Document: draft-cheshire-dnsext-dns-sd-02.txt            Stuart Cheshire
Category: Standards Track                           Apple Computer, Inc.
Expires 14th August 2004                                   Marc Krochmal
                                                    Apple Computer, Inc.
                                                      14th February 2004

                      DNS-Based Service Discovery

                 <draft-cheshire-dnsext-dns-sd-02.txt>


Status of this Memo

   This document is an Internet-Draft and is in full conformance with
   all provisions of Section 10 of RFC2026.  Internet-Drafts are
   working documents of the Internet Engineering Task Force (IETF),
   its areas, and its working groups.  Note that other groups may
   also distribute working documents as Internet-Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other documents
   at any time.  It is inappropriate to use Internet-Drafts as
   reference material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html

   Distribution of this memo is unlimited.


Abstract

   This document describes a convention for naming and structuring DNS
   resource records. Given a type of service that a client is looking
   for, and a domain in which the client is looking for that service,
   this convention allows clients to discover a list of named instances
   of that desired service, using only standard DNS queries. In short,
   this is referred to as DNS-based Service Discovery, or DNS-SD.


Expires 14th August 2004           Cheshire & Krochmal          [Page 1]

Internet Draft       DNS-Based Service Discovery      14th February 2004


Table of Contents

   1.  Introduction....................................................3
   2.  Conventions and Terminology Used in this Document...............3
   3.  Design Goals....................................................4
   4.  Service Instance Enumeration....................................5
   4.1 Structured Instance Names.......................................5
   4.2 User Interface Presentation.....................................7
   4.3 Internal Handling of Names......................................7
   4.4 What You See Is What You Get....................................7
   4.5 Ordering of Service Instance Name Components....................9
   5.  Service Name Resolution........................................11
   6.  Data Syntax for DNS-SD TXT Records.............................12
   6.1 General Format Rules for DNS TXT Records.......................12
   6.2 DNS TXT Record Format Rules for use in DNS-SD..................12
   6.3 DNS-SD TXT Record Size.........................................14
   6.4 Rules for Names in DNS-SD Name/Value Pairs.....................14
   6.5 Rules for Values in DNS-SD Name/Value Pairs....................16
   6.6 Example TXT Record.............................................16
   6.7 Version Tag....................................................17
   7.  Application Protocol Names.....................................18
   8.  Selective Instance Enumeration.................................19
   9.  Flagship Naming................................................10
   10. Service Type Enumeration.......................................21
   11. Populating the DNS with Information............................22
   12. Relationship to Multicast DNS..................................22
   13. Discovery of Browsing and Registration Domains.................23
   14. DNS Additional Record Generation...............................24
   15. Comparison with Alternative Service Discovery Protocols........25
   16. Real Example...................................................27
   17. IPv6 Considerations............................................28
   18. Security Considerations........................................28
   19. IANA Considerations............................................28
   20. Acknowledgements...............................................29
   21. Copyright......................................................29
   22. Normative References...........................................30
   23. Informative References.........................................30
   24. Author's Addresses.............................................31


Expires 14th August 2004           Cheshire & Krochmal          [Page 2]

Internet Draft       DNS-Based Service Discovery      14th February 2004


1. Introduction

   This document describes a convention for naming and structuring DNS
   resource records. Given a type of service that a client is looking
   for, and a domain in which the client is looking for that service,
   this convention allows clients to discover a list of named instances
   of a that desired service, using only standard DNS queries. In short,
   this is referred to as DNS-based Service Discovery, or DNS-SD.

   This document proposes no change to the structure of DNS messages,
   and no new operation codes, response codes, resource record types,
   or any other new DNS protocol values. This document simply proposes
   a convention for how existing resource record types can be named and
   structured to facilitate service discovery.

   This proposal is entirely compatible with today's existing unicast
   DNS server and client software.

   Note that the DNS-SD service does NOT have to be provided by the same
   DNS server hardware that is currently providing an organization's
   conventional host name lookup service (the service we traditionally
   think of when we say "DNS"). By delegating the "_tcp" subdomain, all
   the workload related to DNS-SD can be offloaded to a different
   machine. This flexibility, to handle DNS-SD on the main DNS server,
   or not, at the network administrator's discretion, is one of the
   things that makes DNS-SD so compelling.

   Even when the DNS-SD functions are delegated to a different machine,
   the benefits of using DNS remain: It is mature technology, well
   understood, with multiple independent implementations from different
   vendors, a wide selection of books published on the subject, and an
   established workforce experienced in its operation. In contrast,
   adopting some other service discovery technology would require every
   site in the world to install, learn, configure, operate and maintain
   some entirely new and unfamiliar server software. Faced with these
   obstacles, it seems unlikely that any other service discovery
   technology could hope to compete with the ubiquitous deployment
   that DNS already enjoys.

   This proposal is also compatible with (but not dependent on) the
   proposal outlined in "Multicast DNS" [mDNS].


2. Conventions and Terminology Used in this Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in "Key words for use in
   RFCs to Indicate Requirement Levels" [RFC 2119].


Expires 14th August 2004           Cheshire & Krochmal          [Page 3]

Internet Draft       DNS-Based Service Discovery      14th February 2004


3. Design Goals

   A good service discovery protocol needs to have many properties,
   three of which are mentioned below:

   (i) The ability to query for services of a certain type in a certain
   logical domain and receive in response a list of named instances
   (network browsing, or "Service Instance Enumeration").

   (ii) Given a particular named instance, the ability to efficiently
   resolve that instance name to the required information a client needs
   to actually use the service, i.e. IP address and port number, at the
   very least (Service Name Resolution).

   (iii) Instance names should be relatively persistent. If a user
   selects their default printer from a list of available choices today,
   then tomorrow they should still be able to print on that printer --
   even if the IP address and/or port number where the service resides
   have changed -- without the user (or their software) having to repeat
   the network browsing step a second time.

   In addition, if it is to become successful, a service discovery
   protocol should be so simple to implement that virtually any
   device capable of implementing IP should not have any trouble
   implementing the service discovery software as well.

   These goals are discussed in more detail in the remainder of this
   document. A more thorough treatment of service discovery requirements
   may be found in "Requirements for a Protocol to Replace AppleTalk
   NBP" [NBP]. That document draws upon examples from two decades of
   operational experience with AppleTalk Name Binding Protocol to
   develop a list of universal requirements which are broadly applicable
   to any potential service discovery protocol.


Expires 14th August 2004           Cheshire & Krochmal          [Page 4]

Internet Draft       DNS-Based Service Discovery      14th February 2004


4. Service Instance Enumeration

   DNS SRV records [RFC 2782] are useful for locating instances of a
   particular type of service when all the instances are effectively
   indistinguishable and provide the same service to the client.

   For example, SRV records with the (hypothetical) name
   "_http._tcp.example.com." would allow a client to discover a list of
   all servers implementing the "_http._tcp" service (i.e. Web servers)
   for the "example.com." domain. The unstated assumption is that all
   these servers offer an identical set of Web pages, and it doesn't
   matter to the client which of the servers it uses, as long as it
   selects one at random according to the weight and priority rules laid
   out in RFC 2782.

   Instances of other kinds of service are less easily interchangeable.
   If a word processing application were to look up the (hypothetical)
   SRV record "_ipp._tcp.example.com." to find the list of IPP printers
   at Example Co., then picking one at random and printing on it would
   probably not be what the user wanted.

