd; cmd++) {
+		if (*cmd == ':')
+			continue;
+		else if (*cmd == 'h') {		/* remove trailing path */
+			if ((aptr = strrchr(tmp, '/')) != NULL)
+				*aptr = '\0';
+		} else if (*cmd == 't') {	/* remove leading path */
+			if ((aptr = strrchr(tmp, '/')) != NULL) {
+				aptr = strdup(aptr + 1);
+				el_free(tmp);
+				tmp = aptr;
+			}
+		} else if (*cmd == 'r') {	/* remove trailing suffix */
+			if ((aptr = strrchr(tmp, '.')) != NULL)
+				*aptr = '\0';
+		} else if (*cmd == 'e') {	/* remove all but suffix */
+			if ((aptr = strrchr(tmp, '.')) != NULL) {
+				aptr = strdup(aptr);
+				el_free(tmp);
+				tmp = aptr;
+			}
+		} else if (*cmd == 'p')		/* print only */
+			p_on = 1;
+		else if (*cmd == 'g')
+			g_on = 2;
+		else if (*cmd == 's' || *cmd == '&') {
+			char *what, *with, delim;
+			size_t len, from_len;
+			size_t size;
+
+			if (*cmd == '&' && (from == NULL || to == NULL))
+				continue;
+			else if (*cmd == 's') {
+				delim = *(++cmd), cmd++;
+				size = 16;
+				what = el_realloc(from, size * sizeof(*what));
+				if (what == NULL) {
+					el_free(from);
+					el_free(tmp);
+					return 0;
+				}
+				len = 0;
+				for (; *cmd && *cmd != delim; cmd++) {
+					if (*cmd == '\\' && cmd[1] == delim)
+						cmd++;
+					if (len >= size) {
+						char *nwhat;
+						nwhat = el_realloc(what,
+						    (size <<= 1) *
+						    sizeof(*nwhat));
+						if (nwhat == NULL) {
+							el_free(what);
+							el_free(tmp);
+							return 0;
+						}
+						what = nwhat;
+					}
+					what[len++] = *cmd;
+				}
+				what[len] = '\0';
+				from = what;
+				if (*what == '\0') {
+					el_free(what);
+					if (search) {
+						from = strdup(search);
+						if (from == NULL) {
+							el_free(tmp);
+							return 0;
+						}
+					} else {
+						from = NULL;
+						el_free(tmp);
+						return -1;
+					}
+				}
+				cmd++;	/* shift after delim */
+				if (!*cmd)
+					continue;
+
+				size = 16;
+				with = el_realloc(to, size * sizeof(*with));
+				if (with == NULL) {
+					el_free(to);
+					el_free(tmp);
+					return -1;
+				}
+				len = 0;
+				from_len = strlen(from);
+				for (; *cmd && *cmd != delim; cmd++) {
+					if (len + from_len + 1 >= size) {
+						char *nwith;
+						size += from_len + 1;
+						nwith = el_realloc(with,
+						    size * sizeof(*nwith));
+						if (nwith == NULL) {
+							el_free(with);
+							el_free(tmp);
+							return -1;
+						}
+						with = nwith;
+					}
+					if (*cmd == '&') {
+						/* safe */
+						(void)strcpy(&with[len], from);
+						len += from_len;
+						continue;
+					}
+					if (*cmd == '\\'
+					    && (*(cmd + 1) == delim
+						|| *(cmd + 1) == '&'))
+						cmd++;
+					with[len++] = *cmd;
+				}
+				with[len] = '\0';
+				to = with;
+			}
+
+			aptr = _rl_compat_sub(tmp, from, to, g_on);
+			if (aptr) {
+				el_free(tmp);
+				tmp = aptr;
+			}
+			g_on = 0;
+		}
+	}
+	*result = tmp;
+	return p_on? 2:1;
+}
+
+
+/*
+ * csh-style history expansion
+ */
+int
+history_expand(char *str, char **output)
+{
+	int ret = 0;
+	size_t idx, i, size;
+	char *tmp, *result;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	if (history_expansion_char == 0) {
+		*output = strdup(str);
+		return 0;
+	}
+
+	*output = NULL;
+	if (str[0] == history_subst_char) {
+		/* ^foo^foo2^ is equivalent to !!:s^foo^foo2^ */
+		*output = el_malloc((strlen(str) + 4 + 1) * sizeof(**output));
+		if (*output == NULL)
+			return 0;
+		(*output)[0] = (*output)[1] = history_expansion_char;
+		(*output)[2] = ':';
+		(*output)[3] = 's';
+		(void)strcpy((*output) + 4, str);
+		str = *output;
+	} else {
+		*output = strdup(str);
+		if (*output == NULL)
+			return 0;
+	}
+
+#define ADD_STRING(what, len, fr)					\
+	{								\
+		if (idx + len + 1 > size) {				\
+			char *nresult = el_realloc(result,		\
+			    (size += len + 1) * sizeof(*nresult));	\
+			if (nresult == NULL) {				\
+				el_free(*output);			\
+				if (/*CONSTCOND*/fr)			\
+					el_free(tmp);			\
+				return 0;				\
+			}						\
+			result = nresult;				\
+		}							\
+		(void)strncpy(&result[idx], what, len);			\
+		idx += len;						\
+		result[idx] = '\0';					\
+	}
+
+	result = NULL;
+	size = idx = 0;
+	tmp = NULL;
+	for (i = 0; str[i];) {
+		int qchar, loop_again;
+		size_t len, start, j;
+
+		qchar = 0;
+		loop_again = 1;
+		start = j = i;
+loop:
+		for (; str[j]; j++) {
+			if (str[j] == '\\' &&
+			    str[j + 1] == history_expansion_char) {
+				(void)strcpy(&str[j], &str[j + 1]);
+				continue;
+			}
+			if (!loop_again) {
+				if (isspace((unsigned char) str[j])
+				    || str[j] == qchar)
+					break;
+			}
+			if (str[j] == history_expansion_char
+			    && !strchr(history_no_expand_chars, str[j + 1])
+			    && (!history_inhibit_expansion_function ||
+			    (*history_inhibit_expansion_function)(str,
+			    (int)j) == 0))
+				break;
+		}
+
+		if (str[j] && loop_again) {
+			i = j;
+			qchar = (j > 0 && str[j - 1] == '"' )? '"':0;
+			j++;
+			if (str[j] == history_expansion_char)
+				j++;
+			loop_again = 0;
+			goto loop;
+		}
+		len = i - start;
+		ADD_STRING(&str[start], len, 0);
+
+		if (str[i] == '\0' || str[i] != history_expansion_char) {
+			len = j - i;
+			ADD_STRING(&str[i], len, 0);
+			if (start == 0)
+				ret = 0;
+			else
+				ret = 1;
+			break;
+		}
+		ret = _history_expand_command (str, i, (j - i), &tmp);
+		if (ret > 0 && tmp) {
+			len = strlen(tmp);
+			ADD_STRING(tmp, len, 1);
+		}
+		if (tmp) {
+			el_free(tmp);
+			tmp = NULL;
+		}
+		i = j;
+	}
+
+	/* ret is 2 for "print only" option */
+	if (ret == 2) {
+		add_history(result);
+#ifdef GDB_411_HACK
+		/* gdb 4.11 has been shipped with readline, where */
+		/* history_expand() returned -1 when the line	  */
+		/* should not be executed; in readline 2.1+	  */
+		/* it should return 2 in such a case		  */
+		ret = -1;
+#endif
+	}
+	el_free(*output);
+	*output = result;
+
+	return ret;
+}
+
+/*
+* Return a string consisting of arguments of "str" from "start" to "end".
+*/
+char *
+history_arg_extract(int start, int end, const char *str)
+{
+	size_t  i, len, max;
+	char	**arr, *result = NULL;
+
+	arr = history_tokenize(str);
+	if (!arr)
+		return NULL;
+	if (arr && *arr == NULL)
+		goto out;
+
+	for (max = 0; arr[max]; max++)
+		continue;
+	max--;
+
+	if (start == '$')
+		start = (int)max;
+	if (end == '$')
+		end = (int)max;
+	if (end < 0)
+		end = (int)max + end + 1;
+	if (start < 0)
+		start = end;
+
+	if (start < 0 || end < 0 || (size_t)start > max ||
+	    (size_t)end > max || start > end)
+		goto out;
+
+	for (i = (size_t)start, len = 0; i <= (size_t)end; i++)
+		len += strlen(arr[i]) + 1;
+	len++;
+	result = el_malloc(len * sizeof(*result));
+	if (result == NULL)
+		goto out;
+
+	for (i = (size_t)start, len = 0; i <= (size_t)end; i++) {
+		(void)strcpy(result + len, arr[i]);
+		len += strlen(arr[i]);
+		if (i < (size_t)end)
+			result[len++] = ' ';
+	}
+	result[len] = '\0';
+
+out:
+	for (i = 0; arr[i]; i++)
+		el_free(arr[i]);
+	el_free(arr);
+
+	return result;
+}
+
+/*
+ * Parse the string into individual tokens,
+ * similar to how shell would do it.
+ */
+char **
+history_tokenize(const char *str)
+{
+	int size = 1, idx = 0, i, start;
+	size_t len;
+	char **result = NULL, *temp, delim = '\0';
+
+	for (i = 0; str[i];) {
+		while (isspace((unsigned char) str[i]))
+			i++;
+		start = i;
+		for (; str[i];) {
+			if (str[i] == '\\') {
+				if (str[i+1] != '\0')
+					i++;
+			} else if (str[i] == delim)
+				delim = '\0';
+			else if (!delim &&
+				    (isspace((unsigned char) str[i]) ||
+				strchr("()<>;&|$", str[i])))
+				break;
+			else if (!delim && strchr("'`\"", str[i]))
+				delim = str[i];
+			if (str[i])
+				i++;
+		}
+
+		if (idx + 2 >= size) {
+			char **nresult;
+			size <<= 1;
+			nresult = el_realloc(result, (size_t)size * sizeof(*nresult));
+			if (nresult == NULL) {
+				el_free(result);
+				return NULL;
+			}
+			result = nresult;
+		}
+		len = (size_t)i - (size_t)start;
+		temp = el_malloc((size_t)(len + 1) * sizeof(*temp));
+		if (temp == NULL) {
+			for (i = 0; i < idx; i++)
+				el_free(result[i]);
+			el_free(result);
+			return NULL;
+		}
+		(void)strncpy(temp, &str[start], len);
+		temp[len] = '\0';
+		result[idx++] = temp;
+		result[idx] = NULL;
+		if (str[i])
+			i++;
+	}
+	return result;
+}
+
+
+/*
+ * limit size of history record to ``max'' events
+ */
+void
+stifle_history(int max)
+{
+	HistEvent ev;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	if (history(h, &ev, H_SETSIZE, max) == 0)
+		max_input_history = max;
+}
+
+
+/*
+ * "unlimit" size of history - set the limit to maximum allowed int value
+ */
+int
+unstifle_history(void)
+{
+	HistEvent ev;
+	int omax;
+
+	history(h, &ev, H_SETSIZE, INT_MAX);
+	omax = max_input_history;
+	max_input_history = INT_MAX;
+	return omax;		/* some value _must_ be returned */
+}
+
+
+int
+history_is_stifled(void)
+{
+
+	/* cannot return true answer */
+	return max_input_history != INT_MAX;
+}
+
+static const char _history_tmp_template[] = "/tmp/.historyXXXXXX";
+
+int
+history_truncate_file (const char *filename, int nlines)
+{
+	int ret = 0;
+	FILE *fp, *tp;
+	char template[sizeof(_history_tmp_template)];
+	char buf[4096];
+	int fd;
+	char *cp;
+	off_t off;
+	int count = 0;
+	ssize_t left = 0;
+
+	if (filename == NULL && (filename = _default_history_file()) == NULL)
+		return errno;
+	if ((fp = fopen(filename, "r+")) == NULL)
+		return errno;
+	strcpy(template, _history_tmp_template);
+	if ((fd = mkstemp(template)) == -1) {
+		ret = errno;
+		goto out1;
+	}
+
+	if ((tp = fdopen(fd, "r+")) == NULL) {
+		close(fd);
+		ret = errno;
+		goto out2;
+	}
+
+	for(;;) {
+		if (fread(buf, sizeof(buf), (size_t)1, fp) != 1) {
+			if (ferror(fp)) {
+				ret = errno;
+				break;
+			}
+			if (fseeko(fp, (off_t)sizeof(buf) * count, SEEK_SET) ==
+			    (off_t)-1) {
+				ret = errno;
+				break;
+			}
+			left = (ssize_t)fread(buf, (size_t)1, sizeof(buf), fp);
+			if (ferror(fp)) {
+				ret = errno;
+				break;
+			}
+			if (left == 0) {
+				count--;
+				left = sizeof(buf);
+			} else if (fwrite(buf, (size_t)left, (size_t)1, tp)
+			    != 1) {
+				ret = errno;
+				break;
+			}
+			fflush(tp);
+			break;
+		}
+		if (fwrite(buf, sizeof(buf), (size_t)1, tp) != 1) {
+			ret = errno;
+			break;
+		}
+		count++;
+	}
+	if (ret)
+		goto out3;
+	cp = buf + left - 1;
+	if(*cp != '\n')
+		cp++;
+	for(;;) {
+		while (--cp >= buf) {
+			if (*cp == '\n') {
+				if (--nlines == 0) {
+					if (++cp >= buf + sizeof(buf)) {
+						count++;
+						cp = buf;
+					}
+					break;
+				}
+			}
+		}
+		if (nlines <= 0 || count == 0)
+			break;
+		count--;
+		if (fseeko(tp, (off_t)sizeof(buf) * count, SEEK_SET) < 0) {
+			ret = errno;
+			break;
+		}
+		if (fread(buf, sizeof(buf), (size_t)1, tp) != 1) {
+			if (ferror(tp)) {
+				ret = errno;
+				break;
+			}
+			ret = EAGAIN;
+			break;
+		}
+		cp = buf + sizeof(buf);
+	}
+
+	if (ret || nlines > 0)
+		goto out3;
+
+	if (fseeko(fp, (off_t)0, SEEK_SET) == (off_t)-1) {
+		ret = errno;
+		goto out3;
+	}
+
+	if (fseeko(tp, (off_t)sizeof(buf) * count + (cp - buf), SEEK_SET) ==
+	    (off_t)-1) {
+		ret = errno;
+		goto out3;
+	}
+
+	for(;;) {
+		if ((left = (ssize_t)fread(buf, (size_t)1, sizeof(buf), tp)) == 0) {
+			if (ferror(fp))
+				ret = errno;
+			break;
+		}
+		if (fwrite(buf, (size_t)left, (size_t)1, fp) != 1) {
+			ret = errno;
+			break;
+		}
+	}
+	fflush(fp);
+	if((off = ftello(fp)) > 0)
+		(void)ftruncate(fileno(fp), off);
+out3:
+	fclose(tp);
+out2:
+	unlink(template);
+out1:
+	fclose(fp);
+
+	return ret;
+}
+
+
+/*
+ * read history from a file given
+ */
+int
+read_history(const char *filename)
+{
+	HistEvent ev;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+	if (filename == NULL && (filename = _default_history_file()) == NULL)
+		return errno;
+	return history(h, &ev, H_LOAD, filename) == -1 ?
+	    (errno ? errno : EINVAL) : 0;
+}
+
+
+/*
+ * write history to a file given
+ */
+int
+write_history(const char *filename)
+{
+	HistEvent ev;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+	if (filename == NULL && (filename = _default_history_file()) == NULL)
+		return errno;
+	return history(h, &ev, H_SAVE, filename) == -1 ?
+	    (errno ? errno : EINVAL) : 0;
+}
+
+
+/*
+ * returns history ``num''th event
+ *
+ * returned pointer points to static variable
+ */
+HIST_ENTRY *
+history_get(int num)
+{
+	static HIST_ENTRY she;
+	HistEvent ev;
+	int curr_num;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	/* save current position */
+	if (history(h, &ev, H_CURR) != 0)
+		return NULL;
+	curr_num = ev.num;
+
+	/* start from the oldest */
+	if (history(h, &ev, H_LAST) != 0)
+		return NULL;	/* error */
+
+	/* look forwards for event matching specified offset */
+	if (history(h, &ev, H_NEXT_EVDATA, num, &she.data))
+		return NULL;
+
+	she.line = ev.str;
+
+	/* restore pointer to where it was */
+	(void)history(h, &ev, H_SET, curr_num);
+
+	return &she;
+}
+
+
+/*
+ * add the line to history table
+ */
+int
+add_history(const char *line)
+{
+	HistEvent ev;
+
+	if (line == NULL)
+		return 0;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	(void)history(h, &ev, H_ENTER, line);
+	if (history(h, &ev, H_GETSIZE) == 0)
+		history_length = ev.num;
+
+	return !(history_length > 0); /* return 0 if all is okay */
+}
+
+
+/*
+ * remove the specified entry from the history list and return it.
+ */
+HIST_ENTRY *
+remove_history(int num)
+{
+	HIST_ENTRY *he;
+	HistEvent ev;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	if ((he = el_malloc(sizeof(*he))) == NULL)
+		return NULL;
+
+	if (history(h, &ev, H_DELDATA, num, &he->data) != 0) {
+		el_free(he);
+		return NULL;
+	}
+
+	he->line = ev.str;
+	if (history(h, &ev, H_GETSIZE) == 0)
+		history_length = ev.num;
+
+	return he;
+}
+
+
+/*
+ * replace the line and data of the num-th entry
+ */
+HIST_ENTRY *
+replace_history_entry(int num, const char *line, histdata_t data)
+{
+	HIST_ENTRY *he;
+	HistEvent ev;
+	int curr_num;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	/* save current position */
+	if (history(h, &ev, H_CURR) != 0)
+		return NULL;
+	curr_num = ev.num;
+
+	/* start from the oldest */
+	if (history(h, &ev, H_LAST) != 0)
+		return NULL;	/* error */
+
+	if ((he = el_malloc(sizeof(*he))) == NULL)
+		return NULL;
+
+	/* look forwards for event matching specified offset */
+	if (history(h, &ev, H_NEXT_EVDATA, num, &he->data))
+		goto out;
+
+	he->line = strdup(ev.str);
+	if (he->line == NULL)
+		goto out;
+
+	if (history(h, &ev, H_REPLACE, line, data))
+		goto out;
+
+	/* restore pointer to where it was */
+	if (history(h, &ev, H_SET, curr_num))
+		goto out;
+
+	return he;
+out:
+	el_free(he);
+	return NULL;
+}
+
+/*
+ * clear the history list - delete all entries
+ */
+void
+clear_history(void)
+{
+	HistEvent ev;
+
+	(void)history(h, &ev, H_CLEAR);
+	history_length = 0;
+}
+
+
+/*
+ * returns offset of the current history event
+ */
+int
+where_history(void)
+{
+	HistEvent ev;
+	int curr_num, off;
+
+	if (history(h, &ev, H_CURR) != 0)
+		return 0;
+	curr_num = ev.num;
+
+	(void)history(h, &ev, H_FIRST);
+	off = 1;
+	while (ev.num != curr_num && history(h, &ev, H_NEXT) == 0)
+		off++;
+
+	return off;
+}
+
+
+/*
+ * returns current history event or NULL if there is no such event
+ */
+HIST_ENTRY *
+current_history(void)
+{
+
+	return _move_history(H_CURR);
+}
+
+
+/*
+ * returns total number of bytes history events' data are using
+ */
+int
+history_total_bytes(void)
+{
+	HistEvent ev;
+	int curr_num;
+	size_t size;
+
+	if (history(h, &ev, H_CURR) != 0)
+		return -1;
+	curr_num = ev.num;
+
+	(void)history(h, &ev, H_FIRST);
+	size = 0;
+	do
+		size += strlen(ev.str) * sizeof(*ev.str);
+	while (history(h, &ev, H_NEXT) == 0);
+
+	/* get to the same position as before */
+	history(h, &ev, H_PREV_EVENT, curr_num);
+
+	return (int)size;
+}
+
+
+/*
+ * sets the position in the history list to ``pos''
+ */
+int
+history_set_pos(int pos)
+{
+	HistEvent ev;
+	int curr_num;
+
+	if (pos >= history_length || pos < 0)
+		return -1;
+
+	(void)history(h, &ev, H_CURR);
+	curr_num = ev.num;
+
+	/*
+	 * use H_DELDATA to set to nth history (without delete) by passing
+	 * (void **)-1
+	 */
+	if (history(h, &ev, H_DELDATA, pos, (void **)-1)) {
+		(void)history(h, &ev, H_SET, curr_num);
+		return -1;
+	}
+	return 0;
+}
+
+
+/*
+ * returns previous event in history and shifts pointer accordingly
+ */
+HIST_ENTRY *
+previous_history(void)
+{
+
+	return _move_history(H_PREV);
+}
+
+
+/*
+ * returns next event in history and shifts pointer accordingly
+ */
+HIST_ENTRY *
+next_history(void)
+{
+
+	return _move_history(H_NEXT);
+}
+
+
+/*
+ * searches for first history event containing the str
+ */
+int
+history_search(const char *str, int direction)
+{
+	HistEvent ev;
+	const char *strp;
+	int curr_num;
+
+	if (history(h, &ev, H_CURR) != 0)
+		return -1;
+	curr_num = ev.num;
+
+	for (;;) {
+		if ((strp = strstr(ev.str, str)) != NULL)
+			return (int)(strp - ev.str);
+		if (history(h, &ev, direction < 0 ? H_NEXT:H_PREV) != 0)
+			break;
+	}
+	(void)history(h, &ev, H_SET, curr_num);
+	return -1;
+}
+
+
+/*
+ * searches for first history event beginning with str
+ */
+int
+history_search_prefix(const char *str, int direction)
+{
+	HistEvent ev;
+
+	return (history(h, &ev, direction < 0 ?
+	    H_PREV_STR : H_NEXT_STR, str));
+}
+
+
+/*
+ * search for event in history containing str, starting at offset
+ * abs(pos); continue backward, if pos<0, forward otherwise
+ */
+/* ARGSUSED */
+int
+history_search_pos(const char *str,
+		   int direction __attribute__((__unused__)), int pos)
+{
+	HistEvent ev;
+	int curr_num, off;
+
+	off = (pos > 0) ? pos : -pos;
+	pos = (pos > 0) ? 1 : -1;
+
+	if (history(h, &ev, H_CURR) != 0)
+		return -1;
+	curr_num = ev.num;
+
+	if (history_set_pos(off) != 0 || history(h, &ev, H_CURR) != 0)
+		return -1;
+
+	for (;;) {
+		if (strstr(ev.str, str))
+			return off;
+		if (history(h, &ev, (pos < 0) ? H_PREV : H_NEXT) != 0)
+			break;
+	}
+
+	/* set "current" pointer back to previous state */
+	(void)history(h, &ev,
+	    pos < 0 ? H_NEXT_EVENT : H_PREV_EVENT, curr_num);
+
+	return -1;
+}
+
+
+/********************************/
+/* completion functions */
+
+char *
+tilde_expand(char *name)
+{
+	return fn_tilde_expand(name);
+}
+
+char *
+filename_completion_function(const char *name, int state)
+{
+	return fn_filename_completion_function(name, state);
+}
+
+/*
+ * a completion generator for usernames; returns _first_ username
+ * which starts with supplied text
+ * text contains a partial username preceded by random character
+ * (usually '~'); state resets search from start (??? should we do that anyway)
+ * it's callers responsibility to free returned value
+ */
+char *
+username_completion_function(const char *text, int state)
+{
+	struct passwd *pass = NULL;
+
+	if (text[0] == '\0')
+		return NULL;
+
+	if (*text == '~')
+		text++;
+
+	if (state == 0)
+		setpwent();
+
+	while (
+	    (pass = getpwent()) != NULL
+	    && text[0] == pass->pw_name[0]
+	    && strcmp(text, pass->pw_name) == 0)
+		continue;
+
+	if (pass == NULL) {
+		endpwent();
+		return NULL;
+	}
+	return strdup(pass->pw_name);
+}
+
+
+/*
+ * el-compatible wrapper to send TSTP on ^Z
+ */
+/* ARGSUSED */
+static unsigned char
+_el_rl_tstp(EditLine *el __attribute__((__unused__)), int ch __attribute__((__unused__)))
+{
+	(void)kill(0, SIGTSTP);
+	return CC_NORM;
+}
+
+/*
+ * Display list of strings in columnar format on readline's output stream.
+ * 'matches' is list of strings, 'len' is number of strings in 'matches',
+ * 'max' is maximum length of string in 'matches'.
+ */
+void
+rl_display_match_list(char **matches, int len, int max)
+{
+
+	fn_display_match_list(e, matches, (size_t)len, (size_t)max);
+}
+
+static const char *
+/*ARGSUSED*/
+_rl_completion_append_character_function(const char *dummy
+    __attribute__((__unused__)))
+{
+	static char buf[2];
+	buf[0] = (char)rl_completion_append_character;
+	buf[1] = '\0';
+	return buf;
+}
+
+
+/*
+ * complete word at current point
+ */
+/* ARGSUSED */
+int
+rl_complete(int ignore __attribute__((__unused__)), int invoking_key)
+{
+#ifdef WIDECHAR
+	static ct_buffer_t wbreak_conv, sprefix_conv;
+#endif
+	char *breakchars;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	if (rl_inhibit_completion) {
+		char arr[2];
+		arr[0] = (char)invoking_key;
+		arr[1] = '\0';
+		el_insertstr(e, arr);
+		return CC_REFRESH;
+	}
+
+	if (rl_completion_word_break_hook != NULL)
+		breakchars = (*rl_completion_word_break_hook)();
+	else
+		breakchars = rl_basic_word_break_characters;
+
+	/* Just look at how many global variables modify this operation! */
+	return fn_complete(e,
+	    (CPFunction *)rl_completion_entry_function,
+	    rl_attempted_completion_function,
+	    ct_decode_string(rl_basic_word_break_characters, &wbreak_conv),
+	    ct_decode_string(breakchars, &sprefix_conv),
+	    _rl_completion_append_character_function,
+	    (size_t)rl_completion_query_items,
+	    &rl_completion_type, &rl_attempted_completion_over,
+	    &rl_point, &rl_end);
+
+
+}
+
+
+/* ARGSUSED */
+static unsigned char
+_el_rl_complete(EditLine *el __attribute__((__unused__)), int ch)
+{
+	return (unsigned char)rl_complete(0, ch);
+}
+
+/*
+ * misc other functions
+ */
+
+/*
+ * bind key c to readline-type function func
+ */
+int
+rl_bind_key(int c, rl_command_func_t *func)
+{
+	int retval = -1;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	if (func == rl_insert) {
+		/* XXX notice there is no range checking of ``c'' */
+		e->el_map.key[c] = ED_INSERT;
+		retval = 0;
+	}
+	return retval;
+}
+
+
+/*
+ * read one key from input - handles chars pushed back
+ * to input stream also
+ */
+int
+rl_read_key(void)
+{
+	char fooarr[2 * sizeof(int)];
+
+	if (e == NULL || h == NULL)
+		rl_initialize();
+
+	return el_getc(e, fooarr);
+}
+
+
+/*
+ * reset the terminal
+ */
+/* ARGSUSED */
+void
+rl_reset_terminal(const char *p __attribute__((__unused__)))
+{
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+	el_reset(e);
+}
+
+
+/*
+ * insert character ``c'' back into input stream, ``count'' times
+ */
+int
+rl_insert(int count, int c)
+{
+	char arr[2];
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	/* XXX - int -> char conversion can lose on multichars */
+	arr[0] = (char)c;
+	arr[1] = '\0';
+
+	for (; count > 0; count--)
+		el_push(e, arr);
+
+	return 0;
+}
+
+int
+rl_insert_text(const char *text)
+{
+	if (!text || *text == 0)
+		return 0;
+
+	if (h == NULL || e == NULL)
+		rl_initialize();
+
+	if (el_insertstr(e, text) < 0)
+		return 0;
+	return (int)strlen(text);
+}
+
+/*ARGSUSED*/
+int
+rl_newline(int count __attribute__((__unused__)),
+    int c __attribute__((__unused__)))
+{
+	/*
+	 * Readline-4.0 appears to ignore the args.
+	 */
+	return rl_insert(1, '\n');
+}
+
+/*ARGSUSED*/
+static unsigned char
+rl_bind_wrapper(EditLine *el __attribute__((__unused__)), unsigned char c)
+{
+	if (map[c] == NULL)
+	    return CC_ERROR;
+
+	_rl_update_pos();
+
+	(*map[c])(NULL, c);
+
+	/* If rl_done was set by the above call, deal with it here */
+	if (rl_done)
+		return CC_EOF;
+
+	return CC_NORM;
+}
+
+int
+rl_add_defun(const char *name, Function *fun, int c)
+{
+	char dest[8];
+	if ((size_t)c >= sizeof(map) / sizeof(map[0]) || c < 0)
+		return -1;
+	map[(unsigned char)c] = fun;
+	el_set(e, EL_ADDFN, name, name, rl_bind_wrapper);
+	vis(dest, c, VIS_WHITE|VIS_NOSLASH, 0);
+	el_set(e, EL_BIND, dest, name, NULL);
+	return 0;
+}
+
+void
+rl_callback_read_char(void)
+{
+	int count = 0, done = 0;
+	const char *buf = el_gets(e, &count);
+	char *wbuf;
+
+	if (buf == NULL || count-- <= 0)
+		return;
+	if (count == 0 && buf[0] == e->el_tty.t_c[TS_IO][C_EOF])
+		done = 1;
+	if (buf[count] == '\n' || buf[count] == '\r')
+		done = 2;
+
+	if (done && rl_linefunc != NULL) {
+		el_set(e, EL_UNBUFFERED, 0);
+		if (done == 2) {
+		    if ((wbuf = strdup(buf)) != NULL)
+			wbuf[count] = '\0';
+		} else
+			wbuf = NULL;
+		(*(void (*)(const char *))rl_linefunc)(wbuf);
+		//el_set(e, EL_UNBUFFERED, 1);
+	}
+}
+
+void 
+rl_callback_handler_install(const char *prompt, VCPFunction *linefunc)
+{
+	if (e == NULL) {
+		rl_initialize();
+	}
+	(void)rl_set_prompt(prompt);
+	rl_linefunc = linefunc;
+	el_set(e, EL_UNBUFFERED, 1);
+}   
+
+void 
+rl_callback_handler_remove(void)
+{
+	el_set(e, EL_UNBUFFERED, 0);
+	rl_linefunc = NULL;
+}
+
+void
+rl_redisplay(void)
+{
+	char a[2];
+	a[0] = (char)e->el_tty.t_c[TS_IO][C_REPRINT];
+	a[1] = '\0';
+	el_push(e, a);
+}
+
+int
+rl_get_previous_history(int count, int key)
+{
+	char a[2];
+	a[0] = (char)key;
+	a[1] = '\0';
+	while (count--)
+		el_push(e, a);
+	return 0;
+}
+
+void
+/*ARGSUSED*/
+rl_prep_terminal(int meta_flag __attribute__((__unused__)))
+{
+	el_set(e, EL_PREP_TERM, 1);
+}
+
+void
+rl_deprep_terminal(void)
+{
+	el_set(e, EL_PREP_TERM, 0);
+}
+
+int
+rl_read_init_file(const char *s)
+{
+	return el_source(e, s);
+}
+
+int
+rl_parse_and_bind(const char *line)
+{
+	const char **argv;
+	int argc;
+	Tokenizer *tok;
+
+	tok = tok_init(NULL);
+	tok_str(tok, line, &argc, &argv);
+	argc = el_parse(e, argc, argv);
+	tok_end(tok);
+	return argc ? 1 : 0;
+}
+
+int
+rl_variable_bind(const char *var, const char *value)
+{
+	/*
+	 * The proper return value is undocument, but this is what the
+	 * readline source seems to do.
+	 */
+	return el_set(e, EL_BIND, "", var, value, NULL) == -1 ? 1 : 0;
+}
+
+void
+rl_stuff_char(int c)
+{
+	char buf[2];
+
+	buf[0] = (char)c;
+	buf[1] = '\0';
+	el_insertstr(e, buf);
+}
+
+static int
+_rl_event_read_char(EditLine *el, char *cp)
+{
+	int	n;
+	ssize_t num_read = 0;
+
+	*cp = '\0';
+	while (rl_event_hook) {
+
+		(*rl_event_hook)();
+
+#if defined(FIONREAD)
+		if (ioctl(el->el_infd, FIONREAD, &n) < 0)
+			return -1;
+		if (n)
+			num_read = read(el->el_infd, cp, (size_t)1);
+		else
+			num_read = 0;
+#elif defined(F_SETFL) && defined(O_NDELAY)
+		if ((n = fcntl(el->el_infd, F_GETFL, 0)) < 0)
+			return -1;
+		if (fcntl(el->el_infd, F_SETFL, n|O_NDELAY) < 0)
+			return -1;
+		num_read = read(el->el_infd, cp, 1);
+		if (fcntl(el->el_infd, F_SETFL, n))
+			return -1;
+#else
+		/* not non-blocking, but what you gonna do? */
+		num_read = read(el->el_infd, cp, 1);
+		return -1;
+#endif
+
+		if (num_read < 0 && errno == EAGAIN)
+			continue;
+		if (num_read == 0)
+			continue;
+		break;
+	}
+	if (!rl_event_hook)
+		el_set(el, EL_GETCFN, EL_BUILTIN_GETCFN);
+	return (int)num_read;
+}
+
+static void
+_rl_update_pos(void)
+{
+	const LineInfo *li = el_line(e);
+
+	rl_point = (int)(li->cursor - li->buffer);
+	rl_end = (int)(li->lastchar - li->buffer);
+}
+
+void
+rl_get_screen_size(int *rows, int *cols)
+{
+	if (rows)
+		el_get(e, EL_GETTC, "li", rows, (void *)0);
+	if (cols)
+		el_get(e, EL_GETTC, "co", cols, (void *)0);
+}
+
+void
+rl_set_screen_size(int rows, int cols)
+{
+	char buf[64];
+	(void)snprintf(buf, sizeof(buf), "%d", rows);
+	el_set(e, EL_SETTC, "li", buf, NULL);
+	(void)snprintf(buf, sizeof(buf), "%d", cols);
+	el_set(e, EL_SETTC, "co", buf, NULL);
+}
+
+char **
+rl_completion_matches(const char *str, rl_compentry_func_t *fun)
+{
+	size_t len, max, i, j, min;
+	char **list, *match, *a, *b;
+
+	len = 1;
+	max = 10;
+	if ((list = el_malloc(max * sizeof(*list))) == NULL)
+		return NULL;
+
+	while ((match = (*fun)(str, (int)(len - 1))) != NULL) {
+		list[len++] = match;
+		if (len == max) {
+			char **nl;
+			max += 10;
+			if ((nl = el_realloc(list, max * sizeof(*nl))) == NULL)
+				goto out;
+			list = nl;
+		}
+	}
+	if (len == 1)
+		goto out;
+	list[len] = NULL;
+	if (len == 2) {
+		if ((list[0] = strdup(list[1])) == NULL)
+			goto out;
+		return list;
+	}
+	qsort(&list[1], len - 1, sizeof(*list),
+	    (int (*)(const void *, const void *)) strcmp);
+	min = SIZE_T_MAX;
+	for (i = 1, a = list[i]; i < len - 1; i++, a = b) {
+		b = list[i + 1];
+		for (j = 0; a[j] && a[j] == b[j]; j++)
+			continue;
+		if (min > j)
+			min = j;
+	}
+	if (min == 0 && *str) {
+		if ((list[0] = strdup(str)) == NULL)
+			goto out;
+	} else {
+		if ((list[0] = el_malloc((min + 1) * sizeof(*list[0]))) == NULL)
+			goto out;
+		(void)memcpy(list[0], list[1], min);
+		list[0][min] = '\0';
+	}
+	return list;
+		
+out:
+	el_free(list);
+	return NULL;
+}
+
+char *
+rl_filename_completion_function (const char *text, int state)
+{
+	return fn_filename_completion_function(text, state);
+}
+
+void
+rl_forced_update_display(void)
+{
+	el_set(e, EL_REFRESH);
+}
+
+int
+_rl_abort_internal(void)
+{
+	el_beep(e);
+	longjmp(topbuf, 1);
+	/*NOTREACHED*/
+}
+
+int
+_rl_qsort_string_compare(char **s1, char **s2)
+{
+	return strcoll(*s1, *s2);
+}
+
+HISTORY_STATE *
+history_get_history_state(void)
+{
+	HISTORY_STATE *hs;
+
+	if ((hs = el_malloc(sizeof(*hs))) == NULL)
+		return NULL;
+	hs->length = history_length;
+	return hs;
+}
+
+int
+/*ARGSUSED*/
+rl_kill_text(int from __attribute__((__unused__)),
+    int to __attribute__((__unused__)))
+{
+	return 0;
+}
+
+Keymap
+rl_make_bare_keymap(void)
+{
+	return NULL;
+}
+
+Keymap
+rl_get_keymap(void)
+{
+	return NULL;
+}
+
+void
+/*ARGSUSED*/
+rl_set_keymap(Keymap k __attribute__((__unused__)))
+{
+}
+
+int
+/*ARGSUSED*/
+rl_generic_bind(int type __attribute__((__unused__)),
+    const char * keyseq __attribute__((__unused__)),
+    const char * data __attribute__((__unused__)),
+    Keymap k __attribute__((__unused__)))
+{
+	return 0;
+}
+
+int
+/*ARGSUSED*/
+rl_bind_key_in_map(int key __attribute__((__unused__)),
+    rl_command_func_t *fun __attribute__((__unused__)),
+    Keymap k __attribute__((__unused__)))
+{
+	return 0;
+}
+
+/* unsupported, but needed by python */
+void
+rl_cleanup_after_signal(void)
+{
+}
+
+int
+rl_on_new_line(void)
+{
+	return 0;
+}
+
+void
+rl_free_line_state(void)
+{
+}
diff --git a/src/refresh.c b/src/refresh.c
new file mode 100644
index 0000000..3e1176e
--- /dev/null
+++ b/src/refresh.c
@@ -0,0 +1,1183 @@
+/*	$NetBSD: refresh.c,v 1.37 2011/07/29 23:44:45 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)refresh.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: refresh.c,v 1.37 2011/07/29 23:44:45 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * refresh.c: Lower level screen refreshing functions
+ */
+#include <stdio.h>
+#include <ctype.h>
+#include <unistd.h>
+#include <string.h>
+
+#include "el.h"
+
+private void	re_nextline(EditLine *);
+private void	re_addc(EditLine *, Int);
+private void	re_update_line(EditLine *, Char *, Char *, int);
+private void	re_insert (EditLine *, Char *, int, int, Char *, int);
+private void	re_delete(EditLine *, Char *, int, int, int);
+private void	re_fastputc(EditLine *, Int);
+private void	re_clear_eol(EditLine *, int, int, int);
+private void	re__strncopy(Char *, Char *, size_t);
+private void	re__copy_and_pad(Char *, const Char *, size_t);
+
+#ifdef DEBUG_REFRESH
+private void	re_printstr(EditLine *, const char *, char *, char *);
+#define	__F el->el_errfile
+#define	ELRE_ASSERT(a, b, c)	do 				\
+				    if (/*CONSTCOND*/ a) {	\
+					(void) fprintf b;	\
+					c;			\
+				    }				\
+				while (/*CONSTCOND*/0)
+#define	ELRE_DEBUG(a, b)	ELRE_ASSERT(a,b,;)
+
+/* re_printstr():
+ *	Print a string on the debugging pty
+ */
+private void
+re_printstr(EditLine *el, const char *str, char *f, char *t)
+{
+
+	ELRE_DEBUG(1, (__F, "%s:\"", str));
+	while (f < t)
+		ELRE_DEBUG(1, (__F, "%c", *f++ & 0177));
+	ELRE_DEBUG(1, (__F, "\"\r\n"));
+}
+#else
+#define	ELRE_ASSERT(a, b, c)
+#define	ELRE_DEBUG(a, b)
+#endif
+
+/* re_nextline():
+ *	Move to the next line or scroll
+ */
+private void
+re_nextline(EditLine *el)
+{
+	el->el_refresh.r_cursor.h = 0;	/* reset it. */
+
+	/*
+	 * If we would overflow (input is longer than terminal size),
+	 * emulate scroll by dropping first line and shuffling the rest.
+	 * We do this via pointer shuffling - it's safe in this case
+	 * and we avoid memcpy().
