# Estonian translations for the Arduino IDE.
# Copyright (C) 2012
# This file is distributed under the same license as the Arduino package.
# Cougar <cougar@random.ee>, 2012.
!=Project-Id-Version\: Arduino 1.0\nReport-Msgid-Bugs-To\: \nPOT-Creation-Date\: 2012-04-14 13\:35+0300\nPO-Revision-Date\: 2012-04-14 13\:52+0300\nLast-Translator\: Cougar <cougar@random.ee>\nLanguage-Team\: Estonian\nLanguage\: et\nMIME-Version\: 1.0\nContent-Type\: text/plain; charset\=UTF-8\nContent-Transfer-Encoding\: 8bit\nPlural-Forms\: nplurals\=2; plural\=(n \!\= 1);\nX-Generator\: Virtaal 0.7.1\n

#: Editor.java:366
No\ files\ were\ added\ to\ the\ sketch.=Visandisse pole faile lisatud.

#: Editor.java:369 Sketch.java:996
One\ file\ added\ to\ the\ sketch.=Visandisse on lisatud \u00fcks fail.

#: Editor.java:373
#, java-format
{0}\ files\ added\ to\ the\ sketch.=Visandisse on lisatud {0} faili.

#: Editor.java:484
File=Fail

#: Editor.java:486 EditorToolbar.java:41
New=Uus

#: Editor.java:494 Base.java:903
Open...=Ava...

#: Editor.java:503
Sketchbook=Visandid

#: Editor.java:509
Examples=N\u00e4ited

#: Editor.java:514 Editor.java:1977
Close=Sulge

#: Editor.java:522 Editor.java:2017 Editor.java:2421 EditorToolbar.java:41
#: EditorToolbar.java:46
Save=Salvesta

#: Editor.java:530
Save\ As...=Salvesta kui...

#: Editor.java:538 EditorToolbar.java:41
Upload=Laadi \u00fcles

#: Editor.java:546 EditorToolbar.java:46
Upload\ Using\ Programmer=Laadi \u00fcles programmaatori kaudu

#: Editor.java:556
Page\ Setup=Lehek\u00fclje s\u00e4tted

#: Editor.java:564
Print=Prindi

#: Editor.java:576 Preferences.java:279
Preferences=Eelistused

#: Editor.java:586 Base.java:782
Quit=V\u00e4lju

#: Editor.java:600
Sketch=Visand

#: Editor.java:602
Verify\ /\ Compile=Kontrolli / Kompileeri

#: Editor.java:629
Import\ Library...=Laadi teek...

#: Editor.java:634
Show\ Sketch\ Folder=N\u00e4ita visandite kausta

#: Editor.java:643
Add\ File...=Lisa fail...

#: Editor.java:656
Tools=T\u00f6\u00f6riistad

#: Editor.java:662 EditorToolbar.java:41 EditorToolbar.java:46
Serial\ Monitor=Jadapordi monitor

#: Editor.java:682
Board=Plaat

#: Editor.java:690
Serial\ Port=Jadaport

#: Editor.java:695
Programmer=Pogrammaator

#: Editor.java:699
Burn\ Bootloader=Kirjuta buudilaadur

#: Editor.java:923
serialMenu\ is\ null=serialMenu on null

#: Editor.java:927 Editor.java:934
name\ is\ null=name on null

#: Editor.java:986
error\ retrieving\ port\ list=Portide nimekirja koostamine eba\u00f5nnestus