   The remainder of this section describes how SRV records may be used
   in a slightly different way to allow a user to discover the names
   of all available instances of a given type of service, in order to
   select the particular instance the user desires.


4.1 Structured Instance Names

   This document borrows the logical service naming syntax and semantics
   from DNS SRV records, but adds one level of indirection. Instead of
   requesting records of type "SRV" with name "_ipp._tcp.example.com.",
   the client requests records of type "PTR" (pointer from one name to
   another in the DNS namespace).

   In effect, if one thinks of the domain name "_ipp._tcp.example.com."
   as being analogous to an absolute path to a directory in a file
   system then the PTR lookup is akin to performing a listing of that
   directory to find all the files it contains. (Remember that domain
   names are expressed in reverse order compared to path names: An
   absolute path name is read from left to right, beginning with a
   leading slash on the left, and then the top level directory, then the
   next level directory, and so on. A fully-qualified domain name is
   read from right to left, beginning with the dot on the right -- the
   root label -- and then the top level domain to the left of that, and
   the second level domain to the left of that, and so on. If the fully-
   qualified domain name "_ipp._tcp.example.com." were expressed as a
   file system path name, it would be "/com/example/_tcp/_ipp".)


Expires 14th August 2004           Cheshire & Krochmal          [Page 5]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   The result of this PTR lookup for the name "<Service>.<Domain>" is a
   list of zero or more PTR records giving Service Instance Names of the
   form:

      Service Instance Name = <Instance> . <Service> . <Domain>

   The <Instance> portion of the Service Instance Name is a single DNS
   label, containing arbitrary UTF-8-encoded text [RFC 2279]. It is a
   user-friendly name, meaning that it is allowed to contain any
   characters, without restriction, including spaces, upper case, lower
   case, punctuation -- including dots -- accented characters, non-roman
   text, and anything else that may be represented using UTF-8.
   DNS recommends guidelines for allowable characters for host names
   [RFC 1033][RFC 1034][RFC 1035], but Service Instance Names are not
   host names. Service Instance Names are not intended to ever be typed
   in by a normal user; the user selects a Service Instance Name by
   selecting it from a list of choices presented on the screen.

   Note that just because this protocol supports arbitrary UTF-8-encoded
   names doesn't mean that any particular user or administrator is
   obliged to make use of that capability. Any user is free, if they
   wish, to continue naming their services using only letters, digits
   and hyphens, with no spaces, capital letters, or other punctuation.

   DNS labels are currently limited to 63 octets in length. UTF-8
   encoding can require up to four octets per Unicode character, which
   means that in the worst case, the <Instance> portion of a name could
   be limited to fifteen Unicode characters. However, the Unicode
   characters with longer UTF-8 encodings tend to be the more obscure
   ones, and tend to be the ones that convey greater meaning per
   character.

   Note that any character in the commonly-used 16-bit Unicode space can
   be encoded with no more than three octets of UTF-8 encoding. This
   means that an Instance name can contain up to 21 Kanji characters,
   which is a sufficiently expressive name for most purposes.

   The <Service> portion of the Service Instance Name consists of a pair
   of DNS labels, following the established convention for SRV records
   [RFC 2782], namely: the first label of the service pair is the
   application protocol name, as recorded in the IANA list of assigned
   application protocol names and port numbers [ports]. The second label
   of the service pair is either "_tcp" or "_udp", depending on the
   transport protocol used by the application.

   The <Domain> portion of the Service Instance Name is a conventional
   DNS domain name, consisting of as many labels as appropriate. For
   example, "apple.com.", "cs.stanford.edu.", and "eng.us.ibm.com." are
   all valid domain names for the <Domain> portion of the Service
   Instance Name.


Expires 14th August 2004           Cheshire & Krochmal          [Page 6]

Internet Draft       DNS-Based Service Discovery      14th February 2004


4.2 User Interface Presentation

   The names resulting from the PTR lookup are presented to the user in
   a list for the user to select one (or more). Typically only the first
   label is shown (the user-friendly <Instance> portion of the name). In
   the common case, the <Service> and <Domain> are already known to the
   user, these having been provided by the user in the first place, by
   the act of indicating the service being sought, and the domain in
   which to look for it. Note: The software handling the response
   should be careful not to make invalid assumptions though, since it
   *is* possible, though rare, for a service enumeration in one domain
   to return the names of services in a different domain. Similarly,
   when using subtypes (see "Selective Instance Enumeration") the
   <Service> of the discovered instance my not be exactly the same as
   the <Service> that was requested.

   Having chosen the desired named instance, the Service Instance Name
   may then be used immediately, or saved away in some persistent
   user-preference data structure for future use, depending on what is
   appropriate for the application in question.


4.3 Internal Handling of Names

   If the <Instance>, <Service> and <Domain> portions are internally
   concatenated together into a single string, then care must be taken
   with the <Instance> portion, since it is allowed to contain any
   characters, including dots.

   Any dots in the <Instance> portion should be escaped by preceeding
   them with a backslash ("." becomes "\."). Likewise, any backslashes
   in the <Instance> portion should also be escaped by preceeding them
   with a backslash ("\" becomes "\\"). Having done this, the three
   components of the name may be safely concatenated. The
   backslash-escaping allows literal dots in the name (escaped) to be
   distinguished from label-separator dots (not escaped).

   The resulting concatenated string may be safely passed to standard
   DNS APIs like res_query(), which will interpret the string correctly
   provided it has been escaped correctly, as described here.


4.4 What You See Is What You Get

   Some service discovery protocols decouple the true service identifier
   from the name presented to the user. The true service identifier used
   by the protocol is an opaque unique id, often represented using a
   long string of hexadecimal digits, and should never be seen by the
   typical user. The name presented to the user is merely one of the
   ephemeral attributes attached to this opaque identifier.


Expires 14th August 2004           Cheshire & Krochmal          [Page 7]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   The problem with this approach is that it decouples user perception
   from reality:

   * What happens if there are two service instances, with different
     unique ids, but they have inadvertently been given the same
     user-visible name? If two instances appear in an on-screen list
     with the same name, how does the user know which is which?

   * Suppose a printer breaks down, and the user replaces it with
     another printer of the same make and model, and configures the new
     printer with the exact same name as the one being replaced:
     "Stuart's Printer". Now, when the user tries to print, the
     on-screen print dialog tells them that their selected default
     printer is "Stuart's Printer". When they browse the network to see
     what is there, they see a printer called "Stuart's Printer", yet
     when the user tries to print, they are told that the printer
     "Stuart's Printer" can't be found. The hidden internal unique id
     that the software is trying to find on the network doesn't match
     the hidden internal unique id of the new printer, even though its
     apparent "name" and its logical purpose for being there are the
     same. To remedy this, the user typically has to delete the print
     queue they have created, and then create a new (apparently
     identical) queue for the new printer, so that the new queue will
     contain the right hidden internal unique id. Having all this hidden
     information that the user can't see makes for a confusing and
     frustrating user experience, and exposing long ugly hexadecimal
     strings to the user and forcing them to understand what they mean
     is even worse.

   * Suppose an existing printer is moved to a new department, and given
     a new name and a new function. Changing the user-visible name of
     that piece of hardware doesn't change its hidden internal unique
     id. Users who had previously created print queues for that printer
     will still be accessing the same hardware by its unique id, even
     though the logical service that used to be offered by that hardware
     has ceased to exist.