+	 */
+	if (el->el_refresh.r_cursor.v + 1 >= el->el_terminal.t_size.v) {
+		int i, lins = el->el_terminal.t_size.v;
+		Char *firstline = el->el_vdisplay[0];
+
+		for(i = 1; i < lins; i++)
+			el->el_vdisplay[i - 1] = el->el_vdisplay[i];
+
+		firstline[0] = '\0';		/* empty the string */	
+		el->el_vdisplay[i - 1] = firstline;
+	} else
+		el->el_refresh.r_cursor.v++;
+
+	ELRE_ASSERT(el->el_refresh.r_cursor.v >= el->el_terminal.t_size.v,
+	    (__F, "\r\nre_putc: overflow! r_cursor.v == %d > %d\r\n",
+	    el->el_refresh.r_cursor.v, el->el_terminal.t_size.v),
+	    abort());
+}
+
+/* re_addc():
+ *	Draw c, expanding tabs, control chars etc.
+ */
+private void
+re_addc(EditLine *el, Int c)
+{
+	switch (ct_chr_class((Char)c)) {
+	case CHTYPE_TAB:        /* expand the tab */
+		for (;;) {
+			re_putc(el, ' ', 1);
+			if ((el->el_refresh.r_cursor.h & 07) == 0)
+				break;			/* go until tab stop */
+		}
+		break;
+	case CHTYPE_NL: {
+		int oldv = el->el_refresh.r_cursor.v;
+		re_putc(el, '\0', 0);			/* assure end of line */
+		if (oldv == el->el_refresh.r_cursor.v)	/* XXX */
+			re_nextline(el);
+		break;
+	}
+	case CHTYPE_PRINT:
+		re_putc(el, c, 1);
+		break;
+	default: {
+		Char visbuf[VISUAL_WIDTH_MAX];
+		ssize_t i, n =
+		    ct_visual_char(visbuf, VISUAL_WIDTH_MAX, (Char)c);
+		for (i = 0; n-- > 0; ++i)
+		    re_putc(el, visbuf[i], 1);
+		break;
+	}
+	}
+}
+
+
+/* re_putc():
+ *	Draw the character given
+ */
+protected void
+re_putc(EditLine *el, Int c, int shift)
+{
+	int i, w = Width(c);
+	ELRE_DEBUG(1, (__F, "printing %5x '%c'\r\n", c, c));
+
+	while (shift && (el->el_refresh.r_cursor.h + w > el->el_terminal.t_size.h))
+	    re_putc(el, ' ', 1);
+
+	el->el_vdisplay[el->el_refresh.r_cursor.v]
+	    [el->el_refresh.r_cursor.h] = c;
+	/* assumes !shift is only used for single-column chars */
+	i = w;
+	while (--i > 0)
+		el->el_vdisplay[el->el_refresh.r_cursor.v]
+		    [el->el_refresh.r_cursor.h + i] = MB_FILL_CHAR;
+
+	if (!shift)
+		return;
+
+	el->el_refresh.r_cursor.h += w;	/* advance to next place */
+	if (el->el_refresh.r_cursor.h >= el->el_terminal.t_size.h) {
+		/* assure end of line */
+		el->el_vdisplay[el->el_refresh.r_cursor.v][el->el_terminal.t_size.h]
+		    = '\0';
+		re_nextline(el);
+	}
+}
+
+
+/* re_refresh():
+ *	draws the new virtual screen image from the current input
+ *  	line, then goes line-by-line changing the real image to the new
+ *	virtual image. The routine to re-draw a line can be replaced
+ *	easily in hopes of a smarter one being placed there.
+ */
+protected void
+re_refresh(EditLine *el)
+{
+	int i, rhdiff;
+	Char *cp, *st;
+	coord_t cur;
+#ifdef notyet
+	size_t termsz;
+#endif
+
+	ELRE_DEBUG(1, (__F, "el->el_line.buffer = :%s:\r\n",
+	    el->el_line.buffer));
+
+	/* reset the Drawing cursor */
+	el->el_refresh.r_cursor.h = 0;
+	el->el_refresh.r_cursor.v = 0;
+
+	/* temporarily draw rprompt to calculate its size */
+	prompt_print(el, EL_RPROMPT);
+
+	/* reset the Drawing cursor */
+	el->el_refresh.r_cursor.h = 0;
+	el->el_refresh.r_cursor.v = 0;
+
+	if (el->el_line.cursor >= el->el_line.lastchar) {
+		if (el->el_map.current == el->el_map.alt
+		    && el->el_line.lastchar != el->el_line.buffer)
+			el->el_line.cursor = el->el_line.lastchar - 1;
+		else
+			el->el_line.cursor = el->el_line.lastchar;
+	}
+
+	cur.h = -1;		/* set flag in case I'm not set */
+	cur.v = 0;
+
+	prompt_print(el, EL_PROMPT);
+
+	/* draw the current input buffer */
+#if notyet
+	termsz = el->el_terminal.t_size.h * el->el_terminal.t_size.v;
+	if (el->el_line.lastchar - el->el_line.buffer > termsz) {
+		/*
+		 * If line is longer than terminal, process only part
+		 * of line which would influence display.
+		 */
+		size_t rem = (el->el_line.lastchar-el->el_line.buffer)%termsz;
+
+		st = el->el_line.lastchar - rem
+			- (termsz - (((rem / el->el_terminal.t_size.v) - 1)
+					* el->el_terminal.t_size.v));
+	} else
+#endif
+		st = el->el_line.buffer;
+
+	for (cp = st; cp < el->el_line.lastchar; cp++) {
+		if (cp == el->el_line.cursor) {
+                        int w = Width(*cp);
+			/* save for later */
+			cur.h = el->el_refresh.r_cursor.h;
+			cur.v = el->el_refresh.r_cursor.v;
+                        /* handle being at a linebroken doublewidth char */
+                        if (w > 1 && el->el_refresh.r_cursor.h + w >
+			    el->el_terminal.t_size.h) {
+				cur.h = 0;
+				cur.v++;
+                        }
+		}
+		re_addc(el, *cp);
+	}
+
+	if (cur.h == -1) {	/* if I haven't been set yet, I'm at the end */
+		cur.h = el->el_refresh.r_cursor.h;
+		cur.v = el->el_refresh.r_cursor.v;
+	}
+	rhdiff = el->el_terminal.t_size.h - el->el_refresh.r_cursor.h -
+	    el->el_rprompt.p_pos.h;
+	if (el->el_rprompt.p_pos.h && !el->el_rprompt.p_pos.v &&
+	    !el->el_refresh.r_cursor.v && rhdiff > 1) {
+		/*
+		 * have a right-hand side prompt that will fit
+		 * on the end of the first line with at least
+		 * one character gap to the input buffer.
+		 */
+		while (--rhdiff > 0)	/* pad out with spaces */
+			re_putc(el, ' ', 1);
+		prompt_print(el, EL_RPROMPT);
+	} else {
+		el->el_rprompt.p_pos.h = 0;	/* flag "not using rprompt" */
+		el->el_rprompt.p_pos.v = 0;
+	}
+
+	re_putc(el, '\0', 0);	/* make line ended with NUL, no cursor shift */
+
+	el->el_refresh.r_newcv = el->el_refresh.r_cursor.v;
+
+	ELRE_DEBUG(1, (__F,
+		"term.h=%d vcur.h=%d vcur.v=%d vdisplay[0]=\r\n:%80.80s:\r\n",
+		el->el_terminal.t_size.h, el->el_refresh.r_cursor.h,
+		el->el_refresh.r_cursor.v, ct_encode_string(el->el_vdisplay[0])));
+
+	ELRE_DEBUG(1, (__F, "updating %d lines.\r\n", el->el_refresh.r_newcv));
+	for (i = 0; i <= el->el_refresh.r_newcv; i++) {
+		/* NOTE THAT re_update_line MAY CHANGE el_display[i] */
+		re_update_line(el, el->el_display[i], el->el_vdisplay[i], i);
+
+		/*
+		 * Copy the new line to be the current one, and pad out with
+		 * spaces to the full width of the terminal so that if we try
+		 * moving the cursor by writing the character that is at the
+		 * end of the screen line, it won't be a NUL or some old
+		 * leftover stuff.
+		 */
+		re__copy_and_pad(el->el_display[i], el->el_vdisplay[i],
+		    (size_t) el->el_terminal.t_size.h);
+	}
+	ELRE_DEBUG(1, (__F,
+	"\r\nel->el_refresh.r_cursor.v=%d,el->el_refresh.r_oldcv=%d i=%d\r\n",
+	    el->el_refresh.r_cursor.v, el->el_refresh.r_oldcv, i));
+
+	if (el->el_refresh.r_oldcv > el->el_refresh.r_newcv)
+		for (; i <= el->el_refresh.r_oldcv; i++) {
+			terminal_move_to_line(el, i);
+			terminal_move_to_char(el, 0);
+                        /* This Strlen should be safe even with MB_FILL_CHARs */
+			terminal_clear_EOL(el, (int) Strlen(el->el_display[i]));
+#ifdef DEBUG_REFRESH
+			terminal_overwrite(el, "C\b", (size_t)2);
+#endif /* DEBUG_REFRESH */
+			el->el_display[i][0] = '\0';
+		}
+
+	el->el_refresh.r_oldcv = el->el_refresh.r_newcv; /* set for next time */
+	ELRE_DEBUG(1, (__F,
+	    "\r\ncursor.h = %d, cursor.v = %d, cur.h = %d, cur.v = %d\r\n",
+	    el->el_refresh.r_cursor.h, el->el_refresh.r_cursor.v,
+	    cur.h, cur.v));
+	terminal_move_to_line(el, cur.v);	/* go to where the cursor is */
+	terminal_move_to_char(el, cur.h);
+}
+
+
+/* re_goto_bottom():
+ *	 used to go to last used screen line
+ */
+protected void
+re_goto_bottom(EditLine *el)
+{
+
+	terminal_move_to_line(el, el->el_refresh.r_oldcv);
+	terminal__putc(el, '\n');
+	re_clear_display(el);
+	terminal__flush(el);
+}
+
+
+/* re_insert():
+ *	insert num characters of s into d (in front of the character)
+ *	at dat, maximum length of d is dlen
+ */
+private void
+/*ARGSUSED*/
+re_insert(EditLine *el __attribute__((__unused__)),
+    Char *d, int dat, int dlen, Char *s, int num)
+{
+	Char *a, *b;
+
+	if (num <= 0)
+		return;
+	if (num > dlen - dat)
+		num = dlen - dat;
+
+	ELRE_DEBUG(1,
+	    (__F, "re_insert() starting: %d at %d max %d, d == \"%s\"\n",
+	    num, dat, dlen, ct_encode_string(d)));
+	ELRE_DEBUG(1, (__F, "s == \"%s\"\n", ct_encode_string(s)));
+
+	/* open up the space for num chars */
+	if (num > 0) {
+		b = d + dlen - 1;
+		a = b - num;
+		while (a >= &d[dat])
+			*b-- = *a--;
+		d[dlen] = '\0';	/* just in case */
+	}
+
+	ELRE_DEBUG(1, (__F,
+		"re_insert() after insert: %d at %d max %d, d == \"%s\"\n",
+		num, dat, dlen, ct_encode_string(d)));
+	ELRE_DEBUG(1, (__F, "s == \"%s\"\n", ct_encode_string(s)));
+
+	/* copy the characters */
+	for (a = d + dat; (a < d + dlen) && (num > 0); num--)
+		*a++ = *s++;
+
+#ifdef notyet
+        /* ct_encode_string() uses a static buffer, so we can't conveniently
+         * encode both d & s here */
+	ELRE_DEBUG(1,
+	    (__F, "re_insert() after copy: %d at %d max %d, %s == \"%s\"\n",
+	    num, dat, dlen, d, s));
+	ELRE_DEBUG(1, (__F, "s == \"%s\"\n", s));
+#endif
+}
+
+
+/* re_delete():
+ *	delete num characters d at dat, maximum length of d is dlen
+ */
+private void
+/*ARGSUSED*/
+re_delete(EditLine *el __attribute__((__unused__)),
+    Char *d, int dat, int dlen, int num)
+{
+	Char *a, *b;
+
+	if (num <= 0)
+		return;
+	if (dat + num >= dlen) {
+		d[dat] = '\0';
+		return;
+	}
+	ELRE_DEBUG(1,
+	    (__F, "re_delete() starting: %d at %d max %d, d == \"%s\"\n",
+	    num, dat, dlen, ct_encode_string(d)));
+
+	/* open up the space for num chars */
+	if (num > 0) {
+		b = d + dat;
+		a = b + num;
+		while (a < &d[dlen])
+			*b++ = *a++;
+		d[dlen] = '\0';	/* just in case */
+	}
+	ELRE_DEBUG(1,
+	    (__F, "re_delete() after delete: %d at %d max %d, d == \"%s\"\n",
+	    num, dat, dlen, ct_encode_string(d)));
+}
+
+
+/* re__strncopy():
+ *	Like strncpy without padding.
+ */
+private void
+re__strncopy(Char *a, Char *b, size_t n)
+{
+
+	while (n-- && *b)
+		*a++ = *b++;
+}
+
+/* re_clear_eol():
+ *	Find the number of characters we need to clear till the end of line
+ *	in order to make sure that we have cleared the previous contents of
+ *	the line. fx and sx is the number of characters inserted or deleted
+ *	in the first or second diff, diff is the difference between the
+ * 	number of characters between the new and old line.
+ */
+private void
+re_clear_eol(EditLine *el, int fx, int sx, int diff)
+{
+
+	ELRE_DEBUG(1, (__F, "re_clear_eol sx %d, fx %d, diff %d\n",
+	    sx, fx, diff));
+
+	if (fx < 0)
+		fx = -fx;
+	if (sx < 0)
+		sx = -sx;
+	if (fx > diff)
+		diff = fx;
+	if (sx > diff)
+		diff = sx;
+
+	ELRE_DEBUG(1, (__F, "re_clear_eol %d\n", diff));
+	terminal_clear_EOL(el, diff);
+}
+
+/*****************************************************************
+    re_update_line() is based on finding the middle difference of each line
+    on the screen; vis:
+
+			     /old first difference
+	/beginning of line   |              /old last same       /old EOL
+	v		     v              v                    v
+old:	eddie> Oh, my little gruntle-buggy is to me, as lurgid as
+new:	eddie> Oh, my little buggy says to me, as lurgid as
+	^		     ^        ^			   ^
+	\beginning of line   |        \new last same	   \new end of line
+			     \new first difference
+
+    all are character pointers for the sake of speed.  Special cases for
+    no differences, as well as for end of line additions must be handled.
+**************************************************************** */
+
+/* Minimum at which doing an insert it "worth it".  This should be about
+ * half the "cost" of going into insert mode, inserting a character, and
+ * going back out.  This should really be calculated from the termcap
+ * data...  For the moment, a good number for ANSI terminals.
+ */
+#define	MIN_END_KEEP	4
+
+private void
+re_update_line(EditLine *el, Char *old, Char *new, int i)
+{
+	Char *o, *n, *p, c;
+	Char *ofd, *ols, *oe, *nfd, *nls, *ne;
+	Char *osb, *ose, *nsb, *nse;
+	int fx, sx;
+	size_t len;
+
+	/*
+         * find first diff
+         */
+	for (o = old, n = new; *o && (*o == *n); o++, n++)
+		continue;
+	ofd = o;
+	nfd = n;
+
+	/*
+         * Find the end of both old and new
+         */
+	while (*o)
+		o++;
+	/*
+         * Remove any trailing blanks off of the end, being careful not to
+         * back up past the beginning.
+         */
+	while (ofd < o) {
+		if (o[-1] != ' ')
+			break;
+		o--;
+	}
+	oe = o;
+	*oe = '\0';
+
+	while (*n)
+		n++;
+
+	/* remove blanks from end of new */
+	while (nfd < n) {
+		if (n[-1] != ' ')
+			break;
+		n--;
+	}
+	ne = n;
+	*ne = '\0';
+
+	/*
+         * if no diff, continue to next line of redraw
+         */
+	if (*ofd == '\0' && *nfd == '\0') {
+		ELRE_DEBUG(1, (__F, "no difference.\r\n"));
+		return;
+	}
+	/*
+         * find last same pointer
+         */
+	while ((o > ofd) && (n > nfd) && (*--o == *--n))
+		continue;
+	ols = ++o;
+	nls = ++n;
+
+	/*
+         * find same begining and same end
+         */
+	osb = ols;
+	nsb = nls;
+	ose = ols;
+	nse = nls;
+
+	/*
+         * case 1: insert: scan from nfd to nls looking for *ofd
+         */
+	if (*ofd) {
+		for (c = *ofd, n = nfd; n < nls; n++) {
+			if (c == *n) {
+				for (o = ofd, p = n;
+				    p < nls && o < ols && *o == *p;
+				    o++, p++)
+					continue;
+				/*
+				 * if the new match is longer and it's worth
+				 * keeping, then we take it
+				 */
+				if (((nse - nsb) < (p - n)) &&
+				    (2 * (p - n) > n - nfd)) {
+					nsb = n;
+					nse = p;
+					osb = ofd;
+					ose = o;
+				}
+			}
+		}
+	}
+	/*
+         * case 2: delete: scan from ofd to ols looking for *nfd
+         */
+	if (*nfd) {
+		for (c = *nfd, o = ofd; o < ols; o++) {
+			if (c == *o) {
+				for (n = nfd, p = o;
+				    p < ols && n < nls && *p == *n;
+				    p++, n++)
+					continue;
+				/*
+				 * if the new match is longer and it's worth
+				 * keeping, then we take it
+				 */
+				if (((ose - osb) < (p - o)) &&
+				    (2 * (p - o) > o - ofd)) {
+					nsb = nfd;
+					nse = n;
+					osb = o;
+					ose = p;
+				}
+			}
+		}
+	}
+	/*
+         * Pragmatics I: If old trailing whitespace or not enough characters to
+         * save to be worth it, then don't save the last same info.
+         */
+	if ((oe - ols) < MIN_END_KEEP) {
+		ols = oe;
+		nls = ne;
+	}
+	/*
+         * Pragmatics II: if the terminal isn't smart enough, make the data
+         * dumber so the smart update doesn't try anything fancy
+         */
+
+	/*
+         * fx is the number of characters we need to insert/delete: in the
+         * beginning to bring the two same begins together
+         */
+	fx = (int)((nsb - nfd) - (osb - ofd));
+	/*
+         * sx is the number of characters we need to insert/delete: in the
+         * end to bring the two same last parts together
+         */
+	sx = (int)((nls - nse) - (ols - ose));
+
+	if (!EL_CAN_INSERT) {
+		if (fx > 0) {
+			osb = ols;
+			ose = ols;
+			nsb = nls;
+			nse = nls;
+		}
+		if (sx > 0) {
+			ols = oe;
+			nls = ne;
+		}
+		if ((ols - ofd) < (nls - nfd)) {
+			ols = oe;
+			nls = ne;
+		}
+	}
+	if (!EL_CAN_DELETE) {
+		if (fx < 0) {
+			osb = ols;
+			ose = ols;
+			nsb = nls;
+			nse = nls;
+		}
+		if (sx < 0) {
+			ols = oe;
+			nls = ne;
+		}
+		if ((ols - ofd) > (nls - nfd)) {
+			ols = oe;
+			nls = ne;
+		}
+	}
+	/*
+         * Pragmatics III: make sure the middle shifted pointers are correct if
+         * they don't point to anything (we may have moved ols or nls).
+         */
+	/* if the change isn't worth it, don't bother */
+	/* was: if (osb == ose) */
+	if ((ose - osb) < MIN_END_KEEP) {
+		osb = ols;
+		ose = ols;
+		nsb = nls;
+		nse = nls;
+	}
+	/*
+         * Now that we are done with pragmatics we recompute fx, sx
+         */
+	fx = (int)((nsb - nfd) - (osb - ofd));
+	sx = (int)((nls - nse) - (ols - ose));
+
+	ELRE_DEBUG(1, (__F, "fx %d, sx %d\n", fx, sx));
+	ELRE_DEBUG(1, (__F, "ofd %d, osb %d, ose %d, ols %d, oe %d\n",
+		ofd - old, osb - old, ose - old, ols - old, oe - old));
+	ELRE_DEBUG(1, (__F, "nfd %d, nsb %d, nse %d, nls %d, ne %d\n",
+		nfd - new, nsb - new, nse - new, nls - new, ne - new));
+	ELRE_DEBUG(1, (__F,
+		"xxx-xxx:\"00000000001111111111222222222233333333334\"\r\n"));
+	ELRE_DEBUG(1, (__F,
+		"xxx-xxx:\"01234567890123456789012345678901234567890\"\r\n"));
+#ifdef DEBUG_REFRESH
+	re_printstr(el, "old- oe", old, oe);
+	re_printstr(el, "new- ne", new, ne);
+	re_printstr(el, "old-ofd", old, ofd);
+	re_printstr(el, "new-nfd", new, nfd);
+	re_printstr(el, "ofd-osb", ofd, osb);
+	re_printstr(el, "nfd-nsb", nfd, nsb);
+	re_printstr(el, "osb-ose", osb, ose);
+	re_printstr(el, "nsb-nse", nsb, nse);
+	re_printstr(el, "ose-ols", ose, ols);
+	re_printstr(el, "nse-nls", nse, nls);
+	re_printstr(el, "ols- oe", ols, oe);
+	re_printstr(el, "nls- ne", nls, ne);
+#endif /* DEBUG_REFRESH */
+
+	/*
+         * el_cursor.v to this line i MUST be in this routine so that if we
+         * don't have to change the line, we don't move to it. el_cursor.h to
+         * first diff char
+         */
+	terminal_move_to_line(el, i);
+
+	/*
+         * at this point we have something like this:
+         *
+         * /old                  /ofd    /osb               /ose    /ols     /oe
+         * v.....................v       v..................v       v........v
+         * eddie> Oh, my fredded gruntle-buggy is to me, as foo var lurgid as
+         * eddie> Oh, my fredded quiux buggy is to me, as gruntle-lurgid as
+         * ^.....................^     ^..................^       ^........^
+         * \new                  \nfd  \nsb               \nse     \nls    \ne
+         *
+         * fx is the difference in length between the chars between nfd and
+         * nsb, and the chars between ofd and osb, and is thus the number of
+         * characters to delete if < 0 (new is shorter than old, as above),
+         * or insert (new is longer than short).
+         *
+         * sx is the same for the second differences.
+         */
+
+	/*
+         * if we have a net insert on the first difference, AND inserting the
+         * net amount ((nsb-nfd) - (osb-ofd)) won't push the last useful
+         * character (which is ne if nls != ne, otherwise is nse) off the edge
+	 * of the screen (el->el_terminal.t_size.h) else we do the deletes first
+	 * so that we keep everything we need to.
+         */
+
+	/*
+         * if the last same is the same like the end, there is no last same
+         * part, otherwise we want to keep the last same part set p to the
+         * last useful old character
+         */
+	p = (ols != oe) ? oe : ose;
+
+	/*
+         * if (There is a diffence in the beginning) && (we need to insert
+         *   characters) && (the number of characters to insert is less than
+         *   the term width)
+	 *	We need to do an insert!
+	 * else if (we need to delete characters)
+	 *	We need to delete characters!
+	 * else
+	 *	No insert or delete
+         */
+	if ((nsb != nfd) && fx > 0 &&
+	    ((p - old) + fx <= el->el_terminal.t_size.h)) {
+		ELRE_DEBUG(1,
+		    (__F, "first diff insert at %d...\r\n", nfd - new));
+		/*
+		 * Move to the first char to insert, where the first diff is.
+		 */
+		terminal_move_to_char(el, (int)(nfd - new));
+		/*
+		 * Check if we have stuff to keep at end
+		 */
+		if (nsb != ne) {
+			ELRE_DEBUG(1, (__F, "with stuff to keep at end\r\n"));
+			/*
+		         * insert fx chars of new starting at nfd
+		         */
+			if (fx > 0) {
+				ELRE_DEBUG(!EL_CAN_INSERT, (__F,
+				"ERROR: cannot insert in early first diff\n"));
+				terminal_insertwrite(el, nfd, fx);
+				re_insert(el, old, (int)(ofd - old),
+				    el->el_terminal.t_size.h, nfd, fx);
+			}
+			/*
+		         * write (nsb-nfd) - fx chars of new starting at
+		         * (nfd + fx)
+			 */
+			len = (size_t) ((nsb - nfd) - fx);
+			terminal_overwrite(el, (nfd + fx), len);
+			re__strncopy(ofd + fx, nfd + fx, len);
+		} else {
+			ELRE_DEBUG(1, (__F, "without anything to save\r\n"));
+			len = (size_t)(nsb - nfd);
+			terminal_overwrite(el, nfd, len);
+			re__strncopy(ofd, nfd, len);
+			/*
+		         * Done
+		         */
+			return;
+		}
+	} else if (fx < 0) {
+		ELRE_DEBUG(1,
+		    (__F, "first diff delete at %d...\r\n", ofd - old));
+		/*
+		 * move to the first char to delete where the first diff is
+		 */
+		terminal_move_to_char(el, (int)(ofd - old));
+		/*
+		 * Check if we have stuff to save
+		 */
+		if (osb != oe) {
+			ELRE_DEBUG(1, (__F, "with stuff to save at end\r\n"));
+			/*
+		         * fx is less than zero *always* here but we check
+		         * for code symmetry
+		         */
+			if (fx < 0) {
+				ELRE_DEBUG(!EL_CAN_DELETE, (__F,
+				    "ERROR: cannot delete in first diff\n"));
+				terminal_deletechars(el, -fx);
+				re_delete(el, old, (int)(ofd - old),
+				    el->el_terminal.t_size.h, -fx);
+			}
+			/*
+		         * write (nsb-nfd) chars of new starting at nfd
+		         */
+			len = (size_t) (nsb - nfd);
+			terminal_overwrite(el, nfd, len);
+			re__strncopy(ofd, nfd, len);
+
+		} else {
+			ELRE_DEBUG(1, (__F,
+			    "but with nothing left to save\r\n"));
+			/*
+		         * write (nsb-nfd) chars of new starting at nfd
+		         */
+			terminal_overwrite(el, nfd, (size_t)(nsb - nfd));
+			re_clear_eol(el, fx, sx,
+			    (int)((oe - old) - (ne - new)));
+			/*
+		         * Done
+		         */
+			return;
+		}
+	} else
+		fx = 0;
+
+	if (sx < 0 && (ose - old) + fx < el->el_terminal.t_size.h) {
+		ELRE_DEBUG(1, (__F,
+		    "second diff delete at %d...\r\n", (ose - old) + fx));
+		/*
+		 * Check if we have stuff to delete
+		 */
+		/*
+		 * fx is the number of characters inserted (+) or deleted (-)
+		 */
+
+		terminal_move_to_char(el, (int)((ose - old) + fx));
+		/*
+		 * Check if we have stuff to save
+		 */
+		if (ols != oe) {
+			ELRE_DEBUG(1, (__F, "with stuff to save at end\r\n"));
+			/*
+		         * Again a duplicate test.
+		         */
+			if (sx < 0) {
+				ELRE_DEBUG(!EL_CAN_DELETE, (__F,
+				    "ERROR: cannot delete in second diff\n"));
+				terminal_deletechars(el, -sx);
+			}
+			/*
+		         * write (nls-nse) chars of new starting at nse
+		         */
+			terminal_overwrite(el, nse, (size_t)(nls - nse));
+		} else {
+			ELRE_DEBUG(1, (__F,
+			    "but with nothing left to save\r\n"));
+			terminal_overwrite(el, nse, (size_t)(nls - nse));
+			re_clear_eol(el, fx, sx,
+			    (int)((oe - old) - (ne - new)));
+		}
+	}
+	/*
+         * if we have a first insert AND WE HAVEN'T ALREADY DONE IT...
+         */
+	if ((nsb != nfd) && (osb - ofd) <= (nsb - nfd) && (fx == 0)) {
+		ELRE_DEBUG(1, (__F, "late first diff insert at %d...\r\n",
+		    nfd - new));
+
+		terminal_move_to_char(el, (int)(nfd - new));
+		/*
+		 * Check if we have stuff to keep at the end
+		 */
+		if (nsb != ne) {
+			ELRE_DEBUG(1, (__F, "with stuff to keep at end\r\n"));
+			/*
+		         * We have to recalculate fx here because we set it
+		         * to zero above as a flag saying that we hadn't done
+		         * an early first insert.
+		         */
+			fx = (int)((nsb - nfd) - (osb - ofd));
+			if (fx > 0) {
+				/*
+				 * insert fx chars of new starting at nfd
+				 */
+				ELRE_DEBUG(!EL_CAN_INSERT, (__F,
+				 "ERROR: cannot insert in late first diff\n"));
+				terminal_insertwrite(el, nfd, fx);
+				re_insert(el, old, (int)(ofd - old),
+				    el->el_terminal.t_size.h, nfd, fx);
+			}
+			/*
+		         * write (nsb-nfd) - fx chars of new starting at
+		         * (nfd + fx)
+			 */
+			len = (size_t) ((nsb - nfd) - fx);
+			terminal_overwrite(el, (nfd + fx), len);
+			re__strncopy(ofd + fx, nfd + fx, len);
+		} else {
+			ELRE_DEBUG(1, (__F, "without anything to save\r\n"));
+			len = (size_t) (nsb - nfd);
+			terminal_overwrite(el, nfd, len);
+			re__strncopy(ofd, nfd, len);
+		}
+	}
+	/*
+         * line is now NEW up to nse
+         */
+	if (sx >= 0) {
+		ELRE_DEBUG(1, (__F,
+		    "second diff insert at %d...\r\n", (int)(nse - new)));
+		terminal_move_to_char(el, (int)(nse - new));
+		if (ols != oe) {
+			ELRE_DEBUG(1, (__F, "with stuff to keep at end\r\n"));
+			if (sx > 0) {
+				/* insert sx chars of new starting at nse */
+				ELRE_DEBUG(!EL_CAN_INSERT, (__F,
+				    "ERROR: cannot insert in second diff\n"));
+				terminal_insertwrite(el, nse, sx);
+			}
+			/*
+		         * write (nls-nse) - sx chars of new starting at
+			 * (nse + sx)
+		         */
+			terminal_overwrite(el, (nse + sx),
+			    (size_t)((nls - nse) - sx));
+		} else {
+			ELRE_DEBUG(1, (__F, "without anything to save\r\n"));
+			terminal_overwrite(el, nse, (size_t)(nls - nse));
+
+			/*
+	                 * No need to do a clear-to-end here because we were
+	                 * doing a second insert, so we will have over
+	                 * written all of the old string.
+		         */
+		}
+	}
+	ELRE_DEBUG(1, (__F, "done.\r\n"));
+}
+
+
+/* re__copy_and_pad():
+ *	Copy string and pad with spaces
+ */
+private void
+re__copy_and_pad(Char *dst, const Char *src, size_t width)
+{
+	size_t i;
+
+	for (i = 0; i < width; i++) {
+		if (*src == '\0')
+			break;
+		*dst++ = *src++;
+	}
+
+	for (; i < width; i++)
+		*dst++ = ' ';
+
+	*dst = '\0';
+}
+
+
+/* re_refresh_cursor():
+ *	Move to the new cursor position
+ */
+protected void
+re_refresh_cursor(EditLine *el)
+{
+	Char *cp;
+	int h, v, th, w;
+
+	if (el->el_line.cursor >= el->el_line.lastchar) {
+		if (el->el_map.current == el->el_map.alt
+		    && el->el_line.lastchar != el->el_line.buffer)
+			el->el_line.cursor = el->el_line.lastchar - 1;
+		else
+			el->el_line.cursor = el->el_line.lastchar;
+	}
+
+	/* first we must find where the cursor is... */
+	h = el->el_prompt.p_pos.h;
+	v = el->el_prompt.p_pos.v;
+	th = el->el_terminal.t_size.h;	/* optimize for speed */
+
+	/* do input buffer to el->el_line.cursor */
+	for (cp = el->el_line.buffer; cp < el->el_line.cursor; cp++) {
+                switch (ct_chr_class(*cp)) {
+		case CHTYPE_NL:  /* handle newline in data part too */
+			h = 0;
+			v++;
+			break;
+		case CHTYPE_TAB: /* if a tab, to next tab stop */
+			while (++h & 07)
+				continue;
+			break;
+		default:
+			w = Width(*cp);
+			if (w > 1 && h + w > th) { /* won't fit on line */
+				h = 0;
+				v++;
+			}
+			h += ct_visual_width(*cp);
+			break;
+                }
+
+		if (h >= th) {	/* check, extra long tabs picked up here also */
+			h -= th;
+			v++;
+		}
+	}
+        /* if we have a next character, and it's a doublewidth one, we need to
+         * check whether we need to linebreak for it to fit */
+        if (cp < el->el_line.lastchar && (w = Width(*cp)) > 1)
+                if (h + w > th) {
+                    h = 0;
+                    v++;
+                }
+
+	/* now go there */
+	terminal_move_to_line(el, v);
+	terminal_move_to_char(el, h);
+	terminal__flush(el);
+}
+
+
+/* re_fastputc():
+ *	Add a character fast.
+ */
+private void
+re_fastputc(EditLine *el, Int c)
+{
+	int w = Width((Char)c);
+	while (w > 1 && el->el_cursor.h + w > el->el_terminal.t_size.h)
+	    re_fastputc(el, ' ');
+
+	terminal__putc(el, c);
+	el->el_display[el->el_cursor.v][el->el_cursor.h++] = c;
+	while (--w > 0)
+		el->el_display[el->el_cursor.v][el->el_cursor.h++]
+			= MB_FILL_CHAR;
+
+	if (el->el_cursor.h >= el->el_terminal.t_size.h) {
+		/* if we must overflow */
+		el->el_cursor.h = 0;
+
+		/*
+		 * If we would overflow (input is longer than terminal size),
+		 * emulate scroll by dropping first line and shuffling the rest.
+		 * We do this via pointer shuffling - it's safe in this case
+		 * and we avoid memcpy().
+		 */
+		if (el->el_cursor.v + 1 >= el->el_terminal.t_size.v) {
+			int i, lins = el->el_terminal.t_size.v;
+			Char *firstline = el->el_display[0];
+	
+			for(i = 1; i < lins; i++)
+				el->el_display[i - 1] = el->el_display[i];
+
+			re__copy_and_pad(firstline, STR(""), (size_t)0);
+			el->el_display[i - 1] = firstline;
+		} else {
+			el->el_cursor.v++;
+			el->el_refresh.r_oldcv++;
+		}
+		if (EL_HAS_AUTO_MARGINS) {
+			if (EL_HAS_MAGIC_MARGINS) {
+				terminal__putc(el, ' ');
+				terminal__putc(el, '\b');
+			}
+		} else {
+			terminal__putc(el, '\r');
+			terminal__putc(el, '\n');
+		}
+	}
+}
+
+
+/* re_fastaddc():
+ *	we added just one char, handle it fast.
+ *	Assumes that screen cursor == real cursor
+ */
+protected void
+re_fastaddc(EditLine *el)
+{
+	Char c;
+	int rhdiff;
+
+	c = el->el_line.cursor[-1];
+
+	if (c == '\t' || el->el_line.cursor != el->el_line.lastchar) {
+		re_refresh(el);	/* too hard to handle */
+		return;
+	}
+	rhdiff = el->el_terminal.t_size.h - el->el_cursor.h -
+	    el->el_rprompt.p_pos.h;
+	if (el->el_rprompt.p_pos.h && rhdiff < 3) {
+		re_refresh(el);	/* clear out rprompt if less than 1 char gap */
+		return;
+	}			/* else (only do at end of line, no TAB) */
+	switch (ct_chr_class(c)) {
+	case CHTYPE_TAB: /* already handled, should never happen here */
+		break;
+	case CHTYPE_NL:
+	case CHTYPE_PRINT:
+		re_fastputc(el, c);
+		break;
+	case CHTYPE_ASCIICTL:
+	case CHTYPE_NONPRINT: {
+		Char visbuf[VISUAL_WIDTH_MAX];
+		ssize_t i, n =
+		    ct_visual_char(visbuf, VISUAL_WIDTH_MAX, (Char)c);
+		for (i = 0; n-- > 0; ++i)
+			re_fastputc(el, visbuf[i]);
+		break;
+	}
+	}
+	terminal__flush(el);
+}
+
+
+/* re_clear_display():
+ *	clear the screen buffers so that new new prompt starts fresh.
