/* ----------------------------------------------------------------------------
 *         SAM Software Package License
 * ----------------------------------------------------------------------------
 * Copyright (c) 2012, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following condition is met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

#ifndef _SAM3N_PIOB_INSTANCE_
#define _SAM3N_PIOB_INSTANCE_

/* ========== Register definition for PIOB peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_PIOB_PER                (0x400E1000U) /**< \brief (PIOB) PIO Enable Register */
#define REG_PIOB_PDR                (0x400E1004U) /**< \brief (PIOB) PIO Disable Register */
#define REG_PIOB_PSR                (0x400E1008U) /**< \brief (PIOB) PIO Status Register */
#define REG_PIOB_OER                (0x400E1010U) /**< \brief (PIOB) Output Enable Register */
#define REG_PIOB_ODR                (0x400E1014U) /**< \brief (PIOB) Output Disable Register */
#define REG_PIOB_OSR                (0x400E1018U) /**< \brief (PIOB) Output Status Register */
#define REG_PIOB_IFER               (0x400E1020U) /**< \brief (PIOB) Glitch Input Filter Enable Register */
#define REG_PIOB_IFDR               (0x400E1024U) /**< \brief (PIOB) Glitch Input Filter Disable Register */
#define REG_PIOB_IFSR               (0x400E1028U) /**< \brief (PIOB) Glitch Input Filter Status Register */
#define REG_PIOB_SODR               (0x400E1030U) /**< \brief (PIOB) Set Output Data Register */
#define REG_PIOB_CODR               (0x400E1034U) /**< \brief (PIOB) Clear Output Data Register */
#define REG_PIOB_ODSR               (0x400E1038U) /**< \brief (PIOB) Output Data Status Register */
#define REG_PIOB_PDSR               (0x400E103CU) /**< \brief (PIOB) Pin Data Status Register */
#define REG_PIOB_IER                (0x400E1040U) /**< \brief (PIOB) Interrupt Enable Register */
#define REG_PIOB_IDR                (0x400E1044U) /**< \brief (PIOB) Interrupt Disable Register */
#define REG_PIOB_IMR                (0x400E1048U) /**< \brief (PIOB) Interrupt Mask Register */
#define REG_PIOB_ISR                (0x400E104CU) /**< \brief (PIOB) Interrupt Status Register */
#define REG_PIOB_MDER               (0x400E1050U) /**< \brief (PIOB) Multi-driver Enable Register */
#define REG_PIOB_MDDR               (0x400E1054U) /**< \brief (PIOB) Multi-driver Disable Register */
#define REG_PIOB_MDSR               (0x400E1058U) /**< \brief (PIOB) Multi-driver Status Register */
#define REG_PIOB_PUDR               (0x400E1060U) /**< \brief (PIOB) Pull-up Disable Register */
#define REG_PIOB_PUER               (0x400E1064U) /**< \brief (PIOB) Pull-up Enable Register */
#define REG_PIOB_PUSR               (0x400E1068U) /**< \brief (PIOB) Pad Pull-up Status Register */
#define REG_PIOB_ABCDSR             (0x400E1070U) /**< \brief (PIOB) Peripheral Select Register */
#define REG_PIOB_IFSCDR             (0x400E1080U) /**< \brief (PIOB) Input Filter Slow Clock Disable Register */
#define REG_PIOB_IFSCER             (0x400E1084U) /**< \brief (PIOB) Input Filter Slow Clock Enable Register */
#define REG_PIOB_IFSCSR             (0x400E1088U) /**< \brief (PIOB) Input Filter Slow Clock Status Register */
#define REG_PIOB_SCDR               (0x400E108CU) /**< \brief (PIOB) Slow Clock Divider Debouncing Register */