   To solve these problems requires the user or administrator to be
   aware of the supposedly hidden unique id, and to set its value
   correctly as hardware is moved around, repurposed, or replaced,
   thereby contradicting the notion that it is a hidden identifier that
   human users never need to deal with. Requiring the user to unserstand
   this expert behind-the-scenes knowledge of what is *really* going on
   is just one more burden placed on the user when they are trying to
   diagnose why their computers and network devices are not working as
   expected.

   These anomalies and counter-intuitive behaviours can be eliminated by
   maintaining a tight bidirectional one-to-one mapping between what the
   user sees on the screen and what is really happening "behind the


Expires 14th August 2004           Cheshire & Krochmal          [Page 8]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   curtain". If something is configured incorrectly, then that is
   apparent in the familiar day-to-day user interface that everyone
   understands, not in some little-known rarely-used "expert" interface.

   In summary: The user-visible name is the primary identifier for a
   service. If the user-visible name is changed, then conceptually the
   service being offered is a different logical service -- even though
   the hardware offering the service stayed the same. If the
   user-visible name doesn't change, then conceptually the service being
   offered is the same logical service -- even if the hardware offering
   the service is new hardware brought in to replace some old equipment.

   There are certainly arguments on both sides of this debate.
   Nonetheless, the designers of any service discovery protocol have
   to make a choice between between having the primary identifiers be
   hidden, or having them be visible, and these are the reasons that we
   chose to make them visible. We're not claiming that there are no
   disadvantages of having primary identifiers be visible. We considered
   both alternatives, and we believe that the few disadvantages
   of visible identifiers are far outweighed by the many problems
   caused by use of hidden identifiers.


4.5 Ordering of Service Instance Name Components

   There have been questions about why services are named using DNS
   Service Instance Names of the form:

      Service Instance Name = <Instance> . <Service> . <Domain>

   instead of:

      Service Instance Name = <Service> . <Instance> . <Domain>

   There are three reasons why it is beneficial to name service
   instances with the parent domain as the most-significant (rightmost)
   part of the name, then the abstract service type as the nextmost
   significant, and then the specific instance name as the
   least-significant (leftmost) part of the name:


4.5.1. Semantic Structure

   The facility being provided by browsing ("Service Instance
   Enumeration") is effectively enumerating the leaves of a tree
   structure. A given domain offers zero or more services. For each of
   those service types, there may be zero or more instances of that
   service.


Expires 14th August 2004           Cheshire & Krochmal          [Page 9]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   The user knows what type of service they are seeking. (If they are
   running an FTP client, they are looking for FTP servers. If they have
   a document to print, they are looking for entities that speak some
   known printing protocol.) The user knows in which organizational or
   geographical domain they wish to search. (The user does not want a
   single flat list of every single printer on the planet, even if such
   a thing were possible.) What the user does not know in advance is
   whether the service they seek is offered in the given domain, or if
   so, how many instances are offered, and the names of those instances.
   Hence having the instance names be the leaves of the tree is
   consistent with this semantic model.

   Having the service types be the terminal leaves of the tree would
   imply that the user knows the domain name, and already knows the
   name of the service instance, but doesn't have any idea what the
   service does. We would argue that this is a less useful model.


4.5.2. Network Efficiency

   When a DNS response contains multiple answers, name compression works
   more effectively if all the names contain a common suffix. If many
   answers in the packet have the same <Service> and <Domain>, then each
   occurrence of a Service Instance Name can be expressed using only the
   <Instance> part followed by a two-byte compression pointer
   referencing a previous appearance of "<Service>.<Domain>". This
   efficiency would not be possible if the <Service> component appeared
   first in each name.


4.5.3. Operational Flexibility

   This name structure allows subdomains to be delegated along logical
   service boundaries. For example, the network administrator at Example
   Co. could choose to delegate the "_tcp.example.com." subdomain to a
   different machine, so that the machine handling service discovery
   doesn't have to be the same as the machine handling other day-to-day
   DNS operations. (It *can* be the same machine if the administrator so
   chooses, but the point is that the administrator is free to make that
   choice.) Furthermore, if the network administrator wishes to delegate
   all information related to IPP printers to a machine dedicated to
   that specific task, this is easily done by delegating the
   "_ipp._tcp.example.com." subdomain to the desired machine. It is also
   convenient to set security policies on a per-zone/per-subdomain
   basis. For example, the administrator may choose to enable DNS
   Dynamic Update [RFC 2136] [RFC 3007] for printers registering in the
   "_ipp._tcp.example.com." subdomain, but not for other
   zones/subdomains. This easy flexibility would not exist if the
   <Service> component appeared first in each name.


Expires 14th August 2004           Cheshire & Krochmal         [Page 10]

Internet Draft       DNS-Based Service Discovery      14th February 2004


5. Service Name Resolution

   Given a particular Service Instance Name, when a client needs to
   contact that service, it sends a DNS query for the SRV record of
   that name.

   The result of the DNS query is a SRV record giving the port number
   and target host where the service may be found.

   The use of SRV records is very important. There are only 65535 TCP
   port numbers available. These port numbers are being allocated
   one-per-application-protocol at an alarming rate. Some protocols like
   the X Window System have a block of 64 TCP ports allocated
   (6000-6063). If we start allocating blocks of 64 TCP ports at a time,
   we will run out even faster. Using a different TCP port for each
   different instance of a given service on a given machine is entirely
   sensible, but allocating large static ranges, as was done for X, is a
   very inefficient way to manage a limited resource. On any given host,
   most TCP ports are reserved for services that will never run on that
   particular host. This is very poor utilization of the limited port
   space. Using SRV records allows each host to allocate its available
   port numbers dynamically to those services running on that host that
   need them, and then advertise the allocated port numbers via SRV
   records. Allocating the available listening port numbers locally
   on a per-host basis as needed allows much better utilization of the
   available port space than today's centralized global allocation.

   In some environments there may be no compelling reason to assign
   managed names to every host, since every available service is
   accessible by name anyway, as a first-class entity in its own right.
   However, the DNS packet format and record format still require a host
   name to link the target host referenced in the SRV record to the
   address records giving the IPv4 and/or IPv6 addresses for that
   hardware. In the case where no natural host name is available, the
   SRV record may give its own name as the name of the target host, and
   then the requisite address records may be attached to that same name.
   It is perfectly permissible for a single name in the DNS hierarchy to
   have multiple records of different type attached. (The only
   restriction being that a given name may not have both a CNAME record
   and other records at the same time.)

   In the event that more than one SRV is returned, clients MUST
   correctly interpret the priority and weight fields -- i.e. Lower
   numbered priority servers should be used in preference to higher
   numbered priority servers, and servers with equal priority should be
   selected randomly in proportion to their relative weights.


Expires 14th August 2004           Cheshire & Krochmal         [Page 11]

Internet Draft       DNS-Based Service Discovery      14th February 2004


6. Data Syntax for DNS-SD TXT Records

   Some services discovered via Service Instance Enumeration may need
   more than just an IP address and port number to properly identify the
   service. For example, printing via the LPR protocol often specifies a
   queue name. This queue name is typically short and cryptic, and need
   not be shown to the user. It should be regarded the same way as the
   IP address and port number -- it is one component of the addressing
   information required to identify a specific instance of a service
   being offered by some piece of hardware. Similarly, a file server may
   have multiple volumes, each identified by its own volume name. A Web
   server typically has multiple pages, each identified by its own URL.
   In these cases, the necessary additional data is stored in a TXT
   record with the same name as the SRV record. The specific nature of
   that additional data, and how it is to be used, is service-dependent,
   but the overall syntax of the data in the TXT record is standardized,
   as described below.