+ */
+protected void
+re_clear_display(EditLine *el)
+{
+	int i;
+
+	el->el_cursor.v = 0;
+	el->el_cursor.h = 0;
+	for (i = 0; i < el->el_terminal.t_size.v; i++)
+		el->el_display[i][0] = '\0';
+	el->el_refresh.r_oldcv = 0;
+}
+
+
+/* re_clear_lines():
+ *	Make sure all lines are *really* blank
+ */
+protected void
+re_clear_lines(EditLine *el)
+{
+
+	if (EL_CAN_CEOL) {
+		int i;
+		for (i = el->el_refresh.r_oldcv; i >= 0; i--) {
+			/* for each line on the screen */
+			terminal_move_to_line(el, i);
+			terminal_move_to_char(el, 0);
+			terminal_clear_EOL(el, el->el_terminal.t_size.h);
+		}
+	} else {
+		terminal_move_to_line(el, el->el_refresh.r_oldcv);
+					/* go to last line */
+		terminal__putc(el, '\r');	/* go to BOL */
+		terminal__putc(el, '\n');	/* go to new line */
+	}
+}
diff --git a/src/refresh.h b/src/refresh.h
new file mode 100644
index 0000000..f80be46
--- /dev/null
+++ b/src/refresh.h
@@ -0,0 +1,59 @@
+/*	$NetBSD: refresh.h,v 1.6 2009/12/30 22:37:40 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)refresh.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.refresh.h: Screen refresh functions
+ */
+#ifndef _h_el_refresh
+#define	_h_el_refresh
+
+#include "histedit.h"
+
+typedef struct {
+	coord_t	r_cursor;	/* Refresh cursor position	*/
+	int	r_oldcv;	/* Vertical locations		*/
+	int	r_newcv;
+} el_refresh_t;
+
+protected void	re_putc(EditLine *, Int, int);
+protected void	re_clear_lines(EditLine *);
+protected void	re_clear_display(EditLine *);
+protected void	re_refresh(EditLine *);
+protected void	re_refresh_cursor(EditLine *);
+protected void	re_fastaddc(EditLine *);
+protected void	re_goto_bottom(EditLine *);
+
+#endif /* _h_el_refresh */
diff --git a/src/search.c b/src/search.c
new file mode 100644
index 0000000..9ed7760
--- /dev/null
+++ b/src/search.c
@@ -0,0 +1,642 @@
+/*	$NetBSD: search.c,v 1.30 2011/10/04 15:27:04 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)search.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: search.c,v 1.30 2011/10/04 15:27:04 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * search.c: History and character search functions
+ */
+#include <stdlib.h>
+#include <sys/types.h>
+#if defined(REGEX)
+#include <regex.h>
+#elif defined(REGEXP)
+#include <regexp.h>
+#endif
+#include "el.h"
+
+/*
+ * Adjust cursor in vi mode to include the character under it
+ */
+#define	EL_CURSOR(el) \
+    ((el)->el_line.cursor + (((el)->el_map.type == MAP_VI) && \
+			    ((el)->el_map.current == (el)->el_map.alt)))
+
+/* search_init():
+ *	Initialize the search stuff
+ */
+protected int
+search_init(EditLine *el)
+{
+
+	el->el_search.patbuf = el_malloc(EL_BUFSIZ *
+	    sizeof(*el->el_search.patbuf));
+	if (el->el_search.patbuf == NULL)
+		return -1;
+	el->el_search.patlen = 0;
+	el->el_search.patdir = -1;
+	el->el_search.chacha = '\0';
+	el->el_search.chadir = CHAR_FWD;
+	el->el_search.chatflg = 0;
+	return 0;
+}
+
+
+/* search_end():
+ *	Initialize the search stuff
+ */
+protected void
+search_end(EditLine *el)
+{
+
+	el_free(el->el_search.patbuf);
+	el->el_search.patbuf = NULL;
+}
+
+
+#ifdef REGEXP
+/* regerror():
+ *	Handle regular expression errors
+ */
+public void
+/*ARGSUSED*/
+regerror(const char *msg)
+{
+}
+#endif
+
+
+/* el_match():
+ *	Return if string matches pattern
+ */
+protected int
+el_match(const Char *str, const Char *pat)
+{
+#ifdef WIDECHAR
+	static ct_buffer_t conv;
+#endif
+#if defined (REGEX)
+	regex_t re;
+	int rv;
+#elif defined (REGEXP)
+	regexp *rp;
+	int rv;
+#else
+	extern char	*re_comp(const char *);
+	extern int	 re_exec(const char *);
+#endif
+
+	if (Strstr(str, pat) != 0)
+		return 1;
+
+#if defined(REGEX)
+	if (regcomp(&re, ct_encode_string(pat, &conv), 0) == 0) {
+		rv = regexec(&re, ct_encode_string(str, &conv), (size_t)0, NULL,
+		    0) == 0;
+		regfree(&re);
+	} else {
+		rv = 0;
+	}
+	return rv;
+#elif defined(REGEXP)
+	if ((re = regcomp(ct_encode_string(pat, &conv))) != NULL) {
+		rv = regexec(re, ct_encode_string(str, &conv));
+		el_free(re);
+	} else {
+		rv = 0;
+	}
+	return rv;
+#else
+	if (re_comp(ct_encode_string(pat, &conv)) != NULL)
+		return 0;
+	else
+		return re_exec(ct_encode_string(str, &conv) == 1);
+#endif
+}
+
+
+/* c_hmatch():
+ *	 return True if the pattern matches the prefix
+ */
+protected int
+c_hmatch(EditLine *el, const Char *str)
+{
+#ifdef SDEBUG
+	(void) fprintf(el->el_errfile, "match `%s' with `%s'\n",
+	    el->el_search.patbuf, str);
+#endif /* SDEBUG */
+
+	return el_match(str, el->el_search.patbuf);
+}
+
+
+/* c_setpat():
+ *	Set the history seatch pattern
+ */
+protected void
+c_setpat(EditLine *el)
+{
+	if (el->el_state.lastcmd != ED_SEARCH_PREV_HISTORY &&
+	    el->el_state.lastcmd != ED_SEARCH_NEXT_HISTORY) {
+		el->el_search.patlen =
+		    (size_t)(EL_CURSOR(el) - el->el_line.buffer);
+		if (el->el_search.patlen >= EL_BUFSIZ)
+			el->el_search.patlen = EL_BUFSIZ - 1;
+		if (el->el_search.patlen != 0) {
+			(void) Strncpy(el->el_search.patbuf, el->el_line.buffer,
+			    el->el_search.patlen);
+			el->el_search.patbuf[el->el_search.patlen] = '\0';
+		} else
+			el->el_search.patlen = Strlen(el->el_search.patbuf);
+	}
+#ifdef SDEBUG
+	(void) fprintf(el->el_errfile, "\neventno = %d\n",
+	    el->el_history.eventno);
+	(void) fprintf(el->el_errfile, "patlen = %d\n", el->el_search.patlen);
+	(void) fprintf(el->el_errfile, "patbuf = \"%s\"\n",
+	    el->el_search.patbuf);
+	(void) fprintf(el->el_errfile, "cursor %d lastchar %d\n",
+	    EL_CURSOR(el) - el->el_line.buffer,
+	    el->el_line.lastchar - el->el_line.buffer);
+#endif
+}
+
+
+/* ce_inc_search():
+ *	Emacs incremental search
+ */
+protected el_action_t
+ce_inc_search(EditLine *el, int dir)
+{
+	static const Char STRfwd[] = {'f', 'w', 'd', '\0'},
+	     STRbck[] = {'b', 'c', 'k', '\0'};
+	static Char pchar = ':';/* ':' = normal, '?' = failed */
+	static Char endcmd[2] = {'\0', '\0'};
+	Char ch, *ocursor = el->el_line.cursor, oldpchar = pchar;
+	const Char *cp;
+
+	el_action_t ret = CC_NORM;
+
+	int ohisteventno = el->el_history.eventno;
+	size_t oldpatlen = el->el_search.patlen;
+	int newdir = dir;
+	int done, redo;
+
+	if (el->el_line.lastchar + sizeof(STRfwd) /
+	    sizeof(*el->el_line.lastchar) + 2 +
+	    el->el_search.patlen >= el->el_line.limit)
+		return CC_ERROR;
+
+	for (;;) {
+
+		if (el->el_search.patlen == 0) {	/* first round */
+			pchar = ':';
+#ifdef ANCHOR
+#define	LEN	2
+			el->el_search.patbuf[el->el_search.patlen++] = '.';
+			el->el_search.patbuf[el->el_search.patlen++] = '*';
+#else
+#define	LEN	0
+#endif
+		}
+		done = redo = 0;
+		*el->el_line.lastchar++ = '\n';
+		for (cp = (newdir == ED_SEARCH_PREV_HISTORY) ? STRbck : STRfwd;
+		    *cp; *el->el_line.lastchar++ = *cp++)
+			continue;
+		*el->el_line.lastchar++ = pchar;
+		for (cp = &el->el_search.patbuf[LEN];
+		    cp < &el->el_search.patbuf[el->el_search.patlen];
+		    *el->el_line.lastchar++ = *cp++)
+			continue;
+		*el->el_line.lastchar = '\0';
+		re_refresh(el);
+
+		if (FUN(el,getc)(el, &ch) != 1)
+			return ed_end_of_file(el, 0);
+
+		switch (el->el_map.current[(unsigned char) ch]) {
+		case ED_INSERT:
+		case ED_DIGIT:
+			if (el->el_search.patlen >= EL_BUFSIZ - LEN)
+				terminal_beep(el);
+			else {
+				el->el_search.patbuf[el->el_search.patlen++] =
+				    ch;
+				*el->el_line.lastchar++ = ch;
+				*el->el_line.lastchar = '\0';
+				re_refresh(el);
+			}
+			break;
+
+		case EM_INC_SEARCH_NEXT:
+			newdir = ED_SEARCH_NEXT_HISTORY;
+			redo++;
+			break;
+
+		case EM_INC_SEARCH_PREV:
+			newdir = ED_SEARCH_PREV_HISTORY;
+			redo++;
+			break;
+
+		case EM_DELETE_PREV_CHAR:
+		case ED_DELETE_PREV_CHAR:
+			if (el->el_search.patlen > LEN)
+				done++;
+			else
+				terminal_beep(el);
+			break;
+
+		default:
+			switch (ch) {
+			case 0007:	/* ^G: Abort */
+				ret = CC_ERROR;
+				done++;
+				break;
+
+			case 0027:	/* ^W: Append word */
+			/* No can do if globbing characters in pattern */
+				for (cp = &el->el_search.patbuf[LEN];; cp++)
+				    if (cp >= &el->el_search.patbuf[
+					el->el_search.patlen]) {
+					el->el_line.cursor +=
+					    el->el_search.patlen - LEN - 1;
+					cp = c__next_word(el->el_line.cursor,
+					    el->el_line.lastchar, 1,
+					    ce__isword);
+					while (el->el_line.cursor < cp &&
+					    *el->el_line.cursor != '\n') {
+						if (el->el_search.patlen >=
+						    EL_BUFSIZ - LEN) {
+							terminal_beep(el);
+							break;
+						}
+						el->el_search.patbuf[el->el_search.patlen++] =
+						    *el->el_line.cursor;
+						*el->el_line.lastchar++ =
+						    *el->el_line.cursor++;
+					}
+					el->el_line.cursor = ocursor;
+					*el->el_line.lastchar = '\0';
+					re_refresh(el);
+					break;
+				    } else if (isglob(*cp)) {
+					    terminal_beep(el);
+					    break;
+				    }
+				break;
+
+			default:	/* Terminate and execute cmd */
+				endcmd[0] = ch;
+				FUN(el,push)(el, endcmd);
+				/* FALLTHROUGH */
+
+			case 0033:	/* ESC: Terminate */
+				ret = CC_REFRESH;
+				done++;
+				break;
+			}
+			break;
+		}
+
+		while (el->el_line.lastchar > el->el_line.buffer &&
+		    *el->el_line.lastchar != '\n')
+			*el->el_line.lastchar-- = '\0';
+		*el->el_line.lastchar = '\0';
+
+		if (!done) {
+
+			/* Can't search if unmatched '[' */
+			for (cp = &el->el_search.patbuf[el->el_search.patlen-1],
+			    ch = ']';
+			    cp >= &el->el_search.patbuf[LEN];
+			    cp--)
+				if (*cp == '[' || *cp == ']') {
+					ch = *cp;
+					break;
+				}
+			if (el->el_search.patlen > LEN && ch != '[') {
+				if (redo && newdir == dir) {
+					if (pchar == '?') { /* wrap around */
+						el->el_history.eventno =
+						    newdir == ED_SEARCH_PREV_HISTORY ? 0 : 0x7fffffff;
+						if (hist_get(el) == CC_ERROR)
+							/* el->el_history.event
+							 * no was fixed by
+							 * first call */
+							(void) hist_get(el);
+						el->el_line.cursor = newdir ==
+						    ED_SEARCH_PREV_HISTORY ?
+						    el->el_line.lastchar :
+						    el->el_line.buffer;
+					} else
+						el->el_line.cursor +=
+						    newdir ==
+						    ED_SEARCH_PREV_HISTORY ?
+						    -1 : 1;
+				}
+#ifdef ANCHOR
+				el->el_search.patbuf[el->el_search.patlen++] =
+				    '.';
+				el->el_search.patbuf[el->el_search.patlen++] =
+				    '*';
+#endif
+				el->el_search.patbuf[el->el_search.patlen] =
+				    '\0';
+				if (el->el_line.cursor < el->el_line.buffer ||
+				    el->el_line.cursor > el->el_line.lastchar ||
+				    (ret = ce_search_line(el, newdir))
+				    == CC_ERROR) {
+					/* avoid c_setpat */
+					el->el_state.lastcmd =
+					    (el_action_t) newdir;
+					ret = (el_action_t)
+					    (newdir == ED_SEARCH_PREV_HISTORY ?
+					    ed_search_prev_history(el, 0) :
+					    ed_search_next_history(el, 0));
+					if (ret != CC_ERROR) {
+						el->el_line.cursor = newdir ==
+						    ED_SEARCH_PREV_HISTORY ?
+						    el->el_line.lastchar :
+						    el->el_line.buffer;
+						(void) ce_search_line(el,
+						    newdir);
+					}
+				}
+				el->el_search.patlen -= LEN;
+				el->el_search.patbuf[el->el_search.patlen] =
+				    '\0';
+				if (ret == CC_ERROR) {
+					terminal_beep(el);
+					if (el->el_history.eventno !=
+					    ohisteventno) {
+						el->el_history.eventno =
+						    ohisteventno;
+						if (hist_get(el) == CC_ERROR)
+							return CC_ERROR;
+					}
+					el->el_line.cursor = ocursor;
+					pchar = '?';
+				} else {
+					pchar = ':';
+				}
+			}
+			ret = ce_inc_search(el, newdir);
+
+			if (ret == CC_ERROR && pchar == '?' && oldpchar == ':')
+				/*
+				 * break abort of failed search at last
+				 * non-failed
+				 */
+				ret = CC_NORM;
+
+		}
+		if (ret == CC_NORM || (ret == CC_ERROR && oldpatlen == 0)) {
+			/* restore on normal return or error exit */
+			pchar = oldpchar;
+			el->el_search.patlen = oldpatlen;
+			if (el->el_history.eventno != ohisteventno) {
+				el->el_history.eventno = ohisteventno;
+				if (hist_get(el) == CC_ERROR)
+					return CC_ERROR;
+			}
+			el->el_line.cursor = ocursor;
+			if (ret == CC_ERROR)
+				re_refresh(el);
+		}
+		if (done || ret != CC_NORM)
+			return ret;
+	}
+}
+
+
+/* cv_search():
+ *	Vi search.
+ */
+protected el_action_t
+cv_search(EditLine *el, int dir)
+{
+	Char ch;
+	Char tmpbuf[EL_BUFSIZ];
+	ssize_t tmplen;
+
+#ifdef ANCHOR
+	tmpbuf[0] = '.';
+	tmpbuf[1] = '*';
+#endif
+	tmplen = LEN;
+
+	el->el_search.patdir = dir;
+
+	tmplen = c_gets(el, &tmpbuf[LEN],
+		dir == ED_SEARCH_PREV_HISTORY ? STR("\n/") : STR("\n?") );
+	if (tmplen == -1)
+		return CC_REFRESH;
+
+	tmplen += LEN;
+	ch = tmpbuf[tmplen];
+	tmpbuf[tmplen] = '\0';
+
+	if (tmplen == LEN) {
+		/*
+		 * Use the old pattern, but wild-card it.
+		 */
+		if (el->el_search.patlen == 0) {
+			re_refresh(el);
+			return CC_ERROR;
+		}
+#ifdef ANCHOR
+		if (el->el_search.patbuf[0] != '.' &&
+		    el->el_search.patbuf[0] != '*') {
+			(void) Strncpy(tmpbuf, el->el_search.patbuf,
+			    sizeof(tmpbuf) / sizeof(*tmpbuf) - 1);
+			el->el_search.patbuf[0] = '.';
+			el->el_search.patbuf[1] = '*';
+			(void) Strncpy(&el->el_search.patbuf[2], tmpbuf,
+			    EL_BUFSIZ - 3);
+			el->el_search.patlen++;
+			el->el_search.patbuf[el->el_search.patlen++] = '.';
+			el->el_search.patbuf[el->el_search.patlen++] = '*';
+			el->el_search.patbuf[el->el_search.patlen] = '\0';
+		}
+#endif
+	} else {
+#ifdef ANCHOR
+		tmpbuf[tmplen++] = '.';
+		tmpbuf[tmplen++] = '*';
+#endif
+		tmpbuf[tmplen] = '\0';
+		(void) Strncpy(el->el_search.patbuf, tmpbuf, EL_BUFSIZ - 1);
+		el->el_search.patlen = (size_t)tmplen;
+	}
+	el->el_state.lastcmd = (el_action_t) dir;	/* avoid c_setpat */
+	el->el_line.cursor = el->el_line.lastchar = el->el_line.buffer;
+	if ((dir == ED_SEARCH_PREV_HISTORY ? ed_search_prev_history(el, 0) :
+	    ed_search_next_history(el, 0)) == CC_ERROR) {
+		re_refresh(el);
+		return CC_ERROR;
+	}
+	if (ch == 0033) {
+		re_refresh(el);
+		return ed_newline(el, 0);
+	}
+	return CC_REFRESH;
+}
+
+
+/* ce_search_line():
+ *	Look for a pattern inside a line
+ */
+protected el_action_t
+ce_search_line(EditLine *el, int dir)
+{
+	Char *cp = el->el_line.cursor;
+	Char *pattern = el->el_search.patbuf;
+	Char oc, *ocp;
+#ifdef ANCHOR
+	ocp = &pattern[1];
+	oc = *ocp;
+	*ocp = '^';
+#else
+	ocp = pattern;
+	oc = *ocp;
+#endif
+
+	if (dir == ED_SEARCH_PREV_HISTORY) {
+		for (; cp >= el->el_line.buffer; cp--) {
+			if (el_match(cp, ocp)) {
+				*ocp = oc;
+				el->el_line.cursor = cp;
+				return CC_NORM;
+			}
+		}
+		*ocp = oc;
+		return CC_ERROR;
+	} else {
+		for (; *cp != '\0' && cp < el->el_line.limit; cp++) {
+			if (el_match(cp, ocp)) {
+				*ocp = oc;
+				el->el_line.cursor = cp;
+				return CC_NORM;
+			}
+		}
+		*ocp = oc;
+		return CC_ERROR;
+	}
+}
+
+
+/* cv_repeat_srch():
+ *	Vi repeat search
+ */
+protected el_action_t
+cv_repeat_srch(EditLine *el, Int c)
+{
+
+#ifdef SDEBUG
+	(void) fprintf(el->el_errfile, "dir %d patlen %d patbuf %s\n",
+	    c, el->el_search.patlen, ct_encode_string(el->el_search.patbuf));
+#endif
+
+	el->el_state.lastcmd = (el_action_t) c;	/* Hack to stop c_setpat */
+	el->el_line.lastchar = el->el_line.buffer;
+
+	switch (c) {
+	case ED_SEARCH_NEXT_HISTORY:
+		return ed_search_next_history(el, 0);
+	case ED_SEARCH_PREV_HISTORY:
+		return ed_search_prev_history(el, 0);
+	default:
+		return CC_ERROR;
+	}
+}
+
+
+/* cv_csearch():
+ *	Vi character search
+ */
+protected el_action_t
+cv_csearch(EditLine *el, int direction, Int ch, int count, int tflag)
+{
+	Char *cp;
+
+	if (ch == 0)
+		return CC_ERROR;
+
+	if (ch == (Int)-1) {
+		Char c;
+		if (FUN(el,getc)(el, &c) != 1)
+			return ed_end_of_file(el, 0);
+		ch = c;
+	}
+
+	/* Save for ';' and ',' commands */
+	el->el_search.chacha = ch;
+	el->el_search.chadir = direction;
+	el->el_search.chatflg = (char)tflag;
+
+	cp = el->el_line.cursor;
+	while (count--) {
+		if ((Int)*cp == ch)
+			cp += direction;
+		for (;;cp += direction) {
+			if (cp >= el->el_line.lastchar)
+				return CC_ERROR;
+			if (cp < el->el_line.buffer)
+				return CC_ERROR;
+			if ((Int)*cp == ch)
+				break;
+		}
+	}
+
+	if (tflag)
+		cp -= direction;
+
+	el->el_line.cursor = cp;
+
+	if (el->el_chared.c_vcmd.action != NOP) {
+		if (direction > 0)
+			el->el_line.cursor++;
+		cv_delfini(el);
+		return CC_REFRESH;
+	}
+	return CC_CURSOR;
+}
diff --git a/src/search.h b/src/search.h
new file mode 100644
index 0000000..d9f27e5
--- /dev/null
+++ b/src/search.h
@@ -0,0 +1,66 @@
+/*	$NetBSD: search.h,v 1.9 2009/12/30 22:37:40 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)search.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.search.h: Line and history searching utilities
+ */
+#ifndef _h_el_search
+#define	_h_el_search
+
+#include "histedit.h"
+
+typedef struct el_search_t {
+	Char	*patbuf;		/* The pattern buffer		*/
+	size_t	 patlen;		/* Length of the pattern buffer	*/
+	int	 patdir;		/* Direction of the last search	*/
+	int	 chadir;		/* Character search direction	*/
+	Char	 chacha;		/* Character we are looking for	*/
+	char	 chatflg;		/* 0 if f, 1 if t */
+} el_search_t;
+
+
+protected int		el_match(const Char *, const Char *);
+protected int		search_init(EditLine *);
+protected void		search_end(EditLine *);
+protected int		c_hmatch(EditLine *, const Char *);
+protected void		c_setpat(EditLine *);
+protected el_action_t	ce_inc_search(EditLine *, int);
+protected el_action_t	cv_search(EditLine *, int);
+protected el_action_t	ce_search_line(EditLine *, int);
+protected el_action_t	cv_repeat_srch(EditLine *, Int);
+protected el_action_t	cv_csearch(EditLine *, int, Int, int, int);
+
+#endif /* _h_el_search */
diff --git a/src/shlib_version b/src/shlib_version
new file mode 100644
index 0000000..303609d
--- /dev/null
+++ b/src/shlib_version
@@ -0,0 +1,5 @@
+#	$NetBSD: shlib_version,v 1.19 2013/01/22 20:23:21 christos Exp $
+#	Remember to update distrib/sets/lists/base/shl.* when changing
+#
+major=3
+minor=1
diff --git a/src/sig.c b/src/sig.c
new file mode 100644
index 0000000..a5a8a89
--- /dev/null
+++ b/src/sig.c
@@ -0,0 +1,200 @@
+/*	$NetBSD: sig.c,v 1.17 2011/07/28 20:50:55 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)sig.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: sig.c,v 1.17 2011/07/28 20:50:55 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * sig.c: Signal handling stuff.
+ *	  our policy is to trap all signals, set a good state
+ *	  and pass the ball to our caller.
+ */
+#include "el.h"
+#include <stdlib.h>
+
+private EditLine *sel = NULL;
+
+private const int sighdl[] = {
+#define	_DO(a)	(a),
+	ALLSIGS
+#undef	_DO
+	- 1
+};
+
+private void sig_handler(int);
+
+/* sig_handler():
+ *	This is the handler called for all signals
+ *	XXX: we cannot pass any data so we just store the old editline
+ *	state in a private variable
+ */
+private void
+sig_handler(int signo)
+{
+	int i;
+	sigset_t nset, oset;
+
+	(void) sigemptyset(&nset);
+	(void) sigaddset(&nset, signo);
+	(void) sigprocmask(SIG_BLOCK, &nset, &oset);
+
+	sel->el_signal->sig_no = signo;
+
+	switch (signo) {
+	case SIGCONT:
+		tty_rawmode(sel);
+		if (ed_redisplay(sel, 0) == CC_REFRESH)
+			re_refresh(sel);
+		terminal__flush(sel);
+		break;
+
+	case SIGWINCH:
+		el_resize(sel);
+		break;
+
+	default:
+		tty_cookedmode(sel);
+		break;
+	}
+
+	for (i = 0; sighdl[i] != -1; i++)
+		if (signo == sighdl[i])
+			break;
+
+	(void) sigaction(signo, &sel->el_signal->sig_action[i], NULL);
+	sel->el_signal->sig_action[i].sa_handler = SIG_ERR;
+	sel->el_signal->sig_action[i].sa_flags = 0;
+	sigemptyset(&sel->el_signal->sig_action[i].sa_mask);
+	(void) sigprocmask(SIG_SETMASK, &oset, NULL);
+	(void) kill(0, signo);
+}
+
+
+/* sig_init():
+ *	Initialize all signal stuff
+ */
+protected int
+sig_init(EditLine *el)
+{
+	size_t i;
+	sigset_t *nset, oset;
+
+	el->el_signal = el_malloc(sizeof(*el->el_signal));
+	if (el->el_signal == NULL)
+		return -1;
+
+	nset = &el->el_signal->sig_set;
+	(void) sigemptyset(nset);
+#define	_DO(a) (void) sigaddset(nset, a);
+	ALLSIGS
+#undef	_DO
+	(void) sigprocmask(SIG_BLOCK, nset, &oset);
+
+	for (i = 0; sighdl[i] != -1; i++) {
+		el->el_signal->sig_action[i].sa_handler = SIG_ERR;
+		el->el_signal->sig_action[i].sa_flags = 0;
+		sigemptyset(&el->el_signal->sig_action[i].sa_mask);
+	}
+
+	(void) sigprocmask(SIG_SETMASK, &oset, NULL);
+
+	return 0;
+}
+
+
+/* sig_end():
+ *	Clear all signal stuff
+ */
+protected void
+sig_end(EditLine *el)
+{
+
+	el_free(el->el_signal);
+	el->el_signal = NULL;
+}
+
+
+/* sig_set():
+ *	set all the signal handlers
+ */
+protected void
+sig_set(EditLine *el)
+{
+	size_t i;
+	sigset_t oset;
+	struct sigaction osa, nsa;
+
+	nsa.sa_handler = sig_handler;
+	nsa.sa_flags = 0;
+	sigemptyset(&nsa.sa_mask);
+
+	(void) sigprocmask(SIG_BLOCK, &el->el_signal->sig_set, &oset);
+
+	for (i = 0; sighdl[i] != -1; i++) {
+		/* This could happen if we get interrupted */
+		if (sigaction(sighdl[i], &nsa, &osa) != -1 &&
+		    osa.sa_handler != sig_handler)
+			el->el_signal->sig_action[i] = osa;
+	}
+	sel = el;
+	(void) sigprocmask(SIG_SETMASK, &oset, NULL);
+}
+
+
+/* sig_clr():
+ *	clear all the signal handlers
+ */
+protected void
+sig_clr(EditLine *el)
+{
+	size_t i;
+	sigset_t oset;
+
+	(void) sigprocmask(SIG_BLOCK, &el->el_signal->sig_set, &oset);
+
+	for (i = 0; sighdl[i] != -1; i++)
+		if (el->el_signal->sig_action[i].sa_handler != SIG_ERR)
+			(void)sigaction(sighdl[i],
+			    &el->el_signal->sig_action[i], NULL);
+
+	sel = NULL;		/* we are going to die if the handler is
+				 * called */
+	(void)sigprocmask(SIG_SETMASK, &oset, NULL);
+}
diff --git a/src/sig.h b/src/sig.h
new file mode 100644
index 0000000..c957cfd
--- /dev/null
+++ b/src/sig.h
@@ -0,0 +1,72 @@
+/*	$NetBSD: sig.h,v 1.8 2009/02/19 15:20:22 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)sig.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.sig.h: Signal handling functions
+ */
+#ifndef _h_el_sig
+#define	_h_el_sig
+
+#include <signal.h>
+
+#include "histedit.h"
+
+/*
+ * Define here all the signals we are going to handle
+ * The _DO macro is used to iterate in the source code
+ */
+#define	ALLSIGS		\
+	_DO(SIGINT)	\
+	_DO(SIGTSTP)	\
+	_DO(SIGQUIT)	\
+	_DO(SIGHUP)	\
+	_DO(SIGTERM)	\
+	_DO(SIGCONT)	\
+	_DO(SIGWINCH)
+#define ALLSIGSNO	7
+
+typedef struct {
+	struct sigaction sig_action[ALLSIGSNO];
+	sigset_t sig_set;
+	volatile sig_atomic_t sig_no;
+} *el_signal_t;
+
+protected void	sig_end(EditLine*);
+protected int	sig_init(EditLine*);
+protected void	sig_set(EditLine*);
+protected void	sig_clr(EditLine*);
+
+#endif /* _h_el_sig */
diff --git a/src/strlcat.c b/src/strlcat.c
new file mode 100644
index 0000000..c1ef3a2
--- /dev/null
+++ b/src/strlcat.c
@@ -0,0 +1,90 @@
+/*	$NetBSD: strlcat.c,v 1.4 2013/01/23 07:57:27 matt Exp $	*/
+/*	$OpenBSD: strlcat.c,v 1.10 2003/04/12 21:56:39 millert Exp $	*/
+
+/*
+ * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND TODD C. MILLER DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL TODD C. MILLER BE LIABLE
+ * FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "config.h"
+
+#if defined(LIBC_SCCS) && !defined(lint)
+__RCSID("$NetBSD: strlcat.c,v 1.4 2013/01/23 07:57:27 matt Exp $");
+#endif /* LIBC_SCCS and not lint */
+
+#include <sys/types.h>
+#include <assert.h>
+#include <string.h>
+
+#ifdef _LIBC
+# ifdef __weak_alias
+__weak_alias(strlcat, _strlcat)
+# endif
+#endif
+
+#if !HAVE_STRLCAT
+/*
+ * Appends src to string dst of size siz (unlike strncat, siz is the
+ * full size of dst, not space left).  At most siz-1 characters
+ * will be copied.  Always NUL terminates (unless siz <= strlen(dst)).
+ * Returns strlen(src) + MIN(siz, strlen(initial dst)).
+ * If retval >= siz, truncation occurred.
+ */
+size_t
+strlcat(char *dst, const char *src, size_t siz)
+{
+#if 1
+	char *d = dst;
+	const char *s = src;
+	size_t n = siz;
+	size_t dlen;
+
+	_DIAGASSERT(dst != NULL);
+	_DIAGASSERT(src != NULL);
+
+	/* Find the end of dst and adjust bytes left but don't go past end */
+	while (n-- != 0 && *d != '\0')
+		d++;
+	dlen = d - dst;
+	n = siz - dlen;
+
+	if (n == 0)
+		return(dlen + strlen(s));
+	while (*s != '\0') {
+		if (n != 1) {
+			*d++ = *s;
+			n--;
+		}
+		s++;
+	}
+	*d = '\0';
+
+	return(dlen + (s - src));	/* count does not include NUL */
+#else
+	_DIAGASSERT(dst != NULL);
+	_DIAGASSERT(src != NULL);
+
+	/*
+	 * Find length of string in dst (maxing out at siz).
+	 */
+	size_t dlen = strnlen(dst, siz);
+
+	/*
+	 * Copy src into any remaining space in dst (truncating if needed).
+	 * Note strlcpy(dst, src, 0) returns strlen(src).
+	 */
+	return dlen + strlcpy(dst + dlen, src, siz - dlen);
+#endif
+}
+#endif
diff --git a/src/strlcpy.c b/src/strlcpy.c
new file mode 100644
index 0000000..8b3dfad
--- /dev/null
+++ b/src/strlcpy.c
@@ -0,0 +1,70 @@
+/*	$NetBSD: strlcpy.c,v 1.3 2007/06/04 18:19:27 christos Exp $	*/
+/*	$OpenBSD: strlcpy.c,v 1.7 2003/04/12 21:56:39 millert Exp $	*/
+
+/*
+ * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND TODD C. MILLER DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL TODD C. MILLER BE LIABLE
+ * FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "config.h"
+
+#if defined(LIBC_SCCS) && !defined(lint)
+__RCSID("$NetBSD: strlcpy.c,v 1.3 2007/06/04 18:19:27 christos Exp $");
+#endif /* LIBC_SCCS and not lint */
+
+#include <sys/types.h>
+#include <assert.h>
+#include <string.h>
+
+#ifdef _LIBC
+# ifdef __weak_alias
+__weak_alias(strlcpy, _strlcpy)
+# endif
+#endif
+
+#if !HAVE_STRLCPY
+/*
+ * Copy src to string dst of size siz.  At most siz-1 characters
+ * will be copied.  Always NUL terminates (unless siz == 0).
+ * Returns strlen(src); if retval >= siz, truncation occurred.
+ */
+size_t
+strlcpy(char *dst, const char *src, size_t siz)
+{
+	char *d = dst;
+	const char *s = src;
+	size_t n = siz;
+
+	_DIAGASSERT(dst != NULL);
+	_DIAGASSERT(src != NULL);
+
+	/* Copy as many bytes as will fit */
+	if (n != 0 && --n != 0) {
+		do {
+			if ((*d++ = *s++) == 0)
+				break;
+		} while (--n != 0);
+	}
+
+	/* Not enough room in dst, add NUL and traverse rest of src */
+	if (n == 0) {
+		if (siz != 0)
+			*d = '\0';		/* NUL-terminate dst */
+		while (*s++)
+			;
+	}
+
+	return(s - src - 1);	/* count does not include NUL */
+}
+#endif
diff --git a/src/sys.h b/src/sys.h
new file mode 100644
index 0000000..25b14bb
--- /dev/null
+++ b/src/sys.h
@@ -0,0 +1,142 @@
+/*	$NetBSD: sys.h,v 1.17 2011/09/28 14:08:04 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)sys.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * sys.h: Put all the stupid compiler and system dependencies here...
+ */
+#ifndef _h_sys
+#define	_h_sys
+
+#ifdef HAVE_SYS_CDEFS_H
+#include <sys/cdefs.h>
+#endif
+
+#if !defined(__attribute__) && (defined(__cplusplus) || !defined(__GNUC__)  || __GNUC__ == 2 && __GNUC_MINOR__ < 8)
+# define __attribute__(A)
+#endif
+
+#ifndef _DIAGASSERT
+# define _DIAGASSERT(x)
+#endif
+
+#ifndef __BEGIN_DECLS
+# ifdef  __cplusplus
+#  define __BEGIN_DECLS  extern "C" {
+#  define __END_DECLS    }
+# else
+#  define __BEGIN_DECLS
+#  define __END_DECLS
+# endif
+#endif
+ 
+#ifndef public
+# define public		/* Externally visible functions/variables */
+#endif
+
+#ifndef private
+# define private	static	/* Always hidden internals */
+#endif
+
+#ifndef protected
+# define protected	/* Redefined from elsewhere to "static" */
+			/* When we want to hide everything	*/
+#endif
+
+#ifndef __arraycount
+# define __arraycount(a) (sizeof(a) / sizeof(*(a)))
+#endif
+
+#ifndef _PTR_T
+# define _PTR_T
+typedef void	*ptr_t;
+#endif
+
+#ifndef _IOCTL_T
+# define _IOCTL_T
+typedef void	*ioctl_t;
+#endif
+
+#include <stdio.h>
+
+#ifndef HAVE_STRLCAT
+#define	strlcat libedit_strlcat
+size_t	strlcat(char *dst, const char *src, size_t size);
+#endif
+
+#ifndef HAVE_STRLCPY
+#define	strlcpy libedit_strlcpy
+size_t	strlcpy(char *dst, const char *src, size_t size);
+#endif
+
+#ifndef HAVE_FGETLN
+#define	fgetln libedit_fgetln
+char	*fgetln(FILE *fp, size_t *len);
+#endif
+
+#ifndef HAVE_WCSDUP
+#include <wchar.h>
+wchar_t *wcsdup(const wchar_t *);
+#endif
+
+#ifndef _DIAGASSERT
+#define _DIAGASSERT(x)
+#endif
+
+#ifndef __RCSID
+#define __RCSID(x)
+#endif
+
+#ifndef HAVE_U_INT32_T
+typedef unsigned int	u_int32_t;
+#endif
+
+#ifndef SIZE_T_MAX
+#define SIZE_T_MAX	((size_t)-1)
+#endif
+
+#define	REGEX		/* Use POSIX.2 regular expression functions */
+#undef	REGEXP		/* Use UNIX V8 regular expression functions */
+
+#if defined(__sun)
+extern int tgetent(char *, const char *);
+extern int tgetflag(char *);
+extern int tgetnum(char *);
+extern int tputs(const char *, int, int (*)(int));
+extern char* tgoto(const char*, int, int);
+extern char* tgetstr(char*, char**);
+#endif
+
+#endif /* _h_sys */
diff --git a/src/terminal.c b/src/terminal.c
new file mode 100644
index 0000000..f280d58
--- /dev/null
+++ b/src/terminal.c
@@ -0,0 +1,1673 @@
+/*	$NetBSD: terminal.c,v 1.14 2012/05/30 18:21:14 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)term.c	8.2 (Berkeley) 4/30/95";
+#else
+__RCSID("$NetBSD: terminal.c,v 1.14 2012/05/30 18:21:14 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * terminal.c: Editor/termcap-curses interface
+ *	       We have to declare a static variable here, since the
+ *	       termcap putchar routine does not take an argument!
+ */
+#include <stdio.h>
+#include <signal.h>
+#include <string.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <limits.h>
+#ifdef HAVE_TERMCAP_H
+#include <termcap.h>
+#endif
+#ifdef HAVE_CURSES_H
+#include <curses.h>
+#elif HAVE_NCURSES_H
+#include <ncurses.h>
+#endif
+
+/* Solaris's term.h does horrid things. */
+#if defined(HAVE_TERM_H) && !defined(__sun) && !defined(HAVE_TERMCAP_H)
+#include <term.h>
+#endif
+ 
+#include <sys/types.h>
+#include <sys/ioctl.h>
+
+#ifdef _REENTRANT
+#include <pthread.h>
+#endif
+
+#include "el.h"
+
+/*
+ * IMPORTANT NOTE: these routines are allowed to look at the current screen
+ * and the current position assuming that it is correct.  If this is not
+ * true, then the update will be WRONG!  This is (should be) a valid
+ * assumption...
+ */
+
+#define	TC_BUFSIZE	((size_t)2048)
+
+#define	GoodStr(a)	(el->el_terminal.t_str[a] != NULL && \
+			    el->el_terminal.t_str[a][0] != '\0')
+#define	Str(a)		el->el_terminal.t_str[a]
+#define	Val(a)		el->el_terminal.t_val[a]
+
+private const struct termcapstr {
+	const char *name;
+	const char *long_name;
+} tstr[] = {
+#define	T_al	0
+	{ "al", "add new blank line" },
+#define	T_bl	1
+	{ "bl", "audible bell" },
+#define	T_cd	2
+	{ "cd", "clear to bottom" },
+#define	T_ce	3
+	{ "ce", "clear to end of line" },
+#define	T_ch	4
+	{ "ch", "cursor to horiz pos" },
+#define	T_cl	5
+	{ "cl", "clear screen" },
+#define	T_dc	6
+	{ "dc", "delete a character" },
+#define	T_dl	7
+	{ "dl", "delete a line" },
+#define	T_dm	8
+	{ "dm", "start delete mode" },
+#define	T_ed	9
+	{ "ed", "end delete mode" },
+#define	T_ei	10
+	{ "ei", "end insert mode" },
+#define	T_fs	11
+	{ "fs", "cursor from status line" },
+#define	T_ho	12
+	{ "ho", "home cursor" },
+#define	T_ic	13
+	{ "ic", "insert character" },
+#define	T_im	14
+	{ "im", "start insert mode" },
+#define	T_ip	15
+	{ "ip", "insert padding" },
+#define	T_kd	16
+	{ "kd", "sends cursor down" },
+#define	T_kl	17
+	{ "kl", "sends cursor left" },
+#define	T_kr	18
+	{ "kr", "sends cursor right" },
+#define	T_ku	19
+	{ "ku", "sends cursor up" },
+#define	T_md	20
+	{ "md", "begin bold" },
+#define	T_me	21
+	{ "me", "end attributes" },
+#define	T_nd	22
+	{ "nd", "non destructive space" },
+#define	T_se	23
+	{ "se", "end standout" },
+#define	T_so	24
+	{ "so", "begin standout" },
+#define	T_ts	25
+	{ "ts", "cursor to status line" },
+#define	T_up	26
+	{ "up", "cursor up one" },
+#define	T_us	27
+	{ "us", "begin underline" },
+#define	T_ue	28
+	{ "ue", "end underline" },
+#define	T_vb	29
+	{ "vb", "visible bell" },
+#define	T_DC	30
+	{ "DC", "delete multiple chars" },
+#define	T_DO	31
+	{ "DO", "cursor down multiple" },
+#define	T_IC	32
+	{ "IC", "insert multiple chars" },
+#define	T_LE	33
+	{ "LE", "cursor left multiple" },
+#define	T_RI	34
+	{ "RI", "cursor right multiple" },
+#define	T_UP	35
+	{ "UP", "cursor up multiple" },
+#define	T_kh	36
+	{ "kh", "send cursor home" },
+#define	T_at7	37
+	{ "@7", "send cursor end" },
+#define	T_kD	38
+	{ "kD", "send cursor delete" },
+#define	T_str	39
+	{ NULL, NULL }
+};
+
+private const struct termcapval {
+	const char *name;
+	const char *long_name;
+} tval[] = {
+#define	T_am	0
+	{ "am", "has automatic margins" },
+#define	T_pt	1
+	{ "pt", "has physical tabs" },
+#define	T_li	2
+	{ "li", "Number of lines" },
+#define	T_co	3
+	{ "co", "Number of columns" },
+#define	T_km	4
+	{ "km", "Has meta key" },
+#define	T_xt	5
+	{ "xt", "Tab chars destructive" },
+#define	T_xn	6
+	{ "xn", "newline ignored at right margin" },
+#define	T_MT	7
+	{ "MT", "Has meta key" },			/* XXX? */
+#define	T_val	8
+	{ NULL, NULL, }
+};
+/* do two or more of the attributes use me */
+
+private void	terminal_setflags(EditLine *);
+private int	terminal_rebuffer_display(EditLine *);
+private void	terminal_free_display(EditLine *);
+private int	terminal_alloc_display(EditLine *);
+private void	terminal_alloc(EditLine *, const struct termcapstr *,
+    const char *);
+private void	terminal_init_arrow(EditLine *);
+private void	terminal_reset_arrow(EditLine *);
+private int	terminal_putc(int);
+private void	terminal_tputs(EditLine *, const char *, int);
+
+#ifdef _REENTRANT
+private pthread_mutex_t terminal_mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+private FILE *terminal_outfile = NULL;
+
+
+/* terminal_setflags():
+ *	Set the terminal capability flags
+ */
+private void
+terminal_setflags(EditLine *el)
+{
+	EL_FLAGS = 0;
+	if (el->el_tty.t_tabs)
+		EL_FLAGS |= (Val(T_pt) && !Val(T_xt)) ? TERM_CAN_TAB : 0;
+
+	EL_FLAGS |= (Val(T_km) || Val(T_MT)) ? TERM_HAS_META : 0;
+	EL_FLAGS |= GoodStr(T_ce) ? TERM_CAN_CEOL : 0;
+	EL_FLAGS |= (GoodStr(T_dc) || GoodStr(T_DC)) ? TERM_CAN_DELETE : 0;
+	EL_FLAGS |= (GoodStr(T_im) || GoodStr(T_ic) || GoodStr(T_IC)) ?
+	    TERM_CAN_INSERT : 0;
+	EL_FLAGS |= (GoodStr(T_up) || GoodStr(T_UP)) ? TERM_CAN_UP : 0;
+	EL_FLAGS |= Val(T_am) ? TERM_HAS_AUTO_MARGINS : 0;
+	EL_FLAGS |= Val(T_xn) ? TERM_HAS_MAGIC_MARGINS : 0;
+
+	if (GoodStr(T_me) && GoodStr(T_ue))
+		EL_FLAGS |= (strcmp(Str(T_me), Str(T_ue)) == 0) ?
+		    TERM_CAN_ME : 0;
+	else
+		EL_FLAGS &= ~TERM_CAN_ME;
+	if (GoodStr(T_me) && GoodStr(T_se))
+		EL_FLAGS |= (strcmp(Str(T_me), Str(T_se)) == 0) ?
