/* ----------------------------------------------------------------------------
 *         SAM Software Package License
 * ----------------------------------------------------------------------------
 * Copyright (c) 2012, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following condition is met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

#ifndef _SAM3S8_SUPC_COMPONENT_
#define _SAM3S8_SUPC_COMPONENT_

/* ============================================================================= */
/**  SOFTWARE API DEFINITION FOR Supply Controller */
/* ============================================================================= */
/** \addtogroup SAM3S8_SUPC Supply Controller */
/*@{*/

#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
/** \brief Supc hardware registers */
typedef struct {
  WoReg SUPC_CR;   /**< \brief (Supc Offset: 0x00) Supply Controller Control Register */
  RwReg SUPC_SMMR; /**< \brief (Supc Offset: 0x04) Supply Controller Supply Monitor Mode Register */
  RwReg SUPC_MR;   /**< \brief (Supc Offset: 0x08) Supply Controller Mode Register */
  RwReg SUPC_WUMR; /**< \brief (Supc Offset: 0x0C) Supply Controller Wake Up Mode Register */
  RwReg SUPC_WUIR; /**< \brief (Supc Offset: 0x10) Supply Controller Wake Up Inputs Register */
  RoReg SUPC_SR;   /**< \brief (Supc Offset: 0x14) Supply Controller Status Register */
} Supc;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* -------- SUPC_CR : (SUPC Offset: 0x00) Supply Controller Control Register -------- */
#define SUPC_CR_VROFF (0x1u << 2) /**< \brief (SUPC_CR) Voltage Regulator Off */
#define   SUPC_CR_VROFF_NO_EFFECT (0x0u << 2) /**< \brief (SUPC_CR) no effect. */
#define   SUPC_CR_VROFF_STOP_VREG (0x1u << 2) /**< \brief (SUPC_CR) if KEY is correct, asserts vddcore_nreset and stops the voltage regulator. */
#define SUPC_CR_XTALSEL (0x1u << 3) /**< \brief (SUPC_CR) Crystal Oscillator Select */
#define   SUPC_CR_XTALSEL_NO_EFFECT (0x0u << 3) /**< \brief (SUPC_CR) no effect. */
#define   SUPC_CR_XTALSEL_CRYSTAL_SEL (0x1u << 3) /**< \brief (SUPC_CR) if KEY is correct, switches the slow clock on the crystal oscillator output. */
#define SUPC_CR_KEY_Pos 24
#define SUPC_CR_KEY_Msk (0xffu << SUPC_CR_KEY_Pos) /**< \brief (SUPC_CR) Password */
#define SUPC_CR_KEY(value) ((SUPC_CR_KEY_Msk & ((value) << SUPC_CR_KEY_Pos)))
/* -------- SUPC_SMMR : (SUPC Offset: 0x04) Supply Controller Supply Monitor Mode Register -------- */
#define SUPC_SMMR_SMTH_Pos 0
#define SUPC_SMMR_SMTH_Msk (0xfu << SUPC_SMMR_SMTH_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Threshold */
#define   SUPC_SMMR_SMTH_1_9V (0x0u << 0) /**< \brief (SUPC_SMMR) 1.9 V */
#define   SUPC_SMMR_SMTH_2_0V (0x1u << 0) /**< \brief (SUPC_SMMR) 2.0 V */
#define   SUPC_SMMR_SMTH_2_1V (0x2u << 0) /**< \brief (SUPC_SMMR) 2.1 V */
#define   SUPC_SMMR_SMTH_2_2V (0x3u << 0) /**< \brief (SUPC_SMMR) 2.2 V */
#define   SUPC_SMMR_SMTH_2_3V (0x4u << 0) /**< \brief (SUPC_SMMR) 2.3 V */
#define   SUPC_SMMR_SMTH_2_4V (0x5u << 0) /**< \brief (SUPC_SMMR) 2.4 V */
#define   SUPC_SMMR_SMTH_2_5V (0x6u << 0) /**< \brief (SUPC_SMMR) 2.5 V */
#define   SUPC_SMMR_SMTH_2_6V (0x7u << 0) /**< \brief (SUPC_SMMR) 2.6 V */
#define   SUPC_SMMR_SMTH_2_7V (0x8u << 0) /**< \brief (SUPC_SMMR) 2.7 V */
#define   SUPC_SMMR_SMTH_2_8V (0x9u << 0) /**< \brief (SUPC_SMMR) 2.8 V */
#define   SUPC_SMMR_SMTH_2_9V (0xAu << 0) /**< \brief (SUPC_SMMR) 2.9 V */
#define   SUPC_SMMR_SMTH_3_0V (0xBu << 0) /**< \brief (SUPC_SMMR) 3.0 V */
#define   SUPC_SMMR_SMTH_3_1V (0xCu << 0) /**< \brief (SUPC_SMMR) 3.1 V */
#define   SUPC_SMMR_SMTH_3_2V (0xDu << 0) /**< \brief (SUPC_SMMR) 3.2 V */
#define   SUPC_SMMR_SMTH_3_3V (0xEu << 0) /**< \brief (SUPC_SMMR) 3.3 V */
#define   SUPC_SMMR_SMTH_3_4V (0xFu << 0) /**< \brief (SUPC_SMMR) 3.4 V */