6.1 General Format Rules for DNS TXT Records

   A DNS TXT record can be up to 65535 (0xFFFF) bytes long. The total
   length is indicated by the length given in the resource record header
   in the DNS message. There is no way to tell directly from the data
   alone how long it is (e.g. there is no length count at the start, or
   terminating NULL byte at the end). (Note that when using Multicast
   DNS [mDNS] the maximum packet size is 9000 bytes, which imposes an
   upper limit on the size of TXT records of about 8800 bytes.)

   The format of the data within a DNS TXT record is zero or more
   strings, packed together in memory without any intervening gaps or
   padding bytes for word alignment.

   The format of each constituent string within the DNS TXT record is a
   single length byte, followed by 0-255 bytes of text data.

   These format rules are defined in Section 3.3.14 of RFC 1035, and are
   not specific to DNS-SD. DNS-SD simply specifies a usage convention
   for what data should be stored in those constituent strings.


6.2 DNS TXT Record Format Rules for use in DNS-SD

   DNS-SD uses DNS TXT records to store arbitrary name/value pairs
   conveying additional information about the named service. Each
   name/value pair is encoded as its own constituent string within the
   DNS TXT record, in the form "name=value". Everything up to the first
   '=' character is the name. Everything after the first '=' character
   to the end of the string (including subsequent '=' characters, if
   any) is the value. Specific rules governing names and values are
   given below. Each author defining a DNS-SD profile for discovering


Expires 14th August 2004           Cheshire & Krochmal         [Page 12]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   instances of a particular type of service should define the base set
   of name/value attributes that are valid for that type of service.

   Using this standardized name/value syntax within the TXT record makes
   it easier for these base definitions to be expanded later by defining
   additional named attributes. If an implementation sees unknown
   attribute names in a service TXT record, it MUST silently ignore them.

   The TCP (or UDP) port number of the service, and target host name,
   are given in the SRV record. This information -- target host name and
   port number -- MUST NOT be duplicated using name/value attributes in
   the TXT record.

   The intention of DNS-SD TXT records is to convey a small amount of
   useful additional information about a service. Ideally it SHOULD NOT
   be necessary for a client to retrieve this additional information
   before it can usefully establish a connection to the service. For a
   well-designed TCP-based application protocol, it should be possible,
   knowing only the host name and port number, to open a connection to
   that listening process, and then perform version- or feature-
   negotiation to determine the capabilities of the service instance.
   For example, when connecting to an AppleShare server over TCP, the
   client enters into a protocol exchange with the server to determine
   which version of the AppleShare protocol the server implements, and
   which optional features or capabilities (if any) are available. For a
   well-designed application protocol, clients should be able to connect
   and use the service even if there is no information at all in the TXT
   record. In this case, the information in the TXT record should be
   viewed as a performance optimization -- when a client discovers many
   instances of a service, the TXT record allows the client to know some
   rudimentary information about each instance without having to open a
   TCP connection to each one and interrogate every service instance
   separately. Extreme care should be taken when doing this to ensure
   that the information in the TXT record is in agreement with the
   information retrieved by a client connecting over TCP.

   There are legacy protocols which provide no feature negotiation
   capability, and in these cases it may be useful to convey necessary
   information in the TXT record. For example, when printing using the
   old Unix LPR (port 515) protocol, the LPR service provides no way for
   the client to determine whether a particular printer accepts
   PostScript, or what version of PostScript, etc. In this case it is
   appropriate to embed this information in the TXT record, because the
   alternative is worse -- passing around written instructions to the
   users, arcane manual configuration of "/etc/printcap" files, etc.


Expires 14th August 2004           Cheshire & Krochmal         [Page 13]

Internet Draft       DNS-Based Service Discovery      14th February 2004


6.3 DNS-SD TXT Record Size

   The total size of a typical DNS-SD TXT record is intended to be small
   -- 200 bytes or less.

   In cases where more data is justified (e.g. LPR printing), keeping
   the total size under 400 bytes should allow it to fit in a single
   standard 512-byte DNS message. (This standard DNS message size is
   defined in RFC 1035.)

   In extreme cases where even this is not enough, keeping the size of
   the TXT record under 1300 bytes should allow it to fit in a single
   1500-byte Ethernet packet.

   Using TXT records larger than 1300 bytes is NOT RECOMMENDED at this
   time.


6.4 Rules for Names in DNS-SD Name/Value Pairs

   The "Name" MUST be at least one character. Strings beginning with an
   '=' character (i.e. the name is missing) SHOULD be silently ignored.

   The characters of "Name" MUST be printable US-ASCII values
   (0x20-0x7E), excluding '=' (0x3D).

   Spaces in the name are significant, whether leading, trailing, or in
   the middle -- so don't include any spaces unless you really intend
   that!

   Case is ignored when interpreting a name, so "papersize=A4",
   "PAPERSIZE=A4" and "Papersize=A4" are all identical.

   If there is no '=', then it is a boolean attribute, and is simply
   identified as being present, with no value.

   Unless specified otherwise by a particular DNS-SD profile, a given
   attribute name may appear at most once in a TXT record. If a client
   receives a TXT record containing the same attribute name more than
   once, then the client SHOULD silently ignore all but the first
   occurrence of that attribute. For client implementations that process
   a DNS-SD TXT record from start to end, placing name/value pairs into
   a hash table, using the name as the hash table key, this means that
   if the implementation attempts to add a new name/value pair into the
   table and finds an entry with the same name already present, then the
   new entry being added should be silently discarded instead. For
   client implementations that retrieve name/value pairs by searching
   the TXT record for the requested name, they should search the TXT
   record from the start, and simply return the first matching name they
   find.


Expires 14th August 2004           Cheshire & Krochmal         [Page 14]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   When examining a TXT record for a given named attribute, there are
   therefore four broad categories of results which may be returned:

   * Attribute not present (Absent)

   * Attribute present, with no value
     (e.g. "Anon Allowed" -- server allows anonymous connections)

   * Attribute present, with empty value (e.g. "Installed PlugIns=" --
     server supports plugins, but none are presently installed)

   * Attribute present, with non-empty value
     (e.g. "Installed PlugIns=JPEG,MPEG2,MPEG4")

   Each author defining a DNS-SD profile for discovering instances of a
   particular type of service should define the interpretation of these
   different kinds of result. For example, for some keys, there may be
   a natural true/false boolean interpretation:

   * Present implies 'true'
   * Absent implies 'false'

   For other keys it may be sensible to define other semantics, such as
   value/no-value/unknown:

   * Present with value implies that value.
     E.g. "Color=4" for a four-color ink-jet printer,
     or "Color=6" for a six-color ink-jet printer.

   * Present with empty value implies 'false'. E.g. Not a color printer.
    
   * Absent implies 'Unknown'. E.g. A print server connected to some
     unknown printer where the print server doesn't actually know if the
     printer does color or not -- which gives a very bad user experience
     and should be avoided wherever possible.

   (Note that this is a hypothetical example, not an example of actual
   name/value keys used by DNS-SD network printers.)