+		    TERM_CAN_ME : 0;
+
+
+#ifdef DEBUG_SCREEN
+	if (!EL_CAN_UP) {
+		(void) fprintf(el->el_errfile,
+		    "WARNING: Your terminal cannot move up.\n");
+		(void) fprintf(el->el_errfile,
+		    "Editing may be odd for long lines.\n");
+	}
+	if (!EL_CAN_CEOL)
+		(void) fprintf(el->el_errfile, "no clear EOL capability.\n");
+	if (!EL_CAN_DELETE)
+		(void) fprintf(el->el_errfile, "no delete char capability.\n");
+	if (!EL_CAN_INSERT)
+		(void) fprintf(el->el_errfile, "no insert char capability.\n");
+#endif /* DEBUG_SCREEN */
+}
+
+/* terminal_init():
+ *	Initialize the terminal stuff
+ */
+protected int
+terminal_init(EditLine *el)
+{
+
+	el->el_terminal.t_buf = el_malloc(TC_BUFSIZE *
+	    sizeof(*el->el_terminal.t_buf));
+	if (el->el_terminal.t_buf == NULL)
+		return -1;
+	el->el_terminal.t_cap = el_malloc(TC_BUFSIZE *
+	    sizeof(*el->el_terminal.t_cap));
+	if (el->el_terminal.t_cap == NULL)
+		return -1;
+	el->el_terminal.t_fkey = el_malloc(A_K_NKEYS *
+	    sizeof(*el->el_terminal.t_fkey));
+	if (el->el_terminal.t_fkey == NULL)
+		return -1;
+	el->el_terminal.t_loc = 0;
+	el->el_terminal.t_str = el_malloc(T_str *
+	    sizeof(*el->el_terminal.t_str));
+	if (el->el_terminal.t_str == NULL)
+		return -1;
+	(void) memset(el->el_terminal.t_str, 0, T_str *
+	    sizeof(*el->el_terminal.t_str));
+	el->el_terminal.t_val = el_malloc(T_val *
+	    sizeof(*el->el_terminal.t_val));
+	if (el->el_terminal.t_val == NULL)
+		return -1;
+	(void) memset(el->el_terminal.t_val, 0, T_val *
+	    sizeof(*el->el_terminal.t_val));
+	(void) terminal_set(el, NULL);
+	terminal_init_arrow(el);
+	return 0;
+}
+
+/* terminal_end():
+ *	Clean up the terminal stuff
+ */
+protected void
+terminal_end(EditLine *el)
+{
+
+	el_free(el->el_terminal.t_buf);
+	el->el_terminal.t_buf = NULL;
+	el_free(el->el_terminal.t_cap);
+	el->el_terminal.t_cap = NULL;
+	el->el_terminal.t_loc = 0;
+	el_free(el->el_terminal.t_str);
+	el->el_terminal.t_str = NULL;
+	el_free(el->el_terminal.t_val);
+	el->el_terminal.t_val = NULL;
+	el_free(el->el_terminal.t_fkey);
+	el->el_terminal.t_fkey = NULL;
+	terminal_free_display(el);
+}
+
+
+/* terminal_alloc():
+ *	Maintain a string pool for termcap strings
+ */
+private void
+terminal_alloc(EditLine *el, const struct termcapstr *t, const char *cap)
+{
+	char termbuf[TC_BUFSIZE];
+	size_t tlen, clen;
+	char **tlist = el->el_terminal.t_str;
+	char **tmp, **str = &tlist[t - tstr];
+
+	(void) memset(termbuf, 0, sizeof(termbuf));
+	if (cap == NULL || *cap == '\0') {
+		*str = NULL;
+		return;
+	} else
+		clen = strlen(cap);
+
+	tlen = *str == NULL ? 0 : strlen(*str);
+
+	/*
+         * New string is shorter; no need to allocate space
+         */
+	if (clen <= tlen) {
+		if (*str)
+			(void) strcpy(*str, cap);	/* XXX strcpy is safe */
+		return;
+	}
+	/*
+         * New string is longer; see if we have enough space to append
+         */
+	if (el->el_terminal.t_loc + 3 < TC_BUFSIZE) {
+						/* XXX strcpy is safe */
+		(void) strcpy(*str = &el->el_terminal.t_buf[
+		    el->el_terminal.t_loc], cap);
+		el->el_terminal.t_loc += clen + 1;	/* one for \0 */
+		return;
+	}
+	/*
+         * Compact our buffer; no need to check compaction, cause we know it
+         * fits...
+         */
+	tlen = 0;
+	for (tmp = tlist; tmp < &tlist[T_str]; tmp++)
+		if (*tmp != NULL && *tmp != '\0' && *tmp != *str) {
+			char *ptr;
+
+			for (ptr = *tmp; *ptr != '\0'; termbuf[tlen++] = *ptr++)
+				continue;
+			termbuf[tlen++] = '\0';
+		}
+	memcpy(el->el_terminal.t_buf, termbuf, TC_BUFSIZE);
+	el->el_terminal.t_loc = tlen;
+	if (el->el_terminal.t_loc + 3 >= TC_BUFSIZE) {
+		(void) fprintf(el->el_errfile,
+		    "Out of termcap string space.\n");
+		return;
+	}
+					/* XXX strcpy is safe */
+	(void) strcpy(*str = &el->el_terminal.t_buf[el->el_terminal.t_loc],
+	    cap);
+	el->el_terminal.t_loc += (size_t)clen + 1;	/* one for \0 */
+	return;
+}
+
+
+/* terminal_rebuffer_display():
+ *	Rebuffer the display after the screen changed size
+ */
+private int
+terminal_rebuffer_display(EditLine *el)
+{
+	coord_t *c = &el->el_terminal.t_size;
+
+	terminal_free_display(el);
+
+	c->h = Val(T_co);
+	c->v = Val(T_li);
+
+	if (terminal_alloc_display(el) == -1)
+		return -1;
+	return 0;
+}
+
+
+/* terminal_alloc_display():
+ *	Allocate a new display.
+ */
+private int
+terminal_alloc_display(EditLine *el)
+{
+	int i;
+	Char **b;
+	coord_t *c = &el->el_terminal.t_size;
+
+	b =  el_malloc(sizeof(*b) * (size_t)(c->v + 1));
+	if (b == NULL)
+		return -1;
+	for (i = 0; i < c->v; i++) {
+		b[i] = el_malloc(sizeof(**b) * (size_t)(c->h + 1));
+		if (b[i] == NULL) {
+			while (--i >= 0)
+				el_free(b[i]);
+			el_free(b);
+			return -1;
+		}
+	}
+	b[c->v] = NULL;
+	el->el_display = b;
+
+	b = el_malloc(sizeof(*b) * (size_t)(c->v + 1));
+	if (b == NULL)
+		return -1;
+	for (i = 0; i < c->v; i++) {
+		b[i] = el_malloc(sizeof(**b) * (size_t)(c->h + 1));
+		if (b[i] == NULL) {
+			while (--i >= 0)
+				el_free(b[i]);
+			el_free(b);
+			return -1;
+		}
+	}
+	b[c->v] = NULL;
+	el->el_vdisplay = b;
+	return 0;
+}
+
+
+/* terminal_free_display():
+ *	Free the display buffers
+ */
+private void
+terminal_free_display(EditLine *el)
+{
+	Char **b;
+	Char **bufp;
+
+	b = el->el_display;
+	el->el_display = NULL;
+	if (b != NULL) {
+		for (bufp = b; *bufp != NULL; bufp++)
+			el_free(*bufp);
+		el_free(b);
+	}
+	b = el->el_vdisplay;
+	el->el_vdisplay = NULL;
+	if (b != NULL) {
+		for (bufp = b; *bufp != NULL; bufp++)
+			el_free(*bufp);
+		el_free(b);
+	}
+}
+
+
+/* terminal_move_to_line():
+ *	move to line <where> (first line == 0)
+ * 	as efficiently as possible
+ */
+protected void
+terminal_move_to_line(EditLine *el, int where)
+{
+	int del;
+
+	if (where == el->el_cursor.v)
+		return;
+
+	if (where > el->el_terminal.t_size.v) {
+#ifdef DEBUG_SCREEN
+		(void) fprintf(el->el_errfile,
+		    "terminal_move_to_line: where is ridiculous: %d\r\n",
+		    where);
+#endif /* DEBUG_SCREEN */
+		return;
+	}
+	if ((del = where - el->el_cursor.v) > 0) {
+		while (del > 0) {
+			if (EL_HAS_AUTO_MARGINS &&
+			    el->el_display[el->el_cursor.v][0] != '\0') {
+                                size_t h = (size_t)
+				    (el->el_terminal.t_size.h - 1);
+#ifdef WIDECHAR
+                                for (; h > 0 &&
+                                         el->el_display[el->el_cursor.v][h] ==
+                                                 MB_FILL_CHAR;
+                                         h--)
+                                                continue;
+#endif
+				/* move without newline */
+				terminal_move_to_char(el, (int)h);
+				terminal_overwrite(el, &el->el_display
+				    [el->el_cursor.v][el->el_cursor.h],
+				    (size_t)(el->el_terminal.t_size.h -
+				    el->el_cursor.h));
+				/* updates Cursor */
+				del--;
+			} else {
+				if ((del > 1) && GoodStr(T_DO)) {
+					terminal_tputs(el, tgoto(Str(T_DO), del,
+					    del), del);
+					del = 0;
+				} else {
+					for (; del > 0; del--)
+						terminal__putc(el, '\n');
+					/* because the \n will become \r\n */
+					el->el_cursor.h = 0;
+				}
+			}
+		}
+	} else {		/* del < 0 */
+		if (GoodStr(T_UP) && (-del > 1 || !GoodStr(T_up)))
+			terminal_tputs(el, tgoto(Str(T_UP), -del, -del), -del);
+		else {
+			if (GoodStr(T_up))
+				for (; del < 0; del++)
+					terminal_tputs(el, Str(T_up), 1);
+		}
+	}
+	el->el_cursor.v = where;/* now where is here */
+}
+
+
+/* terminal_move_to_char():
+ *	Move to the character position specified
+ */
+protected void
+terminal_move_to_char(EditLine *el, int where)
+{
+	int del, i;
+
+mc_again:
+	if (where == el->el_cursor.h)
+		return;
+
+	if (where > el->el_terminal.t_size.h) {
+#ifdef DEBUG_SCREEN
+		(void) fprintf(el->el_errfile,
+		    "terminal_move_to_char: where is riduculous: %d\r\n",
+		    where);
+#endif /* DEBUG_SCREEN */
+		return;
+	}
+	if (!where) {		/* if where is first column */
+		terminal__putc(el, '\r');	/* do a CR */
+		el->el_cursor.h = 0;
+		return;
+	}
+	del = where - el->el_cursor.h;
+
+	if ((del < -4 || del > 4) && GoodStr(T_ch))
+		/* go there directly */
+		terminal_tputs(el, tgoto(Str(T_ch), where, where), where);
+	else {
+		if (del > 0) {	/* moving forward */
+			if ((del > 4) && GoodStr(T_RI))
+				terminal_tputs(el, tgoto(Str(T_RI), del, del),
+				    del);
+			else {
+					/* if I can do tabs, use them */
+				if (EL_CAN_TAB) {
+					if ((el->el_cursor.h & 0370) !=
+					    (where & ~0x7)
+#ifdef WIDECHAR
+					    && (el->el_display[
+					    el->el_cursor.v][where & 0370] !=
+					    MB_FILL_CHAR)
+#endif
+					    ) {
+						/* if not within tab stop */
+						for (i =
+						    (el->el_cursor.h & 0370);
+						    i < (where & ~0x7);
+						    i += 8)
+							terminal__putc(el,
+							    '\t');	
+							/* then tab over */
+						el->el_cursor.h = where & ~0x7;
+					}
+				}
+				/*
+				 * it's usually cheaper to just write the
+				 * chars, so we do.
+				 */
+				/*
+				 * NOTE THAT terminal_overwrite() WILL CHANGE
+				 * el->el_cursor.h!!!
+				 */
+				terminal_overwrite(el, &el->el_display[
+				    el->el_cursor.v][el->el_cursor.h],
+				    (size_t)(where - el->el_cursor.h));
+
+			}
+		} else {	/* del < 0 := moving backward */
+			if ((-del > 4) && GoodStr(T_LE))
+				terminal_tputs(el, tgoto(Str(T_LE), -del, -del),
+				    -del);
+			else {	/* can't go directly there */
+				/*
+				 * if the "cost" is greater than the "cost"
+				 * from col 0
+				 */
+				if (EL_CAN_TAB ?
+				    ((unsigned int)-del >
+				    (((unsigned int) where >> 3) +
+				     (where & 07)))
+				    : (-del > where)) {
+					terminal__putc(el, '\r');/* do a CR */
+					el->el_cursor.h = 0;
+					goto mc_again;	/* and try again */
+				}
+				for (i = 0; i < -del; i++)
+					terminal__putc(el, '\b');
+			}
+		}
+	}
+	el->el_cursor.h = where;		/* now where is here */
+}
+
+
+/* terminal_overwrite():
+ *	Overstrike num characters
+ *	Assumes MB_FILL_CHARs are present to keep the column count correct
+ */
+protected void
+terminal_overwrite(EditLine *el, const Char *cp, size_t n)
+{
+	if (n == 0)
+		return;
+
+	if (n > (size_t)el->el_terminal.t_size.h) {
+#ifdef DEBUG_SCREEN
+		(void) fprintf(el->el_errfile,
+		    "terminal_overwrite: n is riduculous: %d\r\n", n);
+#endif /* DEBUG_SCREEN */
+		return;
+	}
+
+        do {
+                /* terminal__putc() ignores any MB_FILL_CHARs */
+                terminal__putc(el, *cp++);
+                el->el_cursor.h++;
+        } while (--n);
+
+	if (el->el_cursor.h >= el->el_terminal.t_size.h) {	/* wrap? */
+		if (EL_HAS_AUTO_MARGINS) {	/* yes */
+			el->el_cursor.h = 0;
+			el->el_cursor.v++;
+			if (EL_HAS_MAGIC_MARGINS) {
+				/* force the wrap to avoid the "magic"
+				 * situation */
+				Char c;
+				if ((c = el->el_display[el->el_cursor.v]
+				    [el->el_cursor.h]) != '\0') {
+					terminal_overwrite(el, &c, (size_t)1);
+#ifdef WIDECHAR
+					while (el->el_display[el->el_cursor.v]
+					    [el->el_cursor.h] == MB_FILL_CHAR)
+						el->el_cursor.h++;
+#endif
+				} else {
+					terminal__putc(el, ' ');
+					el->el_cursor.h = 1;
+				}
+			}
+		} else		/* no wrap, but cursor stays on screen */
+			el->el_cursor.h = el->el_terminal.t_size.h - 1;
+	}
+}
+
+
+/* terminal_deletechars():
+ *	Delete num characters
+ */
+protected void
+terminal_deletechars(EditLine *el, int num)
+{
+	if (num <= 0)
+		return;
+
+	if (!EL_CAN_DELETE) {
+#ifdef DEBUG_EDIT
+		(void) fprintf(el->el_errfile, "   ERROR: cannot delete   \n");
+#endif /* DEBUG_EDIT */
+		return;
+	}
+	if (num > el->el_terminal.t_size.h) {
+#ifdef DEBUG_SCREEN
+		(void) fprintf(el->el_errfile,
+		    "terminal_deletechars: num is riduculous: %d\r\n", num);
+#endif /* DEBUG_SCREEN */
+		return;
+	}
+	if (GoodStr(T_DC))	/* if I have multiple delete */
+		if ((num > 1) || !GoodStr(T_dc)) {	/* if dc would be more
+							 * expen. */
+			terminal_tputs(el, tgoto(Str(T_DC), num, num), num);
+			return;
+		}
+	if (GoodStr(T_dm))	/* if I have delete mode */
+		terminal_tputs(el, Str(T_dm), 1);
+
+	if (GoodStr(T_dc))	/* else do one at a time */
+		while (num--)
+			terminal_tputs(el, Str(T_dc), 1);
+
+	if (GoodStr(T_ed))	/* if I have delete mode */
+		terminal_tputs(el, Str(T_ed), 1);
+}
+
+
+/* terminal_insertwrite():
+ *	Puts terminal in insert character mode or inserts num
+ *	characters in the line
+ *      Assumes MB_FILL_CHARs are present to keep column count correct
+ */
+protected void
+terminal_insertwrite(EditLine *el, Char *cp, int num)
+{
+	if (num <= 0)
+		return;
+	if (!EL_CAN_INSERT) {
+#ifdef DEBUG_EDIT
+		(void) fprintf(el->el_errfile, "   ERROR: cannot insert   \n");
+#endif /* DEBUG_EDIT */
+		return;
+	}
+	if (num > el->el_terminal.t_size.h) {
+#ifdef DEBUG_SCREEN
+		(void) fprintf(el->el_errfile,
+		    "StartInsert: num is riduculous: %d\r\n", num);
+#endif /* DEBUG_SCREEN */
+		return;
+	}
+	if (GoodStr(T_IC))	/* if I have multiple insert */
+		if ((num > 1) || !GoodStr(T_ic)) {
+				/* if ic would be more expensive */
+			terminal_tputs(el, tgoto(Str(T_IC), num, num), num);
+			terminal_overwrite(el, cp, (size_t)num);
+				/* this updates el_cursor.h */
+			return;
+		}
+	if (GoodStr(T_im) && GoodStr(T_ei)) {	/* if I have insert mode */
+		terminal_tputs(el, Str(T_im), 1);
+
+		el->el_cursor.h += num;
+		do
+			terminal__putc(el, *cp++);
+		while (--num);
+
+		if (GoodStr(T_ip))	/* have to make num chars insert */
+			terminal_tputs(el, Str(T_ip), 1);
+
+		terminal_tputs(el, Str(T_ei), 1);
+		return;
+	}
+	do {
+		if (GoodStr(T_ic))	/* have to make num chars insert */
+			terminal_tputs(el, Str(T_ic), 1);
+
+		terminal__putc(el, *cp++);
+
+		el->el_cursor.h++;
+
+		if (GoodStr(T_ip))	/* have to make num chars insert */
+			terminal_tputs(el, Str(T_ip), 1);
+					/* pad the inserted char */
+
+	} while (--num);
+}
+
+
+/* terminal_clear_EOL():
+ *	clear to end of line.  There are num characters to clear
+ */
+protected void
+terminal_clear_EOL(EditLine *el, int num)
+{
+	int i;
+
+	if (EL_CAN_CEOL && GoodStr(T_ce))
+		terminal_tputs(el, Str(T_ce), 1);
+	else {
+		for (i = 0; i < num; i++)
+			terminal__putc(el, ' ');
+		el->el_cursor.h += num;	/* have written num spaces */
+	}
+}
+
+
+/* terminal_clear_screen():
+ *	Clear the screen
+ */
+protected void
+terminal_clear_screen(EditLine *el)
+{				/* clear the whole screen and home */
+
+	if (GoodStr(T_cl))
+		/* send the clear screen code */
+		terminal_tputs(el, Str(T_cl), Val(T_li));
+	else if (GoodStr(T_ho) && GoodStr(T_cd)) {
+		terminal_tputs(el, Str(T_ho), Val(T_li));	/* home */
+		/* clear to bottom of screen */
+		terminal_tputs(el, Str(T_cd), Val(T_li));
+	} else {
+		terminal__putc(el, '\r');
+		terminal__putc(el, '\n');
+	}
+}
+
+
+/* terminal_beep():
+ *	Beep the way the terminal wants us
+ */
+protected void
+terminal_beep(EditLine *el)
+{
+	if (GoodStr(T_bl))
+		/* what termcap says we should use */
+		terminal_tputs(el, Str(T_bl), 1);
+	else
+		terminal__putc(el, '\007');	/* an ASCII bell; ^G */
+}
+
+
+protected void
+terminal_get(EditLine *el, const char **term)
+{
+	*term = el->el_terminal.t_name;
+}
+
+
+/* terminal_set():
+ *	Read in the terminal capabilities from the requested terminal
+ */
+protected int
+terminal_set(EditLine *el, const char *term)
+{
+	int i;
+	char buf[TC_BUFSIZE];
+	char *area;
+	const struct termcapstr *t;
+	sigset_t oset, nset;
+	int lins, cols;
+
+	(void) sigemptyset(&nset);
+	(void) sigaddset(&nset, SIGWINCH);
+	(void) sigprocmask(SIG_BLOCK, &nset, &oset);
+
+	area = buf;
+
+
+	if (term == NULL)
+		term = getenv("TERM");
+
+	if (!term || !term[0])
+		term = "dumb";
+
+	if (strcmp(term, "emacs") == 0)
+		el->el_flags |= EDIT_DISABLED;
+
+	(void) memset(el->el_terminal.t_cap, 0, TC_BUFSIZE);
+
+	i = tgetent(el->el_terminal.t_cap, term);
+
+	if (i <= 0) {
+		if (i == -1)
+			(void) fprintf(el->el_errfile,
+			    "Cannot read termcap database;\n");
+		else if (i == 0)
+			(void) fprintf(el->el_errfile,
+			    "No entry for terminal type \"%s\";\n", term);
+		(void) fprintf(el->el_errfile,
+		    "using dumb terminal settings.\n");
+		Val(T_co) = 80;	/* do a dumb terminal */
+		Val(T_pt) = Val(T_km) = Val(T_li) = 0;
+		Val(T_xt) = Val(T_MT);
+		for (t = tstr; t->name != NULL; t++)
+			terminal_alloc(el, t, NULL);
+	} else {
+		/* auto/magic margins */
+		Val(T_am) = tgetflag("am");
+		Val(T_xn) = tgetflag("xn");
+		/* Can we tab */
+		Val(T_pt) = tgetflag("pt");
+		Val(T_xt) = tgetflag("xt");
+		/* do we have a meta? */
+		Val(T_km) = tgetflag("km");
+		Val(T_MT) = tgetflag("MT");
+		/* Get the size */
+		Val(T_co) = tgetnum("co");
+		Val(T_li) = tgetnum("li");
+		for (t = tstr; t->name != NULL; t++) {
+			/* XXX: some systems' tgetstr needs non const */
+			terminal_alloc(el, t, tgetstr(strchr(t->name, *t->name),
+			    &area));
+		}
+	}
+
+	if (Val(T_co) < 2)
+		Val(T_co) = 80;	/* just in case */
+	if (Val(T_li) < 1)
+		Val(T_li) = 24;
+
+	el->el_terminal.t_size.v = Val(T_co);
+	el->el_terminal.t_size.h = Val(T_li);
+
+	terminal_setflags(el);
+
+				/* get the correct window size */
+	(void) terminal_get_size(el, &lins, &cols);
+	if (terminal_change_size(el, lins, cols) == -1)
+		return -1;
+	(void) sigprocmask(SIG_SETMASK, &oset, NULL);
+	terminal_bind_arrow(el);
+	el->el_terminal.t_name = term;
+	return i <= 0 ? -1 : 0;
+}
+
+
+/* terminal_get_size():
+ *	Return the new window size in lines and cols, and
+ *	true if the size was changed.
+ */
+protected int
+terminal_get_size(EditLine *el, int *lins, int *cols)
+{
+
+	*cols = Val(T_co);
+	*lins = Val(T_li);
+
+#ifdef TIOCGWINSZ
+	{
+		struct winsize ws;
+		if (ioctl(el->el_infd, TIOCGWINSZ, &ws) != -1) {
+			if (ws.ws_col)
+				*cols = ws.ws_col;
+			if (ws.ws_row)
+				*lins = ws.ws_row;
+		}
+	}
+#endif
+#ifdef TIOCGSIZE
+	{
+		struct ttysize ts;
+		if (ioctl(el->el_infd, TIOCGSIZE, &ts) != -1) {
+			if (ts.ts_cols)
+				*cols = ts.ts_cols;
+			if (ts.ts_lines)
+				*lins = ts.ts_lines;
+		}
+	}
+#endif
+	return Val(T_co) != *cols || Val(T_li) != *lins;
+}
+
+
+/* terminal_change_size():
+ *	Change the size of the terminal
+ */
+protected int
+terminal_change_size(EditLine *el, int lins, int cols)
+{
+	/*
+         * Just in case
+         */
+	Val(T_co) = (cols < 2) ? 80 : cols;
+	Val(T_li) = (lins < 1) ? 24 : lins;
+
+	/* re-make display buffers */
+	if (terminal_rebuffer_display(el) == -1)
+		return -1;
+	re_clear_display(el);
+	return 0;
+}
+
+
+/* terminal_init_arrow():
+ *	Initialize the arrow key bindings from termcap
+ */
+private void
+terminal_init_arrow(EditLine *el)
+{
+	funckey_t *arrow = el->el_terminal.t_fkey;
+
+	arrow[A_K_DN].name = STR("down");
+	arrow[A_K_DN].key = T_kd;
+	arrow[A_K_DN].fun.cmd = ED_NEXT_HISTORY;
+	arrow[A_K_DN].type = XK_CMD;
+
+	arrow[A_K_UP].name = STR("up");
+	arrow[A_K_UP].key = T_ku;
+	arrow[A_K_UP].fun.cmd = ED_PREV_HISTORY;
+	arrow[A_K_UP].type = XK_CMD;
+
+	arrow[A_K_LT].name = STR("left");
+	arrow[A_K_LT].key = T_kl;
+	arrow[A_K_LT].fun.cmd = ED_PREV_CHAR;
+	arrow[A_K_LT].type = XK_CMD;
+
+	arrow[A_K_RT].name = STR("right");
+	arrow[A_K_RT].key = T_kr;
+	arrow[A_K_RT].fun.cmd = ED_NEXT_CHAR;
+	arrow[A_K_RT].type = XK_CMD;
+
+	arrow[A_K_HO].name = STR("home");
+	arrow[A_K_HO].key = T_kh;
+	arrow[A_K_HO].fun.cmd = ED_MOVE_TO_BEG;
+	arrow[A_K_HO].type = XK_CMD;
+
+	arrow[A_K_EN].name = STR("end");
+	arrow[A_K_EN].key = T_at7;
+	arrow[A_K_EN].fun.cmd = ED_MOVE_TO_END;
+	arrow[A_K_EN].type = XK_CMD;
+
+	arrow[A_K_DE].name = STR("delete");
+	arrow[A_K_DE].key = T_kD;
+	arrow[A_K_DE].fun.cmd = ED_DELETE_NEXT_CHAR;
+	arrow[A_K_DE].type = XK_CMD;
+}
+
+
+/* terminal_reset_arrow():
+ *	Reset arrow key bindings
+ */
+private void
+terminal_reset_arrow(EditLine *el)
+{
+	funckey_t *arrow = el->el_terminal.t_fkey;
+	static const Char strA[] = {033, '[', 'A', '\0'};
+	static const Char strB[] = {033, '[', 'B', '\0'};
+	static const Char strC[] = {033, '[', 'C', '\0'};
+	static const Char strD[] = {033, '[', 'D', '\0'};
+	static const Char strH[] = {033, '[', 'H', '\0'};
+	static const Char strF[] = {033, '[', 'F', '\0'};
+	static const Char stOA[] = {033, 'O', 'A', '\0'};
+	static const Char stOB[] = {033, 'O', 'B', '\0'};
+	static const Char stOC[] = {033, 'O', 'C', '\0'};
+	static const Char stOD[] = {033, 'O', 'D', '\0'};
+	static const Char stOH[] = {033, 'O', 'H', '\0'};
+	static const Char stOF[] = {033, 'O', 'F', '\0'};
+
+	keymacro_add(el, strA, &arrow[A_K_UP].fun, arrow[A_K_UP].type);
+	keymacro_add(el, strB, &arrow[A_K_DN].fun, arrow[A_K_DN].type);
+	keymacro_add(el, strC, &arrow[A_K_RT].fun, arrow[A_K_RT].type);
+	keymacro_add(el, strD, &arrow[A_K_LT].fun, arrow[A_K_LT].type);
+	keymacro_add(el, strH, &arrow[A_K_HO].fun, arrow[A_K_HO].type);
+	keymacro_add(el, strF, &arrow[A_K_EN].fun, arrow[A_K_EN].type);
+	keymacro_add(el, stOA, &arrow[A_K_UP].fun, arrow[A_K_UP].type);
+	keymacro_add(el, stOB, &arrow[A_K_DN].fun, arrow[A_K_DN].type);
+	keymacro_add(el, stOC, &arrow[A_K_RT].fun, arrow[A_K_RT].type);
+	keymacro_add(el, stOD, &arrow[A_K_LT].fun, arrow[A_K_LT].type);
+	keymacro_add(el, stOH, &arrow[A_K_HO].fun, arrow[A_K_HO].type);
+	keymacro_add(el, stOF, &arrow[A_K_EN].fun, arrow[A_K_EN].type);
+
+	if (el->el_map.type != MAP_VI)
+		return;
+	keymacro_add(el, &strA[1], &arrow[A_K_UP].fun, arrow[A_K_UP].type);
+	keymacro_add(el, &strB[1], &arrow[A_K_DN].fun, arrow[A_K_DN].type);
+	keymacro_add(el, &strC[1], &arrow[A_K_RT].fun, arrow[A_K_RT].type);
+	keymacro_add(el, &strD[1], &arrow[A_K_LT].fun, arrow[A_K_LT].type);
+	keymacro_add(el, &strH[1], &arrow[A_K_HO].fun, arrow[A_K_HO].type);
+	keymacro_add(el, &strF[1], &arrow[A_K_EN].fun, arrow[A_K_EN].type);
+	keymacro_add(el, &stOA[1], &arrow[A_K_UP].fun, arrow[A_K_UP].type);
+	keymacro_add(el, &stOB[1], &arrow[A_K_DN].fun, arrow[A_K_DN].type);
+	keymacro_add(el, &stOC[1], &arrow[A_K_RT].fun, arrow[A_K_RT].type);
+	keymacro_add(el, &stOD[1], &arrow[A_K_LT].fun, arrow[A_K_LT].type);
+	keymacro_add(el, &stOH[1], &arrow[A_K_HO].fun, arrow[A_K_HO].type);
+	keymacro_add(el, &stOF[1], &arrow[A_K_EN].fun, arrow[A_K_EN].type);
+}
+
+
+/* terminal_set_arrow():
+ *	Set an arrow key binding
+ */
+protected int
+terminal_set_arrow(EditLine *el, const Char *name, keymacro_value_t *fun,
+    int type)
+{
+	funckey_t *arrow = el->el_terminal.t_fkey;
+	int i;
+
+	for (i = 0; i < A_K_NKEYS; i++)
+		if (Strcmp(name, arrow[i].name) == 0) {
+			arrow[i].fun = *fun;
+			arrow[i].type = type;
+			return 0;
+		}
+	return -1;
+}
+
+
+/* terminal_clear_arrow():
+ *	Clear an arrow key binding
+ */
+protected int
+terminal_clear_arrow(EditLine *el, const Char *name)
+{
+	funckey_t *arrow = el->el_terminal.t_fkey;
+	int i;
+
+	for (i = 0; i < A_K_NKEYS; i++)
+		if (Strcmp(name, arrow[i].name) == 0) {
+			arrow[i].type = XK_NOD;
+			return 0;
+		}
+	return -1;
+}
+
+
+/* terminal_print_arrow():
+ *	Print the arrow key bindings
+ */
+protected void
+terminal_print_arrow(EditLine *el, const Char *name)
+{
+	int i;
+	funckey_t *arrow = el->el_terminal.t_fkey;
+
+	for (i = 0; i < A_K_NKEYS; i++)
+		if (*name == '\0' || Strcmp(name, arrow[i].name) == 0)
+			if (arrow[i].type != XK_NOD)
+				keymacro_kprint(el, arrow[i].name,
+				    &arrow[i].fun, arrow[i].type);
+}
+
+
+/* terminal_bind_arrow():
+ *	Bind the arrow keys
+ */
+protected void
+terminal_bind_arrow(EditLine *el)
+{
+	el_action_t *map;
+	const el_action_t *dmap;
+	int i, j;
+	char *p;
+	funckey_t *arrow = el->el_terminal.t_fkey;
+
+	/* Check if the components needed are initialized */
+	if (el->el_terminal.t_buf == NULL || el->el_map.key == NULL)
+		return;
+
+	map = el->el_map.type == MAP_VI ? el->el_map.alt : el->el_map.key;
+	dmap = el->el_map.type == MAP_VI ? el->el_map.vic : el->el_map.emacs;
+
+	terminal_reset_arrow(el);
+
+	for (i = 0; i < A_K_NKEYS; i++) {
+		Char wt_str[VISUAL_WIDTH_MAX];
+		Char *px;
+		size_t n;
+
+		p = el->el_terminal.t_str[arrow[i].key];
+		if (!p || !*p)
+			continue;
+		for (n = 0; n < VISUAL_WIDTH_MAX && p[n]; ++n)
+			wt_str[n] = p[n];
+		while (n < VISUAL_WIDTH_MAX)
+			wt_str[n++] = '\0';
+		px = wt_str;
+		j = (unsigned char) *p;
+		/*
+		 * Assign the arrow keys only if:
+		 *
+		 * 1. They are multi-character arrow keys and the user
+		 *    has not re-assigned the leading character, or
+		 *    has re-assigned the leading character to be
+		 *	  ED_SEQUENCE_LEAD_IN
+		 * 2. They are single arrow keys pointing to an
+		 *    unassigned key.
+		 */
+		if (arrow[i].type == XK_NOD)
+			keymacro_clear(el, map, px);
+		else {
+			if (p[1] && (dmap[j] == map[j] ||
+				map[j] == ED_SEQUENCE_LEAD_IN)) {
+				keymacro_add(el, px, &arrow[i].fun,
+				    arrow[i].type);
+				map[j] = ED_SEQUENCE_LEAD_IN;
+			} else if (map[j] == ED_UNASSIGNED) {
+				keymacro_clear(el, map, px);
+				if (arrow[i].type == XK_CMD)
+					map[j] = arrow[i].fun.cmd;
+				else
+					keymacro_add(el, px, &arrow[i].fun,
+					    arrow[i].type);
+			}
+		}
+	}
+}
+
+/* terminal_putc():
+ *	Add a character
+ */
+private int
+terminal_putc(int c)
+{
+	if (terminal_outfile == NULL)
+		return -1;
+	return fputc(c, terminal_outfile);
+}
+
+private void
+terminal_tputs(EditLine *el, const char *cap, int affcnt)
+{
+#ifdef _REENTRANT
+	pthread_mutex_lock(&terminal_mutex);
+#endif
+	terminal_outfile = el->el_outfile;
+	(void)tputs(cap, affcnt, terminal_putc);
+#ifdef _REENTRANT
+	pthread_mutex_unlock(&terminal_mutex);
+#endif
+}
+
+/* terminal__putc():
+ *	Add a character
+ */
+protected int
+terminal__putc(EditLine *el, Int c)
+{
+	char buf[MB_LEN_MAX +1];
+	ssize_t i;
+	if (c == (Int)MB_FILL_CHAR)
+		return 0;
+	i = ct_encode_char(buf, (size_t)MB_LEN_MAX, c);
+	if (i <= 0)
+		return (int)i;
+	buf[i] = '\0';
+	return fputs(buf, el->el_outfile);
+}
+
+/* terminal__flush():
+ *	Flush output
+ */
+protected void
+terminal__flush(EditLine *el)
+{
+
+	(void) fflush(el->el_outfile);
+}
+
+/* terminal_writec():
+ *	Write the given character out, in a human readable form
+ */
+protected void
+terminal_writec(EditLine *el, Int c)
+{
+	Char visbuf[VISUAL_WIDTH_MAX +1];
+	ssize_t vcnt = ct_visual_char(visbuf, VISUAL_WIDTH_MAX, c);
+	if (vcnt < 0)
+		vcnt = 0;
+	visbuf[vcnt] = '\0';
+	terminal_overwrite(el, visbuf, (size_t)vcnt);
+	terminal__flush(el);
+}
+
+
+/* terminal_telltc():
+ *	Print the current termcap characteristics
+ */
+protected int
+/*ARGSUSED*/
+terminal_telltc(EditLine *el, int argc __attribute__((__unused__)), 
+    const Char **argv __attribute__((__unused__)))
+{
+	const struct termcapstr *t;
+	char **ts;
+
+	(void) fprintf(el->el_outfile, "\n\tYour terminal has the\n");
+	(void) fprintf(el->el_outfile, "\tfollowing characteristics:\n\n");
+	(void) fprintf(el->el_outfile, "\tIt has %d columns and %d lines\n",
+	    Val(T_co), Val(T_li));
+	(void) fprintf(el->el_outfile,
+	    "\tIt has %s meta key\n", EL_HAS_META ? "a" : "no");
+	(void) fprintf(el->el_outfile,
+	    "\tIt can%suse tabs\n", EL_CAN_TAB ? " " : "not ");
+	(void) fprintf(el->el_outfile, "\tIt %s automatic margins\n",
+	    EL_HAS_AUTO_MARGINS ? "has" : "does not have");
+	if (EL_HAS_AUTO_MARGINS)
+		(void) fprintf(el->el_outfile, "\tIt %s magic margins\n",
+		    EL_HAS_MAGIC_MARGINS ? "has" : "does not have");
+
+	for (t = tstr, ts = el->el_terminal.t_str; t->name != NULL; t++, ts++) {
+		const char *ub;
+		if (*ts && **ts) {
+			ub = ct_encode_string(ct_visual_string(
+			    ct_decode_string(*ts, &el->el_scratch)),
+			    &el->el_scratch);
+		} else {
+			ub = "(empty)";
+		}
+		(void) fprintf(el->el_outfile, "\t%25s (%s) == %s\n",
+		    t->long_name, t->name, ub);
+	}
+	(void) fputc('\n', el->el_outfile);
+	return 0;
+}
+
+
+/* terminal_settc():
+ *	Change the current terminal characteristics
+ */
+protected int
+/*ARGSUSED*/
+terminal_settc(EditLine *el, int argc __attribute__((__unused__)),
+    const Char **argv)
+{
+	const struct termcapstr *ts;
+	const struct termcapval *tv;
+	char what[8], how[8];
+
+	if (argv == NULL || argv[1] == NULL || argv[2] == NULL)
+		return -1;
+
+	strncpy(what, ct_encode_string(argv[1], &el->el_scratch), sizeof(what));
+	what[sizeof(what) - 1] = '\0';
+	strncpy(how,  ct_encode_string(argv[2], &el->el_scratch), sizeof(how));
+	how[sizeof(how) - 1] = '\0';
+
+	/*
+         * Do the strings first
+         */
+	for (ts = tstr; ts->name != NULL; ts++)
+		if (strcmp(ts->name, what) == 0)
+			break;
+
+	if (ts->name != NULL) {
+		terminal_alloc(el, ts, how);
+		terminal_setflags(el);
+		return 0;
+	}
+	/*
+         * Do the numeric ones second
+         */
+	for (tv = tval; tv->name != NULL; tv++)
+		if (strcmp(tv->name, what) == 0)
+			break;
+
+	if (tv->name != NULL)
+		return -1;
+
+	if (tv == &tval[T_pt] || tv == &tval[T_km] ||
+	    tv == &tval[T_am] || tv == &tval[T_xn]) {
+		if (strcmp(how, "yes") == 0)
+			el->el_terminal.t_val[tv - tval] = 1;
+		else if (strcmp(how, "no") == 0)
+			el->el_terminal.t_val[tv - tval] = 0;
+		else {
+			(void) fprintf(el->el_errfile,
+			    "" FSTR ": Bad value `%s'.\n", argv[0], how);
+			return -1;
+		}
+		terminal_setflags(el);
+		if (terminal_change_size(el, Val(T_li), Val(T_co)) == -1)
+			return -1;
+		return 0;
+	} else {
+		long i;
+		char *ep;
+
+		i = strtol(how, &ep, 10);
+		if (*ep != '\0') {
+			(void) fprintf(el->el_errfile,
+			    "" FSTR ": Bad value `%s'.\n", argv[0], how);
+			return -1;
+		}
+		el->el_terminal.t_val[tv - tval] = (int) i;
+		el->el_terminal.t_size.v = Val(T_co);
+		el->el_terminal.t_size.h = Val(T_li);
+		if (tv == &tval[T_co] || tv == &tval[T_li])
+			if (terminal_change_size(el, Val(T_li), Val(T_co))
+			    == -1)
+				return -1;
+		return 0;
+	}
+}
+
+
+/* terminal_gettc():
+ *	Get the current terminal characteristics
+ */
+protected int
+/*ARGSUSED*/
+terminal_gettc(EditLine *el, int argc __attribute__((__unused__)), char **argv)
+{
+	const struct termcapstr *ts;
+	const struct termcapval *tv;
+	char *what;
+	void *how;
+
+	if (argv == NULL || argv[1] == NULL || argv[2] == NULL)
+		return -1;
+
+	what = argv[1];
+	how = argv[2];
+
+	/*
+         * Do the strings first
+         */
+	for (ts = tstr; ts->name != NULL; ts++)
+		if (strcmp(ts->name, what) == 0)
+			break;
+
+	if (ts->name != NULL) {
+		*(char **)how = el->el_terminal.t_str[ts - tstr];
+		return 0;
+	}
+	/*
+         * Do the numeric ones second
+         */
+	for (tv = tval; tv->name != NULL; tv++)
+		if (strcmp(tv->name, what) == 0)
+			break;
+
+	if (tv->name == NULL)
+		return -1;
+
+	if (tv == &tval[T_pt] || tv == &tval[T_km] ||
+	    tv == &tval[T_am] || tv == &tval[T_xn]) {
+		static char yes[] = "yes";
+		static char no[] = "no";
+		if (el->el_terminal.t_val[tv - tval])
+			*(char **)how = yes;
+		else
+			*(char **)how = no;
+		return 0;
+	} else {
+		*(int *)how = el->el_terminal.t_val[tv - tval];
+		return 0;
+	}
+}
+
+/* terminal_echotc():
+ *	Print the termcap string out with variable substitution
+ */
+protected int
+/*ARGSUSED*/
+terminal_echotc(EditLine *el, int argc __attribute__((__unused__)),
+    const Char **argv)
+{
+	char *cap, *scap;
+	Char *ep;
+	int arg_need, arg_cols, arg_rows;
+	int verbose = 0, silent = 0;
+	char *area;
+	static const char fmts[] = "%s\n", fmtd[] = "%d\n";
+	const struct termcapstr *t;
+	char buf[TC_BUFSIZE];
+	long i;
+
+	area = buf;
+
+	if (argv == NULL || argv[1] == NULL)
+		return -1;
+	argv++;
+
+	if (argv[0][0] == '-') {
+		switch (argv[0][1]) {
+		case 'v':
+			verbose = 1;
+			break;
+		case 's':
+			silent = 1;
+			break;
+		default:
+			/* stderror(ERR_NAME | ERR_TCUSAGE); */
+			break;
+		}
+		argv++;
+	}
+	if (!*argv || *argv[0] == '\0')
+		return 0;
+	if (Strcmp(*argv, STR("tabs")) == 0) {
+		(void) fprintf(el->el_outfile, fmts, EL_CAN_TAB ? "yes" : "no");
+		return 0;
+	} else if (Strcmp(*argv, STR("meta")) == 0) {
+		(void) fprintf(el->el_outfile, fmts, Val(T_km) ? "yes" : "no");
+		return 0;
+	} else if (Strcmp(*argv, STR("xn")) == 0) {
+		(void) fprintf(el->el_outfile, fmts, EL_HAS_MAGIC_MARGINS ?
