/* ----------------------------------------------------------------------------
 *         SAM Software Package License
 * ----------------------------------------------------------------------------
 * Copyright (c) 2012, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following condition is met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

#ifndef _SAM4S_USART1_INSTANCE_
#define _SAM4S_USART1_INSTANCE_

/* ========== Register definition for USART1 peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_USART1_CR            (0x40028000U) /**< \brief (USART1) Control Register */
#define REG_USART1_MR            (0x40028004U) /**< \brief (USART1) Mode Register */
#define REG_USART1_IER           (0x40028008U) /**< \brief (USART1) Interrupt Enable Register */
#define REG_USART1_IDR           (0x4002800CU) /**< \brief (USART1) Interrupt Disable Register */
#define REG_USART1_IMR           (0x40028010U) /**< \brief (USART1) Interrupt Mask Register */
#define REG_USART1_CSR           (0x40028014U) /**< \brief (USART1) Channel Status Register */
#define REG_USART1_RHR           (0x40028018U) /**< \brief (USART1) Receiver Holding Register */
#define REG_USART1_THR           (0x4002801CU) /**< \brief (USART1) Transmitter Holding Register */
#define REG_USART1_BRGR          (0x40028020U) /**< \brief (USART1) Baud Rate Generator Register */
#define REG_USART1_RTOR          (0x40028024U) /**< \brief (USART1) Receiver Time-out Register */
#define REG_USART1_TTGR          (0x40028028U) /**< \brief (USART1) Transmitter Timeguard Register */
#define REG_USART1_FIDI          (0x40028040U) /**< \brief (USART1) FI DI Ratio Register */
#define REG_USART1_NER           (0x40028044U) /**< \brief (USART1) Number of Errors Register */
#define REG_USART1_IF            (0x4002804CU) /**< \brief (USART1) IrDA Filter Register */
#define REG_USART1_MAN           (0x40028050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
#define REG_USART1_WPMR          (0x400280E4U) /**< \brief (USART1) Write Protect Mode Register */
#define REG_USART1_WPSR          (0x400280E8U) /**< \brief (USART1) Write Protect Status Register */
#define REG_USART1_VERSION          (0x400280FCU) /**< \brief (USART1) Version Register */
#define REG_USART1_RPR           (0x40028100U) /**< \brief (USART1) Receive Pointer Register */
#define REG_USART1_RCR           (0x40028104U) /**< \brief (USART1) Receive Counter Register */
#define REG_USART1_TPR           (0x40028108U) /**< \brief (USART1) Transmit Pointer Register */
#define REG_USART1_TCR           (0x4002810CU) /**< \brief (USART1) Transmit Counter Register */
#define REG_USART1_RNPR          (0x40028110U) /**< \brief (USART1) Receive Next Pointer Register */
#define REG_USART1_RNCR          (0x40028114U) /**< \brief (USART1) Receive Next Counter Register */
#define REG_USART1_TNPR          (0x40028118U) /**< \brief (USART1) Transmit Next Pointer Register */
#define REG_USART1_TNCR          (0x4002811CU) /**< \brief (USART1) Transmit Next Counter Register */
#define REG_USART1_PTCR          (0x40028120U) /**< \brief (USART1) Transfer Control Register */
#define REG_USART1_PTSR          (0x40028124U) /**< \brief (USART1) Transfer Status Register */
#else
#define REG_USART1_CR   (*(WoReg*)0x40028000U) /**< \brief (USART1) Control Register */
#define REG_USART1_MR   (*(RwReg*)0x40028004U) /**< \brief (USART1) Mode Register */
#define REG_USART1_IER  (*(WoReg*)0x40028008U) /**< \brief (USART1) Interrupt Enable Register */
#define REG_USART1_IDR  (*(WoReg*)0x4002800CU) /**< \brief (USART1) Interrupt Disable Register */
#define REG_USART1_IMR  (*(RoReg*)0x40028010U) /**< \brief (USART1) Interrupt Mask Register */
#define REG_USART1_CSR  (*(RoReg*)0x40028014U) /**< \brief (USART1) Channel Status Register */
#define REG_USART1_RHR  (*(RoReg*)0x40028018U) /**< \brief (USART1) Receiver Holding Register */
#define REG_USART1_THR  (*(WoReg*)0x4002801CU) /**< \brief (USART1) Transmitter Holding Register */
#define REG_USART1_BRGR (*(RwReg*)0x40028020U) /**< \brief (USART1) Baud Rate Generator Register */
#define REG_USART1_RTOR (*(RwReg*)0x40028024U) /**< \brief (USART1) Receiver Time-out Register */
#define REG_USART1_TTGR (*(RwReg*)0x40028028U) /**< \brief (USART1) Transmitter Timeguard Register */
#define REG_USART1_FIDI (*(RwReg*)0x40028040U) /**< \brief (USART1) FI DI Ratio Register */
#define REG_USART1_NER  (*(RoReg*)0x40028044U) /**< \brief (USART1) Number of Errors Register */
#define REG_USART1_IF   (*(RwReg*)0x4002804CU) /**< \brief (USART1) IrDA Filter Register */
#define REG_USART1_MAN  (*(RwReg*)0x40028050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
#define REG_USART1_WPMR (*(RwReg*)0x400280E4U) /**< \brief (USART1) Write Protect Mode Register */
#define REG_USART1_WPSR (*(RoReg*)0x400280E8U) /**< \brief (USART1) Write Protect Status Register */
#define REG_USART1_VERSION (*(RoReg*)0x400280FCU) /**< \brief (USART1) Version Register */
#define REG_USART1_RPR  (*(RwReg*)0x40028100U) /**< \brief (USART1) Receive Pointer Register */
#define REG_USART1_RCR  (*(RwReg*)0x40028104U) /**< \brief (USART1) Receive Counter Register */
#define REG_USART1_TPR  (*(RwReg*)0x40028108U) /**< \brief (USART1) Transmit Pointer Register */
#define REG_USART1_TCR  (*(RwReg*)0x4002810CU) /**< \brief (USART1) Transmit Counter Register */
#define REG_USART1_RNPR (*(RwReg*)0x40028110U) /**< \brief (USART1) Receive Next Pointer Register */
#define REG_USART1_RNCR (*(RwReg*)0x40028114U) /**< \brief (USART1) Receive Next Counter Register */
#define REG_USART1_TNPR (*(RwReg*)0x40028118U) /**< \brief (USART1) Transmit Next Pointer Register */
#define REG_USART1_TNCR (*(RwReg*)0x4002811CU) /**< \brief (USART1) Transmit Next Counter Register */
#define REG_USART1_PTCR (*(WoReg*)0x40028120U) /**< \brief (USART1) Transfer Control Register */
#define REG_USART1_PTSR (*(RoReg*)0x40028124U) /**< \brief (USART1) Transfer Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAM4S_USART1_INSTANCE_ */