#define SUPC_SMMR_SMSMPL_Pos 8
#define SUPC_SMMR_SMSMPL_Msk (0x7u << SUPC_SMMR_SMSMPL_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Sampling Period */
#define   SUPC_SMMR_SMSMPL_SMD (0x0u << 8) /**< \brief (SUPC_SMMR) Supply Monitor disabled */
#define   SUPC_SMMR_SMSMPL_CSM (0x1u << 8) /**< \brief (SUPC_SMMR) Continuous Supply Monitor */
#define   SUPC_SMMR_SMSMPL_32SLCK (0x2u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 32 SLCK periods */
#define   SUPC_SMMR_SMSMPL_256SLCK (0x3u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 256 SLCK periods */
#define   SUPC_SMMR_SMSMPL_2048SLCK (0x4u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 2,048 SLCK periods */
#define SUPC_SMMR_SMRSTEN (0x1u << 12) /**< \brief (SUPC_SMMR) Supply Monitor Reset Enable */
#define   SUPC_SMMR_SMRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_SMMR) the core reset signal "vddcore_nreset" is not affected when a supply monitor detection occurs. */
#define   SUPC_SMMR_SMRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_SMMR) the core reset signal, vddcore_nreset is asserted when a supply monitor detection occurs. */
#define SUPC_SMMR_SMIEN (0x1u << 13) /**< \brief (SUPC_SMMR) Supply Monitor Interrupt Enable */
#define   SUPC_SMMR_SMIEN_NOT_ENABLE (0x0u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is not affected when a supply monitor detection occurs. */
#define   SUPC_SMMR_SMIEN_ENABLE (0x1u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is asserted when a supply monitor detection occurs. */
/* -------- SUPC_MR : (SUPC Offset: 0x08) Supply Controller Mode Register -------- */
#define SUPC_MR_BODRSTEN (0x1u << 12) /**< \brief (SUPC_MR) Brownout Detector Reset Enable */
#define   SUPC_MR_BODRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_MR) the core reset signal "vddcore_nreset" is not affected when a brownout detection occurs. */
#define   SUPC_MR_BODRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_MR) the core reset signal, vddcore_nreset is asserted when a brownout detection occurs. */
#define SUPC_MR_BODDIS (0x1u << 13) /**< \brief (SUPC_MR) Brownout Detector Disable */
#define   SUPC_MR_BODDIS_ENABLE (0x0u << 13) /**< \brief (SUPC_MR) the core brownout detector is enabled. */
#define   SUPC_MR_BODDIS_DISABLE (0x1u << 13) /**< \brief (SUPC_MR) the core brownout detector is disabled. */
#define SUPC_MR_ONREG (0x1u << 14) /**< \brief (SUPC_MR) Voltage Regulator enable */
#define   SUPC_MR_ONREG_ONREG_UNUSED (0x0u << 14) /**< \brief (SUPC_MR) Voltage Regulator is not used */
#define   SUPC_MR_ONREG_ONREG_USED (0x1u << 14) /**< \brief (SUPC_MR) Voltage Regulator is used */
#define SUPC_MR_OSCBYPASS (0x1u << 20) /**< \brief (SUPC_MR) Oscillator Bypass */
#define   SUPC_MR_OSCBYPASS_NO_EFFECT (0x0u << 20) /**< \brief (SUPC_MR) no effect. Clock selection depends on XTALSEL value. */
#define   SUPC_MR_OSCBYPASS_BYPASS (0x1u << 20) /**< \brief (SUPC_MR) the 32-KHz XTAL oscillator is selected and is put in bypass mode. */
#define SUPC_MR_KEY_Pos 24
#define SUPC_MR_KEY_Msk (0xffu << SUPC_MR_KEY_Pos) /**< \brief (SUPC_MR) Password Key */
#define SUPC_MR_KEY(value) ((SUPC_MR_KEY_Msk & ((value) << SUPC_MR_KEY_Pos)))
/* -------- SUPC_WUMR : (SUPC Offset: 0x0C) Supply Controller Wake Up Mode Register -------- */
#define SUPC_WUMR_SMEN (0x1u << 1) /**< \brief (SUPC_WUMR) Supply Monitor Wake Up Enable */
#define   SUPC_WUMR_SMEN_NOT_ENABLE (0x0u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection has no wake up effect. */
#define   SUPC_WUMR_SMEN_ENABLE (0x1u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection forces the wake up of the core power supply. */
#define SUPC_WUMR_RTTEN (0x1u << 2) /**< \brief (SUPC_WUMR) Real Time Timer Wake Up Enable */