+		    "yes" : "no");
+		return 0;
+	} else if (Strcmp(*argv, STR("am")) == 0) {
+		(void) fprintf(el->el_outfile, fmts, EL_HAS_AUTO_MARGINS ?
+		    "yes" : "no");
+		return 0;
+	} else if (Strcmp(*argv, STR("baud")) == 0) {
+		(void) fprintf(el->el_outfile, fmtd, (int)el->el_tty.t_speed);
+		return 0;
+	} else if (Strcmp(*argv, STR("rows")) == 0 ||
+                   Strcmp(*argv, STR("lines")) == 0) {
+		(void) fprintf(el->el_outfile, fmtd, Val(T_li));
+		return 0;
+	} else if (Strcmp(*argv, STR("cols")) == 0) {
+		(void) fprintf(el->el_outfile, fmtd, Val(T_co));
+		return 0;
+	}
+	/*
+         * Try to use our local definition first
+         */
+	scap = NULL;
+	for (t = tstr; t->name != NULL; t++)
+		if (strcmp(t->name,
+		    ct_encode_string(*argv, &el->el_scratch)) == 0) {
+			scap = el->el_terminal.t_str[t - tstr];
+			break;
+		}
+	if (t->name == NULL) {
+		/* XXX: some systems' tgetstr needs non const */
+                scap = tgetstr(ct_encode_string((Char*)*argv, &el->el_scratch), &area);
+	}
+	if (!scap || scap[0] == '\0') {
+		if (!silent)
+			(void) fprintf(el->el_errfile,
+			    "echotc: Termcap parameter `" FSTR "' not found.\n",
+			    *argv);
+		return -1;
+	}
+	/*
+         * Count home many values we need for this capability.
+         */
+	for (cap = scap, arg_need = 0; *cap; cap++)
+		if (*cap == '%')
+			switch (*++cap) {
+			case 'd':
+			case '2':
+			case '3':
+			case '.':
+			case '+':
+				arg_need++;
+				break;
+			case '%':
+			case '>':
+			case 'i':
+			case 'r':
+			case 'n':
+			case 'B':
+			case 'D':
+				break;
+			default:
+				/*
+				 * hpux has lot's of them...
+				 */
+				if (verbose)
+					(void) fprintf(el->el_errfile,
+				"echotc: Warning: unknown termcap %% `%c'.\n",
+					    *cap);
+				/* This is bad, but I won't complain */
+				break;
+			}
+
+	switch (arg_need) {
+	case 0:
+		argv++;
+		if (*argv && *argv[0]) {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Warning: Extra argument `" FSTR "'.\n",
+				    *argv);
+			return -1;
+		}
+		terminal_tputs(el, scap, 1);
+		break;
+	case 1:
+		argv++;
+		if (!*argv || *argv[0] == '\0') {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Warning: Missing argument.\n");
+			return -1;
+		}
+		arg_cols = 0;
+		i = Strtol(*argv, &ep, 10);
+		if (*ep != '\0' || i < 0) {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Bad value `" FSTR "' for rows.\n",
+				    *argv);
+			return -1;
+		}
+		arg_rows = (int) i;
+		argv++;
+		if (*argv && *argv[0]) {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Warning: Extra argument `" FSTR
+				    "'.\n", *argv);
+			return -1;
+		}
+		terminal_tputs(el, tgoto(scap, arg_cols, arg_rows), 1);
+		break;
+	default:
+		/* This is wrong, but I will ignore it... */
+		if (verbose)
+			(void) fprintf(el->el_errfile,
+			 "echotc: Warning: Too many required arguments (%d).\n",
+			    arg_need);
+		/* FALLTHROUGH */
+	case 2:
+		argv++;
+		if (!*argv || *argv[0] == '\0') {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Warning: Missing argument.\n");
+			return -1;
+		}
+		i = Strtol(*argv, &ep, 10);
+		if (*ep != '\0' || i < 0) {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Bad value `" FSTR "' for cols.\n",
+				    *argv);
+			return -1;
+		}
+		arg_cols = (int) i;
+		argv++;
+		if (!*argv || *argv[0] == '\0') {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Warning: Missing argument.\n");
+			return -1;
+		}
+		i = Strtol(*argv, &ep, 10);
+		if (*ep != '\0' || i < 0) {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Bad value `" FSTR "' for rows.\n",
+				    *argv);
+			return -1;
+		}
+		arg_rows = (int) i;
+		if (*ep != '\0') {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Bad value `" FSTR "'.\n", *argv);
+			return -1;
+		}
+		argv++;
+		if (*argv && *argv[0]) {
+			if (!silent)
+				(void) fprintf(el->el_errfile,
+				    "echotc: Warning: Extra argument `" FSTR
+				    "'.\n", *argv);
+			return -1;
+		}
+		terminal_tputs(el, tgoto(scap, arg_cols, arg_rows), arg_rows);
+		break;
+	}
+	return 0;
+}
diff --git a/src/terminal.h b/src/terminal.h
new file mode 100644
index 0000000..42122a7
--- /dev/null
+++ b/src/terminal.h
@@ -0,0 +1,135 @@
+/*	$NetBSD: terminal.h,v 1.4 2012/03/24 20:09:30 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)term.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.term.h: Termcap header
+ */
+#ifndef _h_el_terminal
+#define	_h_el_terminal
+
+#include "histedit.h"
+
+typedef struct {		/* Symbolic function key bindings	*/
+	const Char	*name;	/* name of the key			*/
+	int		 key;	/* Index in termcap table		*/
+	keymacro_value_t	 fun;	/* Function bound to it			*/
+	int		 type;	/* Type of function			*/
+} funckey_t;
+
+typedef struct {
+	const char *t_name;		/* the terminal name	*/
+	coord_t	  t_size;		/* # lines and cols	*/
+	int	  t_flags;
+#define	TERM_CAN_INSERT		0x001	/* Has insert cap	*/
+#define	TERM_CAN_DELETE		0x002	/* Has delete cap	*/
+#define	TERM_CAN_CEOL		0x004	/* Has CEOL cap		*/
+#define	TERM_CAN_TAB		0x008	/* Can use tabs		*/
+#define	TERM_CAN_ME		0x010	/* Can turn all attrs.	*/
+#define	TERM_CAN_UP		0x020	/* Can move up		*/
+#define	TERM_HAS_META		0x040	/* Has a meta key	*/
+#define	TERM_HAS_AUTO_MARGINS	0x080	/* Has auto margins	*/
+#define	TERM_HAS_MAGIC_MARGINS	0x100	/* Has magic margins	*/
+	char	 *t_buf;		/* Termcap buffer	*/
+	size_t	  t_loc;		/* location used	*/
+	char	**t_str;		/* termcap strings	*/
+	int	 *t_val;		/* termcap values	*/
+	char	 *t_cap;		/* Termcap buffer	*/
+	funckey_t	 *t_fkey;		/* Array of keys	*/
+} el_terminal_t;
+
+/*
+ * fKey indexes
+ */
+#define	A_K_DN		0
+#define	A_K_UP		1
+#define	A_K_LT		2
+#define	A_K_RT		3
+#define	A_K_HO		4
+#define	A_K_EN		5
+#define	A_K_DE		6
+#define	A_K_NKEYS	7
+
+#ifdef __sun
+extern int tgetent(char *, const char *);
+extern int tgetflag(char *);
+extern int tgetnum(char *);
+extern int tputs(const char *, int, int (*)(int));
+extern char* tgoto(const char*, int, int);
+extern char* tgetstr(char*, char**);
+#endif
+
+protected void	terminal_move_to_line(EditLine *, int);
+protected void	terminal_move_to_char(EditLine *, int);
+protected void	terminal_clear_EOL(EditLine *, int);
+protected void	terminal_overwrite(EditLine *, const Char *, size_t);
+protected void	terminal_insertwrite(EditLine *, Char *, int);
+protected void	terminal_deletechars(EditLine *, int);
+protected void	terminal_clear_screen(EditLine *);
+protected void	terminal_beep(EditLine *);
+protected int	terminal_change_size(EditLine *, int, int);
+protected int	terminal_get_size(EditLine *, int *, int *);
+protected int	terminal_init(EditLine *);
+protected void	terminal_bind_arrow(EditLine *);
+protected void	terminal_print_arrow(EditLine *, const Char *);
+protected int	terminal_clear_arrow(EditLine *, const Char *);
+protected int	terminal_set_arrow(EditLine *, const Char *, keymacro_value_t *, int);
+protected void	terminal_end(EditLine *);
+protected void	terminal_get(EditLine *, const char **);
+protected int	terminal_set(EditLine *, const char *);
+protected int	terminal_settc(EditLine *, int, const Char **);
+protected int	terminal_gettc(EditLine *, int, char **);
+protected int	terminal_telltc(EditLine *, int, const Char **);
+protected int	terminal_echotc(EditLine *, int, const Char **);
+protected void	terminal_writec(EditLine *, Int);
+protected int	terminal__putc(EditLine *, Int);
+protected void	terminal__flush(EditLine *);
+
+/*
+ * Easy access macros
+ */
+#define	EL_FLAGS	(el)->el_terminal.t_flags
+
+#define	EL_CAN_INSERT		(EL_FLAGS & TERM_CAN_INSERT)
+#define	EL_CAN_DELETE		(EL_FLAGS & TERM_CAN_DELETE)
+#define	EL_CAN_CEOL		(EL_FLAGS & TERM_CAN_CEOL)
+#define	EL_CAN_TAB		(EL_FLAGS & TERM_CAN_TAB)
+#define	EL_CAN_ME		(EL_FLAGS & TERM_CAN_ME)
+#define EL_CAN_UP		(EL_FLAGS & TERM_CAN_UP)
+#define	EL_HAS_META		(EL_FLAGS & TERM_HAS_META)
+#define	EL_HAS_AUTO_MARGINS	(EL_FLAGS & TERM_HAS_AUTO_MARGINS)
+#define	EL_HAS_MAGIC_MARGINS	(EL_FLAGS & TERM_HAS_MAGIC_MARGINS)
+
+#endif /* _h_el_terminal */
diff --git a/src/tokenizer.c b/src/tokenizer.c
new file mode 100644
index 0000000..5cb960d
--- /dev/null
+++ b/src/tokenizer.c
@@ -0,0 +1,453 @@
+/*	$NetBSD: tokenizer.c,v 1.21 2011/08/16 16:25:15 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef NARROWCHAR
+#include "config.h"
+#endif
+
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)tokenizer.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: tokenizer.c,v 1.21 2011/08/16 16:25:15 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/* We build this file twice, once as NARROW, once as WIDE. */
+/*
+ * tokenize.c: Bourne shell like tokenizer
+ */
+#include <string.h>
+#include <stdlib.h>
+#include "histedit.h"
+#include "chartype.h"
+
+typedef enum {
+	Q_none, Q_single, Q_double, Q_one, Q_doubleone
+} quote_t;
+
+#define	TOK_KEEP	1
+#define	TOK_EAT		2
+
+#define	WINCR		20
+#define	AINCR		10
+
+#define	IFS		STR("\t \n")
+
+#define	tok_malloc(a)		malloc(a)
+#define	tok_free(a)		free(a)
+#define	tok_realloc(a, b)	realloc(a, b)
+#define	tok_strdup(a)		Strdup(a)
+
+
+struct TYPE(tokenizer) {
+	Char	*ifs;		/* In field separator			 */
+	size_t	 argc, amax;	/* Current and maximum number of args	 */
+	Char   **argv;		/* Argument list			 */
+	Char	*wptr, *wmax;	/* Space and limit on the word buffer	 */
+	Char	*wstart;	/* Beginning of next word		 */
+	Char	*wspace;	/* Space of word buffer			 */
+	quote_t	 quote;		/* Quoting state			 */
+	int	 flags;		/* flags;				 */
+};
+
+
+private void FUN(tok,finish)(TYPE(Tokenizer) *);
+
+
+/* FUN(tok,finish)():
+ *	Finish a word in the tokenizer.
+ */
+private void
+FUN(tok,finish)(TYPE(Tokenizer) *tok)
+{
+
+	*tok->wptr = '\0';
+	if ((tok->flags & TOK_KEEP) || tok->wptr != tok->wstart) {
+		tok->argv[tok->argc++] = tok->wstart;
+		tok->argv[tok->argc] = NULL;
+		tok->wstart = ++tok->wptr;
+	}
+	tok->flags &= ~TOK_KEEP;
+}
+
+
+/* FUN(tok,init)():
+ *	Initialize the tokenizer
+ */
+public TYPE(Tokenizer) *
+FUN(tok,init)(const Char *ifs)
+{
+	TYPE(Tokenizer) *tok = tok_malloc(sizeof(*tok));
+
+	if (tok == NULL)
+		return NULL;
+	tok->ifs = tok_strdup(ifs ? ifs : IFS);
+	if (tok->ifs == NULL) {
+		tok_free(tok);
+		return NULL;
+	}
+	tok->argc = 0;
+	tok->amax = AINCR;
+	tok->argv = tok_malloc(sizeof(*tok->argv) * tok->amax);
+	if (tok->argv == NULL) {
+		tok_free(tok->ifs);
+		tok_free(tok);
+		return NULL;
+	}
+	tok->argv[0] = NULL;
+	tok->wspace = tok_malloc(WINCR * sizeof(*tok->wspace));
+	if (tok->wspace == NULL) {
+		tok_free(tok->argv);
+		tok_free(tok->ifs);
+		tok_free(tok);
+		return NULL;
+	}
+	tok->wmax = tok->wspace + WINCR;
+	tok->wstart = tok->wspace;
+	tok->wptr = tok->wspace;
+	tok->flags = 0;
+	tok->quote = Q_none;
+
+	return tok;
+}
+
+
+/* FUN(tok,reset)():
+ *	Reset the tokenizer
+ */
+public void
+FUN(tok,reset)(TYPE(Tokenizer) *tok)
+{
+
+	tok->argc = 0;
+	tok->wstart = tok->wspace;
+	tok->wptr = tok->wspace;
+	tok->flags = 0;
+	tok->quote = Q_none;
+}
+
+
+/* FUN(tok,end)():
+ *	Clean up
+ */
+public void
+FUN(tok,end)(TYPE(Tokenizer) *tok)
+{
+
+	tok_free(tok->ifs);
+	tok_free(tok->wspace);
+	tok_free(tok->argv);
+	tok_free(tok);
+}
+
+
+
+/* FUN(tok,line)():
+ *	Bourne shell (sh(1)) like tokenizing
+ *	Arguments:
+ *		tok	current tokenizer state (setup with FUN(tok,init)())
+ *		line	line to parse
+ *	Returns:
+ *		-1	Internal error
+ *		 3	Quoted return
+ *		 2	Unmatched double quote
+ *		 1	Unmatched single quote
+ *		 0	Ok
+ *	Modifies (if return value is 0):
+ *		argc	number of arguments
+ *		argv	argument array
+ *		cursorc	if !NULL, argv element containing cursor
+ *		cursorv	if !NULL, offset in argv[cursorc] of cursor
+ */
+public int
+FUN(tok,line)(TYPE(Tokenizer) *tok, const TYPE(LineInfo) *line,
+    int *argc, const Char ***argv, int *cursorc, int *cursoro)
+{
+	const Char *ptr;
+	int cc, co;
+
+	cc = co = -1;
+	ptr = line->buffer;
+	for (ptr = line->buffer; ;ptr++) {
+		if (ptr >= line->lastchar)
+			ptr = STR("");
+		if (ptr == line->cursor) {
+			cc = (int)tok->argc;
+			co = (int)(tok->wptr - tok->wstart);
+		}
+		switch (*ptr) {
+		case '\'':
+			tok->flags |= TOK_KEEP;
+			tok->flags &= ~TOK_EAT;
+			switch (tok->quote) {
+			case Q_none:
+				tok->quote = Q_single;	/* Enter single quote
+							 * mode */
+				break;
+
+			case Q_single:	/* Exit single quote mode */
+				tok->quote = Q_none;
+				break;
+
+			case Q_one:	/* Quote this ' */
+				tok->quote = Q_none;
+				*tok->wptr++ = *ptr;
+				break;
+
+			case Q_double:	/* Stay in double quote mode */
+				*tok->wptr++ = *ptr;
+				break;
+
+			case Q_doubleone:	/* Quote this ' */
+				tok->quote = Q_double;
+				*tok->wptr++ = *ptr;
+				break;
+
+			default:
+				return -1;
+			}
+			break;
+
+		case '"':
+			tok->flags &= ~TOK_EAT;
+			tok->flags |= TOK_KEEP;
+			switch (tok->quote) {
+			case Q_none:	/* Enter double quote mode */
+				tok->quote = Q_double;
+				break;
+
+			case Q_double:	/* Exit double quote mode */
+				tok->quote = Q_none;
+				break;
+
+			case Q_one:	/* Quote this " */
+				tok->quote = Q_none;
+				*tok->wptr++ = *ptr;
+				break;
+
+			case Q_single:	/* Stay in single quote mode */
+				*tok->wptr++ = *ptr;
+				break;
+
+			case Q_doubleone:	/* Quote this " */
+				tok->quote = Q_double;
+				*tok->wptr++ = *ptr;
+				break;
+
+			default:
+				return -1;
+			}
+			break;
+
+		case '\\':
+			tok->flags |= TOK_KEEP;
+			tok->flags &= ~TOK_EAT;
+			switch (tok->quote) {
+			case Q_none:	/* Quote next character */
+				tok->quote = Q_one;
+				break;
+
+			case Q_double:	/* Quote next character */
+				tok->quote = Q_doubleone;
+				break;
+
+			case Q_one:	/* Quote this, restore state */
+				*tok->wptr++ = *ptr;
+				tok->quote = Q_none;
+				break;
+
+			case Q_single:	/* Stay in single quote mode */
+				*tok->wptr++ = *ptr;
+				break;
+
+			case Q_doubleone:	/* Quote this \ */
+				tok->quote = Q_double;
+				*tok->wptr++ = *ptr;
+				break;
+
+			default:
+				return -1;
+			}
+			break;
+
+		case '\n':
+			tok->flags &= ~TOK_EAT;
+			switch (tok->quote) {
+			case Q_none:
+				goto tok_line_outok;
+
+			case Q_single:
+			case Q_double:
+				*tok->wptr++ = *ptr;	/* Add the return */
+				break;
+
+			case Q_doubleone:   /* Back to double, eat the '\n' */
+				tok->flags |= TOK_EAT;
+				tok->quote = Q_double;
+				break;
+
+			case Q_one:	/* No quote, more eat the '\n' */
+				tok->flags |= TOK_EAT;
+				tok->quote = Q_none;
+				break;
+
+			default:
+				return 0;
+			}
+			break;
+
+		case '\0':
+			switch (tok->quote) {
+			case Q_none:
+				/* Finish word and return */
+				if (tok->flags & TOK_EAT) {
+					tok->flags &= ~TOK_EAT;
+					return 3;
+				}
+				goto tok_line_outok;
+
+			case Q_single:
+				return 1;
+
+			case Q_double:
+				return 2;
+
+			case Q_doubleone:
+				tok->quote = Q_double;
+				*tok->wptr++ = *ptr;
+				break;
+
+			case Q_one:
+				tok->quote = Q_none;
+				*tok->wptr++ = *ptr;
+				break;
+
+			default:
+				return -1;
+			}
+			break;
+
+		default:
+			tok->flags &= ~TOK_EAT;
+			switch (tok->quote) {
+			case Q_none:
+				if (Strchr(tok->ifs, *ptr) != NULL)
+					FUN(tok,finish)(tok);
+				else
+					*tok->wptr++ = *ptr;
+				break;
+
+			case Q_single:
+			case Q_double:
+				*tok->wptr++ = *ptr;
+				break;
+
+
+			case Q_doubleone:
+				*tok->wptr++ = '\\';
+				tok->quote = Q_double;
+				*tok->wptr++ = *ptr;
+				break;
+
+			case Q_one:
+				tok->quote = Q_none;
+				*tok->wptr++ = *ptr;
+				break;
+
+			default:
+				return -1;
+
+			}
+			break;
+		}
+
+		if (tok->wptr >= tok->wmax - 4) {
+			size_t size = (size_t)(tok->wmax - tok->wspace + WINCR);
+			Char *s = tok_realloc(tok->wspace,
+			    size * sizeof(*s));
+			if (s == NULL)
+				return -1;
+
+			if (s != tok->wspace) {
+				size_t i;
+				for (i = 0; i < tok->argc; i++) {
+				    tok->argv[i] =
+					(tok->argv[i] - tok->wspace) + s;
+				}
+				tok->wptr = (tok->wptr - tok->wspace) + s;
+				tok->wstart = (tok->wstart - tok->wspace) + s;
+				tok->wspace = s;
+			}
+			tok->wmax = s + size;
+		}
+		if (tok->argc >= tok->amax - 4) {
+			Char **p;
+			tok->amax += AINCR;
+			p = tok_realloc(tok->argv, tok->amax * sizeof(*p));
+			if (p == NULL)
+				return -1;
+			tok->argv = p;
+		}
+	}
+ tok_line_outok:
+	if (cc == -1 && co == -1) {
+		cc = (int)tok->argc;
+		co = (int)(tok->wptr - tok->wstart);
+	}
+	if (cursorc != NULL)
+		*cursorc = cc;
+	if (cursoro != NULL)
+		*cursoro = co;
+	FUN(tok,finish)(tok);
+	*argv = (const Char **)tok->argv;
+	*argc = (int)tok->argc;
+	return 0;
+}
+
+/* FUN(tok,str)():
+ *	Simpler version of tok_line, taking a NUL terminated line
+ *	and splitting into words, ignoring cursor state.
+ */
+public int
+FUN(tok,str)(TYPE(Tokenizer) *tok, const Char *line, int *argc,
+    const Char ***argv)
+{
+	TYPE(LineInfo) li;
+
+	memset(&li, 0, sizeof(li));
+	li.buffer = line;
+	li.cursor = li.lastchar = Strchr(line, '\0');
+	return FUN(tok,line(tok, &li, argc, argv, NULL, NULL));
+}
diff --git a/src/tty.c b/src/tty.c
new file mode 100644
index 0000000..57c8ee8
--- /dev/null
+++ b/src/tty.c
@@ -0,0 +1,1359 @@
+/*	$NetBSD: tty.c,v 1.42 2012/05/15 15:59:01 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)tty.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: tty.c,v 1.42 2012/05/15 15:59:01 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * tty.c: tty interface stuff
+ */
+#include <assert.h>
+#include <errno.h>
+#include <unistd.h>	/* for isatty */
+#include <strings.h>	/* for ffs */
+#include "el.h"
+#include "tty.h"
+
+typedef struct ttymodes_t {
+	const char *m_name;
+	unsigned int m_value;
+	int m_type;
+}          ttymodes_t;
+
+typedef struct ttymap_t {
+	Int nch, och;		/* Internal and termio rep of chars */
+	el_action_t bind[3];	/* emacs, vi, and vi-cmd */
+} ttymap_t;
+
+
+private const ttyperm_t ttyperm = {
+	{
+		{"iflag:", ICRNL, (INLCR | IGNCR)},
+		{"oflag:", (OPOST | ONLCR), ONLRET},
+		{"cflag:", 0, 0},
+		{"lflag:", (ISIG | ICANON | ECHO | ECHOE | ECHOCTL | IEXTEN),
+		(NOFLSH | ECHONL | EXTPROC | FLUSHO)},
+		{"chars:", 0, 0},
+	},
+	{
+		{"iflag:", (INLCR | ICRNL), IGNCR},
+		{"oflag:", (OPOST | ONLCR), ONLRET},
+		{"cflag:", 0, 0},
+		{"lflag:", ISIG,
+		(NOFLSH | ICANON | ECHO | ECHOK | ECHONL | EXTPROC | IEXTEN | FLUSHO)},
+		{"chars:", (C_SH(C_MIN) | C_SH(C_TIME) | C_SH(C_SWTCH) | C_SH(C_DSWTCH) |
+			    C_SH(C_SUSP) | C_SH(C_DSUSP) | C_SH(C_EOL) | C_SH(C_DISCARD) |
+		    C_SH(C_PGOFF) | C_SH(C_PAGE) | C_SH(C_STATUS)), 0}
+	},
+	{
+		{"iflag:", 0, IXON | IXOFF | INLCR | ICRNL},
+		{"oflag:", 0, 0},
+		{"cflag:", 0, 0},
+		{"lflag:", 0, ISIG | IEXTEN},
+		{"chars:", 0, 0},
+	}
+};
+
+private const ttychar_t ttychar = {
+	{
+		CINTR, CQUIT, CERASE, CKILL,
+		CEOF, CEOL, CEOL2, CSWTCH,
+		CDSWTCH, CERASE2, CSTART, CSTOP,
+		CWERASE, CSUSP, CDSUSP, CREPRINT,
+		CDISCARD, CLNEXT, CSTATUS, CPAGE,
+		CPGOFF, CKILL2, CBRK, CMIN,
+		CTIME
+	},
+	{
+		CINTR, CQUIT, CERASE, CKILL,
+		_POSIX_VDISABLE, _POSIX_VDISABLE, _POSIX_VDISABLE, _POSIX_VDISABLE,
+		_POSIX_VDISABLE, CERASE2, CSTART, CSTOP,
+		_POSIX_VDISABLE, CSUSP, _POSIX_VDISABLE, _POSIX_VDISABLE,
+		CDISCARD, _POSIX_VDISABLE, _POSIX_VDISABLE, _POSIX_VDISABLE,
+		_POSIX_VDISABLE, _POSIX_VDISABLE, _POSIX_VDISABLE, 1,
+		0
+	},
+	{
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0, 0, 0, 0,
+		0
+	}
+};
+
+private const ttymap_t tty_map[] = {
+#ifdef VERASE
+	{C_ERASE, VERASE,
+	{EM_DELETE_PREV_CHAR, VI_DELETE_PREV_CHAR, ED_PREV_CHAR}},
+#endif /* VERASE */
+#ifdef VERASE2
+	{C_ERASE2, VERASE2,
+	{EM_DELETE_PREV_CHAR, VI_DELETE_PREV_CHAR, ED_PREV_CHAR}},
+#endif /* VERASE2 */
+#ifdef VKILL
+	{C_KILL, VKILL,
+	{EM_KILL_LINE, VI_KILL_LINE_PREV, ED_UNASSIGNED}},
+#endif /* VKILL */
+#ifdef VKILL2
+	{C_KILL2, VKILL2,
+	{EM_KILL_LINE, VI_KILL_LINE_PREV, ED_UNASSIGNED}},
+#endif /* VKILL2 */
+#ifdef VEOF
+	{C_EOF, VEOF,
+	{EM_DELETE_OR_LIST, VI_LIST_OR_EOF, ED_UNASSIGNED}},
+#endif /* VEOF */
+#ifdef VWERASE
+	{C_WERASE, VWERASE,
+	{ED_DELETE_PREV_WORD, ED_DELETE_PREV_WORD, ED_PREV_WORD}},
+#endif /* VWERASE */
+#ifdef VREPRINT
+	{C_REPRINT, VREPRINT,
+	{ED_REDISPLAY, ED_INSERT, ED_REDISPLAY}},
+#endif /* VREPRINT */
+#ifdef VLNEXT
+	{C_LNEXT, VLNEXT,
+	{ED_QUOTED_INSERT, ED_QUOTED_INSERT, ED_UNASSIGNED}},
+#endif /* VLNEXT */
+	{(Int)-1, (Int)-1,
+	{ED_UNASSIGNED, ED_UNASSIGNED, ED_UNASSIGNED}}
+};
+
+private const ttymodes_t ttymodes[] = {
+#ifdef	IGNBRK
+	{"ignbrk", IGNBRK, MD_INP},
+#endif /* IGNBRK */
+#ifdef	BRKINT
+	{"brkint", BRKINT, MD_INP},
+#endif /* BRKINT */
+#ifdef	IGNPAR
+	{"ignpar", IGNPAR, MD_INP},
+#endif /* IGNPAR */
+#ifdef	PARMRK
+	{"parmrk", PARMRK, MD_INP},
+#endif /* PARMRK */
+#ifdef	INPCK
+	{"inpck", INPCK, MD_INP},
+#endif /* INPCK */
+#ifdef	ISTRIP
+	{"istrip", ISTRIP, MD_INP},
+#endif /* ISTRIP */
+#ifdef	INLCR
+	{"inlcr", INLCR, MD_INP},
+#endif /* INLCR */
+#ifdef	IGNCR
+	{"igncr", IGNCR, MD_INP},
+#endif /* IGNCR */
+#ifdef	ICRNL
+	{"icrnl", ICRNL, MD_INP},
+#endif /* ICRNL */
+#ifdef	IUCLC
+	{"iuclc", IUCLC, MD_INP},
+#endif /* IUCLC */
+#ifdef	IXON
+	{"ixon", IXON, MD_INP},
+#endif /* IXON */
+#ifdef	IXANY
+	{"ixany", IXANY, MD_INP},
+#endif /* IXANY */
+#ifdef	IXOFF
+	{"ixoff", IXOFF, MD_INP},
+#endif /* IXOFF */
+#ifdef  IMAXBEL
+	{"imaxbel", IMAXBEL, MD_INP},
+#endif /* IMAXBEL */
+
+#ifdef	OPOST
+	{"opost", OPOST, MD_OUT},
+#endif /* OPOST */
+#ifdef	OLCUC
+	{"olcuc", OLCUC, MD_OUT},
+#endif /* OLCUC */
+#ifdef	ONLCR
+	{"onlcr", ONLCR, MD_OUT},
+#endif /* ONLCR */
+#ifdef	OCRNL
+	{"ocrnl", OCRNL, MD_OUT},
+#endif /* OCRNL */
+#ifdef	ONOCR
+	{"onocr", ONOCR, MD_OUT},
+#endif /* ONOCR */
+#ifdef ONOEOT
+	{"onoeot", ONOEOT, MD_OUT},
+#endif /* ONOEOT */
+#ifdef	ONLRET
+	{"onlret", ONLRET, MD_OUT},
+#endif /* ONLRET */
+#ifdef	OFILL
+	{"ofill", OFILL, MD_OUT},
+#endif /* OFILL */
+#ifdef	OFDEL
+	{"ofdel", OFDEL, MD_OUT},
+#endif /* OFDEL */
+#ifdef	NLDLY
+	{"nldly", NLDLY, MD_OUT},
+#endif /* NLDLY */
+#ifdef	CRDLY
+	{"crdly", CRDLY, MD_OUT},
+#endif /* CRDLY */
+#ifdef	TABDLY
+	{"tabdly", TABDLY, MD_OUT},
+#endif /* TABDLY */
+#ifdef	XTABS
+	{"xtabs", XTABS, MD_OUT},
+#endif /* XTABS */
+#ifdef	BSDLY
+	{"bsdly", BSDLY, MD_OUT},
+#endif /* BSDLY */
+#ifdef	VTDLY
+	{"vtdly", VTDLY, MD_OUT},
+#endif /* VTDLY */
+#ifdef	FFDLY
+	{"ffdly", FFDLY, MD_OUT},
+#endif /* FFDLY */
+#ifdef	PAGEOUT
+	{"pageout", PAGEOUT, MD_OUT},
+#endif /* PAGEOUT */
+#ifdef	WRAP
+	{"wrap", WRAP, MD_OUT},
+#endif /* WRAP */
+
+#ifdef	CIGNORE
+	{"cignore", CIGNORE, MD_CTL},
+#endif /* CBAUD */
+#ifdef	CBAUD
+	{"cbaud", CBAUD, MD_CTL},
+#endif /* CBAUD */
+#ifdef	CSTOPB
+	{"cstopb", CSTOPB, MD_CTL},
+#endif /* CSTOPB */
+#ifdef	CREAD
+	{"cread", CREAD, MD_CTL},
+#endif /* CREAD */
+#ifdef	PARENB
+	{"parenb", PARENB, MD_CTL},
+#endif /* PARENB */
+#ifdef	PARODD
+	{"parodd", PARODD, MD_CTL},
+#endif /* PARODD */
+#ifdef	HUPCL
+	{"hupcl", HUPCL, MD_CTL},
+#endif /* HUPCL */
+#ifdef	CLOCAL
+	{"clocal", CLOCAL, MD_CTL},
+#endif /* CLOCAL */
+#ifdef	LOBLK
+	{"loblk", LOBLK, MD_CTL},
+#endif /* LOBLK */
+#ifdef	CIBAUD
+	{"cibaud", CIBAUD, MD_CTL},
+#endif /* CIBAUD */
+#ifdef CRTSCTS
+#ifdef CCTS_OFLOW
+	{"ccts_oflow", CCTS_OFLOW, MD_CTL},
+#else
+	{"crtscts", CRTSCTS, MD_CTL},
+#endif /* CCTS_OFLOW */
+#endif /* CRTSCTS */
+#ifdef CRTS_IFLOW
+	{"crts_iflow", CRTS_IFLOW, MD_CTL},
+#endif /* CRTS_IFLOW */
+#ifdef CDTRCTS
+	{"cdtrcts", CDTRCTS, MD_CTL},
+#endif /* CDTRCTS */
+#ifdef MDMBUF
+	{"mdmbuf", MDMBUF, MD_CTL},
+#endif /* MDMBUF */
+#ifdef RCV1EN
+	{"rcv1en", RCV1EN, MD_CTL},
+#endif /* RCV1EN */
+#ifdef XMT1EN
+	{"xmt1en", XMT1EN, MD_CTL},
+#endif /* XMT1EN */
+
+#ifdef	ISIG
+	{"isig", ISIG, MD_LIN},
+#endif /* ISIG */
+#ifdef	ICANON
+	{"icanon", ICANON, MD_LIN},
+#endif /* ICANON */
+#ifdef	XCASE
+	{"xcase", XCASE, MD_LIN},
+#endif /* XCASE */
+#ifdef	ECHO
+	{"echo", ECHO, MD_LIN},
+#endif /* ECHO */
+#ifdef	ECHOE
+	{"echoe", ECHOE, MD_LIN},
+#endif /* ECHOE */
+#ifdef	ECHOK
+	{"echok", ECHOK, MD_LIN},
+#endif /* ECHOK */
+#ifdef	ECHONL
+	{"echonl", ECHONL, MD_LIN},
+#endif /* ECHONL */
+#ifdef	NOFLSH
+	{"noflsh", NOFLSH, MD_LIN},
+#endif /* NOFLSH */
+#ifdef	TOSTOP
+	{"tostop", TOSTOP, MD_LIN},
+#endif /* TOSTOP */
+#ifdef	ECHOCTL
+	{"echoctl", ECHOCTL, MD_LIN},
+#endif /* ECHOCTL */
+#ifdef	ECHOPRT
+	{"echoprt", ECHOPRT, MD_LIN},
+#endif /* ECHOPRT */
+#ifdef	ECHOKE
+	{"echoke", ECHOKE, MD_LIN},
+#endif /* ECHOKE */
+#ifdef	DEFECHO
+	{"defecho", DEFECHO, MD_LIN},
+#endif /* DEFECHO */
+#ifdef	FLUSHO
+	{"flusho", FLUSHO, MD_LIN},
+#endif /* FLUSHO */
+#ifdef	PENDIN
+	{"pendin", PENDIN, MD_LIN},
+#endif /* PENDIN */
+#ifdef	IEXTEN
+	{"iexten", IEXTEN, MD_LIN},
+#endif /* IEXTEN */
+#ifdef	NOKERNINFO
+	{"nokerninfo", NOKERNINFO, MD_LIN},
+#endif /* NOKERNINFO */
+#ifdef	ALTWERASE
+	{"altwerase", ALTWERASE, MD_LIN},
+#endif /* ALTWERASE */
+#ifdef	EXTPROC
+	{"extproc", EXTPROC, MD_LIN},
+#endif /* EXTPROC */
+
+#if defined(VINTR)
+	{"intr", C_SH(C_INTR), MD_CHAR},
+#endif /* VINTR */
+#if defined(VQUIT)
+	{"quit", C_SH(C_QUIT), MD_CHAR},
+#endif /* VQUIT */
+#if defined(VERASE)
+	{"erase", C_SH(C_ERASE), MD_CHAR},
+#endif /* VERASE */
+#if defined(VKILL)
+	{"kill", C_SH(C_KILL), MD_CHAR},
+#endif /* VKILL */
+#if defined(VEOF)
+	{"eof", C_SH(C_EOF), MD_CHAR},
+#endif /* VEOF */
+#if defined(VEOL)
+	{"eol", C_SH(C_EOL), MD_CHAR},
+#endif /* VEOL */
+#if defined(VEOL2)
+	{"eol2", C_SH(C_EOL2), MD_CHAR},
+#endif /* VEOL2 */
+#if defined(VSWTCH)
+	{"swtch", C_SH(C_SWTCH), MD_CHAR},
+#endif /* VSWTCH */
+#if defined(VDSWTCH)
+	{"dswtch", C_SH(C_DSWTCH), MD_CHAR},
+#endif /* VDSWTCH */
+#if defined(VERASE2)
+	{"erase2", C_SH(C_ERASE2), MD_CHAR},
+#endif /* VERASE2 */
+#if defined(VSTART)
+	{"start", C_SH(C_START), MD_CHAR},
+#endif /* VSTART */
+#if defined(VSTOP)
+	{"stop", C_SH(C_STOP), MD_CHAR},
+#endif /* VSTOP */
+#if defined(VWERASE)
+	{"werase", C_SH(C_WERASE), MD_CHAR},
+#endif /* VWERASE */
+#if defined(VSUSP)
+	{"susp", C_SH(C_SUSP), MD_CHAR},
+#endif /* VSUSP */
+#if defined(VDSUSP)
+	{"dsusp", C_SH(C_DSUSP), MD_CHAR},
+#endif /* VDSUSP */
+#if defined(VREPRINT)
+	{"reprint", C_SH(C_REPRINT), MD_CHAR},
+#endif /* VREPRINT */
+#if defined(VDISCARD)
+	{"discard", C_SH(C_DISCARD), MD_CHAR},
+#endif /* VDISCARD */
+#if defined(VLNEXT)
+	{"lnext", C_SH(C_LNEXT), MD_CHAR},
+#endif /* VLNEXT */
+#if defined(VSTATUS)
+	{"status", C_SH(C_STATUS), MD_CHAR},
+#endif /* VSTATUS */
+#if defined(VPAGE)
+	{"page", C_SH(C_PAGE), MD_CHAR},
+#endif /* VPAGE */
+#if defined(VPGOFF)
+	{"pgoff", C_SH(C_PGOFF), MD_CHAR},
+#endif /* VPGOFF */
+#if defined(VKILL2)
+	{"kill2", C_SH(C_KILL2), MD_CHAR},
+#endif /* VKILL2 */
+#if defined(VBRK)
+	{"brk", C_SH(C_BRK), MD_CHAR},
+#endif /* VBRK */
+#if defined(VMIN)
+	{"min", C_SH(C_MIN), MD_CHAR},
+#endif /* VMIN */
+#if defined(VTIME)
+	{"time", C_SH(C_TIME), MD_CHAR},
+#endif /* VTIME */
+	{NULL, 0, -1},
+};
+
+
+
+#define	tty__gettabs(td)	((((td)->c_oflag & TAB3) == TAB3) ? 0 : 1)
+#define	tty__geteightbit(td)	(((td)->c_cflag & CSIZE) == CS8)
+#define	tty__cooked_mode(td)	((td)->c_lflag & ICANON)
+
+private int	tty_getty(EditLine *, struct termios *);
+private int	tty_setty(EditLine *, int, const struct termios *);
+private int	tty__getcharindex(int);
+private void	tty__getchar(struct termios *, unsigned char *);
+private void	tty__setchar(struct termios *, unsigned char *);
+private speed_t	tty__getspeed(struct termios *);
+private int	tty_setup(EditLine *);
+
+#define	t_qu	t_ts
+
+/* tty_getty():
+ *	Wrapper for tcgetattr to handle EINTR
+ */
+private int
+tty_getty(EditLine *el, struct termios *t)
+{
+	int rv;
+	while ((rv = tcgetattr(el->el_infd, t)) == -1 && errno == EINTR)
+		continue;
+	return rv;
+}
+
+/* tty_setty():
+ *	Wrapper for tcsetattr to handle EINTR
+ */
+private int
+tty_setty(EditLine *el, int action, const struct termios *t)
+{
+	int rv;
+	while ((rv = tcsetattr(el->el_infd, action, t)) == -1 && errno == EINTR)
+		continue;
+	return rv;
+}
+
+/* tty_setup():
+ *	Get the tty parameters and initialize the editing state
+ */
+private int
+tty_setup(EditLine *el)
+{
+	int rst = 1;
+
+	if (el->el_flags & EDIT_DISABLED)
+		return 0;
+
+	if (!isatty(el->el_outfd)) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile, "%s: isatty: %s\n", __func__,
+		    strerror(errno));
+#endif /* DEBUG_TTY */
+		return -1;
+	}
+	if (tty_getty(el, &el->el_tty.t_or) == -1) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile, "%s: tty_getty: %s\n", __func__,
+		    strerror(errno));
+#endif /* DEBUG_TTY */
+		return -1;
+	}
+	el->el_tty.t_ts = el->el_tty.t_ex = el->el_tty.t_ed = el->el_tty.t_or;
+
+	el->el_tty.t_speed = tty__getspeed(&el->el_tty.t_ex);
+	el->el_tty.t_tabs = tty__gettabs(&el->el_tty.t_ex);
+	el->el_tty.t_eight = tty__geteightbit(&el->el_tty.t_ex);
+
+	el->el_tty.t_ex.c_iflag &= ~el->el_tty.t_t[EX_IO][MD_INP].t_clrmask;
+	el->el_tty.t_ex.c_iflag |= el->el_tty.t_t[EX_IO][MD_INP].t_setmask;
+
+	el->el_tty.t_ex.c_oflag &= ~el->el_tty.t_t[EX_IO][MD_OUT].t_clrmask;
+	el->el_tty.t_ex.c_oflag |= el->el_tty.t_t[EX_IO][MD_OUT].t_setmask;
+
+	el->el_tty.t_ex.c_cflag &= ~el->el_tty.t_t[EX_IO][MD_CTL].t_clrmask;
+	el->el_tty.t_ex.c_cflag |= el->el_tty.t_t[EX_IO][MD_CTL].t_setmask;
+
+	el->el_tty.t_ex.c_lflag &= ~el->el_tty.t_t[EX_IO][MD_LIN].t_clrmask;
+	el->el_tty.t_ex.c_lflag |= el->el_tty.t_t[EX_IO][MD_LIN].t_setmask;
+
+	/*
+         * Reset the tty chars to reasonable defaults
+         * If they are disabled, then enable them.