   As a general rule, attribute names that contain no dots are defined
   as part of the open-standard definition written by the person or
   group defining the DNS-SD profile for discovering that particular
   service type. Vendor-specific extensions should be given names of the
   form "keyname.company.com=value", using a domain name legitimately
   registered to the person or organization creating the vendor-specific
   key. This reduces the risk of accidental conflict if different
   organizations each define their own vendor-specific keys.


Expires 14th August 2004           Cheshire & Krochmal         [Page 15]

Internet Draft       DNS-Based Service Discovery      14th February 2004


6.5 Rules for Values in DNS-SD Name/Value Pairs

   If there is an '=', then everything after the first '=' to the end of
   the string is the value. The value can contain any eight-bit values
   including '='. Leading or trailing spaces are part of the value, so
   don't put them there unless you intend them to be there. Any
   quotation marks around the value are part of the value, so don't put
   them there unless you intend them to be part of the value.

   The value is opaque binary data. Often the value for a particular
   attribute will be US-ASCII (or UTF-8) text, but it is legal for a
   value to be any binary data. For example, if the value of a key is an
   IPv4 address, that address should simply be stored as four bytes of
   binary data, not as a variable-length 7-15 byte ASCII string giving
   the address represented in textual dotted decimal notation.

   Generic debugging tools should generally display all attribute values
   as a hex dump, with accompanying text alongside displaying the UTF-8
   interpretation of those bytes, except for attributes where the
   debugging tool has embedded knowledge that the value is some other
   kind of data.

   Authors defining DNS-SD profiles SHOULD NOT convert binary attribute
   data types into printable text (e.g. using hexadecimal, Base64 or UU
   encoding) merely for the sake of making the data be printable text
   when seen in a generic debugging tool. Doing this simply bloats the
   size of the TXT record, without atually making the data any more
   understandable to someone looking at it in a generic debugging tool.


6.6 Example TXT Record

   The TXT record below contains three syntactically valid name/value
   pairs. (The meaning of these name/value pairs, if any, would depend
   on the definitions pertaining to the service in question that is
   using them.)

   ---------------------------------------------------------------
   | 0x0A | name=value | 0x08 | paper=A4 | 0x0E | DNS-SD Is Cool |
   ---------------------------------------------------------------


Expires 14th August 2004           Cheshire & Krochmal         [Page 16]

Internet Draft       DNS-Based Service Discovery      14th February 2004


6.7 Version Tag

   It is recommended that authors defining DNS-SD profiles include an
   attribute of the form "txtvers=xxx" in their definition, and require
   it to be the first name/value pair in the TXT record. This
   information in the TXT record can be useful to help clients maintain
   backwards compatibility with older implementations if it becomes
   necessary to change or update the specification over time. Even if
   the profile author doesn't anticipate the need for any future
   incompatible changes, having a version number in the specification
   provides useful insurance should incompatible changes become
   unavoidable. Clients SHOULD ignore TXT records with a txtvers number
   higher (or lower) than the version(s) they know how to interpret.

   Note that the version number in the txtvers tag describes the version
   of the TXT record specification being used to create this TXT record,
   not the version of the application protocol that will be used if the
   client subsequently decides to contact that service. Ideally, every
   DNS-SD TXT record specification starts at txtvers=1 and stays that
   way forever. Improvements can be made by defining new keys that older
   clients silently ignore. The only reason to increment the version
   number is if the old specification is subsequently found to be so
   horribly broken that there's no way to do a compatible forward
   revision, so the txtvers number has to be incremented to tell all the
   old clients they should just not even try to understand this new TXT
   record.

   If there is a need to indicate which version number(s) of the
   application protocol the service implements, the recommended key
   name for this is "protovers".


Expires 14th August 2004           Cheshire & Krochmal         [Page 17]

Internet Draft       DNS-Based Service Discovery      14th February 2004


7. Application Protocol Names

   The <Service> portion of a Service Instance Name consists of a pair
   of DNS labels, following the established convention for SRV records
   [RFC 2782], namely: the first label of the pair is the Application
   Protocol Name, and the second label is either "_tcp" or "_udp".

   Wise selection of the Application Protocol Name is very important,
   and the choice is not always as obvious as it may appear.

   In some cases, the Application Protocol Name merely names and refers
   to the on-the-wire message format and semantics being used. FTP is
   "ftp", IPP printing is "ipp", and so on.

   However, it is common to "borrow" an existing protocol and repurpose
   it for a new task. This is entirely sensible and sound engineering
   practice, but that doesn't mean that the new protocol is providing
   the same semantic service as the old one, even if it borrows the same
   message formats. For example, the local network music playing
   protocol implemented by iTunes on Macintosh and Windows is little
   more than "HTTP GET" commands. However, that does *not* mean that it
   is sensible or useful to try to access one of these music servers by
   connecting to it with a standard web browser. Consequently, the
   DNS-SD service advertised (and browsed for) by iTunes is "_daap._tcp"
   (Digital Audio Access Procol), not "_http._tcp". Advertising
   "_http._tcp" service would cause iTunes servers to show up in
   conventional Web browsers (Safari, Camino, OmniWeb, Opera, Netscape,
   Internet Explorer, etc.) which is little use since it offers no pages
   containing human-readable content. Similarly, browsing for
   "_http._tcp" service would cause iTunes to find generic web servers,
   such as the embedded web servers in devices like printers, which is
   little use since printers generally don't have much music to offer.

   Similarly, NFS is built on top of SUN RPC, but that doesn't mean it
   makes sense for an NFS server to advertise that it provides "SUN RPC"
   service. Likewise, Microsoft SMB file service is built on top of
   Netbios running over IP, but that doesn't mean it makes sense for an
   SMB file server to advertise that it provides "Netbios-over-IP"
   service. The DNS-SD name of a service needs to encapsulate both the
   "what" (semantics) and the "how" (protocol implementation) of the
   service, since knowledge of both is necessary for a client to
   usefully use the service. Merely advertising that a service was built
   on top of SUN RPC is no use if the client has no idea what the
   service actually does.

   Another common mistake is to assume that the service type advertised
   by iTunes should be "_daap._http._tcp." This is also incorrect. Part
   of the confusion here is that the presence of "_tcp" or "_udp" in the
   <Service> portion of a Service Instance Name has led people to assume
   that the structure of a service name has to reflect the internal
   structure of how the protocol was implemented. This is not correct.


Expires 14th August 2004           Cheshire & Krochmal         [Page 18]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   The "_tcp" or "_udp" should be regarded as little more than
   boilerplate text, and care should be taken not to attach too much
   importance to it. Some might argue that the "_tcp" or "_udp" should
   not be there at all, but this format is defined by RFC 2782, and
   that's not going to change. In addition, the presence of "_tcp" has
   the useful side-effect that it provides a convenient delegation point
   to hand off control to a different DNS server, if so desired.


8. Selective Instance Enumeration

   This document does not attempt to define an arbitrary query language
   for service discovery, nor do we believe one is necessary.