#define   SUPC_WUMR_RTTEN_NOT_ENABLE (0x0u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal has no wake up effect. */
#define   SUPC_WUMR_RTTEN_ENABLE (0x1u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal forces the wake up of the core power supply. */
#define SUPC_WUMR_RTCEN (0x1u << 3) /**< \brief (SUPC_WUMR) Real Time Clock Wake Up Enable */
#define   SUPC_WUMR_RTCEN_NOT_ENABLE (0x0u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal has no wake up effect. */
#define   SUPC_WUMR_RTCEN_ENABLE (0x1u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal forces the wake up of the core power supply. */
#define SUPC_WUMR_LPDBCEN0 (0x1u << 5) /**< \brief (SUPC_WUMR) Low power Debouncer ENable WKUP0 */
#define   SUPC_WUMR_LPDBCEN0_NOT_ENABLE (0x0u << 5) /**< \brief (SUPC_WUMR) the WKUP0 input pin is not connected with low power debouncer. */
#define   SUPC_WUMR_LPDBCEN0_ENABLE (0x1u << 5) /**< \brief (SUPC_WUMR) the WKUP0 input pin is connected with low power debouncer and can force a core wake up. */
#define SUPC_WUMR_LPDBCEN1 (0x1u << 6) /**< \brief (SUPC_WUMR) Low power Debouncer ENable WKUP1 */
#define   SUPC_WUMR_LPDBCEN1_NOT_ENABLE (0x0u << 6) /**< \brief (SUPC_WUMR) the WKUP1input pin is not connected with low power debouncer. */
#define   SUPC_WUMR_LPDBCEN1_ENABLE (0x1u << 6) /**< \brief (SUPC_WUMR) the WKUP1 input pin is connected with low power debouncer and can force a core wake up. */
#define SUPC_WUMR_LPDBCCLR (0x1u << 7) /**< \brief (SUPC_WUMR) Low power Debouncer Clear */
#define   SUPC_WUMR_LPDBCCLR_NOT_ENABLE (0x0u << 7) /**< \brief (SUPC_WUMR) a low power debounce event does not create an immediate clear on first half GPBR registers. */
#define   SUPC_WUMR_LPDBCCLR_ENABLE (0x1u << 7) /**< \brief (SUPC_WUMR) a low power debounce event on WKUP0 or WKUP1 generates an immediate clear on first half GPBR registers. */
#define SUPC_WUMR_WKUPDBC_Pos 12
#define SUPC_WUMR_WKUPDBC_Msk (0x7u << SUPC_WUMR_WKUPDBC_Pos) /**< \brief (SUPC_WUMR) Wake Up Inputs Debouncer Period */
#define   SUPC_WUMR_WKUPDBC_IMMEDIATE (0x0u << 12) /**< \brief (SUPC_WUMR) Immediate, no debouncing, detected active at least on one Slow Clock edge. */
#define   SUPC_WUMR_WKUPDBC_3_SCLK (0x1u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 3 SLCK periods */
#define   SUPC_WUMR_WKUPDBC_32_SCLK (0x2u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32 SLCK periods */
#define   SUPC_WUMR_WKUPDBC_512_SCLK (0x3u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 512 SLCK periods */
#define   SUPC_WUMR_WKUPDBC_4096_SCLK (0x4u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 4,096 SLCK periods */
#define   SUPC_WUMR_WKUPDBC_32768_SCLK (0x5u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32,768 SLCK periods */
#define SUPC_WUMR_LPDBC_Pos 16
#define SUPC_WUMR_LPDBC_Msk (0x7u << SUPC_WUMR_LPDBC_Pos) /**< \brief (SUPC_WUMR) Low Power DeBounCer Period */
#define   SUPC_WUMR_LPDBC_DISABLE (0x0u << 16) /**< \brief (SUPC_WUMR) Disable the low power debouncer. */
#define   SUPC_WUMR_LPDBC_2_RTCOUT0 (0x1u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 2 RTCOUT0 periods */
#define   SUPC_WUMR_LPDBC_3_RTCOUT0 (0x2u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 3 RTCOUT0 periods */
#define   SUPC_WUMR_LPDBC_4_RTCOUT0 (0x3u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 4 RTCOUT0 periods */
#define   SUPC_WUMR_LPDBC_5_RTCOUT0 (0x4u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 5 RTCOUT0 periods */
#define   SUPC_WUMR_LPDBC_6_RTCOUT0 (0x5u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 6 RTCOUT0 periods */
#define   SUPC_WUMR_LPDBC_7_RTCOUT0 (0x6u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 7 RTCOUT0 periods */