+         */
+	if (rst) {
+		if (tty__cooked_mode(&el->el_tty.t_ts)) {
+			tty__getchar(&el->el_tty.t_ts, el->el_tty.t_c[TS_IO]);
+			/*
+	                 * Don't affect CMIN and CTIME for the editor mode
+	                 */
+			for (rst = 0; rst < C_NCC - 2; rst++)
+				if (el->el_tty.t_c[TS_IO][rst] !=
+				      el->el_tty.t_vdisable
+				    && el->el_tty.t_c[ED_IO][rst] !=
+				      el->el_tty.t_vdisable)
+					el->el_tty.t_c[ED_IO][rst] =
+					    el->el_tty.t_c[TS_IO][rst];
+			for (rst = 0; rst < C_NCC; rst++)
+				if (el->el_tty.t_c[TS_IO][rst] !=
+				    el->el_tty.t_vdisable)
+					el->el_tty.t_c[EX_IO][rst] =
+					    el->el_tty.t_c[TS_IO][rst];
+		}
+		tty__setchar(&el->el_tty.t_ex, el->el_tty.t_c[EX_IO]);
+		if (tty_setty(el, TCSADRAIN, &el->el_tty.t_ex) == -1) {
+#ifdef DEBUG_TTY
+			(void) fprintf(el->el_errfile, "%s: tty_setty: %s\n",
+			    __func__, strerror(errno));
+#endif /* DEBUG_TTY */
+			return -1;
+		}
+	}
+
+	el->el_tty.t_ed.c_iflag &= ~el->el_tty.t_t[ED_IO][MD_INP].t_clrmask;
+	el->el_tty.t_ed.c_iflag |= el->el_tty.t_t[ED_IO][MD_INP].t_setmask;
+
+	el->el_tty.t_ed.c_oflag &= ~el->el_tty.t_t[ED_IO][MD_OUT].t_clrmask;
+	el->el_tty.t_ed.c_oflag |= el->el_tty.t_t[ED_IO][MD_OUT].t_setmask;
+
+	el->el_tty.t_ed.c_cflag &= ~el->el_tty.t_t[ED_IO][MD_CTL].t_clrmask;
+	el->el_tty.t_ed.c_cflag |= el->el_tty.t_t[ED_IO][MD_CTL].t_setmask;
+
+	el->el_tty.t_ed.c_lflag &= ~el->el_tty.t_t[ED_IO][MD_LIN].t_clrmask;
+	el->el_tty.t_ed.c_lflag |= el->el_tty.t_t[ED_IO][MD_LIN].t_setmask;
+
+	tty__setchar(&el->el_tty.t_ed, el->el_tty.t_c[ED_IO]);
+	tty_bind_char(el, 1);
+	return 0;
+}
+
+protected int
+tty_init(EditLine *el)
+{
+
+	el->el_tty.t_mode = EX_IO;
+	el->el_tty.t_vdisable = _POSIX_VDISABLE;
+	(void) memcpy(el->el_tty.t_t, ttyperm, sizeof(ttyperm_t));
+	(void) memcpy(el->el_tty.t_c, ttychar, sizeof(ttychar_t));
+	return tty_setup(el);
+}
+
+
+/* tty_end():
+ *	Restore the tty to its original settings
+ */
+protected void
+/*ARGSUSED*/
+tty_end(EditLine *el)
+{
+	if (tty_setty(el, TCSAFLUSH, &el->el_tty.t_or) == -1) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile,
+		    "%s: tty_setty: %s\n", __func__, strerror(errno));
+#endif /* DEBUG_TTY */
+	}
+}
+
+
+/* tty__getspeed():
+ *	Get the tty speed
+ */
+private speed_t
+tty__getspeed(struct termios *td)
+{
+	speed_t spd;
+
+	if ((spd = cfgetispeed(td)) == 0)
+		spd = cfgetospeed(td);
+	return spd;
+}
+
+/* tty__getspeed():
+ *	Return the index of the asked char in the c_cc array
+ */
+private int
+tty__getcharindex(int i)
+{
+	switch (i) {
+#ifdef VINTR
+	case C_INTR:
+		return VINTR;
+#endif /* VINTR */
+#ifdef VQUIT
+	case C_QUIT:
+		return VQUIT;
+#endif /* VQUIT */
+#ifdef VERASE
+	case C_ERASE:
+		return VERASE;
+#endif /* VERASE */
+#ifdef VKILL
+	case C_KILL:
+		return VKILL;
+#endif /* VKILL */
+#ifdef VEOF
+	case C_EOF:
+		return VEOF;
+#endif /* VEOF */
+#ifdef VEOL
+	case C_EOL:
+		return VEOL;
+#endif /* VEOL */
+#ifdef VEOL2
+	case C_EOL2:
+		return VEOL2;
+#endif /* VEOL2 */
+#ifdef VSWTCH
+	case C_SWTCH:
+		return VSWTCH;
+#endif /* VSWTCH */
+#ifdef VDSWTCH
+	case C_DSWTCH:
+		return VDSWTCH;
+#endif /* VDSWTCH */
+#ifdef VERASE2
+	case C_ERASE2:
+		return VERASE2;
+#endif /* VERASE2 */
+#ifdef VSTART
+	case C_START:
+		return VSTART;
+#endif /* VSTART */
+#ifdef VSTOP
+	case C_STOP:
+		return VSTOP;
+#endif /* VSTOP */
+#ifdef VWERASE
+	case C_WERASE:
+		return VWERASE;
+#endif /* VWERASE */
+#ifdef VSUSP
+	case C_SUSP:
+		return VSUSP;
+#endif /* VSUSP */
+#ifdef VDSUSP
+	case C_DSUSP:
+		return VDSUSP;
+#endif /* VDSUSP */
+#ifdef VREPRINT
+	case C_REPRINT:
+		return VREPRINT;
+#endif /* VREPRINT */
+#ifdef VDISCARD
+	case C_DISCARD:
+		return VDISCARD;
+#endif /* VDISCARD */
+#ifdef VLNEXT
+	case C_LNEXT:
+		return VLNEXT;
+#endif /* VLNEXT */
+#ifdef VSTATUS
+	case C_STATUS:
+		return VSTATUS;
+#endif /* VSTATUS */
+#ifdef VPAGE
+	case C_PAGE:
+		return VPAGE;
+#endif /* VPAGE */
+#ifdef VPGOFF
+	case C_PGOFF:
+		return VPGOFF;
+#endif /* VPGOFF */
+#ifdef VKILL2
+	case C_KILL2:
+		return VKILL2;
+#endif /* KILL2 */
+#ifdef VMIN
+	case C_MIN:
+		return VMIN;
+#endif /* VMIN */
+#ifdef VTIME
+	case C_TIME:
+		return VTIME;
+#endif /* VTIME */
+	default:
+		return -1;
+	}
+}
+
+/* tty__getchar():
+ *	Get the tty characters
+ */
+private void
+tty__getchar(struct termios *td, unsigned char *s)
+{
+
+#ifdef VINTR
+	s[C_INTR] = td->c_cc[VINTR];
+#endif /* VINTR */
+#ifdef VQUIT
+	s[C_QUIT] = td->c_cc[VQUIT];
+#endif /* VQUIT */
+#ifdef VERASE
+	s[C_ERASE] = td->c_cc[VERASE];
+#endif /* VERASE */
+#ifdef VKILL
+	s[C_KILL] = td->c_cc[VKILL];
+#endif /* VKILL */
+#ifdef VEOF
+	s[C_EOF] = td->c_cc[VEOF];
+#endif /* VEOF */
+#ifdef VEOL
+	s[C_EOL] = td->c_cc[VEOL];
+#endif /* VEOL */
+#ifdef VEOL2
+	s[C_EOL2] = td->c_cc[VEOL2];
+#endif /* VEOL2 */
+#ifdef VSWTCH
+	s[C_SWTCH] = td->c_cc[VSWTCH];
+#endif /* VSWTCH */
+#ifdef VDSWTCH
+	s[C_DSWTCH] = td->c_cc[VDSWTCH];
+#endif /* VDSWTCH */
+#ifdef VERASE2
+	s[C_ERASE2] = td->c_cc[VERASE2];
+#endif /* VERASE2 */
+#ifdef VSTART
+	s[C_START] = td->c_cc[VSTART];
+#endif /* VSTART */
+#ifdef VSTOP
+	s[C_STOP] = td->c_cc[VSTOP];
+#endif /* VSTOP */
+#ifdef VWERASE
+	s[C_WERASE] = td->c_cc[VWERASE];
+#endif /* VWERASE */
+#ifdef VSUSP
+	s[C_SUSP] = td->c_cc[VSUSP];
+#endif /* VSUSP */
+#ifdef VDSUSP
+	s[C_DSUSP] = td->c_cc[VDSUSP];
+#endif /* VDSUSP */
+#ifdef VREPRINT
+	s[C_REPRINT] = td->c_cc[VREPRINT];
+#endif /* VREPRINT */
+#ifdef VDISCARD
+	s[C_DISCARD] = td->c_cc[VDISCARD];
+#endif /* VDISCARD */
+#ifdef VLNEXT
+	s[C_LNEXT] = td->c_cc[VLNEXT];
+#endif /* VLNEXT */
+#ifdef VSTATUS
+	s[C_STATUS] = td->c_cc[VSTATUS];
+#endif /* VSTATUS */
+#ifdef VPAGE
+	s[C_PAGE] = td->c_cc[VPAGE];
+#endif /* VPAGE */
+#ifdef VPGOFF
+	s[C_PGOFF] = td->c_cc[VPGOFF];
+#endif /* VPGOFF */
+#ifdef VKILL2
+	s[C_KILL2] = td->c_cc[VKILL2];
+#endif /* KILL2 */
+#ifdef VMIN
+	s[C_MIN] = td->c_cc[VMIN];
+#endif /* VMIN */
+#ifdef VTIME
+	s[C_TIME] = td->c_cc[VTIME];
+#endif /* VTIME */
+}				/* tty__getchar */
+
+
+/* tty__setchar():
+ *	Set the tty characters
+ */
+private void
+tty__setchar(struct termios *td, unsigned char *s)
+{
+
+#ifdef VINTR
+	td->c_cc[VINTR] = s[C_INTR];
+#endif /* VINTR */
+#ifdef VQUIT
+	td->c_cc[VQUIT] = s[C_QUIT];
+#endif /* VQUIT */
+#ifdef VERASE
+	td->c_cc[VERASE] = s[C_ERASE];
+#endif /* VERASE */
+#ifdef VKILL
+	td->c_cc[VKILL] = s[C_KILL];
+#endif /* VKILL */
+#ifdef VEOF
+	td->c_cc[VEOF] = s[C_EOF];
+#endif /* VEOF */
+#ifdef VEOL
+	td->c_cc[VEOL] = s[C_EOL];
+#endif /* VEOL */
+#ifdef VEOL2
+	td->c_cc[VEOL2] = s[C_EOL2];
+#endif /* VEOL2 */
+#ifdef VSWTCH
+	td->c_cc[VSWTCH] = s[C_SWTCH];
+#endif /* VSWTCH */
+#ifdef VDSWTCH
+	td->c_cc[VDSWTCH] = s[C_DSWTCH];
+#endif /* VDSWTCH */
+#ifdef VERASE2
+	td->c_cc[VERASE2] = s[C_ERASE2];
+#endif /* VERASE2 */
+#ifdef VSTART
+	td->c_cc[VSTART] = s[C_START];
+#endif /* VSTART */
+#ifdef VSTOP
+	td->c_cc[VSTOP] = s[C_STOP];
+#endif /* VSTOP */
+#ifdef VWERASE
+	td->c_cc[VWERASE] = s[C_WERASE];
+#endif /* VWERASE */
+#ifdef VSUSP
+	td->c_cc[VSUSP] = s[C_SUSP];
+#endif /* VSUSP */
+#ifdef VDSUSP
+	td->c_cc[VDSUSP] = s[C_DSUSP];
+#endif /* VDSUSP */
+#ifdef VREPRINT
+	td->c_cc[VREPRINT] = s[C_REPRINT];
+#endif /* VREPRINT */
+#ifdef VDISCARD
+	td->c_cc[VDISCARD] = s[C_DISCARD];
+#endif /* VDISCARD */
+#ifdef VLNEXT
+	td->c_cc[VLNEXT] = s[C_LNEXT];
+#endif /* VLNEXT */
+#ifdef VSTATUS
+	td->c_cc[VSTATUS] = s[C_STATUS];
+#endif /* VSTATUS */
+#ifdef VPAGE
+	td->c_cc[VPAGE] = s[C_PAGE];
+#endif /* VPAGE */
+#ifdef VPGOFF
+	td->c_cc[VPGOFF] = s[C_PGOFF];
+#endif /* VPGOFF */
+#ifdef VKILL2
+	td->c_cc[VKILL2] = s[C_KILL2];
+#endif /* VKILL2 */
+#ifdef VMIN
+	td->c_cc[VMIN] = s[C_MIN];
+#endif /* VMIN */
+#ifdef VTIME
+	td->c_cc[VTIME] = s[C_TIME];
+#endif /* VTIME */
+}				/* tty__setchar */
+
+
+/* tty_bind_char():
+ *	Rebind the editline functions
+ */
+protected void
+tty_bind_char(EditLine *el, int force)
+{
+
+	unsigned char *t_n = el->el_tty.t_c[ED_IO];
+	unsigned char *t_o = el->el_tty.t_ed.c_cc;
+	Char new[2], old[2];
+	const ttymap_t *tp;
+	el_action_t *map, *alt;
+	const el_action_t *dmap, *dalt;
+	new[1] = old[1] = '\0';
+
+	map = el->el_map.key;
+	alt = el->el_map.alt;
+	if (el->el_map.type == MAP_VI) {
+		dmap = el->el_map.vii;
+		dalt = el->el_map.vic;
+	} else {
+		dmap = el->el_map.emacs;
+		dalt = NULL;
+	}
+
+	for (tp = tty_map; tp->nch != (Int)-1; tp++) {
+		new[0] = t_n[tp->nch];
+		old[0] = t_o[tp->och];
+		if (new[0] == old[0] && !force)
+			continue;
+		/* Put the old default binding back, and set the new binding */
+		keymacro_clear(el, map, old);
+		map[UC(old[0])] = dmap[UC(old[0])];
+		keymacro_clear(el, map, new);
+		/* MAP_VI == 1, MAP_EMACS == 0... */
+		map[UC(new[0])] = tp->bind[el->el_map.type];
+		if (dalt) {
+			keymacro_clear(el, alt, old);
+			alt[UC(old[0])] = dalt[UC(old[0])];
+			keymacro_clear(el, alt, new);
+			alt[UC(new[0])] = tp->bind[el->el_map.type + 1];
+		}
+	}
+}
+
+
+/* tty_rawmode():
+ * 	Set terminal into 1 character at a time mode.
+ */
+protected int
+tty_rawmode(EditLine *el)
+{
+
+	if (el->el_tty.t_mode == ED_IO || el->el_tty.t_mode == QU_IO)
+		return 0;
+
+	if (el->el_flags & EDIT_DISABLED)
+		return 0;
+
+	if (tty_getty(el, &el->el_tty.t_ts) == -1) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile, "%s: tty_getty: %s\n", __func__,
+		    strerror(errno));
+#endif /* DEBUG_TTY */
+		return -1;
+	}
+	/*
+         * We always keep up with the eight bit setting and the speed of the
+         * tty. But we only believe changes that are made to cooked mode!
+         */
+	el->el_tty.t_eight = tty__geteightbit(&el->el_tty.t_ts);
+	el->el_tty.t_speed = tty__getspeed(&el->el_tty.t_ts);
+
+	if (tty__getspeed(&el->el_tty.t_ex) != el->el_tty.t_speed ||
+	    tty__getspeed(&el->el_tty.t_ed) != el->el_tty.t_speed) {
+		(void) cfsetispeed(&el->el_tty.t_ex, el->el_tty.t_speed);
+		(void) cfsetospeed(&el->el_tty.t_ex, el->el_tty.t_speed);
+		(void) cfsetispeed(&el->el_tty.t_ed, el->el_tty.t_speed);
+		(void) cfsetospeed(&el->el_tty.t_ed, el->el_tty.t_speed);
+	}
+	if (tty__cooked_mode(&el->el_tty.t_ts)) {
+		if (el->el_tty.t_ts.c_cflag != el->el_tty.t_ex.c_cflag) {
+			el->el_tty.t_ex.c_cflag =
+			    el->el_tty.t_ts.c_cflag;
+			el->el_tty.t_ex.c_cflag &=
+			    ~el->el_tty.t_t[EX_IO][MD_CTL].t_clrmask;
+			el->el_tty.t_ex.c_cflag |=
+			    el->el_tty.t_t[EX_IO][MD_CTL].t_setmask;
+
+			el->el_tty.t_ed.c_cflag =
+			    el->el_tty.t_ts.c_cflag;
+			el->el_tty.t_ed.c_cflag &=
+			    ~el->el_tty.t_t[ED_IO][MD_CTL].t_clrmask;
+			el->el_tty.t_ed.c_cflag |=
+			    el->el_tty.t_t[ED_IO][MD_CTL].t_setmask;
+		}
+		if ((el->el_tty.t_ts.c_lflag != el->el_tty.t_ex.c_lflag) &&
+		    (el->el_tty.t_ts.c_lflag != el->el_tty.t_ed.c_lflag)) {
+			el->el_tty.t_ex.c_lflag =
+			    el->el_tty.t_ts.c_lflag;
+			el->el_tty.t_ex.c_lflag &=
+			    ~el->el_tty.t_t[EX_IO][MD_LIN].t_clrmask;
+			el->el_tty.t_ex.c_lflag |=
+			    el->el_tty.t_t[EX_IO][MD_LIN].t_setmask;
+
+			el->el_tty.t_ed.c_lflag =
+			    el->el_tty.t_ts.c_lflag;
+			el->el_tty.t_ed.c_lflag &=
+			    ~el->el_tty.t_t[ED_IO][MD_LIN].t_clrmask;
+			el->el_tty.t_ed.c_lflag |=
+			    el->el_tty.t_t[ED_IO][MD_LIN].t_setmask;
+		}
+		if ((el->el_tty.t_ts.c_iflag != el->el_tty.t_ex.c_iflag) &&
+		    (el->el_tty.t_ts.c_iflag != el->el_tty.t_ed.c_iflag)) {
+			el->el_tty.t_ex.c_iflag =
+			    el->el_tty.t_ts.c_iflag;
+			el->el_tty.t_ex.c_iflag &=
+			    ~el->el_tty.t_t[EX_IO][MD_INP].t_clrmask;
+			el->el_tty.t_ex.c_iflag |=
+			    el->el_tty.t_t[EX_IO][MD_INP].t_setmask;
+
+			el->el_tty.t_ed.c_iflag =
+			    el->el_tty.t_ts.c_iflag;
+			el->el_tty.t_ed.c_iflag &=
+			    ~el->el_tty.t_t[ED_IO][MD_INP].t_clrmask;
+			el->el_tty.t_ed.c_iflag |=
+			    el->el_tty.t_t[ED_IO][MD_INP].t_setmask;
+		}
+		if ((el->el_tty.t_ts.c_oflag != el->el_tty.t_ex.c_oflag) &&
+		    (el->el_tty.t_ts.c_oflag != el->el_tty.t_ed.c_oflag)) {
+			el->el_tty.t_ex.c_oflag =
+			    el->el_tty.t_ts.c_oflag;
+			el->el_tty.t_ex.c_oflag &=
+			    ~el->el_tty.t_t[EX_IO][MD_OUT].t_clrmask;
+			el->el_tty.t_ex.c_oflag |=
+			    el->el_tty.t_t[EX_IO][MD_OUT].t_setmask;
+
+			el->el_tty.t_ed.c_oflag =
+			    el->el_tty.t_ts.c_oflag;
+			el->el_tty.t_ed.c_oflag &=
+			    ~el->el_tty.t_t[ED_IO][MD_OUT].t_clrmask;
+			el->el_tty.t_ed.c_oflag |=
+			    el->el_tty.t_t[ED_IO][MD_OUT].t_setmask;
+		}
+		if (tty__gettabs(&el->el_tty.t_ex) == 0)
+			el->el_tty.t_tabs = 0;
+		else
+			el->el_tty.t_tabs = EL_CAN_TAB ? 1 : 0;
+
+		{
+			int i;
+
+			tty__getchar(&el->el_tty.t_ts, el->el_tty.t_c[TS_IO]);
+			/*
+		         * Check if the user made any changes.
+		         * If he did, then propagate the changes to the
+		         * edit and execute data structures.
+		         */
+			for (i = 0; i < C_NCC; i++)
+				if (el->el_tty.t_c[TS_IO][i] !=
+				    el->el_tty.t_c[EX_IO][i])
+					break;
+
+			if (i != C_NCC) {
+				/*
+				 * Propagate changes only to the unprotected
+				 * chars that have been modified just now.
+				 */
+				for (i = 0; i < C_NCC; i++) {
+					if (!((el->el_tty.t_t[ED_IO][MD_CHAR].t_setmask & C_SH(i)))
+					    && (el->el_tty.t_c[TS_IO][i] != el->el_tty.t_c[EX_IO][i]))
+						el->el_tty.t_c[ED_IO][i] = el->el_tty.t_c[TS_IO][i];
+					if (el->el_tty.t_t[ED_IO][MD_CHAR].t_clrmask & C_SH(i))
+						el->el_tty.t_c[ED_IO][i] = el->el_tty.t_vdisable;
+				}
+				tty_bind_char(el, 0);
+				tty__setchar(&el->el_tty.t_ed, el->el_tty.t_c[ED_IO]);
+
+				for (i = 0; i < C_NCC; i++) {
+					if (!((el->el_tty.t_t[EX_IO][MD_CHAR].t_setmask & C_SH(i)))
+					    && (el->el_tty.t_c[TS_IO][i] != el->el_tty.t_c[EX_IO][i]))
+						el->el_tty.t_c[EX_IO][i] = el->el_tty.t_c[TS_IO][i];
+					if (el->el_tty.t_t[EX_IO][MD_CHAR].t_clrmask & C_SH(i))
+						el->el_tty.t_c[EX_IO][i] = el->el_tty.t_vdisable;
+				}
+				tty__setchar(&el->el_tty.t_ex, el->el_tty.t_c[EX_IO]);
+			}
+		}
+	}
+	if (tty_setty(el, TCSADRAIN, &el->el_tty.t_ed) == -1) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile, "%s: tty_setty: %s\n", __func__,
+		    strerror(errno));
+#endif /* DEBUG_TTY */
+		return -1;
+	}
+	el->el_tty.t_mode = ED_IO;
+	return 0;
+}
+
+
+/* tty_cookedmode():
+ *	Set the tty back to normal mode
+ */
+protected int
+tty_cookedmode(EditLine *el)
+{				/* set tty in normal setup */
+
+	if (el->el_tty.t_mode == EX_IO)
+		return 0;
+
+	if (el->el_flags & EDIT_DISABLED)
+		return 0;
+
+	if (tty_setty(el, TCSADRAIN, &el->el_tty.t_ex) == -1) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile, "%s: tty_setty: %s\n", __func__,
+		    strerror(errno));
+#endif /* DEBUG_TTY */
+		return -1;
+	}
+	el->el_tty.t_mode = EX_IO;
+	return 0;
+}
+
+
+/* tty_quotemode():
+ *	Turn on quote mode
+ */
+protected int
+tty_quotemode(EditLine *el)
+{
+	if (el->el_tty.t_mode == QU_IO)
+		return 0;
+
+	el->el_tty.t_qu = el->el_tty.t_ed;
+
+	el->el_tty.t_qu.c_iflag &= ~el->el_tty.t_t[QU_IO][MD_INP].t_clrmask;
+	el->el_tty.t_qu.c_iflag |= el->el_tty.t_t[QU_IO][MD_INP].t_setmask;
+
+	el->el_tty.t_qu.c_oflag &= ~el->el_tty.t_t[QU_IO][MD_OUT].t_clrmask;
+	el->el_tty.t_qu.c_oflag |= el->el_tty.t_t[QU_IO][MD_OUT].t_setmask;
+
+	el->el_tty.t_qu.c_cflag &= ~el->el_tty.t_t[QU_IO][MD_CTL].t_clrmask;
+	el->el_tty.t_qu.c_cflag |= el->el_tty.t_t[QU_IO][MD_CTL].t_setmask;
+
+	el->el_tty.t_qu.c_lflag &= ~el->el_tty.t_t[QU_IO][MD_LIN].t_clrmask;
+	el->el_tty.t_qu.c_lflag |= el->el_tty.t_t[QU_IO][MD_LIN].t_setmask;
+
+	if (tty_setty(el, TCSADRAIN, &el->el_tty.t_qu) == -1) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile, "%s: tty_setty: %s\n", __func__,
+		    strerror(errno));
+#endif /* DEBUG_TTY */
+		return -1;
+	}
+	el->el_tty.t_mode = QU_IO;
+	return 0;
+}
+
+
+/* tty_noquotemode():
+ *	Turn off quote mode
+ */
+protected int
+tty_noquotemode(EditLine *el)
+{
+
+	if (el->el_tty.t_mode != QU_IO)
+		return 0;
+	if (tty_setty(el, TCSADRAIN, &el->el_tty.t_ed) == -1) {
+#ifdef DEBUG_TTY
+		(void) fprintf(el->el_errfile, "%s: tty_setty: %s\n", __func__,
+		    strerror(errno));
+#endif /* DEBUG_TTY */
+		return -1;
+	}
+	el->el_tty.t_mode = ED_IO;
+	return 0;
+}
+
+
+/* tty_stty():
+ *	Stty builtin
+ */
+protected int
+/*ARGSUSED*/
+tty_stty(EditLine *el, int argc __attribute__((__unused__)), const Char **argv)
+{
+	const ttymodes_t *m;
+	char x;
+	int aflag = 0;
+	const Char *s, *d;
+        char name[EL_BUFSIZ];
+	struct termios *tios = &el->el_tty.t_ex;
+	int z = EX_IO;
+
+	if (argv == NULL)
+		return -1;
+	strncpy(name, ct_encode_string(*argv++, &el->el_scratch), sizeof(name));
+        name[sizeof(name) - 1] = '\0';
+
+	while (argv && *argv && argv[0][0] == '-' && argv[0][2] == '\0')
+		switch (argv[0][1]) {
+		case 'a':
+			aflag++;
+			argv++;
+			break;
+		case 'd':
+			argv++;
+			tios = &el->el_tty.t_ed;
+			z = ED_IO;
+			break;
+		case 'x':
+			argv++;
+			tios = &el->el_tty.t_ex;
+			z = EX_IO;
+			break;
+		case 'q':
+			argv++;
+			tios = &el->el_tty.t_ts;
+			z = QU_IO;
+			break;
+		default:
+			(void) fprintf(el->el_errfile,
+			    "%s: Unknown switch `%c'.\n",
+			    name, argv[0][1]);
+			return -1;
+		}
+
+	if (!argv || !*argv) {
+		int i = -1;
+		size_t len = 0, st = 0, cu;
+		for (m = ttymodes; m->m_name; m++) {
+			if (m->m_type != i) {
+				(void) fprintf(el->el_outfile, "%s%s",
+				    i != -1 ? "\n" : "",
+				    el->el_tty.t_t[z][m->m_type].t_name);
+				i = m->m_type;
+				st = len =
+				    strlen(el->el_tty.t_t[z][m->m_type].t_name);
+			}
+			if (i != -1) {
+			    x = (el->el_tty.t_t[z][i].t_setmask & m->m_value)
+				?  '+' : '\0';
+
+			    if (el->el_tty.t_t[z][i].t_clrmask & m->m_value)
+				x = '-';
+			} else {
+			    x = '\0';
+			}
+
+			if (x != '\0' || aflag) {
+
+				cu = strlen(m->m_name) + (x != '\0') + 1;
+
+				if (len + cu >=
+				    (size_t)el->el_terminal.t_size.h) {
+					(void) fprintf(el->el_outfile, "\n%*s",
+					    (int)st, "");
+					len = st + cu;
+				} else
+					len += cu;
+
+				if (x != '\0')
+					(void) fprintf(el->el_outfile, "%c%s ",
+					    x, m->m_name);
+				else
+					(void) fprintf(el->el_outfile, "%s ",
+					    m->m_name);
+			}
+		}
+		(void) fprintf(el->el_outfile, "\n");
+		return 0;
+	}
+	while (argv && (s = *argv++)) {
+		const Char *p;
+		switch (*s) {
+		case '+':
+		case '-':
+			x = (char)*s++;
+			break;
+		default:
+			x = '\0';
+			break;
+		}
+		d = s;
+		p = Strchr(s, '=');
+		for (m = ttymodes; m->m_name; m++)
+			if ((p ? strncmp(m->m_name, ct_encode_string(d,
+			    &el->el_scratch), (size_t)(p - d)) :
+			    strcmp(m->m_name, ct_encode_string(d,
+			    &el->el_scratch))) == 0 &&
+			    (p == NULL || m->m_type == MD_CHAR))
+				break;
+
+		if (!m->m_name) {
+			(void) fprintf(el->el_errfile,
+			    "%s: Invalid argument `" FSTR "'.\n", name, d);
+			return -1;
+		}
+		if (p) {
+			int c = ffs((int)m->m_value);
+			int v = *++p ? parse__escape(&p) :
+			    el->el_tty.t_vdisable;
+			assert(c != 0);
+			c--;
+			c = tty__getcharindex(c);
+			assert(c != -1);
+			tios->c_cc[c] = (cc_t)v;
+			continue;
+		}
+		switch (x) {
+		case '+':
+			el->el_tty.t_t[z][m->m_type].t_setmask |= m->m_value;
+			el->el_tty.t_t[z][m->m_type].t_clrmask &= ~m->m_value;
+			break;
+		case '-':
+			el->el_tty.t_t[z][m->m_type].t_setmask &= ~m->m_value;
+			el->el_tty.t_t[z][m->m_type].t_clrmask |= m->m_value;
+			break;
+		default:
+			el->el_tty.t_t[z][m->m_type].t_setmask &= ~m->m_value;
+			el->el_tty.t_t[z][m->m_type].t_clrmask &= ~m->m_value;
+			break;
+		}
+	}
+
+	if (el->el_tty.t_mode == z) {
+		if (tty_setty(el, TCSADRAIN, tios) == -1) {
+#ifdef DEBUG_TTY
+			(void) fprintf(el->el_errfile, "%s: tty_setty: %s\n",
+			    __func__, strerror(errno));
+#endif /* DEBUG_TTY */
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+
+#ifdef notyet
+/* tty_printchar():
+ *	DEbugging routine to print the tty characters
+ */
+private void
+tty_printchar(EditLine *el, unsigned char *s)
+{
+	ttyperm_t *m;
+	int i;
+
+	for (i = 0; i < C_NCC; i++) {
+		for (m = el->el_tty.t_t; m->m_name; m++)
+			if (m->m_type == MD_CHAR && C_SH(i) == m->m_value)
+				break;
+		if (m->m_name)
+			(void) fprintf(el->el_errfile, "%s ^%c ",
+			    m->m_name, s[i] + 'A' - 1);
+		if (i % 5 == 0)
+			(void) fprintf(el->el_errfile, "\n");
+	}
+	(void) fprintf(el->el_errfile, "\n");
+}
+#endif /* notyet */
diff --git a/src/tty.h b/src/tty.h
new file mode 100644
index 0000000..7bdb0b2
--- /dev/null
+++ b/src/tty.h
@@ -0,0 +1,481 @@
+/*	$NetBSD: tty.h,v 1.14 2012/05/15 15:59:01 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)tty.h	8.1 (Berkeley) 6/4/93
+ */
+
+/*
+ * el.tty.h: Local terminal header
+ */
+#ifndef _h_el_tty
+#define	_h_el_tty
+
+#include "sys.h"
+#include "histedit.h"
+#include <termios.h>
+#include <unistd.h>
+
+/* Define our own since everyone gets it wrong! */
+#define	CONTROL(A)	((A) & 037)
+
+/*
+ * Aix compatible names
+ */
+# if defined(VWERSE) && !defined(VWERASE)
+#  define VWERASE VWERSE
+# endif /* VWERSE && !VWERASE */
+
+# if defined(VDISCRD) && !defined(VDISCARD)
+#  define VDISCARD VDISCRD
+# endif /* VDISCRD && !VDISCARD */
+
+# if defined(VFLUSHO) && !defined(VDISCARD)
+#  define VDISCARD VFLUSHO
+# endif  /* VFLUSHO && VDISCARD */
+
+# if defined(VSTRT) && !defined(VSTART)
+#  define VSTART VSTRT
+# endif /* VSTRT && ! VSTART */
+
+# if defined(VSTAT) && !defined(VSTATUS)
+#  define VSTATUS VSTAT
+# endif /* VSTAT && ! VSTATUS */
+
+# ifndef ONLRET
+#  define ONLRET 0
+# endif /* ONLRET */
+
+# ifndef TAB3
+#  ifdef OXTABS
+#   define TAB3 OXTABS
+#  else
+#   define TAB3 0
+#  endif /* OXTABS */
+# endif /* !TAB3 */
+
+# if defined(OXTABS) && !defined(XTABS)
+#  define XTABS OXTABS
+# endif /* OXTABS && !XTABS */
+
+# ifndef ONLCR
+#  define ONLCR 0
+# endif /* ONLCR */
+
+# ifndef IEXTEN
+#  define IEXTEN 0
+# endif /* IEXTEN */
+
+# ifndef ECHOCTL
+#  define ECHOCTL 0
+# endif /* ECHOCTL */
+
+# ifndef PARENB
+#  define PARENB 0
+# endif /* PARENB */
+
+# ifndef EXTPROC
+#  define EXTPROC 0
+# endif /* EXTPROC */
+
+# ifndef FLUSHO
+#  define FLUSHO  0
+# endif /* FLUSHO */
+
+
+# if defined(VDISABLE) && !defined(_POSIX_VDISABLE)
+#  define _POSIX_VDISABLE VDISABLE
+# endif /* VDISABLE && ! _POSIX_VDISABLE */
+
+/*
+ * Work around ISC's definition of IEXTEN which is
+ * XCASE!
+ */
+# ifdef ISC
+#  if defined(IEXTEN) && defined(XCASE)
+#   if IEXTEN == XCASE
+#    undef IEXTEN
+#    define IEXTEN 0
+#   endif /* IEXTEN == XCASE */
+#  endif /* IEXTEN && XCASE */
+#  if defined(IEXTEN) && !defined(XCASE)
+#   define XCASE IEXTEN
+#   undef IEXTEN
+#   define IEXTEN 0
+#  endif /* IEXTEN && !XCASE */
+# endif /* ISC */
+
+/*
+ * Work around convex weirdness where turning off IEXTEN makes us
+ * lose all postprocessing!
+ */
+#if defined(convex) || defined(__convex__)
+# if defined(IEXTEN) && IEXTEN != 0
+#  undef IEXTEN
+#  define IEXTEN 0
+# endif /* IEXTEN != 0 */
+#endif /* convex || __convex__ */
+
+/*
+ * So that we don't lose job control.