#define REG_PIOB_PPDDR              (0x400E1090U) /**< \brief (PIOB) Pad Pull-down Disable Register */
#define REG_PIOB_PPDER              (0x400E1094U) /**< \brief (PIOB) Pad Pull-down Enable Register */
#define REG_PIOB_PPDSR              (0x400E1098U) /**< \brief (PIOB) Pad Pull-down Status Register */
#define REG_PIOB_OWER               (0x400E10A0U) /**< \brief (PIOB) Output Write Enable */
#define REG_PIOB_OWDR               (0x400E10A4U) /**< \brief (PIOB) Output Write Disable */
#define REG_PIOB_OWSR               (0x400E10A8U) /**< \brief (PIOB) Output Write Status Register */
#define REG_PIOB_AIMER              (0x400E10B0U) /**< \brief (PIOB) Additional Interrupt Modes Enable Register */
#define REG_PIOB_AIMDR              (0x400E10B4U) /**< \brief (PIOB) Additional Interrupt Modes Disables Register */
#define REG_PIOB_AIMMR              (0x400E10B8U) /**< \brief (PIOB) Additional Interrupt Modes Mask Register */
#define REG_PIOB_ESR                (0x400E10C0U) /**< \brief (PIOB) Edge Select Register */
#define REG_PIOB_LSR                (0x400E10C4U) /**< \brief (PIOB) Level Select Register */
#define REG_PIOB_ELSR               (0x400E10C8U) /**< \brief (PIOB) Edge/Level Status Register */
#define REG_PIOB_FELLSR             (0x400E10D0U) /**< \brief (PIOB) Falling Edge/Low Level Select Register */
#define REG_PIOB_REHLSR             (0x400E10D4U) /**< \brief (PIOB) Rising Edge/ High Level Select Register */
#define REG_PIOB_FRLHSR             (0x400E10D8U) /**< \brief (PIOB) Fall/Rise - Low/High Status Register */
#define REG_PIOB_LOCKSR             (0x400E10E0U) /**< \brief (PIOB) Lock Status */
#define REG_PIOB_WPMR               (0x400E10E4U) /**< \brief (PIOB) Write Protect Mode Register */
#define REG_PIOB_WPSR               (0x400E10E8U) /**< \brief (PIOB) Write Protect Status Register */
#define REG_PIOB_SCHMITT            (0x400E1100U) /**< \brief (PIOB) Schmitt Trigger Register */
#else
#define REG_PIOB_PER       (*(WoReg*)0x400E1000U) /**< \brief (PIOB) PIO Enable Register */
#define REG_PIOB_PDR       (*(WoReg*)0x400E1004U) /**< \brief (PIOB) PIO Disable Register */
#define REG_PIOB_PSR       (*(RoReg*)0x400E1008U) /**< \brief (PIOB) PIO Status Register */
#define REG_PIOB_OER       (*(WoReg*)0x400E1010U) /**< \brief (PIOB) Output Enable Register */
#define REG_PIOB_ODR       (*(WoReg*)0x400E1014U) /**< \brief (PIOB) Output Disable Register */
#define REG_PIOB_OSR       (*(RoReg*)0x400E1018U) /**< \brief (PIOB) Output Status Register */
#define REG_PIOB_IFER      (*(WoReg*)0x400E1020U) /**< \brief (PIOB) Glitch Input Filter Enable Register */
#define REG_PIOB_IFDR      (*(WoReg*)0x400E1024U) /**< \brief (PIOB) Glitch Input Filter Disable Register */
#define REG_PIOB_IFSR      (*(RoReg*)0x400E1028U) /**< \brief (PIOB) Glitch Input Filter Status Register */
#define REG_PIOB_SODR      (*(WoReg*)0x400E1030U) /**< \brief (PIOB) Set Output Data Register */
#define REG_PIOB_CODR      (*(WoReg*)0x400E1034U) /**< \brief (PIOB) Clear Output Data Register */
#define REG_PIOB_ODSR      (*(RwReg*)0x400E1038U) /**< \brief (PIOB) Output Data Status Register */
#define REG_PIOB_PDSR      (*(RoReg*)0x400E103CU) /**< \brief (PIOB) Pin Data Status Register */
#define REG_PIOB_IER       (*(WoReg*)0x400E1040U) /**< \brief (PIOB) Interrupt Enable Register */
#define REG_PIOB_IDR       (*(WoReg*)0x400E1044U) /**< \brief (PIOB) Interrupt Disable Register */