#define   SUPC_WUMR_LPDBC_8_RTCOUT0 (0x7u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 8 RTCOUT0 periods */
/* -------- SUPC_WUIR : (SUPC Offset: 0x10) Supply Controller Wake Up Inputs Register -------- */
#define SUPC_WUIR_WKUPEN0 (0x1u << 0) /**< \brief (SUPC_WUIR) Wake Up Input Enable 0 */
#define   SUPC_WUIR_WKUPEN0_DISABLE (0x0u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN0_ENABLE (0x1u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN1 (0x1u << 1) /**< \brief (SUPC_WUIR) Wake Up Input Enable 1 */
#define   SUPC_WUIR_WKUPEN1_DISABLE (0x0u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN1_ENABLE (0x1u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN2 (0x1u << 2) /**< \brief (SUPC_WUIR) Wake Up Input Enable 2 */
#define   SUPC_WUIR_WKUPEN2_DISABLE (0x0u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN2_ENABLE (0x1u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN3 (0x1u << 3) /**< \brief (SUPC_WUIR) Wake Up Input Enable 3 */
#define   SUPC_WUIR_WKUPEN3_DISABLE (0x0u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN3_ENABLE (0x1u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN4 (0x1u << 4) /**< \brief (SUPC_WUIR) Wake Up Input Enable 4 */
#define   SUPC_WUIR_WKUPEN4_DISABLE (0x0u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN4_ENABLE (0x1u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN5 (0x1u << 5) /**< \brief (SUPC_WUIR) Wake Up Input Enable 5 */
#define   SUPC_WUIR_WKUPEN5_DISABLE (0x0u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN5_ENABLE (0x1u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN6 (0x1u << 6) /**< \brief (SUPC_WUIR) Wake Up Input Enable 6 */
#define   SUPC_WUIR_WKUPEN6_DISABLE (0x0u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN6_ENABLE (0x1u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN7 (0x1u << 7) /**< \brief (SUPC_WUIR) Wake Up Input Enable 7 */
#define   SUPC_WUIR_WKUPEN7_DISABLE (0x0u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN7_ENABLE (0x1u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN8 (0x1u << 8) /**< \brief (SUPC_WUIR) Wake Up Input Enable 8 */
#define   SUPC_WUIR_WKUPEN8_DISABLE (0x0u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN8_ENABLE (0x1u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN9 (0x1u << 9) /**< \brief (SUPC_WUIR) Wake Up Input Enable 9 */
#define   SUPC_WUIR_WKUPEN9_DISABLE (0x0u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN9_ENABLE (0x1u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN10 (0x1u << 10) /**< \brief (SUPC_WUIR) Wake Up Input Enable 10 */
#define   SUPC_WUIR_WKUPEN10_DISABLE (0x0u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN10_ENABLE (0x1u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN11 (0x1u << 11) /**< \brief (SUPC_WUIR) Wake Up Input Enable 11 */
#define   SUPC_WUIR_WKUPEN11_DISABLE (0x0u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN11_ENABLE (0x1u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN12 (0x1u << 12) /**< \brief (SUPC_WUIR) Wake Up Input Enable 12 */
#define   SUPC_WUIR_WKUPEN12_DISABLE (0x0u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN12_ENABLE (0x1u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN13 (0x1u << 13) /**< \brief (SUPC_WUIR) Wake Up Input Enable 13 */
#define   SUPC_WUIR_WKUPEN13_DISABLE (0x0u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN13_ENABLE (0x1u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN14 (0x1u << 14) /**< \brief (SUPC_WUIR) Wake Up Input Enable 14 */
#define   SUPC_WUIR_WKUPEN14_DISABLE (0x0u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN14_ENABLE (0x1u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPEN15 (0x1u << 15) /**< \brief (SUPC_WUIR) Wake Up Input Enable 15 */
#define   SUPC_WUIR_WKUPEN15_DISABLE (0x0u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