+ */
+#ifdef __SVR4
+# undef CSWTCH
+#endif
+
+#ifndef _POSIX_VDISABLE
+# define _POSIX_VDISABLE ((unsigned char) -1)
+#endif /* _POSIX_VDISABLE */
+
+#if !defined(CREPRINT) && defined(CRPRNT)
+# define CREPRINT CRPRNT
+#endif /* !CREPRINT && CRPRNT */
+#if !defined(CDISCARD) && defined(CFLUSH)
+# define CDISCARD CFLUSH
+#endif /* !CDISCARD && CFLUSH */
+
+#ifndef CINTR
+# define CINTR		CONTROL('c')
+#endif /* CINTR */
+#ifndef CQUIT
+# define CQUIT		034	/* ^\ */
+#endif /* CQUIT */
+#ifndef CERASE
+# define CERASE		0177	/* ^? */
+#endif /* CERASE */
+#ifndef CKILL
+# define CKILL		CONTROL('u')
+#endif /* CKILL */
+#ifndef CEOF
+# define CEOF		CONTROL('d')
+#endif /* CEOF */
+#ifndef CEOL
+# define CEOL		_POSIX_VDISABLE
+#endif /* CEOL */
+#ifndef CEOL2
+# define CEOL2		_POSIX_VDISABLE
+#endif /* CEOL2 */
+#ifndef CSWTCH
+# define CSWTCH		_POSIX_VDISABLE
+#endif /* CSWTCH */
+#ifndef CDSWTCH
+# define CDSWTCH	_POSIX_VDISABLE
+#endif /* CDSWTCH */
+#ifndef CERASE2
+# define CERASE2	_POSIX_VDISABLE
+#endif /* CERASE2 */
+#ifndef CSTART
+# define CSTART		CONTROL('q')
+#endif /* CSTART */
+#ifndef CSTOP
+# define CSTOP		CONTROL('s')
+#endif /* CSTOP */
+#ifndef CSUSP
+# define CSUSP		CONTROL('z')
+#endif /* CSUSP */
+#ifndef CDSUSP
+# define CDSUSP		CONTROL('y')
+#endif /* CDSUSP */
+
+#ifdef hpux
+
+# ifndef CREPRINT
+#  define CREPRINT	_POSIX_VDISABLE
+# endif /* CREPRINT */
+# ifndef CDISCARD
+#  define CDISCARD	_POSIX_VDISABLE
+# endif /* CDISCARD */
+# ifndef CLNEXT
+#  define CLNEXT	_POSIX_VDISABLE
+# endif /* CLNEXT */
+# ifndef CWERASE
+#  define CWERASE	_POSIX_VDISABLE
+# endif /* CWERASE */
+
+#else /* !hpux */
+
+# ifndef CREPRINT
+#  define CREPRINT	CONTROL('r')
+# endif /* CREPRINT */
+# ifndef CDISCARD
+#  define CDISCARD	CONTROL('o')
+# endif /* CDISCARD */
+# ifndef CLNEXT
+#  define CLNEXT	CONTROL('v')
+# endif /* CLNEXT */
+# ifndef CWERASE
+#  define CWERASE	CONTROL('w')
+# endif /* CWERASE */
+
+#endif /* hpux */
+
+#ifndef CSTATUS
+# define CSTATUS	CONTROL('t')
+#endif /* CSTATUS */
+#ifndef CPAGE
+# define CPAGE		' '
+#endif /* CPAGE */
+#ifndef CPGOFF
+# define CPGOFF		CONTROL('m')
+#endif /* CPGOFF */
+#ifndef CKILL2
+# define CKILL2		_POSIX_VDISABLE
+#endif /* CKILL2 */
+#ifndef CBRK
+# ifndef masscomp
+#  define CBRK		0377
+# else
+#  define CBRK		'\0'
+# endif /* masscomp */
+#endif /* CBRK */
+#ifndef CMIN
+# define CMIN		CEOF
+#endif /* CMIN */
+#ifndef CTIME
+# define CTIME		CEOL
+#endif /* CTIME */
+
+/*
+ * Fix for sun inconsistency. On termio VSUSP and the rest of the
+ * ttychars > NCC are defined. So we undefine them.
+ */
+#if defined(TERMIO) || defined(POSIX)
+# if defined(POSIX) && defined(NCCS)
+#  define NUMCC		NCCS
+# else
+#  ifdef NCC
+#   define NUMCC	NCC
+#  endif /* NCC */
+# endif /* POSIX && NCCS */
+# ifdef NUMCC
+#  ifdef VINTR
+#   if NUMCC <= VINTR
+#    undef VINTR
+#   endif /* NUMCC <= VINTR */
+#  endif /* VINTR */
+#  ifdef VQUIT
+#   if NUMCC <= VQUIT
+#    undef VQUIT
+#   endif /* NUMCC <= VQUIT */
+#  endif /* VQUIT */
+#  ifdef VERASE
+#   if NUMCC <= VERASE
+#    undef VERASE
+#   endif /* NUMCC <= VERASE */
+#  endif /* VERASE */
+#  ifdef VKILL
+#   if NUMCC <= VKILL
+#    undef VKILL
+#   endif /* NUMCC <= VKILL */
+#  endif /* VKILL */
+#  ifdef VEOF
+#   if NUMCC <= VEOF
+#    undef VEOF
+#   endif /* NUMCC <= VEOF */
+#  endif /* VEOF */
+#  ifdef VEOL
+#   if NUMCC <= VEOL
+#    undef VEOL
+#   endif /* NUMCC <= VEOL */
+#  endif /* VEOL */
+#  ifdef VEOL2
+#   if NUMCC <= VEOL2
+#    undef VEOL2
+#   endif /* NUMCC <= VEOL2 */
+#  endif /* VEOL2 */
+#  ifdef VSWTCH
+#   if NUMCC <= VSWTCH
+#    undef VSWTCH
+#   endif /* NUMCC <= VSWTCH */
+#  endif /* VSWTCH */
+#  ifdef VDSWTCH
+#   if NUMCC <= VDSWTCH
+#    undef VDSWTCH
+#   endif /* NUMCC <= VDSWTCH */
+#  endif /* VDSWTCH */
+#  ifdef VERASE2
+#   if NUMCC <= VERASE2
+#    undef VERASE2
+#   endif /* NUMCC <= VERASE2 */
+#  endif /* VERASE2 */
+#  ifdef VSTART
+#   if NUMCC <= VSTART
+#    undef VSTART
+#   endif /* NUMCC <= VSTART */
+#  endif /* VSTART */
+#  ifdef VSTOP
+#   if NUMCC <= VSTOP
+#    undef VSTOP
+#   endif /* NUMCC <= VSTOP */
+#  endif /* VSTOP */
+#  ifdef VWERASE
+#   if NUMCC <= VWERASE
+#    undef VWERASE
+#   endif /* NUMCC <= VWERASE */
+#  endif /* VWERASE */
+#  ifdef VSUSP
+#   if NUMCC <= VSUSP
+#    undef VSUSP
+#   endif /* NUMCC <= VSUSP */
+#  endif /* VSUSP */
+#  ifdef VDSUSP
+#   if NUMCC <= VDSUSP
+#    undef VDSUSP
+#   endif /* NUMCC <= VDSUSP */
+#  endif /* VDSUSP */
+#  ifdef VREPRINT
+#   if NUMCC <= VREPRINT
+#    undef VREPRINT
+#   endif /* NUMCC <= VREPRINT */
+#  endif /* VREPRINT */
+#  ifdef VDISCARD
+#   if NUMCC <= VDISCARD
+#    undef VDISCARD
+#   endif /* NUMCC <= VDISCARD */
+#  endif /* VDISCARD */
+#  ifdef VLNEXT
+#   if NUMCC <= VLNEXT
+#    undef VLNEXT
+#   endif /* NUMCC <= VLNEXT */
+#  endif /* VLNEXT */
+#  ifdef VSTATUS
+#   if NUMCC <= VSTATUS
+#    undef VSTATUS
+#   endif /* NUMCC <= VSTATUS */
+#  endif /* VSTATUS */
+#  ifdef VPAGE
+#   if NUMCC <= VPAGE
+#    undef VPAGE
+#   endif /* NUMCC <= VPAGE */
+#  endif /* VPAGE */
+#  ifdef VPGOFF
+#   if NUMCC <= VPGOFF
+#    undef VPGOFF
+#   endif /* NUMCC <= VPGOFF */
+#  endif /* VPGOFF */
+#  ifdef VKILL2
+#   if NUMCC <= VKILL2
+#    undef VKILL2
+#   endif /* NUMCC <= VKILL2 */
+#  endif /* VKILL2 */
+#  ifdef VBRK
+#   if NUMCC <= VBRK
+#    undef VBRK
+#   endif /* NUMCC <= VBRK */
+#  endif /* VBRK */
+#  ifdef VMIN
+#   if NUMCC <= VMIN
+#    undef VMIN
+#   endif /* NUMCC <= VMIN */
+#  endif /* VMIN */
+#  ifdef VTIME
+#   if NUMCC <= VTIME
+#    undef VTIME
+#   endif /* NUMCC <= VTIME */
+#  endif /* VTIME */
+# endif /* NUMCC */
+#endif /* !POSIX */
+
+#define	C_INTR		 0
+#define	C_QUIT		 1
+#define	C_ERASE		 2
+#define	C_KILL		 3
+#define	C_EOF		 4
+#define	C_EOL		 5
+#define	C_EOL2		 6
+#define	C_SWTCH		 7
+#define	C_DSWTCH	 8
+#define	C_ERASE2	 9
+#define	C_START		10
+#define	C_STOP		11
+#define	C_WERASE	12
+#define	C_SUSP		13
+#define	C_DSUSP		14
+#define	C_REPRINT	15
+#define	C_DISCARD	16
+#define	C_LNEXT		17
+#define	C_STATUS	18
+#define	C_PAGE		19
+#define	C_PGOFF		20
+#define	C_KILL2		21
+#define	C_BRK		22
+#define	C_MIN		23
+#define	C_TIME		24
+#define	C_NCC		25
+#define	C_SH(A)		((unsigned int)(1 << (A)))
+
+/*
+ * Terminal dependend data structures
+ */
+#define	EX_IO	0	/* while we are executing	*/
+#define	ED_IO	1	/* while we are editing		*/
+#define	TS_IO	2	/* new mode from terminal	*/
+#define	QU_IO	2	/* used only for quoted chars	*/
+#define	NN_IO	3	/* The number of entries	*/
+
+#define	MD_INP	0
+#define	MD_OUT	1
+#define	MD_CTL	2
+#define	MD_LIN	3
+#define	MD_CHAR	4
+#define	MD_NN	5
+
+typedef struct {
+	const char	*t_name;
+	unsigned int	 t_setmask;
+	unsigned int	 t_clrmask;
+} ttyperm_t[NN_IO][MD_NN];
+
+typedef unsigned char ttychar_t[NN_IO][C_NCC];
+
+protected int	tty_init(EditLine *);
+protected void	tty_end(EditLine *);
+protected int	tty_stty(EditLine *, int, const Char **);
+protected int	tty_rawmode(EditLine *);
+protected int	tty_cookedmode(EditLine *);
+protected int	tty_quotemode(EditLine *);
+protected int	tty_noquotemode(EditLine *);
+protected void	tty_bind_char(EditLine *, int);
+
+typedef struct {
+    ttyperm_t t_t;
+    ttychar_t t_c;
+    struct termios t_or, t_ex, t_ed, t_ts;
+    int t_tabs;
+    int t_eight;
+    speed_t t_speed;
+    int t_mode;
+    unsigned char t_vdisable;
+} el_tty_t;
+
+
+#endif /* _h_el_tty */
diff --git a/src/unvis.c b/src/unvis.c
new file mode 100644
index 0000000..4bbc7bc
--- /dev/null
+++ b/src/unvis.c
@@ -0,0 +1,554 @@
+/*	$NetBSD: unvis.c,v 1.41 2012/12/15 04:29:53 matt Exp $	*/
+
+/*-
+ * Copyright (c) 1989, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if defined(LIBC_SCCS) && !defined(lint)
+#if 0
+static char sccsid[] = "@(#)unvis.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: unvis.c,v 1.41 2012/12/15 04:29:53 matt Exp $");
+#endif
+#endif /* LIBC_SCCS and not lint */
+
+#include <sys/types.h>
+
+#include <assert.h>
+#include <ctype.h>
+#ifdef HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#include <stdio.h>
+#include <errno.h>
+#include <vis.h>
+
+#ifdef __weak_alias
+__weak_alias(strnunvisx,_strnunvisx)
+#endif
+
+#if !HAVE_VIS
+/*
+ * decode driven by state machine
+ */
+#define	S_GROUND	0	/* haven't seen escape char */
+#define	S_START		1	/* start decoding special sequence */
+#define	S_META		2	/* metachar started (M) */
+#define	S_META1		3	/* metachar more, regular char (-) */
+#define	S_CTRL		4	/* control char started (^) */
+#define	S_OCTAL2	5	/* octal digit 2 */
+#define	S_OCTAL3	6	/* octal digit 3 */
+#define	S_HEX		7	/* mandatory hex digit */
+#define	S_HEX1		8	/* http hex digit */
+#define	S_HEX2		9	/* http hex digit 2 */
+#define	S_MIME1		10	/* mime hex digit 1 */
+#define	S_MIME2		11	/* mime hex digit 2 */
+#define	S_EATCRNL	12	/* mime eating CRNL */
+#define	S_AMP		13	/* seen & */
+#define	S_NUMBER	14	/* collecting number */
+#define	S_STRING	15	/* collecting string */
+
+#define	isoctal(c)	(((u_char)(c)) >= '0' && ((u_char)(c)) <= '7')
+#define	xtod(c)		(isdigit(c) ? (c - '0') : ((tolower(c) - 'a') + 10))
+#define	XTOD(c)		(isdigit(c) ? (c - '0') : ((c - 'A') + 10))
+
+/*
+ * RFC 1866
+ */
+static const struct nv {
+	char name[7];
+	uint8_t value;
+} nv[] = {
+	{ "AElig",	198 }, /* capital AE diphthong (ligature)  */
+	{ "Aacute",	193 }, /* capital A, acute accent  */
+	{ "Acirc",	194 }, /* capital A, circumflex accent  */
+	{ "Agrave",	192 }, /* capital A, grave accent  */
+	{ "Aring",	197 }, /* capital A, ring  */
+	{ "Atilde",	195 }, /* capital A, tilde  */
+	{ "Auml",	196 }, /* capital A, dieresis or umlaut mark  */
+	{ "Ccedil",	199 }, /* capital C, cedilla  */
+	{ "ETH",	208 }, /* capital Eth, Icelandic  */
+	{ "Eacute",	201 }, /* capital E, acute accent  */
+	{ "Ecirc",	202 }, /* capital E, circumflex accent  */
+	{ "Egrave",	200 }, /* capital E, grave accent  */
+	{ "Euml",	203 }, /* capital E, dieresis or umlaut mark  */
+	{ "Iacute",	205 }, /* capital I, acute accent  */
+	{ "Icirc",	206 }, /* capital I, circumflex accent  */
+	{ "Igrave",	204 }, /* capital I, grave accent  */
+	{ "Iuml",	207 }, /* capital I, dieresis or umlaut mark  */
+	{ "Ntilde",	209 }, /* capital N, tilde  */
+	{ "Oacute",	211 }, /* capital O, acute accent  */
+	{ "Ocirc",	212 }, /* capital O, circumflex accent  */
+	{ "Ograve",	210 }, /* capital O, grave accent  */
+	{ "Oslash",	216 }, /* capital O, slash  */
+	{ "Otilde",	213 }, /* capital O, tilde  */
+	{ "Ouml",	214 }, /* capital O, dieresis or umlaut mark  */
+	{ "THORN",	222 }, /* capital THORN, Icelandic  */
+	{ "Uacute",	218 }, /* capital U, acute accent  */
+	{ "Ucirc",	219 }, /* capital U, circumflex accent  */
+	{ "Ugrave",	217 }, /* capital U, grave accent  */
+	{ "Uuml",	220 }, /* capital U, dieresis or umlaut mark  */
+	{ "Yacute",	221 }, /* capital Y, acute accent  */
+	{ "aacute",	225 }, /* small a, acute accent  */
+	{ "acirc",	226 }, /* small a, circumflex accent  */
+	{ "acute",	180 }, /* acute accent  */
+	{ "aelig",	230 }, /* small ae diphthong (ligature)  */
+	{ "agrave",	224 }, /* small a, grave accent  */
+	{ "amp",	 38 }, /* ampersand  */
+	{ "aring",	229 }, /* small a, ring  */
+	{ "atilde",	227 }, /* small a, tilde  */
+	{ "auml",	228 }, /* small a, dieresis or umlaut mark  */
+	{ "brvbar",	166 }, /* broken (vertical) bar  */
+	{ "ccedil",	231 }, /* small c, cedilla  */
+	{ "cedil",	184 }, /* cedilla  */
+	{ "cent",	162 }, /* cent sign  */
+	{ "copy",	169 }, /* copyright sign  */
+	{ "curren",	164 }, /* general currency sign  */
+	{ "deg",	176 }, /* degree sign  */
+	{ "divide",	247 }, /* divide sign  */
+	{ "eacute",	233 }, /* small e, acute accent  */
+	{ "ecirc",	234 }, /* small e, circumflex accent  */
+	{ "egrave",	232 }, /* small e, grave accent  */
+	{ "eth",	240 }, /* small eth, Icelandic  */
+	{ "euml",	235 }, /* small e, dieresis or umlaut mark  */
+	{ "frac12",	189 }, /* fraction one-half  */
+	{ "frac14",	188 }, /* fraction one-quarter  */
+	{ "frac34",	190 }, /* fraction three-quarters  */
+	{ "gt",		 62 }, /* greater than  */
+	{ "iacute",	237 }, /* small i, acute accent  */
+	{ "icirc",	238 }, /* small i, circumflex accent  */
+	{ "iexcl",	161 }, /* inverted exclamation mark  */
+	{ "igrave",	236 }, /* small i, grave accent  */
+	{ "iquest",	191 }, /* inverted question mark  */
+	{ "iuml",	239 }, /* small i, dieresis or umlaut mark  */
+	{ "laquo",	171 }, /* angle quotation mark, left  */
+	{ "lt",		 60 }, /* less than  */
+	{ "macr",	175 }, /* macron  */
+	{ "micro",	181 }, /* micro sign  */
+	{ "middot",	183 }, /* middle dot  */
+	{ "nbsp",	160 }, /* no-break space  */
+	{ "not",	172 }, /* not sign  */
+	{ "ntilde",	241 }, /* small n, tilde  */
+	{ "oacute",	243 }, /* small o, acute accent  */
+	{ "ocirc",	244 }, /* small o, circumflex accent  */
+	{ "ograve",	242 }, /* small o, grave accent  */
+	{ "ordf",	170 }, /* ordinal indicator, feminine  */
+	{ "ordm",	186 }, /* ordinal indicator, masculine  */
+	{ "oslash",	248 }, /* small o, slash  */
+	{ "otilde",	245 }, /* small o, tilde  */
+	{ "ouml",	246 }, /* small o, dieresis or umlaut mark  */
+	{ "para",	182 }, /* pilcrow (paragraph sign)  */
+	{ "plusmn",	177 }, /* plus-or-minus sign  */
+	{ "pound",	163 }, /* pound sterling sign  */
+	{ "quot",	 34 }, /* double quote  */
+	{ "raquo",	187 }, /* angle quotation mark, right  */
+	{ "reg",	174 }, /* registered sign  */
+	{ "sect",	167 }, /* section sign  */
+	{ "shy",	173 }, /* soft hyphen  */
+	{ "sup1",	185 }, /* superscript one  */
+	{ "sup2",	178 }, /* superscript two  */
+	{ "sup3",	179 }, /* superscript three  */
+	{ "szlig",	223 }, /* small sharp s, German (sz ligature)  */
+	{ "thorn",	254 }, /* small thorn, Icelandic  */
+	{ "times",	215 }, /* multiply sign  */
+	{ "uacute",	250 }, /* small u, acute accent  */
+	{ "ucirc",	251 }, /* small u, circumflex accent  */
+	{ "ugrave",	249 }, /* small u, grave accent  */
+	{ "uml",	168 }, /* umlaut (dieresis)  */
+	{ "uuml",	252 }, /* small u, dieresis or umlaut mark  */
+	{ "yacute",	253 }, /* small y, acute accent  */
+	{ "yen",	165 }, /* yen sign  */
+	{ "yuml",	255 }, /* small y, dieresis or umlaut mark  */
+};
+
+/*
+ * unvis - decode characters previously encoded by vis
+ */
+int
+unvis(char *cp, int c, int *astate, int flag)
+{
+	unsigned char uc = (unsigned char)c;
+	unsigned char st, ia, is, lc;
+
+/*
+ * Bottom 8 bits of astate hold the state machine state.
+ * Top 8 bits hold the current character in the http 1866 nv string decoding
+ */
+#define GS(a)		((a) & 0xff)
+#define SS(a, b)	(((uint32_t)(a) << 24) | (b))
+#define GI(a)		((uint32_t)(a) >> 24)
+
+	_DIAGASSERT(cp != NULL);
+	_DIAGASSERT(astate != NULL);
+	st = GS(*astate);
+
+	if (flag & UNVIS_END) {
+		switch (st) {
+		case S_OCTAL2:
+		case S_OCTAL3:
+		case S_HEX2:
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case S_GROUND:
+			return UNVIS_NOCHAR;
+		default:
+			return UNVIS_SYNBAD;
+		}
+	}
+
+	switch (st) {
+
+	case S_GROUND:
+		*cp = 0;
+		if ((flag & VIS_NOESCAPE) == 0 && c == '\\') {
+			*astate = SS(0, S_START);
+			return UNVIS_NOCHAR;
+		}
+		if ((flag & VIS_HTTP1808) && c == '%') {
+			*astate = SS(0, S_HEX1);
+			return UNVIS_NOCHAR;
+		}
+		if ((flag & VIS_HTTP1866) && c == '&') {
+			*astate = SS(0, S_AMP);
+			return UNVIS_NOCHAR;
+		}
+		if ((flag & VIS_MIMESTYLE) && c == '=') {
+			*astate = SS(0, S_MIME1);
+			return UNVIS_NOCHAR;
+		}
+		*cp = c;
+		return UNVIS_VALID;
+
+	case S_START:
+		switch(c) {
+		case '\\':
+			*cp = c;
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case '0': case '1': case '2': case '3':
+		case '4': case '5': case '6': case '7':
+			*cp = (c - '0');
+			*astate = SS(0, S_OCTAL2);
+			return UNVIS_NOCHAR;
+		case 'M':
+			*cp = (char)0200;
+			*astate = SS(0, S_META);
+			return UNVIS_NOCHAR;
+		case '^':
+			*astate = SS(0, S_CTRL);
+			return UNVIS_NOCHAR;
+		case 'n':
+			*cp = '\n';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 'r':
+			*cp = '\r';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 'b':
+			*cp = '\b';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 'a':
+			*cp = '\007';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 'v':
+			*cp = '\v';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 't':
+			*cp = '\t';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 'f':
+			*cp = '\f';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 's':
+			*cp = ' ';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 'E':
+			*cp = '\033';
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		case 'x':
+			*astate = SS(0, S_HEX);
+			return UNVIS_NOCHAR;
+		case '\n':
+			/*
+			 * hidden newline
+			 */
+			*astate = SS(0, S_GROUND);
+			return UNVIS_NOCHAR;
+		case '$':
+			/*
+			 * hidden marker
+			 */
+			*astate = SS(0, S_GROUND);
+			return UNVIS_NOCHAR;
+		}
+		goto bad;
+
+	case S_META:
+		if (c == '-')
+			*astate = SS(0, S_META1);
+		else if (c == '^')
+			*astate = SS(0, S_CTRL);
+		else 
+			goto bad;
+		return UNVIS_NOCHAR;
+
+	case S_META1:
+		*astate = SS(0, S_GROUND);
+		*cp |= c;
+		return UNVIS_VALID;
+
+	case S_CTRL:
+		if (c == '?')
+			*cp |= 0177;
+		else
+			*cp |= c & 037;
+		*astate = SS(0, S_GROUND);
+		return UNVIS_VALID;
+
+	case S_OCTAL2:	/* second possible octal digit */
+		if (isoctal(uc)) {
+			/*
+			 * yes - and maybe a third
+			 */
+			*cp = (*cp << 3) + (c - '0');
+			*astate = SS(0, S_OCTAL3);
+			return UNVIS_NOCHAR;
+		}
+		/*
+		 * no - done with current sequence, push back passed char
+		 */
+		*astate = SS(0, S_GROUND);
+		return UNVIS_VALIDPUSH;
+
+	case S_OCTAL3:	/* third possible octal digit */
+		*astate = SS(0, S_GROUND);
+		if (isoctal(uc)) {
+			*cp = (*cp << 3) + (c - '0');
+			return UNVIS_VALID;
+		}
+		/*
+		 * we were done, push back passed char
+		 */
+		return UNVIS_VALIDPUSH;
+
+	case S_HEX:
+		if (!isxdigit(uc))
+			goto bad;
+		/*FALLTHROUGH*/
+	case S_HEX1:
+		if (isxdigit(uc)) {
+			*cp = xtod(uc);
+			*astate = SS(0, S_HEX2);
+			return UNVIS_NOCHAR;
+		}
+		/*
+		 * no - done with current sequence, push back passed char
+		 */
+		*astate = SS(0, S_GROUND);
+		return UNVIS_VALIDPUSH;
+
+	case S_HEX2:
+		*astate = S_GROUND;
+		if (isxdigit(uc)) {
+			*cp = xtod(uc) | (*cp << 4);
+			return UNVIS_VALID;
+		}
+		return UNVIS_VALIDPUSH;
+
+	case S_MIME1:
+		if (uc == '\n' || uc == '\r') {
+			*astate = SS(0, S_EATCRNL);
+			return UNVIS_NOCHAR;
+		}
+		if (isxdigit(uc) && (isdigit(uc) || isupper(uc))) {
+			*cp = XTOD(uc);
+			*astate = SS(0, S_MIME2);
+			return UNVIS_NOCHAR;
+		}
+		goto bad;
+
+	case S_MIME2:
+		if (isxdigit(uc) && (isdigit(uc) || isupper(uc))) {
+			*astate = SS(0, S_GROUND);
+			*cp = XTOD(uc) | (*cp << 4);
+			return UNVIS_VALID;
+		}
+		goto bad;
+
+	case S_EATCRNL:
+		switch (uc) {
+		case '\r':
+		case '\n':
+			return UNVIS_NOCHAR;
+		case '=':
+			*astate = SS(0, S_MIME1);
+			return UNVIS_NOCHAR;
+		default:
+			*cp = uc;
+			*astate = SS(0, S_GROUND);
+			return UNVIS_VALID;
+		}
+
+	case S_AMP:
+		*cp = 0;
+		if (uc == '#') {
+			*astate = SS(0, S_NUMBER);
+			return UNVIS_NOCHAR;
+		}
+		*astate = SS(0, S_STRING);
+		/*FALLTHROUGH*/
+
+	case S_STRING:
+		ia = *cp;		/* index in the array */
+		is = GI(*astate);	/* index in the string */
+		lc = is == 0 ? 0 : nv[ia].name[is - 1];	/* last character */
+
+		if (uc == ';')
+			uc = '\0';
+
+		for (; ia < __arraycount(nv); ia++) {
+			if (is != 0 && nv[ia].name[is - 1] != lc)
+				goto bad;
+			if (nv[ia].name[is] == uc)
+				break;
+		}
+
+		if (ia == __arraycount(nv))
+			goto bad;
+
+		if (uc != 0) {
+			*cp = ia;
+			*astate = SS(is + 1, S_STRING);
+			return UNVIS_NOCHAR;
+		}
+
+		*cp = nv[ia].value;
+		*astate = SS(0, S_GROUND);
+		return UNVIS_VALID;
+
+	case S_NUMBER:
+		if (uc == ';')
+			return UNVIS_VALID;
+		if (!isdigit(uc))
+			goto bad;
+		*cp += (*cp * 10) + uc - '0';
+		return UNVIS_NOCHAR;
+
+	default:
+	bad:
+		/*
+		 * decoder in unknown state - (probably uninitialized)
+		 */
+		*astate = SS(0, S_GROUND);
+		return UNVIS_SYNBAD;
+	}
+}
+
+/*
+ * strnunvisx - decode src into dst
+ *
+ *	Number of chars decoded into dst is returned, -1 on error.
+ *	Dst is null terminated.
+ */
+
+int
+strnunvisx(char *dst, size_t dlen, const char *src, int flag)
+{
+	char c;
+	char t = '\0', *start = dst;
+	int state = 0;
+
+	_DIAGASSERT(src != NULL);
+	_DIAGASSERT(dst != NULL);
+#define CHECKSPACE() \
+	do { \
+		if (dlen-- == 0) { \
+			errno = ENOSPC; \
+			return -1; \
+		} \
+	} while (/*CONSTCOND*/0)
+
+	while ((c = *src++) != '\0') {
+ again:
+		switch (unvis(&t, c, &state, flag)) {
+		case UNVIS_VALID:
+			CHECKSPACE();
+			*dst++ = t;
+			break;
+		case UNVIS_VALIDPUSH:
+			CHECKSPACE();
+			*dst++ = t;
+			goto again;
+		case 0:
+		case UNVIS_NOCHAR:
+			break;
+		case UNVIS_SYNBAD:
+			errno = EINVAL;
+			return -1;
+		default:
+			_DIAGASSERT(/*CONSTCOND*/0);
+			errno = EINVAL;
+			return -1;
+		}
+	}
+	if (unvis(&t, c, &state, UNVIS_END) == UNVIS_VALID) {
+		CHECKSPACE();
+		*dst++ = t;
+	}
+	CHECKSPACE();
+	*dst = '\0';
+	return (int)(dst - start);
+}
+
+int
+strunvisx(char *dst, const char *src, int flag)
+{
+	return strnunvisx(dst, (size_t)~0, src, flag);
+}
+
+int
+strunvis(char *dst, const char *src)
+{
+	return strnunvisx(dst, (size_t)~0, src, 0);
+}
+
+int
+strnunvis(char *dst, size_t dlen, const char *src)
+{
+	return strnunvisx(dst, dlen, src, 0);
+}
+#endif
diff --git a/src/vi.c b/src/vi.c
new file mode 100644
index 0000000..c918acc
--- /dev/null
+++ b/src/vi.c
@@ -0,0 +1,1158 @@
+/*	$NetBSD: vi.c,v 1.43 2012/01/16 14:57:45 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1992, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Christos Zoulas of Cornell University.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#include <stdlib.h>
+#include <unistd.h>
+#include <limits.h>
+#include <sys/wait.h>
+
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+static char sccsid[] = "@(#)vi.c	8.1 (Berkeley) 6/4/93";
+#else
+__RCSID("$NetBSD: vi.c,v 1.43 2012/01/16 14:57:45 christos Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * vi.c: Vi mode commands.
+ */
+#include "el.h"
+
+private el_action_t	cv_action(EditLine *, Int);
+private el_action_t	cv_paste(EditLine *, Int);
+
+/* cv_action():
+ *	Handle vi actions.
+ */
+private el_action_t
+cv_action(EditLine *el, Int c)
+{
+
+	if (el->el_chared.c_vcmd.action != NOP) {
+		/* 'cc', 'dd' and (possibly) friends */
+		if (c != (Int)el->el_chared.c_vcmd.action)
+			return CC_ERROR;
+
+		if (!(c & YANK))
+			cv_undo(el);
+		cv_yank(el, el->el_line.buffer,
+		    (int)(el->el_line.lastchar - el->el_line.buffer));
+		el->el_chared.c_vcmd.action = NOP;
+		el->el_chared.c_vcmd.pos = 0;
+		if (!(c & YANK)) {
+			el->el_line.lastchar = el->el_line.buffer;
+			el->el_line.cursor = el->el_line.buffer;
+		}
+		if (c & INSERT)
+			el->el_map.current = el->el_map.key;
+
+		return CC_REFRESH;
+	}
+	el->el_chared.c_vcmd.pos = el->el_line.cursor;
+	el->el_chared.c_vcmd.action = c;
+	return CC_ARGHACK;
+}
+
+/* cv_paste():
+ *	Paste previous deletion before or after the cursor
+ */
+private el_action_t
+cv_paste(EditLine *el, Int c)
+{
+	c_kill_t *k = &el->el_chared.c_kill;
+	size_t len = (size_t)(k->last - k->buf);
+
+	if (k->buf == NULL || len == 0)
+		return CC_ERROR;
+#ifdef DEBUG_PASTE
+	(void) fprintf(el->el_errfile, "Paste: \"%.*s\"\n", (int)len, k->buf);
+#endif
+
+	cv_undo(el);
+
+	if (!c && el->el_line.cursor < el->el_line.lastchar)
+		el->el_line.cursor++;
+
+	c_insert(el, (int)len);
+	if (el->el_line.cursor + len > el->el_line.lastchar)
+		return CC_ERROR;
+	(void) memcpy(el->el_line.cursor, k->buf, len *
+	    sizeof(*el->el_line.cursor));
+
+	return CC_REFRESH;
+}
+
+
+/* vi_paste_next():
+ *	Vi paste previous deletion to the right of the cursor
+ *	[p]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_paste_next(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	return cv_paste(el, 0);
+}
+
+
+/* vi_paste_prev():
+ *	Vi paste previous deletion to the left of the cursor
+ *	[P]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_paste_prev(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	return cv_paste(el, 1);
+}
+
+
+/* vi_prev_big_word():
+ *	Vi move to the previous space delimited word
+ *	[B]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_prev_big_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor == el->el_line.buffer)
+		return CC_ERROR;
+
+	el->el_line.cursor = cv_prev_word(el->el_line.cursor,
+	    el->el_line.buffer,
+	    el->el_state.argument,
+	    cv__isWord);
+
+	if (el->el_chared.c_vcmd.action != NOP) {
+		cv_delfini(el);
+		return CC_REFRESH;
+	}
+	return CC_CURSOR;
+}
+
+
+/* vi_prev_word():
+ *	Vi move to the previous word
+ *	[b]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor == el->el_line.buffer)
+		return CC_ERROR;
+
+	el->el_line.cursor = cv_prev_word(el->el_line.cursor,
+	    el->el_line.buffer,
+	    el->el_state.argument,
+	    cv__isword);
+
+	if (el->el_chared.c_vcmd.action != NOP) {
+		cv_delfini(el);
+		return CC_REFRESH;
+	}
+	return CC_CURSOR;
+}
+
+
+/* vi_next_big_word():
+ *	Vi move to the next space delimited word
+ *	[W]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_next_big_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor >= el->el_line.lastchar - 1)
+		return CC_ERROR;
+
+	el->el_line.cursor = cv_next_word(el, el->el_line.cursor,
+	    el->el_line.lastchar, el->el_state.argument, cv__isWord);
+
+	if (el->el_map.type == MAP_VI)
+		if (el->el_chared.c_vcmd.action != NOP) {
+			cv_delfini(el);
+			return CC_REFRESH;
+		}
+	return CC_CURSOR;
+}
+
+
+/* vi_next_word():
+ *	Vi move to the next word
+ *	[w]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_next_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor >= el->el_line.lastchar - 1)
+		return CC_ERROR;
+
+	el->el_line.cursor = cv_next_word(el, el->el_line.cursor,
+	    el->el_line.lastchar, el->el_state.argument, cv__isword);
+
+	if (el->el_map.type == MAP_VI)
+		if (el->el_chared.c_vcmd.action != NOP) {
+			cv_delfini(el);
+			return CC_REFRESH;
+		}
+	return CC_CURSOR;
+}
+
+
+/* vi_change_case():
+ *	Vi change case of character under the cursor and advance one character
+ *	[~]
+ */
+protected el_action_t
+vi_change_case(EditLine *el, Int c)
+{
+	int i;
+
+	if (el->el_line.cursor >= el->el_line.lastchar)
+		return CC_ERROR;
+	cv_undo(el);
+	for (i = 0; i < el->el_state.argument; i++) {
+
+		c = *el->el_line.cursor;
+		if (Isupper(c))
+			*el->el_line.cursor = Tolower(c);
+		else if (Islower(c))
+			*el->el_line.cursor = Toupper(c);
+
+		if (++el->el_line.cursor >= el->el_line.lastchar) {
+			el->el_line.cursor--;
+			re_fastaddc(el);
+			break;
+		}
+		re_fastaddc(el);
+	}
+	return CC_NORM;
+}
+
+
+/* vi_change_meta():
+ *	Vi change prefix command
+ *	[c]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_change_meta(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	/*
+         * Delete with insert == change: first we delete and then we leave in
+         * insert mode.
+         */
+	return cv_action(el, DELETE | INSERT);
+}
+
+
+/* vi_insert_at_bol():
+ *	Vi enter insert mode at the beginning of line
+ *	[I]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_insert_at_bol(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_line.cursor = el->el_line.buffer;
+	cv_undo(el);
+	el->el_map.current = el->el_map.key;
+	return CC_CURSOR;
+}
+
+
+/* vi_replace_char():
+ *	Vi replace character under the cursor with the next character typed
+ *	[r]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_replace_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor >= el->el_line.lastchar)
+		return CC_ERROR;
+
+	el->el_map.current = el->el_map.key;
+	el->el_state.inputmode = MODE_REPLACE_1;
+	cv_undo(el);
+	return CC_ARGHACK;
+}
+
+
+/* vi_replace_mode():
+ *	Vi enter replace mode
+ *	[R]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_replace_mode(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_map.current = el->el_map.key;
+	el->el_state.inputmode = MODE_REPLACE;
+	cv_undo(el);
+	return CC_NORM;
+}
+
+
+/* vi_substitute_char():
+ *	Vi replace character under the cursor and enter insert mode
+ *	[s]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_substitute_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	c_delafter(el, el->el_state.argument);
+	el->el_map.current = el->el_map.key;
+	return CC_REFRESH;
+}
+
+
+/* vi_substitute_line():
+ *	Vi substitute entire line
+ *	[S]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_substitute_line(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	cv_undo(el);
+	cv_yank(el, el->el_line.buffer,
+	    (int)(el->el_line.lastchar - el->el_line.buffer));
+	(void) em_kill_line(el, 0);
+	el->el_map.current = el->el_map.key;
+	return CC_REFRESH;
+}
+
+
+/* vi_change_to_eol():
+ *	Vi change to end of line
+ *	[C]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_change_to_eol(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	cv_undo(el);
+	cv_yank(el, el->el_line.cursor,
+	    (int)(el->el_line.lastchar - el->el_line.cursor));
+	(void) ed_kill_line(el, 0);
+	el->el_map.current = el->el_map.key;
+	return CC_REFRESH;
+}
+
+
+/* vi_insert():
+ *	Vi enter insert mode
+ *	[i]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_insert(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_map.current = el->el_map.key;
+	cv_undo(el);
+	return CC_NORM;
+}
+
+
+/* vi_add():
+ *	Vi enter insert mode after the cursor
+ *	[a]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_add(EditLine *el, Int c __attribute__((__unused__)))
+{
+	int ret;
+
+	el->el_map.current = el->el_map.key;
+	if (el->el_line.cursor < el->el_line.lastchar) {
+		el->el_line.cursor++;
+		if (el->el_line.cursor > el->el_line.lastchar)
+			el->el_line.cursor = el->el_line.lastchar;
+		ret = CC_CURSOR;
+	} else
+		ret = CC_NORM;
+
+	cv_undo(el);
+
+	return (el_action_t)ret;
+}
+
+
+/* vi_add_at_eol():
+ *	Vi enter insert mode at end of line
+ *	[A]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_add_at_eol(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_map.current = el->el_map.key;
+	el->el_line.cursor = el->el_line.lastchar;
+	cv_undo(el);
+	return CC_CURSOR;
+}
+
+
+/* vi_delete_meta():
+ *	Vi delete prefix command
+ *	[d]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_delete_meta(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	return cv_action(el, DELETE);
+}
+
+
+/* vi_end_big_word():
+ *	Vi move to the end of the current space delimited word
+ *	[E]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_end_big_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor == el->el_line.lastchar)
+		return CC_ERROR;
+
+	el->el_line.cursor = cv__endword(el->el_line.cursor,
+	    el->el_line.lastchar, el->el_state.argument, cv__isWord);
+
+	if (el->el_chared.c_vcmd.action != NOP) {
+		el->el_line.cursor++;
+		cv_delfini(el);
+		return CC_REFRESH;
+	}
+	return CC_CURSOR;
+}
+
+
+/* vi_end_word():
+ *	Vi move to the end of the current word
+ *	[e]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_end_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor == el->el_line.lastchar)
+		return CC_ERROR;
+
+	el->el_line.cursor = cv__endword(el->el_line.cursor,
+	    el->el_line.lastchar, el->el_state.argument, cv__isword);
+
+	if (el->el_chared.c_vcmd.action != NOP) {
+		el->el_line.cursor++;
+		cv_delfini(el);
+		return CC_REFRESH;
+	}
+	return CC_CURSOR;
+}
+
+
+/* vi_undo():
+ *	Vi undo last change
+ *	[u]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_undo(EditLine *el, Int c __attribute__((__unused__)))
+{
+	c_undo_t un = el->el_chared.c_undo;
+
+	if (un.len == -1)
+		return CC_ERROR;
+
+	/* switch line buffer and undo buffer */
+	el->el_chared.c_undo.buf = el->el_line.buffer;
+	el->el_chared.c_undo.len = el->el_line.lastchar - el->el_line.buffer;
+	el->el_chared.c_undo.cursor =
+	    (int)(el->el_line.cursor - el->el_line.buffer);
+	el->el_line.limit = un.buf + (el->el_line.limit - el->el_line.buffer);
+	el->el_line.buffer = un.buf;
+	el->el_line.cursor = un.buf + un.cursor;
+	el->el_line.lastchar = un.buf + un.len;
+
+	return CC_REFRESH;
+}
+
+
+/* vi_command_mode():
+ *	Vi enter command mode (use alternative key bindings)
+ *	[<ESC>]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_command_mode(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	/* [Esc] cancels pending action */
+	el->el_chared.c_vcmd.action = NOP;
+	el->el_chared.c_vcmd.pos = 0;
+
+	el->el_state.doingarg = 0;
+
+	el->el_state.inputmode = MODE_INSERT;
+	el->el_map.current = el->el_map.alt;
+#ifdef VI_MOVE
+	if (el->el_line.cursor > el->el_line.buffer)
+		el->el_line.cursor--;
+#endif
+	return CC_CURSOR;
+}
+
+
+/* vi_zero():
+ *	Vi move to the beginning of line
+ *	[0]
+ */
+protected el_action_t
+vi_zero(EditLine *el, Int c)
+{
+
+	if (el->el_state.doingarg)
+		return ed_argument_digit(el, c);
+
+	el->el_line.cursor = el->el_line.buffer;
+	if (el->el_chared.c_vcmd.action != NOP) {
+		cv_delfini(el);
+		return CC_REFRESH;
+	}
+	return CC_CURSOR;
+}
+
+
+/* vi_delete_prev_char():
+ * 	Vi move to previous character (backspace)
+ *	[^H] in insert mode only
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_delete_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_line.cursor <= el->el_line.buffer)
+		return CC_ERROR;
+
+	c_delbefore1(el);
+	el->el_line.cursor--;
+	return CC_REFRESH;
+}
+
+
+/* vi_list_or_eof():
+ *	Vi list choices for completion or indicate end of file if empty line
+ *	[^D]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_list_or_eof(EditLine *el, Int c)
+{
+
+	if (el->el_line.cursor == el->el_line.lastchar) {
+		if (el->el_line.cursor == el->el_line.buffer) {
+			terminal_writec(el, c);	/* then do a EOF */
+			return CC_EOF;
+		} else {
+			/*
+			 * Here we could list completions, but it is an
+			 * error right now
+			 */
+			terminal_beep(el);
+			return CC_ERROR;
+		}
+	} else {
+#ifdef notyet
+		re_goto_bottom(el);
+		*el->el_line.lastchar = '\0';	/* just in case */
+		return CC_LIST_CHOICES;
+#else
+		/*
+		 * Just complain for now.