#: Editor.java:1002
Help=Abi

#: Editor.java:1041
Getting\ Started=Alustamine

#: Editor.java:1049
Environment=T\u00f6\u00f6keskkond

#: Editor.java:1057
Troubleshooting=Probleemide lahendamine

#: Editor.java:1065
Reference=Seletused

#: Editor.java:1073 Editor.java:2728
Find\ in\ Reference=Registriviide

#: Editor.java:1083
Frequently\ Asked\ Questions=Korduma Kippuvad K\u00fcsimused

#: Editor.java:1091
Visit\ Arduino.cc=K\u00fclasta Arduino.cc

#: Editor.java:1094
http\://arduino.cc/=http\://arduino.cc/

#: Editor.java:1102
About\ Arduino=Arduinost

#: Editor.java:1116
Edit=Redigeeri

#: Editor.java:1119 Editor.java:1341
Undo=V\u00f5ta tagasi

#: Editor.java:1124 Editor.java:1126 Editor.java:1376
Redo=Tee uuesti

#: Editor.java:1135 Editor.java:2652
Cut=L\u00f5ika

#: Editor.java:1143 Editor.java:2660
Copy=Kopeeri

#: Editor.java:1151 Editor.java:2668
Copy\ for\ Forum=Kopeeri foorumi jaoks

#: Editor.java:1163 Editor.java:2676
Copy\ as\ HTML=Kopeeri HTML-ina

#: Editor.java:1175 Editor.java:2684
Paste=Aseta

#: Editor.java:1184 Editor.java:2692
Select\ All=Vali k\u00f5ik

#: Editor.java:1194 Editor.java:2702
Comment/Uncomment=Kommentaari lisamine/eemaldamine

#: Editor.java:1202 Editor.java:2710
Increase\ Indent=Suurenda taanet

#: Editor.java:1210 Editor.java:2718
Decrease\ Indent=V\u00e4henda taanet

#: Editor.java:1220
Find...=Otsi...

#: Editor.java:1235
Find\ Next=Otsi j\u00e4rgmine

#: Editor.java:1245
Find\ Previous=Otsi eelmine

#: Editor.java:1255
Use\ Selection\ For\ Find=Kasuta otsimiseks valikut

#: Editor.java:1816
First\ select\ a\ word\ to\ find\ in\ the\ reference.=Juhendist otsimiseks m\u00e4rgi k\u00f5igepealt s\u00f5na.

#: Editor.java:1823
#, java-format
No\ reference\ available\ for\ "{0}"="{0}" kohta juhend puudub

#: Editor.java:1826
#, java-format
{0}.html={0}.html

#: Editor.java:1843 Sketch.java:1647
Compiling\ sketch...=Visandi kompileerimine...

#: Editor.java:1864 Editor.java:1881
Done\ compiling.=Kompileeritud.

#: Editor.java:1973
#, java-format
Save\ changes\ to\ "{0}"?\ \ =Salvesta muudatused faili "{0}"

#: Editor.java:2006
<html>\ <head>\ <style\ type\="text/css">b\ {\ font\:\ 13pt\ "Lucida\ Grande"\ }p\ {\ font\:\ 11pt\ "Lucida\ Grande";\ margin-top\:\ 8px\ }</style>\ </head><b>Do\ you\ want\ to\ save\ changes\ to\ this\ sketch<BR>\ before\ closing?</b><p>If\ you\ don't\ save,\ your\ changes\ will\ be\ lost.=<html> <head> <style type\="text/css">b { font\: 13pt "Lucida Grande" }p { font\: 11pt "Lucida Grande"; margin-top\: 8px }</style> </head><b>Kas sa soovid muudatused enne sulgemist salvestada?</b><p>salvestamata muudatused l\u00e4hevad kaduma

#: Editor.java:2017 Editor.java:2098 Editor.java:2418 Sketch.java:589
#: Sketch.java:741 Sketch.java:1046 Preferences.java:78
Cancel=Loobu

#: Editor.java:2017
Don't\ Save=\u00c4ra salvesta

#: Editor.java:2089
Bad\ file\ selected=Vigane fail valitud

#: Editor.java:2090
Processing\ can\ only\ open\ its\ own\ sketches\nand\ other\ files\ ending\ in\ .ino\ or\ .pde=Avada saab ainult oma visandeid ning .ino v\u00f5i .pde laienditega faile.

#: Editor.java:2098 Editor.java:2418 Sketch.java:589 Sketch.java:741
#: Sketch.java:1046 Preferences.java:79
OK=Olgu

#: Editor.java:2100
#, java-format
The\ file\ "{0}"\ needs\ to\ be\ inside\na\ sketch\ folder\ named\ "{1}".\nCreate\ this\ folder,\ move\ the\ file,\ and\ continue?="{0}" peab asuma visandite kaustas "{1}".\nKas tekitan selle kausta ning liigutan faili sinna?

#: Editor.java:2109
Moving=Liigutamine

#: Editor.java:2120 Editor.java:2131 Editor.java:2141 Editor.java:2159
#: Sketch.java:479 Sketch.java:485 Sketch.java:500 Sketch.java:507
#: Sketch.java:530 Sketch.java:547 Base.java:1861 Preferences.java:240
Error=Viga

#: Editor.java:2122
#, java-format
A\ folder\ named\ "{0}"\ already\ exists.\ Can't\ open\ sketch.=Kaust "{0}" on juba olemas. Ei saa visandit avada.