#define REG_PIOB_IMR       (*(RoReg*)0x400E1048U) /**< \brief (PIOB) Interrupt Mask Register */
#define REG_PIOB_ISR       (*(RoReg*)0x400E104CU) /**< \brief (PIOB) Interrupt Status Register */
#define REG_PIOB_MDER      (*(WoReg*)0x400E1050U) /**< \brief (PIOB) Multi-driver Enable Register */
#define REG_PIOB_MDDR      (*(WoReg*)0x400E1054U) /**< \brief (PIOB) Multi-driver Disable Register */
#define REG_PIOB_MDSR      (*(RoReg*)0x400E1058U) /**< \brief (PIOB) Multi-driver Status Register */
#define REG_PIOB_PUDR      (*(WoReg*)0x400E1060U) /**< \brief (PIOB) Pull-up Disable Register */
#define REG_PIOB_PUER      (*(WoReg*)0x400E1064U) /**< \brief (PIOB) Pull-up Enable Register */
#define REG_PIOB_PUSR      (*(RoReg*)0x400E1068U) /**< \brief (PIOB) Pad Pull-up Status Register */
#define REG_PIOB_ABCDSR    (*(RwReg*)0x400E1070U) /**< \brief (PIOB) Peripheral Select Register */
#define REG_PIOB_IFSCDR    (*(WoReg*)0x400E1080U) /**< \brief (PIOB) Input Filter Slow Clock Disable Register */
#define REG_PIOB_IFSCER    (*(WoReg*)0x400E1084U) /**< \brief (PIOB) Input Filter Slow Clock Enable Register */
#define REG_PIOB_IFSCSR    (*(RoReg*)0x400E1088U) /**< \brief (PIOB) Input Filter Slow Clock Status Register */
#define REG_PIOB_SCDR      (*(RwReg*)0x400E108CU) /**< \brief (PIOB) Slow Clock Divider Debouncing Register */
#define REG_PIOB_PPDDR     (*(WoReg*)0x400E1090U) /**< \brief (PIOB) Pad Pull-down Disable Register */
#define REG_PIOB_PPDER     (*(WoReg*)0x400E1094U) /**< \brief (PIOB) Pad Pull-down Enable Register */
#define REG_PIOB_PPDSR     (*(RoReg*)0x400E1098U) /**< \brief (PIOB) Pad Pull-down Status Register */
#define REG_PIOB_OWER      (*(WoReg*)0x400E10A0U) /**< \brief (PIOB) Output Write Enable */
#define REG_PIOB_OWDR      (*(WoReg*)0x400E10A4U) /**< \brief (PIOB) Output Write Disable */
#define REG_PIOB_OWSR      (*(RoReg*)0x400E10A8U) /**< \brief (PIOB) Output Write Status Register */
#define REG_PIOB_AIMER     (*(WoReg*)0x400E10B0U) /**< \brief (PIOB) Additional Interrupt Modes Enable Register */
#define REG_PIOB_AIMDR     (*(WoReg*)0x400E10B4U) /**< \brief (PIOB) Additional Interrupt Modes Disables Register */
#define REG_PIOB_AIMMR     (*(RoReg*)0x400E10B8U) /**< \brief (PIOB) Additional Interrupt Modes Mask Register */
#define REG_PIOB_ESR       (*(WoReg*)0x400E10C0U) /**< \brief (PIOB) Edge Select Register */
#define REG_PIOB_LSR       (*(WoReg*)0x400E10C4U) /**< \brief (PIOB) Level Select Register */
#define REG_PIOB_ELSR      (*(RoReg*)0x400E10C8U) /**< \brief (PIOB) Edge/Level Status Register */
#define REG_PIOB_FELLSR    (*(WoReg*)0x400E10D0U) /**< \brief (PIOB) Falling Edge/Low Level Select Register */
#define REG_PIOB_REHLSR    (*(WoReg*)0x400E10D4U) /**< \brief (PIOB) Rising Edge/ High Level Select Register */
#define REG_PIOB_FRLHSR    (*(RoReg*)0x400E10D8U) /**< \brief (PIOB) Fall/Rise - Low/High Status Register */
#define REG_PIOB_LOCKSR    (*(RoReg*)0x400E10E0U) /**< \brief (PIOB) Lock Status */
#define REG_PIOB_WPMR      (*(RwReg*)0x400E10E4U) /**< \brief (PIOB) Write Protect Mode Register */
#define REG_PIOB_WPSR      (*(RoReg*)0x400E10E8U) /**< \brief (PIOB) Write Protect Status Register */
#define REG_PIOB_SCHMITT   (*(RwReg*)0x400E1100U) /**< \brief (PIOB) Schmitt Trigger Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAM3N_PIOB_INSTANCE_ */