#define   SUPC_WUIR_WKUPEN15_ENABLE (0x1u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT0 (0x1u << 16) /**< \brief (SUPC_WUIR) Wake Up Input Type 0 */
#define   SUPC_WUIR_WKUPT0_LOW (0x0u << 16) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT0_HIGH (0x1u << 16) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT1 (0x1u << 17) /**< \brief (SUPC_WUIR) Wake Up Input Type 1 */
#define   SUPC_WUIR_WKUPT1_LOW (0x0u << 17) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT1_HIGH (0x1u << 17) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT2 (0x1u << 18) /**< \brief (SUPC_WUIR) Wake Up Input Type 2 */
#define   SUPC_WUIR_WKUPT2_LOW (0x0u << 18) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT2_HIGH (0x1u << 18) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT3 (0x1u << 19) /**< \brief (SUPC_WUIR) Wake Up Input Type 3 */
#define   SUPC_WUIR_WKUPT3_LOW (0x0u << 19) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT3_HIGH (0x1u << 19) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT4 (0x1u << 20) /**< \brief (SUPC_WUIR) Wake Up Input Type 4 */
#define   SUPC_WUIR_WKUPT4_LOW (0x0u << 20) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT4_HIGH (0x1u << 20) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT5 (0x1u << 21) /**< \brief (SUPC_WUIR) Wake Up Input Type 5 */
#define   SUPC_WUIR_WKUPT5_LOW (0x0u << 21) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT5_HIGH (0x1u << 21) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT6 (0x1u << 22) /**< \brief (SUPC_WUIR) Wake Up Input Type 6 */
#define   SUPC_WUIR_WKUPT6_LOW (0x0u << 22) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT6_HIGH (0x1u << 22) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT7 (0x1u << 23) /**< \brief (SUPC_WUIR) Wake Up Input Type 7 */
#define   SUPC_WUIR_WKUPT7_LOW (0x0u << 23) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT7_HIGH (0x1u << 23) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT8 (0x1u << 24) /**< \brief (SUPC_WUIR) Wake Up Input Type 8 */
#define   SUPC_WUIR_WKUPT8_LOW (0x0u << 24) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT8_HIGH (0x1u << 24) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT9 (0x1u << 25) /**< \brief (SUPC_WUIR) Wake Up Input Type 9 */
#define   SUPC_WUIR_WKUPT9_LOW (0x0u << 25) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT9_HIGH (0x1u << 25) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT10 (0x1u << 26) /**< \brief (SUPC_WUIR) Wake Up Input Type 10 */
#define   SUPC_WUIR_WKUPT10_LOW (0x0u << 26) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT10_HIGH (0x1u << 26) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT11 (0x1u << 27) /**< \brief (SUPC_WUIR) Wake Up Input Type 11 */
#define   SUPC_WUIR_WKUPT11_LOW (0x0u << 27) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT11_HIGH (0x1u << 27) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT12 (0x1u << 28) /**< \brief (SUPC_WUIR) Wake Up Input Type 12 */
#define   SUPC_WUIR_WKUPT12_LOW (0x0u << 28) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT12_HIGH (0x1u << 28) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT13 (0x1u << 29) /**< \brief (SUPC_WUIR) Wake Up Input Type 13 */
#define   SUPC_WUIR_WKUPT13_LOW (0x0u << 29) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT13_HIGH (0x1u << 29) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT14 (0x1u << 30) /**< \brief (SUPC_WUIR) Wake Up Input Type 14 */
#define   SUPC_WUIR_WKUPT14_LOW (0x0u << 30) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT14_HIGH (0x1u << 30) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
#define SUPC_WUIR_WKUPT15 (0x1u << 31) /**< \brief (SUPC_WUIR) Wake Up Input Type 15 */