#: Editor.java:2132
Could\ not\ create\ the\ sketch\ folder.=Visandi kausta pole v\u00f5imalik luua

#: Editor.java:2141
Could\ not\ copy\ to\ a\ proper\ location.=Etten\u00e4htud kohta ei saa kopeerida.

#: Editor.java:2159
Could\ not\ create\ the\ sketch.=Visandi loomine nurjus.

#: Editor.java:2166
#, java-format
{0}\ |\ Arduino\ {1}={0} | Arduino {1}

#: Editor.java:2223 Editor.java:2261
Saving...=Salvestamine...

#: Editor.java:2228 Editor.java:2264
Done\ Saving.=Salvestatud.

#: Editor.java:2270
Save\ Canceled.=Salvestamine katkestatud.

#: Editor.java:2296
#, java-format
Serial\ port\ {0}\ not\ found.\nRetry\ the\ upload\ with\ another\ serial\ port?=Jadaport {0} puudub.\nProovin m\u00f5nda teist porti?

#: Editor.java:2331
Uploading\ to\ I/O\ Board...=I/O plaadile laadimine...

#: Editor.java:2348 Editor.java:2384
Done\ uploading.=Laadimine l\u00f5petatud

#: Editor.java:2356 Editor.java:2392
Upload\ canceled.=Laadimine katkestati

#: Editor.java:2420
Save\ changes\ before\ export?=Salvestan muudatused enne eksportimist?

#: Editor.java:2435
Export\ canceled,\ changes\ must\ first\ be\ saved.=Eksport katkestatud. Muudatused peavad olema enne salvestatud.

#: Editor.java:2457
Burning\ bootloader\ to\ I/O\ Board\ (this\ may\ take\ a\ minute)...=Buudilaaduri I/O plaadile kirjutamine (see v\u00f5ib kesta m\u00f5ni minut)...

#: Editor.java:2463
Done\ burning\ bootloader.=Buudilaadur edukalt kirjutatud.

#: Editor.java:2465 Editor.java:2469 Editor.java:2473
Error\ while\ burning\ bootloader.=Buudilaaduri kirjutamisel tekkis viga.

#: Editor.java:2500
Printing...=Tr\u00fckkimine...

#: Editor.java:2517
Done\ printing.=Tr\u00fckitud.

#: Editor.java:2520
Error\ while\ printing.=Viga tr\u00fckkimisel.

#: Editor.java:2524
Printing\ canceled.=Tr\u00fckkimine katkestati.

#: Editor.java:2572
#, java-format
Bad\ error\ line\:\ {0}=Viga real\: {0}

#: Editor.java:2641
Open\ URL=Ava URL

#: UpdateCheck.java:53
http\://www.arduino.cc/latest.txt=http\://www.arduino.cc/latest.txt

#: UpdateCheck.java:103
A\ new\ version\ of\ Arduino\ is\ available,\nwould\ you\ like\ to\ visit\ the\ Arduino\ download\ page?=Saadaval on uuem versioon Arduinost.\nKas soovid allalaadimislehte k\u00fclastada?

#: UpdateCheck.java:108 Preferences.java:76
Yes=Jah

#: UpdateCheck.java:108 Preferences.java:77
No=Ei

#: UpdateCheck.java:111
Update=Uuenda

#: UpdateCheck.java:118
http\://www.arduino.cc/en/Main/Software=http\://www.arduino.cc/en/Main/Software

#: FindReplace.java:80
Find\:=Otsi\:

#: FindReplace.java:81
Replace\ with\:=Asenda j\u00e4rgnevaga\:

#: FindReplace.java:96
Ignore\ Case=Ignoreeri t\u00e4hesuurust

#: FindReplace.java:105
Wrap\ Around=J\u00e4tkatakse algusest

#: FindReplace.java:120 FindReplace.java:131
Replace\ All=Asenda k\u00f5ik

#: FindReplace.java:121 FindReplace.java:130 Sketch.java:1050
Replace=Asendada

#: FindReplace.java:122 FindReplace.java:129
Replace\ &\ Find=Otsi ja asenda

#: FindReplace.java:123 FindReplace.java:128
Previous=Eelmine

#: FindReplace.java:124 FindReplace.java:127
Find=Otsi

#: SerialMonitor.java:93
Send=Saada

#: SerialMonitor.java:110
Autoscroll=Isekerimine

#: SerialMonitor.java:112
No\ line\ ending=Reavahetust ei lisa

#: SerialMonitor.java:112
Newline=lisa NL (\\n)