   However, there are some circumstances where narrowing the list of
   results may be useful. A Web browser client that is able to retrieve
   HTML documents via HTTP and display them may also be able to retrieve
   HTML documents via FTP and display them, but only in the case of FTP
   servers that allow anonymous login. For that Web browser, discovering
   all FTP servers on the network is not useful. The Web browser only
   wants to discover FTP servers that it is able to talk to. In this
   case, a subtype of "_ftp._tcp" could be defined. Instead of issuing a
   query for "_ftp._tcp.<Domain>", the Web browser issues a query for
   "_anon._ftp._tcp.<Domain>", where "_anon" is a defined subtype of
   "_ftp._tcp". The response to this query only includes the names of
   SRV records for FTP servers that are willing to allow anonymous
   login.

   Note that the FTP server's Service Instance Name is unchanged -- it
   is still something of the form "The Server._ftp._tcp.example.com."
   The subdomain in which FTP server SRV records are registered defines
   the namespace within which FTP server names are unique. Additional
   subtypes (e.g. "_anon") of the basic service type (e.g. "_ftp._tcp")
   serve to narrow the list of results, not to create more namespace.

   As with the TXT record name/value pairs, the list of possible
   subtypes, if any, are defined and specified separately for each basic
   service type.


Expires 14th August 2004           Cheshire & Krochmal         [Page 19]

Internet Draft       DNS-Based Service Discovery      14th February 2004


9. Flagship Naming

   In some cases, there may be several network protocols available which
   all perform roughly the same logical function. For example, the
   printing world has the LPR protocol, and the Internet Printing
   Protocol (IPP), both of which cause printed sheets to be emitted from
   printers in much the same way. In addition, many printer vendors send
   their own proprietary page description language (PDL) data over a TCP
   connection to TCP port 9100, herein referred to as the
   "pdl-datastream" protocol. In an ideal world we would have only one
   network printing protocol, and it would be sufficiently good that no
   one felt a compelling need to invent a different one. However, in
   practice, multiple legacy protocols do exist, and a service discovery
   protocol has to accommodate that.

   Many printers implement all three printing protocols: LPR, IPP, and
   pdl-datastream. For the benefit of clients that may speak only one of
   those protocols, all three are advertised.

   However, some clients may implement two, or all three of those
   printing protocols. When a client looks for all three service types
   on the network, it will find three distinct services -- an LPR
   service, an IPP service, and a pdl-datastream service -- all of which
   cause printed sheets to be emitted from the same physical printer.

   In the case of multiple protocols like this that all perform
   effectively the same function, the client should suppress duplicate
   names and display each name only once. When the user prints to a
   given named printer, the printing client is responsible for choosing
   the protocol which will best achieve the desired effect, without, for
   example, requiring the user to make a manual choice between LPR and
   IPP.

   As described so far, this all works very well. However, consider some
   future printer that only supports IPP printing, and some other future
   printer that only supports pdl-datastream printing. The name spaces
   for different service types are intentionally disjoint -- it is
   acceptable and desirable to be able to have both a file server called
   "Sales Department" and a printer called "Sales Department". However,
   it is not desirable, in the common case, to have two different
   printers both called "Sales Department", just because those printers
   are implementing different protocols.

   To help guard against this, when there are two or more network
   protocols which perform roughly the same logical function, one of the
   protocols is declared the "flagship" of the fleet of related
   protocols. Typically the flagship protocol is the oldest and/or
   best-known protocol of the set.

   If a device does not implement the flagship protocol, then it instead
   creates a placeholder SRV record (priority=0, weight=0, port=0,


Expires 14th August 2004           Cheshire & Krochmal         [Page 20]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   target host = hostname of device) with that name. If, when it
   attempts to create this SRV record, it finds that a record with the
   same name already exists, then it knows that this name is already
   taken by some entity implementing at least one of the protocols from
   the class, and it must choose another. If no SRV record already
   exists, then the act of creating it stakes a claim to that name so
   that future devices in the same class will detect a conflict when
   they try to use it. The SRV record needs to contain the target host
   name in order for the conflict detection rules to operate. If two
   different devices were to create placeholder SRV records both using a
   null target host name (just the root label), then the two SRV records
   would be seen to be in agreement so no conflict would be registered.

   By defining a common well-known flagship protocol for the class,
   future devices that may not even know about each other's protocols
   establish a common ground where they can coordinate to verify
   uniqueness of names.

   No PTR record is created advertising the presence of empty flagship
   SRV records, since they do not represent a real service being
   advertised.


10. Service Type Enumeration

   In general, clients are not interested in finding *every* service on
   the network, just the services that the client knows how to talk to.
   (Software designers may *think* there's some value to finding *every*
   service on the network, but that's just wooly thinking.)

   However, for problem diagnosis and network management tools, it may
   be useful for network administrators to find the list of advertised
   service types on the network, even if those service names are just
   opaque identifiers and not particularly informative in isolation.

   For this reason, a special meta-query is defined. A DNS query for
   PTR records with the name "_services._dns-sd._udp.<Domain>" yields
   a list of PTR records, where the rdata of each PTR record is the
   name of a service type. A subsequent query for PTR records with
   one of those names yields a list of instances of that service type.


Expires 14th August 2004           Cheshire & Krochmal         [Page 21]

Internet Draft       DNS-Based Service Discovery      14th February 2004


11. Populating the DNS with Information

   How the SRV and PTR records that describe services and allow them to
   be enumerated make their way into the DNS is outside the scope of
   this document. However, it can happen easily in any of a number of
   ways, for example:

   On some networks, the administrator might manually enter the records
   into the name server's configuration file.

   A network monitoring tool could output a standard zone file to be
   read into a conventional DNS server. For example, a tool that can
   find Apple LaserWriters using AppleTalk NBP could find the list of
   printers, communicate with each one to find its IP address,
   PostScript version, installed options, etc., and then write out a DNS
   zone file describing those printers and their capabilities using DNS
   resource records. That information would then be available to DNS-SD
   clients that don't implement AppleTalk NBP, and don't want to.

   Future IP printers could use Dynamic DNS Update [RFC 2136] to
   automatically register their own SRV and PTR records with the DNS
   server.

   A printer manager device which has knowledge of printers on the
   network through some other management protocol could also use Dynamic
   DNS Update [RFC 2136].

   Alternatively, a printer manager device could implement enough of the
   DNS protocol that it is able to answer DNS queries directly, and
   Example Co.'s main DNS server could delegate the
   _ipp._tcp.example.com subdomain to the printer manager device.

   Zeroconf printers answer Multicast DNS queries on the local link
   for appropriate PTR and SRV names ending with ".local." [mDNS]


12. Relationship to Multicast DNS

   DNS-Based Service Discovery is only peripherally related to Multicast
   DNS, in that the standard unicast DNS queries used by DNS-SD may also
   be performed using multicast when appropriate, which is particularly
   beneficial in Zeroconf environments [ZC].


Expires 14th August 2004           Cheshire & Krochmal         [Page 22]

Internet Draft       DNS-Based Service Discovery      14th February 2004


13. Discovery of Browsing and Registration Domains (Domain Enumeration)

   One of the main reasons for DNS-Based Service Discovery is so that
   when a visiting client (e.g. a laptop computer) arrives at a new
   network, it can discover what services are available on that network
   without manual configuration. This logic that applies to discovering
   services without manual configuration also applies to discovering the
   domains in which services are registered without requiring manual
   configuration.

   This discovery is performed recursively, using Unicast or Multicast
   DNS. Four special RR names are reserved for this purpose:

                 _browse._dns-sd._udp.<domain>
        _default._browse._dns-sd._udp.<domain>
               _register._dns-sd._udp.<domain>
      _default._register._dns-sd._udp.<domain>

   By performing PTR queries for these names, a client can learn,
   respectively:

   o A list of domains recommended for browsing

   o A single recommended default domain for browsing

   o A list of domains recommended for registering services using
     Dynamic Update

   o A single recommended default domain for registering services.