#define   SUPC_WUIR_WKUPT15_LOW (0x0u << 31) /**< \brief (SUPC_WUIR) a low level for a period defined by WKUPDBC on the corresponding wake-up input forces the wake up of the core power supply. */
#define   SUPC_WUIR_WKUPT15_HIGH (0x1u << 31) /**< \brief (SUPC_WUIR) a high levelfor a period defined by WKUPDBC on the correspond-ing wake-up input forces the wake up of the core power supply. */
/* -------- SUPC_SR : (SUPC Offset: 0x14) Supply Controller Status Register -------- */
#define SUPC_SR_WKUPS (0x1u << 1) /**< \brief (SUPC_SR) WKUP Wake Up Status */
#define   SUPC_SR_WKUPS_NO (0x0u << 1) /**< \brief (SUPC_SR) no wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */
#define   SUPC_SR_WKUPS_PRESENT (0x1u << 1) /**< \brief (SUPC_SR) at least one wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */
#define SUPC_SR_SMWS (0x1u << 2) /**< \brief (SUPC_SR) Supply Monitor Detection Wake Up Status */
#define   SUPC_SR_SMWS_NO (0x0u << 2) /**< \brief (SUPC_SR) no wake up due to a supply monitor detection has occurred since the last read of SUPC_SR. */
#define   SUPC_SR_SMWS_PRESENT (0x1u << 2) /**< \brief (SUPC_SR) at least one wake up due to a supply monitor detection has occurred since the last read of SUPC_SR. */
#define SUPC_SR_BODRSTS (0x1u << 3) /**< \brief (SUPC_SR) Brownout Detector Reset Status */
#define   SUPC_SR_BODRSTS_NO (0x0u << 3) /**< \brief (SUPC_SR) no core brownout rising edge event has been detected since the last read of the SUPC_SR. */
#define   SUPC_SR_BODRSTS_PRESENT (0x1u << 3) /**< \brief (SUPC_SR) at least one brownout output rising edge event has been detected since the last read of the SUPC_SR. */
#define SUPC_SR_SMRSTS (0x1u << 4) /**< \brief (SUPC_SR) Supply Monitor Reset Status */
#define   SUPC_SR_SMRSTS_NO (0x0u << 4) /**< \brief (SUPC_SR) no supply monitor detection has generated a core reset since the last read of the SUPC_SR. */
#define   SUPC_SR_SMRSTS_PRESENT (0x1u << 4) /**< \brief (SUPC_SR) at least one supply monitor detection has generated a core reset since the last read of the SUPC_SR. */
#define SUPC_SR_SMS (0x1u << 5) /**< \brief (SUPC_SR) Supply Monitor Status */
#define   SUPC_SR_SMS_NO (0x0u << 5) /**< \brief (SUPC_SR) no supply monitor detection since the last read of SUPC_SR. */
#define   SUPC_SR_SMS_PRESENT (0x1u << 5) /**< \brief (SUPC_SR) at least one supply monitor detection since the last read of SUPC_SR. */
#define SUPC_SR_SMOS (0x1u << 6) /**< \brief (SUPC_SR) Supply Monitor Output Status */
#define   SUPC_SR_SMOS_HIGH (0x0u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO higher than its threshold at its last measurement. */
#define   SUPC_SR_SMOS_LOW (0x1u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO lower than its threshold at its last measurement. */
#define SUPC_SR_OSCSEL (0x1u << 7) /**< \brief (SUPC_SR) 32-kHz Oscillator Selection Status */
#define   SUPC_SR_OSCSEL_RC (0x0u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the embedded 32-kHz RC oscillator. */
#define   SUPC_SR_OSCSEL_CRYST (0x1u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the 32-kHz crystal oscillator. */
#define SUPC_SR_LPDBCS0 (0x1u << 13) /**< \brief (SUPC_SR) Low Power Debouncer Wake Up Status on WKUP0 */
#define   SUPC_SR_LPDBCS0_NO (0x0u << 13) /**< \brief (SUPC_SR) no wake up due to the assertion of the WKUP0 pin has occurred since the last read of SUPC_SR. */
#define   SUPC_SR_LPDBCS0_PRESENT (0x1u << 13) /**< \brief (SUPC_SR) at least one wake up due to the assertion of the WKUP0 pin has occurred since the last read of SUPC_SR. */
#define SUPC_SR_LPDBCS1 (0x1u << 14) /**< \brief (SUPC_SR) Low Power Debouncer Wake Up Status on WKUP1 */
#define   SUPC_SR_LPDBCS1_NO (0x0u << 14) /**< \brief (SUPC_SR) no wake up due to the assertion of the WKUP1 pin has occurred since the last read of SUPC_SR. */