#: SerialMonitor.java:112
Carriage\ return=lisa CR (\\r)

#: SerialMonitor.java:112
Both\ NL\ &\ CR=lisa NL+CR (\\r\\n)

#: SerialMonitor.java:130 SerialMonitor.java:133
\ baud=\ boodi

#: Serial.java:147
#, java-format
Serial\ port\ ''{0}''\ already\ in\ use.\ Try\ quiting\ any\ programs\ that\ may\ be\ using\ it.=Jadaport {0} on juba kasutusel. V\u00e4lju programmist, mis seda kasutab.

#: Serial.java:154
#, java-format
Error\ opening\ serial\ port\ ''{0}''.=Viga jadapordi {0} avamisel

#: Serial.java:167
#, java-format
Serial\ port\ ''{0}''\ not\ found.\ Did\ you\ select\ the\ right\ one\ from\ the\ Tools\ >\ Serial\ Port\ menu?=Jadaport {0} puudub. Vali \u00f5ige port men\u00fc\u00fcst T\u00f6\u00f6riistad -> Jadaport

#: Serial.java:424
#, java-format
readBytesUntil()\ byte\ buffer\ is\ too\ small\ for\ the\ {0}\ bytes\ up\ to\ and\ including\ char\ {1}=readBytesUntil() baitide puhver on liiga v\u00e4ike {0} ja rohkema baidi jaoks alates m\u00e4rgist {1}

#: Serial.java:567
#, java-format
Error\ inside\ Serial.{0}()=Viga Serial.{0}() sees

#: tools/AutoFormat.java:91
Auto\ Format=Automaatvormindus

#: tools/AutoFormat.java:913 tools/format/src/AutoFormat.java:54
No\ changes\ necessary\ for\ Auto\ Format.=Automaatvormindus ei vaja muudatusi.

#: tools/AutoFormat.java:919
Auto\ Format\ Canceled\:\ Too\ many\ right\ parentheses.=Automaatvormindus katkestatud\: liiga palju l\u00f5ppevaid sulge.

#: tools/AutoFormat.java:922
Auto\ Format\ Canceled\:\ Too\ many\ left\ parentheses.=Automaatvormindus katkestatud\: liiga palju algavaid sulge.

#: tools/AutoFormat.java:928
Auto\ Format\ Canceled\:\ Too\ many\ right\ curly\ braces.=Automaatvormindus katkestatud\: liiga palju l\u00f5ppevaid looksulge.

#: tools/AutoFormat.java:931
Auto\ Format\ Canceled\:\ Too\ many\ left\ curly\ braces.=Automaatvormindus katkestatud\: liiga palju algavaid looksulge.

#: tools/AutoFormat.java:941
Auto\ Format\ finished.=Automaatvormindus tehtud.

#: tools/FixEncoding.java:41 tools/FixEncoding.java:58
#: tools/FixEncoding.java:79
Fix\ Encoding\ &\ Reload=Paranda kooditabel ning laadi uuesti

#: tools/FixEncoding.java:57
Discard\ all\ changes\ and\ reload\ sketch?=Unusta k\u00f5ik muudatused ning laadi uuesti?

#: tools/FixEncoding.java:77
An\ error\ occurred\ while\ trying\ to\ fix\ the\ file\ encoding.\nDo\ not\ attempt\ to\ save\ this\ sketch\ as\ it\ may\ overwrite\nthe\ old\ version.\ Use\ Open\ to\ re-open\ the\ sketch\ and\ try\ again.\n=Faili kooditabeli muutmisel tekkis viga. \u00c4ra proovi\nseda visandit salvestada kuna see v\u00f5ib olemasoleva\n\u00fcle kirjutada. Ava visand uuesti ning proovi uuesti.