   These domains are purely advisory. The client or user is free to
   browse and/or register services in any domains. The purpose of these
   special queries is to allow software to create a user-interface that
   displays a useful list of suggested choices to the user, from which
   they may make a suitable selection, or ignore the offered suggestions
   and manually enter their own choice.

   The <domain> part of the name may be ".local." (meaning "perform the
   query using link-local multicast) or it may be learned through some
   other mechanism, such as the DHCP "Domain" option (option code 15)
   [RFC 2132] or the DHCP "Domain Search" option (option code 119)
   [RFC 3397]. Sophisticated clients may perform these queries both in
   ".local." and in one or more unicast domains, and then present the
   user with an aggregate result, combining the information received
   from all sources.


Expires 14th August 2004           Cheshire & Krochmal         [Page 23]

Internet Draft       DNS-Based Service Discovery      14th February 2004


14. DNS Additional Record Generation

   DNS has an efficiency feature whereby a DNS server may place
   additional records in the Additional Section of the DNS Message.
   These additional records are typically records that the client did
   not explicitly request, but the server has reasonable grounds to
   expect that the client might request them shortly.

   This section recommends which additional records should be generated
   to improve network efficiency for both unicast and multicast DNS-SD
   responses.


14.1 PTR Records

   When including a PTR record in a response packet, the
   server/responder SHOULD include the following additional records:

   o The SRV record(s) named in the PTR rdata.
   o The TXT record(s) named in the PTR rdata.
   o All address records (type "A" and "AAAA") named in the SRV rdata.


14.2 SRV Records

   When including an SVR record in a response packet, the
   server/responder SHOULD include the following additional records:

   o All address records (type "A" and "AAAA") named in the SRV rdata.


14.3 TXT Records

   When including a TXT record in a response packet, no additional
   records are required.


14.4 Other Record Types

   In response to address queries, or other record types, no additional
   records are required by this document.


Expires 14th August 2004           Cheshire & Krochmal         [Page 24]

Internet Draft       DNS-Based Service Discovery      14th February 2004


15. Comparison with Alternative Service Discovery Protocols

   Over the years there have been many proposed ways to do network
   service discovery with IP, but none achieved ubiquity in the
   marketplace. Certainly none has achieved anything close to the
   ubiquity of today's deployment of DNS servers, clients, and other
   infrastructure.

   The advantage of using DNS as the basis for service discovery is that
   it makes use of those existing servers, clients, protocols,
   infrastructure, and expertise. Existing network analyser tools
   already know how to decode and display DNS packets for network
   debugging.

   For ad-hoc networks such as Zeroconf environments, peer-to-peer
   multicast protocols are appropriate. The Zeroconf host profile [ZCHP]
   requires the use of a DNS-like protocol over IP Multicast for host
   name resolution in the absence of DNS servers. Given that Zeroconf
   hosts will have to implement this Multicast-based DNS-like protocol
   anyway, it makes sense for them to also perform service discovery
   using that same Multicast-based DNS-like software, instead of also
   having to implement an entirely different service discovery protocol.

   In larger networks, a high volume of enterprise-wide IP multicast
   traffic may not be desirable, so any credible service discovery
   protocol intended for larger networks has to provide some facility to
   aggregate registrations and lookups at a central server (or servers)
   instead of working exclusively using multicast. This requires some
   service discovery aggregation server software to be written,
   debugged, deployed, and maintained. This also requires some service
   discovery registration protocol to be implemented and deployed for
   clients to register with the central aggregation server. Virtually
   every company with an IP network already runs a DNS server, and DNS
   already has a dynamic registration protocol [RFC 2136]. Given that
   virtually every company already has to operate and maintain a DNS
   server anyway, it makes sense to take advantage of this instead of
   also having to learn, operate and maintain a different service
   registration server. It should be stressed again that using the same
   software and protocols doesn't necessarily mean using the same
   physical piece of hardware. The DNS-SD service discovery functions
   do not have to be provided by the same piece of hardware that
   is currently providing the company's DNS name service. The
   "_tcp.<Domain>" subdomain may be delegated to a different piece of
   hardware. However, even when the DNS-SD service is being provided by
   a different piece of hardware, it is still the same familiar DNS
   server software that is running, with the same configuration file
   syntax, the same log file format, and so forth.


Expires 14th August 2004           Cheshire & Krochmal         [Page 25]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   Service discovery needs to be able to provide appropriate security.
   DNS already has existing mechanisms for security [RFC 2535].

   In summary:

      Service discovery requires a central aggregation server.
      DNS already has one: It's called a DNS server.

      Service discovery requires a service registration protocol.
      DNS already has one: It's called DNS Dynamic Update.

      Service discovery requires a query protocol
      DNS already has one: It's called DNS.

      Service discovery requires security mechanisms.
      DNS already has security mechanisms: DNSSEC.

      Service discovery requires a multicast mode for ad-hoc networks.
      Zeroconf environments already require a multicast-based DNS-like
      name lookup protocol for mapping host names to addresses, so it
      makes sense to let one multicast-based protocol do both jobs.

   It makes more sense to use the existing software that every network
   needs already, instead of deploying an entire parallel system just
   for service discovery.


Expires 14th August 2004           Cheshire & Krochmal         [Page 26]

Internet Draft       DNS-Based Service Discovery      14th February 2004


16. Real Example

   The following examples were prepared using standard unmodified
   nslookup and standard unmodified BIND running on GNU/Linux.

   Note: In real products, this information is obtained and presented to
   the user using graphical network browser software, not command-line
   tools, but if you wish you can try these examples for yourself as you
   read along, using the command-line tools already available on your
   own Unix machine.


16.1 Question: What FTP servers are being advertised from dns-sd.org?

   nslookup -q=ptr _ftp._tcp.dns-sd.org.
   _ftp._tcp.dns-sd.org name=Apple\032QuickTime\032Files.dns-sd.org
   _ftp._tcp.dns-sd.org name=Microsoft\032Developer\032Files.dns-sd.org
   _ftp._tcp.dns-sd.org name=Registered\032Users'\032Only.dns-sd.org

   Answer: There are three, called "Apple QuickTime Files",
   "Microsoft Developer Files" and "Registered Users' Only".

   Note that nslookup escapes spaces as "\032" for display purposes,
   but a graphical DNS-SD browser does not.


16.2 Question: What FTP servers allow anonymous access?

   nslookup -q=ptr _anon._ftp._tcp.dns-sd.org
   _anon._ftp._tcp.dns-sd.org
                        name=Apple\032QuickTime\032Files.dns-sd.org
   _anon._ftp._tcp.dns-sd.org
                        name=Microsoft\032Developer\032Files.dns-sd.org

   Answer: Only "Apple QuickTime Files" and "Microsoft Developer Files"
   allow anonymous access.


16.3 Question: How do I access "Apple QuickTime Files"?

   nslookup -q=any "Apple\032QuickTime\032Files.dns-sd.org."
   Apple\032QuickTime\032Files.dns-sd.org  text = "path=/quicktime"
   Apple\032QuickTime\032Files.dns-sd.org
        priority = 0, weight = 0, port= 21 host = ftp.apple.com
   ftp.apple.com   internet address = 17.254.0.27
   ftp.apple.com   internet address = 17.254.0.31
   ftp.apple.com   internet address = 17.254.0.26

   Answer: You need to connect to ftp.apple.com, port 21, path
   "/quicktime". The addresses for ftp.apple.com are also given.