#define   SUPC_SR_LPDBCS1_PRESENT (0x1u << 14) /**< \brief (SUPC_SR) at least one wake up due to the assertion of the WKUP1 pin has occurred since the last read of SUPC_SR. */
#define SUPC_SR_WKUPIS0 (0x1u << 16) /**< \brief (SUPC_SR) WKUP Input Status 0 */
#define   SUPC_SR_WKUPIS0_DIS (0x0u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS0_EN (0x1u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS1 (0x1u << 17) /**< \brief (SUPC_SR) WKUP Input Status 1 */
#define   SUPC_SR_WKUPIS1_DIS (0x0u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS1_EN (0x1u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS2 (0x1u << 18) /**< \brief (SUPC_SR) WKUP Input Status 2 */
#define   SUPC_SR_WKUPIS2_DIS (0x0u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS2_EN (0x1u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS3 (0x1u << 19) /**< \brief (SUPC_SR) WKUP Input Status 3 */
#define   SUPC_SR_WKUPIS3_DIS (0x0u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS3_EN (0x1u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS4 (0x1u << 20) /**< \brief (SUPC_SR) WKUP Input Status 4 */
#define   SUPC_SR_WKUPIS4_DIS (0x0u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS4_EN (0x1u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS5 (0x1u << 21) /**< \brief (SUPC_SR) WKUP Input Status 5 */
#define   SUPC_SR_WKUPIS5_DIS (0x0u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS5_EN (0x1u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS6 (0x1u << 22) /**< \brief (SUPC_SR) WKUP Input Status 6 */
#define   SUPC_SR_WKUPIS6_DIS (0x0u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS6_EN (0x1u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS7 (0x1u << 23) /**< \brief (SUPC_SR) WKUP Input Status 7 */
#define   SUPC_SR_WKUPIS7_DIS (0x0u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS7_EN (0x1u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS8 (0x1u << 24) /**< \brief (SUPC_SR) WKUP Input Status 8 */
#define   SUPC_SR_WKUPIS8_DIS (0x0u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS8_EN (0x1u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS9 (0x1u << 25) /**< \brief (SUPC_SR) WKUP Input Status 9 */
#define   SUPC_SR_WKUPIS9_DIS (0x0u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS9_EN (0x1u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS10 (0x1u << 26) /**< \brief (SUPC_SR) WKUP Input Status 10 */
#define   SUPC_SR_WKUPIS10_DIS (0x0u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS10_EN (0x1u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS11 (0x1u << 27) /**< \brief (SUPC_SR) WKUP Input Status 11 */
#define   SUPC_SR_WKUPIS11_DIS (0x0u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS11_EN (0x1u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS12 (0x1u << 28) /**< \brief (SUPC_SR) WKUP Input Status 12 */
#define   SUPC_SR_WKUPIS12_DIS (0x0u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS12_EN (0x1u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS13 (0x1u << 29) /**< \brief (SUPC_SR) WKUP Input Status 13 */
#define   SUPC_SR_WKUPIS13_DIS (0x0u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS13_EN (0x1u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS14 (0x1u << 30) /**< \brief (SUPC_SR) WKUP Input Status 14 */
#define   SUPC_SR_WKUPIS14_DIS (0x0u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS14_EN (0x1u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
#define SUPC_SR_WKUPIS15 (0x1u << 31) /**< \brief (SUPC_SR) WKUP Input Status 15 */
#define   SUPC_SR_WKUPIS15_DIS (0x0u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
#define   SUPC_SR_WKUPIS15_EN (0x1u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */

/*@}*/


#endif /* _SAM3S8_SUPC_COMPONENT_ */