#: tools/Archiver.java:48
Archive\ Sketch=Arhiveeri visand

#: tools/Archiver.java:59
yyMMdd=yyMMdd

#: tools/Archiver.java:74
Couldn't\ archive\ sketch=Visandi arhiveerimine eba\u00f5nnestus

#: tools/Archiver.java:75
Archiving\ the\ sketch\ has\ been\ canceled\ because\nthe\ sketch\ couldn't\ save\ properly.=Visandi arhiveerimine eba\u00f5nnestus kuna seda\nei saanud korralikult salvestada.

#: tools/Archiver.java:109
Archive\ sketch\ as\:=Arhiveeri visand uue nimega\:

#: tools/Archiver.java:139
Archive\ sketch\ canceled.=Visandi arhiveerimine katkestatud.

#: SketchCode.java:83
#, java-format
Error\ while\ loading\ code\ {0}=Koodi laadimise viga {0}

#: SketchCode.java:258
#, java-format
"{0}"\ contains\ unrecognized\ characters.If\ this\ code\ was\ created\ with\ an\ older\ version\ of\ Processing,you\ may\ need\ to\ use\ Tools\ ->\ Fix\ Encoding\ &\ Reload\ to\ updatethe\ sketch\ to\ use\ UTF-8\ encoding.\ If\ not,\ you\ may\ need\ todelete\ the\ bad\ characters\ to\ get\ rid\ of\ this\ warning.="{0}" sisaldab tundmatuid t\u00e4hem\u00e4rke. Kui see kood on loodud vanema versiooniga, saab selle teisendada UTF-8'ks men\u00fc\u00fcst T\u00f6\u00f6riistad -> Paranda kooditabel ning laadi uuesti. Teine variant on vigased m\u00e4rgid k\u00e4sitsi kustutada.

#: Sketch.java:278 Sketch.java:307 Sketch.java:581 Sketch.java:970
Sketch\ is\ Read-Only=Visand on kirjutuskaitsega

#: Sketch.java:279 Sketch.java:308 Sketch.java:582 Sketch.java:971
Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ the\ sketch\ in\ another\ location,\nand\ try\ again.=M\u00f5ned failid on kirjutuskaitsega. Proovi uuesti\nsalvestades visand kuhugi mujale.

#: Sketch.java:286
Name\ for\ new\ file\:=Uue faili nimi\:

#: Sketch.java:298
Sketch\ is\ Untitled=Visand on pealkirjastamata

#: Sketch.java:299
How\ about\ saving\ the\ sketch\ first\ \nbefore\ trying\ to\ rename\ it?=Kuidas oleks, kui salvestaks visandi \nenne nime muutmist?

#: Sketch.java:359 Sketch.java:366 Sketch.java:377
Problem\ with\ rename=Probleem nime muutmisega

#: Sketch.java:360
The\ name\ cannot\ start\ with\ a\ period.=Nimi ei v\u00f5i alata puntiga.

#: Sketch.java:368
#, java-format
".{0}"\ is\ not\ a\ valid\ extension.=".{0}" pole lubatud laiend.

#: Sketch.java:378
The\ main\ file\ can't\ use\ an\ extension.\n(It\ may\ be\ time\ for\ your\ to\ graduate\ to\ a\n"real"\ programming\ environment)=P\u00f5hifail ei tohi kasutada laiendit.\n

#: Sketch.java:400 Sketch.java:414 Sketch.java:423 Sketch.java:863
Nope=Vabandust

#: Sketch.java:402
#, java-format
A\ file\ named\ "{0}"\ already\ exists\ in\ "{1}"="{1}" kasutas on fail nimega "{0}" juba olemas

#: Sketch.java:415
You\ can't\ have\ a\ .cpp\ file\ with\ the\ same\ name\ as\ the\ sketch.=Sama nimega visand on juba olemas. .cpp faili nimi peab olema erinev.

#: Sketch.java:425
You\ can't\ rename\ the\ sketch\ to\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.=Visandit ei saa nimetada "{0}" sest\nsellise nimega .cpp fail on juba olemas.

#: Sketch.java:459
Cannot\ Rename=\u00dcmbernimetamine nurjus

#: Sketch.java:461
#, java-format
Sorry,\ a\ sketch\ (or\ folder)\ named\ "{0}"\ already\ exists.=Kahjuks on "{0}" nimega visand v\u00f5i kaust juba olemas.

#: Sketch.java:479
Could\ not\ rename\ the\ sketch.\ (0)=Visandi \u00fcmbernimetamine nurjus. (0)

#: Sketch.java:487 Sketch.java:532
#, java-format
Could\ not\ rename\ "{0}"\ to\ "{1}"="{0}" pole v\u00f5imalik "{1}"-ks \u00fcmber nimetada.