Expires 14th August 2004           Cheshire & Krochmal         [Page 27]

Internet Draft       DNS-Based Service Discovery      14th February 2004


17. IPv6 Considerations

   IPv6 has no significant differences, except that the address of the
   SRV record's target host is given by the appropriate IPv6 address
   records instead of the IPv4 "A" record.


18. Security Considerations

   DNSSEC [RFC 2535] should be used where the authenticity of
   information is important. Since DNS-SD is just a naming and usage
   convention for records in the existing DNS system, it has no specific
   additional security requirements over and above those that already
   apply to DNS queries and DNS updates.


19. IANA Considerations

   This protocol builds on DNS SRV records [RFC 2782], and similarly
   requires IANA to assign unique application protocol names.
   Unfortunately, the "IANA Considerations" section of RFC 2782 says
   simply, "The IANA has assigned RR type value 33 to the SRV RR.
   No other IANA services are required by this document."
   Due to this oversight, IANA is currently prevented from carrying
   out the necessary function of assigning these unique identifiers.

   This document proposes the following IANA allocation policy for
   unique application protocol names:

   Allowable names:
     * Must be no more than fourteen characters long
     * Must consist only of:
       - lower-case letters 'a' - 'z'
       - digits '0' - '9'
       - the hyphen character '-'
     * Must begin and end with a lower-case letter or digit.
     * Must not already be assigned to some other protocol in the
       existing IANA "list of assigned application protocol names
       and port numbers" [ports].

   These identifiers are allocated on a First Come First Served basis.
   In the event of abuse (e.g. automatated mass registrations, etc.),
   the policy may be changed without notice to Expert Review [RFC 2434].

   The textual nature of service/protocol names means that there are
   almost infinitely many more of them available than the finite set of
   65535 possible port numbers. This means that developers can produce
   experimental implementations using unregistered service names with
   little chance of accidental collision, providing service names are
   chosen with appropriate care. However, this document strongly


Expires 14th August 2004           Cheshire & Krochmal         [Page 28]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   advocates that on or before the date a product ships, developers
   should properly register their service names.

   Some developers have expressed concern that publicly registering
   their service names (and port numbers today) with IANA before a
   product ships may give away clues about that product to competitors.
   For this reason, IANA should consider allowing service name
   applications to remain secret for some period of time, much as US
   patent applications remain secret for two years after the date of
   filing.

   This proposed IANA allocation policy is not in force until this
   document is published as an RFC. In the meantime, unique application
   protocol names may be registered according to the instructions at
   <http://www.dns-sd.org/ServiceNames.html>. As of January 2004, there
   are roughly 100 application protocols in currently shipping products
   that have been so registered as using DNS-SD for service discovery.


20. Acknowledgements

   We would like to thank (in alphabetical order) Richard Brown, Josh
   Graessley, Erik Guttman, Paul Vixie, and Bill Woodcock, for their
   contributions.


21. Copyright

   Copyright (C) The Internet Society 2004.
   All Rights Reserved.

   This document and translations of it may be copied and furnished to
   others, and derivative works that comment on or otherwise explain it
   or assist in its implementation may be prepared, copied, published
   and distributed, in whole or in part, without restriction of any
   kind, provided that the above copyright notice and this paragraph are
   included on all such copies and derivative works. However, this
   document itself may not be modified in any way, such as by removing
   the copyright notice or references to the Internet Society or other
   Internet organizations, except as needed for the purpose of
   developing Internet standards in which case the procedures for
   copyrights defined in the Internet Standards process must be
   followed, or as required to translate it into languages other than
   English.

   The limited permissions granted above are perpetual and will not be
   revoked by the Internet Society or its successors or assigns.

   This document and the information contained herein is provided on an
   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING


Expires 14th August 2004           Cheshire & Krochmal         [Page 29]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


22. Normative References

   [ports]    IANA list of assigned application protocol names and port
              numbers <http://www.iana.org/assignments/port-numbers>

   [RFC 1033] Lottor, M., "Domain Administrators Operations Guide",
              RFC 1033, November 1987.

   [RFC 1034] Mockapetris, P., "Domain Names - Concepts and
              Facilities", STD 13, RFC 1034, November 1987.

   [RFC 1035] Mockapetris, P., "Domain Names - Implementation and
              Specifications", STD 13, RFC 1035, November 1987.

   [RFC 2119] Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", RFC 2119, March 1997.

   [RFC 2279] Yergeau, F., "UTF-8, a transformation format of ISO
              10646", RFC 2279, January 1998.

   [RFC 2782] Gulbrandsen, A., et al., "A DNS RR for specifying the
              location of services (DNS SRV)", RFC 2782, February 2000.


23. Informative References

   [mDNS]     Cheshire, S., and M. Krochmal, "Multicast DNS",
              Internet-Draft (work in progress),
              draft-cheshire-dnsext-multicastdns-04.txt, February 2004.

   [NBP]      Cheshire, S., and M. Krochmal,
              "Requirements for a Protocol to Replace AppleTalk NBP",
              Internet-Draft (work in progress),
              draft-cheshire-dnsext-nbp-03.txt, February 2004.

   [RFC 2132] Alexander, S., and Droms, R., "DHCP Options and BOOTP
              Vendor Extensions", RFC 2132, March 1997.

   [RFC 2136] Vixie, P., et al., "Dynamic Updates in the Domain Name
              System (DNS UPDATE)", RFC 2136, April 1997.

   [RFC 2434] Narten, T., and H. Alvestrand, "Guidelines for Writing
              an IANA Considerations Section in RFCs", RFC 2434,
              October 1998.


Expires 14th August 2004           Cheshire & Krochmal         [Page 30]

Internet Draft       DNS-Based Service Discovery      14th February 2004


   [RFC 2535] Eastlake, D., "Domain Name System Security Extensions",
              RFC 2535, March 1999.

   [RFC 3007] Wellington, B., et al., "Secure Domain Name System (DNS)
              Dynamic Update", RFC 3007, November 2000.

   [RFC 3397] Aboba, B., and Cheshire, S., "Dynamic Host Configuration
              Protocol (DHCP) Domain Search Option", RFC 3397, November
              2002.

   [ZC]       Williams, A., "Requirements for Automatic Configuration
              of IP Hosts", Internet-Draft (work in progress),
              draft-ietf-zeroconf-reqts-12.txt, September 2002.

   [ZCHP]     Guttman, E., "Zeroconf Host Profile Applicability
              Statement", Internet-Draft (work in progress),
              draft-ietf-zeroconf-host-prof-01.txt, July 2001.


24. Author's Addresses

   Stuart Cheshire
   Apple Computer, Inc.
   1 Infinite Loop
   Cupertino
   California 95014
   USA

   Phone: +1 408 974 3207
   EMail: rfc@stuartcheshire.org


   Marc Krochmal
   Apple Computer, Inc.
   1 Infinite Loop
   Cupertino
   California 95014
   USA

   Phone: +1 408 974 4368
   EMail: marc@apple.com


Expires 14th August 2004           Cheshire & Krochmal         [Page 31]