+		 */
+		terminal_beep(el);
+		return CC_ERROR;
+#endif
+	}
+}
+
+
+/* vi_kill_line_prev():
+ *	Vi cut from beginning of line to cursor
+ *	[^U]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_kill_line_prev(EditLine *el, Int c __attribute__((__unused__)))
+{
+	Char *kp, *cp;
+
+	cp = el->el_line.buffer;
+	kp = el->el_chared.c_kill.buf;
+	while (cp < el->el_line.cursor)
+		*kp++ = *cp++;	/* copy it */
+	el->el_chared.c_kill.last = kp;
+	c_delbefore(el, (int)(el->el_line.cursor - el->el_line.buffer));
+	el->el_line.cursor = el->el_line.buffer;	/* zap! */
+	return CC_REFRESH;
+}
+
+
+/* vi_search_prev():
+ *	Vi search history previous
+ *	[?]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_search_prev(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	return cv_search(el, ED_SEARCH_PREV_HISTORY);
+}
+
+
+/* vi_search_next():
+ *	Vi search history next
+ *	[/]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_search_next(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	return cv_search(el, ED_SEARCH_NEXT_HISTORY);
+}
+
+
+/* vi_repeat_search_next():
+ *	Vi repeat current search in the same search direction
+ *	[n]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_repeat_search_next(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_search.patlen == 0)
+		return CC_ERROR;
+	else
+		return cv_repeat_srch(el, el->el_search.patdir);
+}
+
+
+/* vi_repeat_search_prev():
+ *	Vi repeat current search in the opposite search direction
+ *	[N]
+ */
+/*ARGSUSED*/
+protected el_action_t
+vi_repeat_search_prev(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	if (el->el_search.patlen == 0)
+		return CC_ERROR;
+	else
+		return (cv_repeat_srch(el,
+		    el->el_search.patdir == ED_SEARCH_PREV_HISTORY ?
+		    ED_SEARCH_NEXT_HISTORY : ED_SEARCH_PREV_HISTORY));
+}
+
+
+/* vi_next_char():
+ *	Vi move to the character specified next
+ *	[f]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_next_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+	return cv_csearch(el, CHAR_FWD, -1, el->el_state.argument, 0);
+}
+
+
+/* vi_prev_char():
+ *	Vi move to the character specified previous
+ *	[F]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+	return cv_csearch(el, CHAR_BACK, -1, el->el_state.argument, 0);
+}
+
+
+/* vi_to_next_char():
+ *	Vi move up to the character specified next
+ *	[t]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_to_next_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+	return cv_csearch(el, CHAR_FWD, -1, el->el_state.argument, 1);
+}
+
+
+/* vi_to_prev_char():
+ *	Vi move up to the character specified previous
+ *	[T]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_to_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+	return cv_csearch(el, CHAR_BACK, -1, el->el_state.argument, 1);
+}
+
+
+/* vi_repeat_next_char():
+ *	Vi repeat current character search in the same search direction
+ *	[;]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_repeat_next_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	return cv_csearch(el, el->el_search.chadir, el->el_search.chacha,
+		el->el_state.argument, el->el_search.chatflg);
+}
+
+
+/* vi_repeat_prev_char():
+ *	Vi repeat current character search in the opposite search direction
+ *	[,]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_repeat_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+{
+	el_action_t r;
+	int dir = el->el_search.chadir;
+
+	r = cv_csearch(el, -dir, el->el_search.chacha,
+		el->el_state.argument, el->el_search.chatflg);
+	el->el_search.chadir = dir;
+	return r;
+}
+
+
+/* vi_match():
+ *	Vi go to matching () {} or []
+ *	[%]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_match(EditLine *el, Int c __attribute__((__unused__)))
+{
+	const Char match_chars[] = STR("()[]{}");
+	Char *cp;
+	size_t delta, i, count;
+	Char o_ch, c_ch;
+
+	*el->el_line.lastchar = '\0';		/* just in case */
+
+	i = Strcspn(el->el_line.cursor, match_chars);
+	o_ch = el->el_line.cursor[i];
+	if (o_ch == 0)
+		return CC_ERROR;
+	delta = (size_t)(Strchr(match_chars, o_ch) - match_chars);
+	c_ch = match_chars[delta ^ 1];
+	count = 1;
+	delta = 1 - (delta & 1) * 2;
+
+	for (cp = &el->el_line.cursor[i]; count; ) {
+		cp += delta;
+		if (cp < el->el_line.buffer || cp >= el->el_line.lastchar)
+			return CC_ERROR;
+		if (*cp == o_ch)
+			count++;
+		else if (*cp == c_ch)
+			count--;
+	}
+
+	el->el_line.cursor = cp;
+
+	if (el->el_chared.c_vcmd.action != NOP) {
+		/* NB posix says char under cursor should NOT be deleted
+		   for -ve delta - this is different to netbsd vi. */
+		if (delta > 0)
+			el->el_line.cursor++;
+		cv_delfini(el);
+		return CC_REFRESH;
+	}
+	return CC_CURSOR;
+}
+
+/* vi_undo_line():
+ *	Vi undo all changes to line
+ *	[U]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_undo_line(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	cv_undo(el);
+	return hist_get(el);
+}
+
+/* vi_to_column():
+ *	Vi go to specified column
+ *	[|]
+ * NB netbsd vi goes to screen column 'n', posix says nth character
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_to_column(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_line.cursor = el->el_line.buffer;
+	el->el_state.argument--;
+	return ed_next_char(el, 0);
+}
+
+/* vi_yank_end():
+ *	Vi yank to end of line
+ *	[Y]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_yank_end(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	cv_yank(el, el->el_line.cursor,
+	    (int)(el->el_line.lastchar - el->el_line.cursor));
+	return CC_REFRESH;
+}
+
+/* vi_yank():
+ *	Vi yank
+ *	[y]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_yank(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	return cv_action(el, YANK);
+}
+
+/* vi_comment_out():
+ *	Vi comment out current command
+ *	[#]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_comment_out(EditLine *el, Int c __attribute__((__unused__)))
+{
+
+	el->el_line.cursor = el->el_line.buffer;
+	c_insert(el, 1);
+	*el->el_line.cursor = '#';
+	re_refresh(el);
+	return ed_newline(el, 0);
+}
+
+/* vi_alias():
+ *	Vi include shell alias
+ *	[@]
+ * NB: posix implies that we should enter insert mode, however
+ * this is against historical precedent...
+ */
+#ifdef __weak_reference
+__weakref_visible char *my_get_alias_text(const char *)
+    __weak_reference(get_alias_text);
+#endif
+protected el_action_t
+/*ARGSUSED*/
+vi_alias(EditLine *el __attribute__((__unused__)), Int c __attribute__((__unused__)))
+{
+#ifdef __weak_reference
+	char alias_name[3];
+	char *alias_text;
+
+	if (my_get_alias_text == 0) {
+		return CC_ERROR;
+	}
+
+	alias_name[0] = '_';
+	alias_name[2] = 0;
+	if (el_getc(el, &alias_name[1]) != 1)
+		return CC_ERROR;
+
+	alias_text = my_get_alias_text(alias_name);
+	if (alias_text != NULL)
+		FUN(el,push)(el, ct_decode_string(alias_text, &el->el_scratch));
+	return CC_NORM;
+#else
+	return CC_ERROR;
+#endif
+}
+
+/* vi_to_history_line():
+ *	Vi go to specified history file line.
+ *	[G]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_to_history_line(EditLine *el, Int c __attribute__((__unused__)))
+{
+	int sv_event_no = el->el_history.eventno;
+	el_action_t rval;
+
+
+	if (el->el_history.eventno == 0) {
+		 (void) Strncpy(el->el_history.buf, el->el_line.buffer,
+		     EL_BUFSIZ);
+		 el->el_history.last = el->el_history.buf +
+			 (el->el_line.lastchar - el->el_line.buffer);
+	}
+
+	/* Lack of a 'count' means oldest, not 1 */
+	if (!el->el_state.doingarg) {
+		el->el_history.eventno = 0x7fffffff;
+		hist_get(el);
+	} else {
+		/* This is brain dead, all the rest of this code counts
+		 * upwards going into the past.  Here we need count in the
+		 * other direction (to match the output of fc -l).
+		 * I could change the world, but this seems to suffice.
+		 */
+		el->el_history.eventno = 1;
+		if (hist_get(el) == CC_ERROR)
+			return CC_ERROR;
+		el->el_history.eventno = 1 + el->el_history.ev.num 
+					- el->el_state.argument;
+		if (el->el_history.eventno < 0) {
+			el->el_history.eventno = sv_event_no;
+			return CC_ERROR;
+		}
+	}
+	rval = hist_get(el);
+	if (rval == CC_ERROR)
+		el->el_history.eventno = sv_event_no;
+	return rval;
+}
+
+/* vi_histedit():
+ *	Vi edit history line with vi
+ *	[v]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_histedit(EditLine *el, Int c __attribute__((__unused__)))
+{
+	int fd;
+	pid_t pid;
+	ssize_t st;
+	int status;
+	char tempfile[] = "/tmp/histedit.XXXXXXXXXX";
+	char *cp = NULL;
+	size_t len;
+	Char *line = NULL;
+
+	if (el->el_state.doingarg) {
+		if (vi_to_history_line(el, 0) == CC_ERROR)
+			return CC_ERROR;
+	}
+
+	fd = mkstemp(tempfile);
+	if (fd < 0)
+		return CC_ERROR;
+	len = (size_t)(el->el_line.lastchar - el->el_line.buffer);
+#define TMP_BUFSIZ (EL_BUFSIZ * MB_LEN_MAX)
+	cp = el_malloc(TMP_BUFSIZ * sizeof(*cp));
+	if (cp == NULL)
+		goto error;
+	line = el_malloc(len * sizeof(*line) + 1);
+	if (line == NULL)
+		goto error;
+	Strncpy(line, el->el_line.buffer, len);
+	line[len] = '\0';
+	ct_wcstombs(cp, line, TMP_BUFSIZ - 1);
+	cp[TMP_BUFSIZ - 1] = '\0';
+	len = strlen(cp);
+	write(fd, cp, len);
+	write(fd, "\n", (size_t)1);
+	pid = fork();
+	switch (pid) {
+	case -1:
+		goto error;
+	case 0:
+		close(fd);
+		execlp("vi", "vi", tempfile, (char *)NULL);
+		exit(0);
+		/*NOTREACHED*/
+	default:
+		while (waitpid(pid, &status, 0) != pid)
+			continue;
+		lseek(fd, (off_t)0, SEEK_SET);
+		st = read(fd, cp, TMP_BUFSIZ);
+		if (st > 0) {
+			len = (size_t)(el->el_line.lastchar -
+			    el->el_line.buffer);
+			len = ct_mbstowcs(el->el_line.buffer, cp, len);
+			if (len > 0 && el->el_line.buffer[len -1] == '\n')
+				--len;
+		}
+		else
+			len = 0;
+                el->el_line.cursor = el->el_line.buffer;
+                el->el_line.lastchar = el->el_line.buffer + len;
+		el_free(cp);
+                el_free(line);
+		break;
+	}
+
+	close(fd);
+	unlink(tempfile);
+	/* return CC_REFRESH; */
+	return ed_newline(el, 0);
+error:
+	el_free(line);
+	el_free(cp);
+	close(fd);
+	unlink(tempfile);
+	return CC_ERROR;
+}
+
+/* vi_history_word():
+ *	Vi append word from previous input line
+ *	[_]
+ * Who knows where this one came from!
+ * '_' in vi means 'entire current line', so 'cc' is a synonym for 'c_'
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_history_word(EditLine *el, Int c __attribute__((__unused__)))
+{
+	const Char *wp = HIST_FIRST(el);
+	const Char *wep, *wsp;
+	int len;
+	Char *cp;
+	const Char *lim;
+
+	if (wp == NULL)
+		return CC_ERROR;
+
+	wep = wsp = 0;
+	do {
+		while (Isspace(*wp))
+			wp++;
+		if (*wp == 0)
+			break;
+		wsp = wp;
+		while (*wp && !Isspace(*wp))
+			wp++;
+		wep = wp;
+	} while ((!el->el_state.doingarg || --el->el_state.argument > 0)
+	    && *wp != 0);
+
+	if (wsp == 0 || (el->el_state.doingarg && el->el_state.argument != 0))
+		return CC_ERROR;
+
+	cv_undo(el);
+	len = (int)(wep - wsp);
+	if (el->el_line.cursor < el->el_line.lastchar)
+		el->el_line.cursor++;
+	c_insert(el, len + 1);
+	cp = el->el_line.cursor;
+	lim = el->el_line.limit;
+	if (cp < lim)
+		*cp++ = ' ';
+	while (wsp < wep && cp < lim)
+		*cp++ = *wsp++;
+	el->el_line.cursor = cp;
+
+	el->el_map.current = el->el_map.key;
+	return CC_REFRESH;
+}
+
+/* vi_redo():
+ *	Vi redo last non-motion command
+ *	[.]
+ */
+protected el_action_t
+/*ARGSUSED*/
+vi_redo(EditLine *el, Int c __attribute__((__unused__)))
+{
+	c_redo_t *r = &el->el_chared.c_redo;
+
+	if (!el->el_state.doingarg && r->count) {
+		el->el_state.doingarg = 1;
+		el->el_state.argument = r->count;
+	}
+
+	el->el_chared.c_vcmd.pos = el->el_line.cursor;
+	el->el_chared.c_vcmd.action = r->action;
+	if (r->pos != r->buf) {
+		if (r->pos + 1 > r->lim)
+			/* sanity */
+			r->pos = r->lim - 1;
+		r->pos[0] = 0;
+		FUN(el,push)(el, r->buf);
+	}
+
+	el->el_state.thiscmd = r->cmd;
+	el->el_state.thisch = r->ch;
+	return (*el->el_map.func[r->cmd])(el, r->ch);
+}
diff --git a/src/vis.c b/src/vis.c
new file mode 100644
index 0000000..880eacb
--- /dev/null
+++ b/src/vis.c
@@ -0,0 +1,689 @@
+/*	$NetBSD: vis.c,v 1.60 2013/02/21 16:21:20 joerg Exp $	*/
+
+/*-
+ * Copyright (c) 1989, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*-
+ * Copyright (c) 1999, 2005 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "config.h"
+
+#if defined(LIBC_SCCS) && !defined(lint)
+__RCSID("$NetBSD: vis.c,v 1.60 2013/02/21 16:21:20 joerg Exp $");
+#endif /* LIBC_SCCS and not lint */
+#ifdef __FBSDID
+__FBSDID("$FreeBSD$");
+#endif
+
+#include <sys/types.h>
+#include <sys/param.h>
+
+#include <stdint.h>
+#include <assert.h>
+#include <vis.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <wchar.h>
+#include <wctype.h>
+
+#ifdef __weak_alias
+__weak_alias(strvisx,_strvisx)
+#endif
+
+#if !HAVE_VIS || !HAVE_SVIS
+#include <ctype.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+
+/*
+ * The reason for going through the trouble to deal with character encodings
+ * in vis(3), is that we use this to safe encode output of commands. This
+ * safe encoding varies depending on the character set. For example if we
+ * display ps output in French, we don't want to display French characters
+ * as M-foo.
+ */
+
+static wchar_t *do_svis(wchar_t *, wint_t, int, wint_t, const wchar_t *);
+
+#undef BELL
+#define BELL L'\a'
+
+#define iswoctal(c)	(((u_char)(c)) >= L'0' && ((u_char)(c)) <= L'7')
+#define iswwhite(c)	(c == L' ' || c == L'\t' || c == L'\n')
+#define iswsafe(c)	(c == L'\b' || c == BELL || c == L'\r')
+#define xtoa(c)		L"0123456789abcdef"[c]
+#define XTOA(c)		L"0123456789ABCDEF"[c]
+
+#define MAXEXTRAS	10
+
+#if !HAVE_NBTOOL_CONFIG_H
+#ifndef __NetBSD__
+/*
+ * On NetBSD MB_LEN_MAX is currently 32 which does not fit on any integer
+ * integral type and it is probably wrong, since currently the maximum
+ * number of bytes and character needs is 6. Until this is fixed, the
+ * loops below are using sizeof(uint64_t) - 1 instead of MB_LEN_MAX, and
+ * the assertion is commented out.
+ */
+#ifdef __FreeBSD__
+/*
+ * On FreeBSD including <sys/systm.h> for CTASSERT only works in kernel
+ * mode.
+ */
+#ifndef CTASSERT
+#define CTASSERT(x)             _CTASSERT(x, __LINE__)
+#define _CTASSERT(x, y)         __CTASSERT(x, y)
+#define __CTASSERT(x, y)        typedef char __assert ## y[(x) ? 1 : -1]
+#endif
+#endif /* __FreeBSD__ */
+/*
+CTASSERT(MB_LEN_MAX <= sizeof(uint64_t));
+*/
+#endif /* !__NetBSD__ */
+#endif
+
+/*
+ * This is do_hvis, for HTTP style (RFC 1808)
+ */
+static wchar_t *
+do_hvis(wchar_t *dst, wint_t c, int flags, wint_t nextc, const wchar_t *extra)
+{
+	if (iswalnum(c)
+	    /* safe */
+	    || c == L'$' || c == L'-' || c == L'_' || c == L'.' || c == L'+'
+	    /* extra */
+	    || c == L'!' || c == L'*' || c == L'\'' || c == L'(' || c == L')'
+	    || c == L',')
+		dst = do_svis(dst, c, flags, nextc, extra);
+	else {
+		*dst++ = L'%';
+		*dst++ = xtoa(((unsigned int)c >> 4) & 0xf);
+		*dst++ = xtoa((unsigned int)c & 0xf);
+	}
+
+	return dst;
+}
+
+/*
+ * This is do_mvis, for Quoted-Printable MIME (RFC 2045)
+ * NB: No handling of long lines or CRLF.
+ */
+static wchar_t *
+do_mvis(wchar_t *dst, wint_t c, int flags, wint_t nextc, const wchar_t *extra)
+{
+	if ((c != L'\n') &&
+	    /* Space at the end of the line */
+	    ((iswspace(c) && (nextc == L'\r' || nextc == L'\n')) ||
+	    /* Out of range */
+	    (!iswspace(c) && (c < 33 || (c > 60 && c < 62) || c > 126)) ||
+	    /* Specific char to be escaped */
+	    wcschr(L"#$@[\\]^`{|}~", c) != NULL)) {
+		*dst++ = L'=';
+		*dst++ = XTOA(((unsigned int)c >> 4) & 0xf);
+		*dst++ = XTOA((unsigned int)c & 0xf);
+	} else
+		dst = do_svis(dst, c, flags, nextc, extra);
+	return dst;
+}
+
+/*
+ * Output single byte of multibyte character.
+ */
+static wchar_t *
+do_mbyte(wchar_t *dst, wint_t c, int flags, wint_t nextc, int iswextra)
+{
+	if (flags & VIS_CSTYLE) {
+		switch (c) {
+		case L'\n':
+			*dst++ = L'\\'; *dst++ = L'n';
+			return dst;
+		case L'\r':
+			*dst++ = L'\\'; *dst++ = L'r';
+			return dst;
+		case L'\b':
+			*dst++ = L'\\'; *dst++ = L'b';
+			return dst;
+		case BELL:
+			*dst++ = L'\\'; *dst++ = L'a';
+			return dst;
+		case L'\v':
+			*dst++ = L'\\'; *dst++ = L'v';
+			return dst;
+		case L'\t':
+			*dst++ = L'\\'; *dst++ = L't';
+			return dst;
+		case L'\f':
+			*dst++ = L'\\'; *dst++ = L'f';
+			return dst;
+		case L' ':
+			*dst++ = L'\\'; *dst++ = L's';
+			return dst;
+		case L'\0':
+			*dst++ = L'\\'; *dst++ = L'0';
+			if (iswoctal(nextc)) {
+				*dst++ = L'0';
+				*dst++ = L'0';
+			}
+			return dst;
+		default:
+			if (iswgraph(c)) {
+				*dst++ = L'\\';
+				*dst++ = c;
+				return dst;
+			}
+		}
+	}
+	if (iswextra || ((c & 0177) == L' ') || (flags & VIS_OCTAL)) {
+		*dst++ = L'\\';
+		*dst++ = (u_char)(((u_int32_t)(u_char)c >> 6) & 03) + L'0';
+		*dst++ = (u_char)(((u_int32_t)(u_char)c >> 3) & 07) + L'0';
+		*dst++ =			     (c	      & 07) + L'0';
+	} else {
+		if ((flags & VIS_NOSLASH) == 0)
+			*dst++ = L'\\';
+
+		if (c & 0200) {
+			c &= 0177;
+			*dst++ = L'M';
+		}
+
+		if (iswcntrl(c)) {
+			*dst++ = L'^';
+			if (c == 0177)
+				*dst++ = L'?';
+			else
+				*dst++ = c + L'@';
+		} else {
+			*dst++ = L'-';
+			*dst++ = c;
+		}
+	}
+
+	return dst;
+}
+
+/*
+ * This is do_vis, the central code of vis.
+ * dst:	      Pointer to the destination buffer
+ * c:	      Character to encode
+ * flags:     Flags word
+ * nextc:     The character following 'c'
+ * extra:     Pointer to the list of extra characters to be
+ *	      backslash-protected.
+ */
+static wchar_t *
+do_svis(wchar_t *dst, wint_t c, int flags, wint_t nextc, const wchar_t *extra)
+{
+	int iswextra, i, shft;
+	uint64_t bmsk, wmsk;
+
+	iswextra = wcschr(extra, c) != NULL;
+	if (!iswextra && (iswgraph(c) || iswwhite(c) ||
+	    ((flags & VIS_SAFE) && iswsafe(c)))) {
+		*dst++ = c;
+		return dst;
+	}
+
+	/* See comment in istrsenvisx() output loop, below. */
+	wmsk = 0;
+	for (i = sizeof(wmsk) - 1; i >= 0; i--) {
+		shft = i * NBBY;
+		bmsk = (uint64_t)0xffLL << shft;
+		wmsk |= bmsk;
+		if ((c & wmsk) || i == 0)
+			dst = do_mbyte(dst, (wint_t)(
+			    (uint64_t)(c & bmsk) >> shft),
+			    flags, nextc, iswextra);
+	}
+
+	return dst;
+}
+
+typedef wchar_t *(*visfun_t)(wchar_t *, wint_t, int, wint_t, const wchar_t *);
+
+/*
+ * Return the appropriate encoding function depending on the flags given.
+ */
+static visfun_t
+getvisfun(int flags)
+{
+	if (flags & VIS_HTTPSTYLE)
+		return do_hvis;
+	if (flags & VIS_MIMESTYLE)
+		return do_mvis;
+	return do_svis;
+}
+
+/*
+ * Expand list of extra characters to not visually encode.
+ */
+static wchar_t *
+makeextralist(int flags, const char *src)
+{
+	wchar_t *dst, *d;
+	size_t len;
+
+	len = strlen(src);
+	if ((dst = calloc(len + MAXEXTRAS, sizeof(*dst))) == NULL)
+		return NULL;
+
+	if (mbstowcs(dst, src, len) == (size_t)-1) {
+		size_t i;
+		for (i = 0; i < len; i++)
+			dst[i] = (wint_t)(u_char)src[i];
+		d = dst + len;
+	} else
+		d = dst + wcslen(dst);
+
+	if (flags & VIS_GLOB) {
+		*d++ = L'*';
+		*d++ = L'?';
+		*d++ = L'[';
+		*d++ = L'#';
+	}
+
+	if (flags & VIS_SP) *d++ = L' ';
+	if (flags & VIS_TAB) *d++ = L'\t';
+	if (flags & VIS_NL) *d++ = L'\n';
+	if ((flags & VIS_NOSLASH) == 0) *d++ = L'\\';
+	*d = L'\0';
+
+	return dst;
+}
+
+/*
+ * istrsenvisx()
+ * 	The main internal function.
+ *	All user-visible functions call this one.
+ */
+static int
+istrsenvisx(char *mbdst, size_t *dlen, const char *mbsrc, size_t mblength,
+    int flags, const char *mbextra, int *cerr_ptr)
+{
+	wchar_t *dst, *src, *pdst, *psrc, *start, *extra;
+	size_t len, olen;
+	uint64_t bmsk, wmsk;
+	wint_t c;
+	visfun_t f;
+	int clen = 0, cerr = 0, error = -1, i, shft;
+	ssize_t mbslength, maxolen;
+
+	_DIAGASSERT(mbdst != NULL);
+	_DIAGASSERT(mbsrc != NULL);
+	_DIAGASSERT(mbextra != NULL);
+
+	/*
+	 * Input (mbsrc) is a char string considered to be multibyte
+	 * characters.  The input loop will read this string pulling
+	 * one character, possibly multiple bytes, from mbsrc and
+	 * converting each to wchar_t in src.
+	 *
+	 * The vis conversion will be done using the wide char
+	 * wchar_t string.
+	 *
+	 * This will then be converted back to a multibyte string to
+	 * return to the caller.
+	 */
+
+	/* Allocate space for the wide char strings */
+	psrc = pdst = extra = NULL;
+	if (!mblength)
+		mblength = strlen(mbsrc);
+	if ((psrc = calloc(mblength + 1, sizeof(*psrc))) == NULL)
+		return -1;
+	if ((pdst = calloc((4 * mblength) + 1, sizeof(*pdst))) == NULL)
+		goto out;
+	dst = pdst;
+	src = psrc;
+
+	/* Use caller's multibyte conversion error flag. */
+	if (cerr_ptr)
+		cerr = *cerr_ptr;
+
+	/*
+	 * Input loop.
+	 * Handle up to mblength characters (not bytes).  We do not
+	 * stop at NULs because we may be processing a block of data
+	 * that includes NULs.
+	 */
+	mbslength = (ssize_t)mblength;
+	/*
+	 * When inputing a single character, must also read in the
+	 * next character for nextc, the look-ahead character.
+	 */
+	if (mbslength == 1)
+		mbslength++;
+	while (mbslength > 0) {
+		/* Convert one multibyte character to wchar_t. */
+		if (!cerr)
+			clen = mbtowc(src, mbsrc, MB_LEN_MAX);
+		if (cerr || clen < 0) {
+			/* Conversion error, process as a byte instead. */
+			*src = (wint_t)(u_char)*mbsrc;
+			clen = 1;
+			cerr = 1;
+		}
+		if (clen == 0)
+			/*
+			 * NUL in input gives 0 return value. process
+			 * as single NUL byte and keep going.
+			 */
+			clen = 1;
+		/* Advance buffer character pointer. */
+		src++;
+		/* Advance input pointer by number of bytes read. */
+		mbsrc += clen;
+		/* Decrement input byte count. */
+		mbslength -= clen;
+	}
+	len = src - psrc;
+	src = psrc;
+	/*
+	 * In the single character input case, we will have actually
+	 * processed two characters, c and nextc.  Reset len back to
+	 * just a single character.
+	 */
+	if (mblength < len)
+		len = mblength;
+
+	/* Convert extra argument to list of characters for this mode. */
+	extra = makeextralist(flags, mbextra);
+	if (!extra) {
+		if (dlen && *dlen == 0) {
+			errno = ENOSPC;
+			goto out;
+		}
+		*mbdst = '\0';		/* can't create extra, return "" */
+		error = 0;
+		goto out;
+	}
+
+	/* Look up which processing function to call. */
+	f = getvisfun(flags);
+
+	/*
+	 * Main processing loop.
+	 * Call do_Xvis processing function one character at a time
+	 * with next character available for look-ahead.
+	 */
+	for (start = dst; len > 0; len--) {
+		c = *src++;
+		dst = (*f)(dst, c, flags, len >= 1 ? *src : L'\0', extra);
+		if (dst == NULL) {
+			errno = ENOSPC;
+			goto out;
+		}
+	}
+
+	/* Terminate the string in the buffer. */
+	*dst = L'\0';
+
+	/*
+	 * Output loop.
+	 * Convert wchar_t string back to multibyte output string.
+	 * If we have hit a multi-byte conversion error on input,
+	 * output byte-by-byte here.  Else use wctomb().
+	 */
+	len = wcslen(start);
+	maxolen = dlen ? *dlen : (wcslen(start) * MB_LEN_MAX + 1);
+	olen = 0;
+	for (dst = start; len > 0; len--) {
+		if (!cerr)
+			clen = wctomb(mbdst, *dst);
+		if (cerr || clen < 0) {
+			/*
+			 * Conversion error, process as a byte(s) instead.
+			 * Examine each byte and higher-order bytes for
+			 * data.  E.g.,
+			 *	0x000000000000a264 -> a2 64
+			 *	0x000000001f00a264 -> 1f 00 a2 64
+			 */
+			clen = 0;
+			wmsk = 0;
+			for (i = sizeof(wmsk) - 1; i >= 0; i--) {
+				shft = i * NBBY;
+				bmsk = (uint64_t)0xffLL << shft;
+				wmsk |= bmsk;
+				if ((*dst & wmsk) || i == 0)
+					mbdst[clen++] = (char)(
+					    (uint64_t)(*dst & bmsk) >>
+					    shft);
+			}
+			cerr = 1;
+		}
+		/* If this character would exceed our output limit, stop. */
+		if (olen + clen > (size_t)maxolen)
+			break;
+		/* Advance output pointer by number of bytes written. */
+		mbdst += clen;
+		/* Advance buffer character pointer. */
+		dst++;
+		/* Incrment output character count. */
+		olen += clen;
+	}
+
+	/* Terminate the output string. */
+	*mbdst = '\0';
+
+	/* Pass conversion error flag out. */
+	if (cerr_ptr)
+		*cerr_ptr = cerr;
+
+	free(extra);
+	free(pdst);
+	free(psrc);
+
+	return (int)olen;
+out:
+	free(extra);
+	free(pdst);
+	free(psrc);
+	return error;
+}
+#endif
+
+#if !HAVE_SVIS
+/*
+ *	The "svis" variants all take an "extra" arg that is a pointer
+ *	to a NUL-terminated list of characters to be encoded, too.
+ *	These functions are useful e. g. to encode strings in such a
+ *	way so that they are not interpreted by a shell.
+ */
+
+char *
+svis(char *mbdst, int c, int flags, int nextc, const char *mbextra)
+{
+	char cc[2];
+	int ret;
+
+	cc[0] = c;
+	cc[1] = nextc;
+
+	ret = istrsenvisx(mbdst, NULL, cc, 1, flags, mbextra, NULL);
+	if (ret < 0)
+		return NULL;
+	return mbdst + ret;
+}
+
+char *
+snvis(char *mbdst, size_t dlen, int c, int flags, int nextc, const char *mbextra)
+{
+	char cc[2];
+	int ret;
+
+	cc[0] = c;
+	cc[1] = nextc;
+
+	ret = istrsenvisx(mbdst, &dlen, cc, 1, flags, mbextra, NULL);
+	if (ret < 0)
+		return NULL;
+	return mbdst + ret;
+}
+
+int
+strsvis(char *mbdst, const char *mbsrc, int flags, const char *mbextra)
+{
+	return istrsenvisx(mbdst, NULL, mbsrc, 0, flags, mbextra, NULL);
+}
+
+int
+strsnvis(char *mbdst, size_t dlen, const char *mbsrc, int flags, const char *mbextra)
+{
+	return istrsenvisx(mbdst, &dlen, mbsrc, 0, flags, mbextra, NULL);
+}
+
+int
+strsvisx(char *mbdst, const char *mbsrc, size_t len, int flags, const char *mbextra)
+{
+	return istrsenvisx(mbdst, NULL, mbsrc, len, flags, mbextra, NULL);
+}
+
+int
+strsnvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags,
+    const char *mbextra)
+{
+	return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, mbextra, NULL);
+}
+
+int
+strsenvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags,
+    const char *mbextra, int *cerr_ptr)
+{
+	return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, mbextra, cerr_ptr);
+}
+#endif
+
+#if !HAVE_VIS
+/*
+ * vis - visually encode characters
+ */
+char *
+vis(char *mbdst, int c, int flags, int nextc)
+{
+	char cc[2];
+	int ret;
+
+	cc[0] = c;
+	cc[1] = nextc;
+
+	ret = istrsenvisx(mbdst, NULL, cc, 1, flags, "", NULL);
+	if (ret < 0)
+		return NULL;
+	return mbdst + ret;
+}
+
+char *
+nvis(char *mbdst, size_t dlen, int c, int flags, int nextc)
+{
+	char cc[2];
+	int ret;
+
+	cc[0] = c;
+	cc[1] = nextc;
+
+	ret = istrsenvisx(mbdst, &dlen, cc, 1, flags, "", NULL);
+	if (ret < 0)
+		return NULL;
+	return mbdst + ret;
+}
+
+/*
+ * strvis - visually encode characters from src into dst
+ *
+ *	Dst must be 4 times the size of src to account for possible
+ *	expansion.  The length of dst, not including the trailing NULL,
+ *	is returned.
+ */
+
+int
+strvis(char *mbdst, const char *mbsrc, int flags)
+{
+	return istrsenvisx(mbdst, NULL, mbsrc, 0, flags, "", NULL);
+}
+
+int
+strnvis(char *mbdst, size_t dlen, const char *mbsrc, int flags)
+{
+	return istrsenvisx(mbdst, &dlen, mbsrc, 0, flags, "", NULL);
+}
+
+/*
+ * strvisx - visually encode characters from src into dst
+ *
+ *	Dst must be 4 times the size of src to account for possible
+ *	expansion.  The length of dst, not including the trailing NULL,
+ *	is returned.
+ *
+ *	Strvisx encodes exactly len characters from src into dst.
+ *	This is useful for encoding a block of data.
+ */
+
+int
+strvisx(char *mbdst, const char *mbsrc, size_t len, int flags)
+{
+	return istrsenvisx(mbdst, NULL, mbsrc, len, flags, "", NULL);
+}
+
+int
+strnvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags)
+{
+	return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, "", NULL);
+}
+
+int
+strenvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags,
+    int *cerr_ptr)
+{
+	return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, "", cerr_ptr);
+}
+#endif
diff --git a/src/vis.h b/src/vis.h
new file mode 100644
index 0000000..93e758e
--- /dev/null
+++ b/src/vis.h
@@ -0,0 +1,112 @@
+/*	$NetBSD: vis.h,v 1.21 2013/02/20 17:01:15 christos Exp $	*/
+
+/*-
+ * Copyright (c) 1990, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)vis.h	8.1 (Berkeley) 6/2/93
+ */
+
+#ifndef _VIS_H_
+#define	_VIS_H_
+
+/*
+ * to select alternate encoding format
+ */
+#define	VIS_OCTAL	0x0001	/* use octal \ddd format */
+#define	VIS_CSTYLE	0x0002	/* use \[nrft0..] where appropiate */
+
+/*
+ * to alter set of characters encoded (default is to encode all
+ * non-graphic except space, tab, and newline).
+ */
+#define	VIS_SP		0x0004	/* also encode space */
+#define	VIS_TAB		0x0008	/* also encode tab */
+#define	VIS_NL		0x0010	/* also encode newline */
+#define	VIS_WHITE	(VIS_SP | VIS_TAB | VIS_NL)
+#define	VIS_SAFE	0x0020	/* only encode "unsafe" characters */
+
+/*
+ * other
+ */
+#define	VIS_NOSLASH	0x0040	/* inhibit printing '\' */
+#define	VIS_HTTP1808	0x0080	/* http-style escape % hex hex */
+#define	VIS_HTTPSTYLE	0x0080	/* http-style escape % hex hex */
+#define	VIS_MIMESTYLE	0x0100	/* mime-style escape = HEX HEX */
+#define	VIS_HTTP1866	0x0200	/* http-style &#num; or &string; */
+#define	VIS_NOESCAPE	0x0400	/* don't decode `\' */
+#define	_VIS_END	0x0800	/* for unvis */
+#define	VIS_GLOB	0x1000	/* encode glob(3) magic characters */
+
+/*
+ * unvis return codes
+ */
+#define	UNVIS_VALID	 1	/* character valid */
+#define	UNVIS_VALIDPUSH	 2	/* character valid, push back passed char */
+#define	UNVIS_NOCHAR	 3	/* valid sequence, no character produced */
+#define	UNVIS_SYNBAD	-1	/* unrecognized escape sequence */
+#define	UNVIS_ERROR	-2	/* decoder in unknown state (unrecoverable) */
+
+/*
+ * unvis flags
+ */
+#define	UNVIS_END	_VIS_END	/* no more characters */
+
+__BEGIN_DECLS
+char	*vis(char *, int, int, int);
+char	*nvis(char *, size_t, int, int, int);
+
+char	*svis(char *, int, int, int, const char *);
+char	*snvis(char *, size_t, int, int, int, const char *);
+
+int	strvis(char *, const char *, int);
+int	strnvis(char *, size_t, const char *, int);
+
+int	strsvis(char *, const char *, int, const char *);
+int	strsnvis(char *, size_t, const char *, int, const char *);
+
+int	strvisx(char *, const char *, size_t, int);
+int	strnvisx(char *, size_t, const char *, size_t, int);
+int 	strenvisx(char *, size_t, const char *, size_t, int, int *);
+
+int	strsvisx(char *, const char *, size_t, int, const char *);
+int	strsnvisx(char *, size_t, const char *, size_t, int, const char *);
+int	strsenvisx(char *, size_t, const char *, size_t , int, const char *,
+    int *);
+
+int	strunvis(char *, const char *);
+int	strnunvis(char *, size_t, const char *);
+
+int	strunvisx(char *, const char *, int);
+int	strnunvisx(char *, size_t, const char *, int);
+
+#ifndef __LIBC12_SOURCE__
+int	unvis(char *, int, int *, int);
+#endif
+__END_DECLS
+
+#endif /* !_VIS_H_ */
diff --git a/src/wcsdup.c b/src/wcsdup.c
new file mode 100644
index 0000000..2a77375
--- /dev/null
+++ b/src/wcsdup.c
@@ -0,0 +1,43 @@
+/*	$NetBSD: wcsdup.c,v 1.3 2008/05/26 13:17:48 haad Exp $	*/
+
+/*
+ * Copyright (C) 2006 Aleksey Cheusov
+ *
+ * This material is provided "as is", with absolutely no warranty expressed
+ * or implied. Any use is at your own risk.
+ *
+ * Permission to use or copy this software for any purpose is hereby granted 
+ * without fee. Permission to modify the code and to distribute modified
+ * code is also granted without any restrictions.
+ */
+
+#ifndef HAVE_WCSDUP
+
+#include "config.h"
+
+#if defined(LIBC_SCCS) && !defined(lint) 
+__RCSID("$NetBSD: wcsdup.c,v 1.3 2008/05/26 13:17:48 haad Exp $"); 
+#endif /* LIBC_SCCS and not lint */ 
+
+#include <stdlib.h>
+#include <assert.h>
+#include <wchar.h>
+
+wchar_t *
+wcsdup(const wchar_t *str)
+{
+	wchar_t *copy;
+	size_t len;
+
+	_DIAGASSERT(str != NULL);
+
+	len = wcslen(str) + 1;
+	copy = malloc(len * sizeof (wchar_t));
+
+	if (!copy)
+		return NULL;
+
+	return wmemcpy(copy, str, len);
+}
+
+#endif