#: Sketch.java:500
Could\ not\ rename\ the\ sketch.\ (1)=Visandi \u00fcmbernimetamine nurjus. (1)

#: Sketch.java:507
Could\ not\ rename\ the\ sketch.\ (2)=Visandi \u00fcmbernimetamine nurjus. (2)

#: Sketch.java:544
createNewFile()\ returned\ false=createNewFile() eba\u00f5nnestus

#: Sketch.java:591
Are\ you\ sure\ you\ want\ to\ delete\ this\ sketch?=Oled kindel, et soovid kustutada selle visandi?

#: Sketch.java:592
#, java-format
Are\ you\ sure\ you\ want\ to\ delete\ "{0}"?=Oled kindel, et soovid kustutada "{0}"?

#: Sketch.java:595 EditorHeader.java:314
Delete=Kustuta

#: Sketch.java:620
Couldn't\ do\ it=Ei saanud seda teha

#: Sketch.java:621
#, java-format
Could\ not\ delete\ "{0}".="{0}" pole v\u00f5imalik kustutada.

#: Sketch.java:651
removeCode\:\ internal\ error..\ could\ not\ find\ code=removeCode\: sisemine viga.. ei leidnud koodi

#: Sketch.java:724
Sketch\ is\ read-only=Visand on kirjutuskaitsega

#: Sketch.java:725
Some\ files\ are\ marked\ "read-only",\ so\ you'll\nneed\ to\ re-save\ this\ sketch\ to\ another\ location.=M\u00f5ned failid on kirjutuskaitsega.\nPead salvestama visandi kuhugi mujale.

#: Sketch.java:743
In\ Arduino\ 1.0,\ the\ default\ file\ extension\ has\ changed\nfrom\ .pde\ to\ .ino.\ \ New\ sketches\ (including\ those\ created\nby\ "Save-As"\ will\ use\ the\ new\ extension.\ \ The\ extension\nof\ existing\ sketches\ will\ be\ updated\ on\ save,\ but\ you\ can\ndisable\ this\ in\ the\ Preferences\ dialog.\n\nSave\ sketch\ and\ update\ its\ extension?=Arduino versioonist 1.0 alates on visandite laiendiks\n.pde asemel .ino. Uued visandid (sh uue nimega salvestamine)\nsaavad uue laiendi. Olemasolevate visandite laiendid\nuuendatdakse salvestamisel.\nVajadusel saab selle keelata Eelistuste valikust.\n\nKas salvestan visandi ning uuendan laiendi?

#: Sketch.java:750
.pde\ ->\ .ino=.pde -> .ino

#: Sketch.java:829
Save\ sketch\ folder\ as...=Salvesta visand uude kausta...

#: Sketch.java:865
You\ can't\ save\ the\ sketch\ as\ "{0}"\nbecause\ the\ sketch\ already\ has\ a\ .cpp\ file\ with\ that\ name.=Visandit ei saa salvestada nimega "{0}" sest\nsellise nimega .cpp fail on juba olemas.

#: Sketch.java:886
How\ very\ Borges\ of\ you=Maakera sees on maakera

#: Sketch.java:887
You\ cannot\ save\ the\ sketch\ into\ a\ folder\ninside\ itself.\ This\ would\ go\ on\ forever.=Sa ei saa salvestada visandit kausta,\nmis on sama kausta sees.

#: Sketch.java:979
Select\ an\ image\ or\ other\ data\ file\ to\ copy\ to\ your\ sketch=Vali pilt v\u00f5i muu andmefail visandi juurde kopeerimiseks

#: Sketch.java:1047
#, java-format
Replace\ the\ existing\ version\ of\ {0}?=Kas vaherada {0} olemasolev versioon?

#: Sketch.java:1069 Sketch.java:1092
Error\ adding\ file=Viga faili lisamisel

#: Sketch.java:1070
#, java-format
Could\ not\ delete\ the\ existing\ ''{0}''\ file.=Ei saa kustutada olemasolevat faili "{0}".

#: Sketch.java:1078
You\ can't\ fool\ me=Mind sa ei lollita

#: Sketch.java:1079
This\ file\ has\ already\ been\ copied\ to\ the\nlocation\ from\ which\ where\ you're\ trying\ to\ add\ it.\nI\ ain't\ not\ doin\ nuthin'.=See fail on juba kopeeritud kohta, kust sa seda\nkopeerida \u00fcritad. Seega ei pea ma midagi tegema.

#: Sketch.java:1093
#, java-format
Could\ not\ add\ ''{0}''\ to\ the\ sketch.=''{0}'' ei saa visandisse lisada.

#: Sketch.java:1393 Sketch.java:1424
Build\ folder\ disappeared\ or\ could\ not\ be\ written=Kompileerimise kaust on haihtunud v\u00f5i pole kirjutatav

#: Sketch.java:1408
Could\ not\ find\ main\ class=Could not find main class

#: Sketch.java:1433
#, java-format
Uncaught\ exception\ type\:\ {0}=Uncaught exception type\: {0}

#: Sketch.java:1465
#, java-format
Problem\ moving\ {0}\ to\ the\ build\ folder=Probleem {0} liigutamisega kompileerimiskausta

#: Sketch.java:1661
Uploading...=\u00dcleslaadimine...

#: Sketch.java:1684
#, java-format
Binary\ sketch\ size\:\ {0}\ bytes\ (of\ a\ {1}\ byte\ maximum)=Binaarse visandi suurus on {0} baiti ({1} maksimumist)

#: Sketch.java:1689
Couldn't\ determine\ program\ size\:\ {0}=Programmi suurust ei saanud kindlaks teha\: {0}

#: Sketch.java:1694
Sketch\ too\ big;\ see\ http\://www.arduino.cc/en/Guide/Troubleshooting\#size\ for\ tips\ on\ reducing\ it.=Visand on liiga suur. Vaata http\://www.arduino.cc/en/Guide/Troubleshooting\#size lehelt n\u00e4pun\u00e4iteid selle v\u00e4hendamiseks.

#: Sketch.java:1754
Missing\ the\ */\ from\ the\ end\ of\ a\ /*\ comment\ */=/* kommentaar */ l\u00f5pust puudub */

#: Sketch.java:1796
Sketch\ Disappeared=Visand on haihtunud

#: Sketch.java:1797
The\ sketch\ folder\ has\ disappeared.\n\ Will\ attempt\ to\ re-save\ in\ the\ same\ location,\nbut\ anything\ besides\ the\ code\ will\ be\ lost.=Visandi kaust on haihtunud.\nP\u00fc\u00fcan samasse kohta uuesti salvestada,\nkuid k\u00f5ik peale selle koodi on kadunud.

#: Sketch.java:1810
Could\ not\ re-save\ sketch=Visandi uuesti salvestamine eba\u00f5nnestus

#: Sketch.java:1811
Could\ not\ properly\ re-save\ the\ sketch.\ You\ may\ be\ in\ trouble\ at\ this\ point,\nand\ it\ might\ be\ time\ to\ copy\ and\ paste\ your\ code\ to\ another\ text\ editor.=Visandi uuesti salvestamine nurjus. Siin on tegemist t\u00f5sise probleemiga.\nProovi l\u00f5igata ning kleepida oma kood m\u00f5nda teisse tekstiredaktorisse.

#: Sketch.java:2060
The\ sketch\ name\ had\ to\ be\ modified.\ Sketch\ names\ can\ only\ consist\nof\ ASCII\ characters\ and\ numbers\ (but\ cannot\ start\ with\ a\ number).\nThey\ should\ also\ be\ less\ less\ than\ 64\ characters\ long.=Visandi nime tuleb muuta. Nimes tohivad olla vaid\nASCII t\u00e4hed ning numbrid (algama peab t\u00e4hega).\nNimi peab olema l\u00fchem kui 64 m\u00e4rki.

#: debug/Uploader.java:52
https\://developer.berlios.de/bugs/?group_id\=3590=https\://developer.berlios.de/bugs/?group_id\=3590

#: debug/Uploader.java:54 debug/Compiler.java:43
#, java-format
Compiler\ error,\ please\ submit\ this\ code\ to\ {0}=Kompilaatori viga, saada see kood {0}

#: debug/Uploader.java:199
#, java-format
the\ selected\ serial\ port\ {0}\ does\ not\ exist\ or\ your\ board\ is\ not\ connected=valitud jadaporti {0} ei eksisteeri v\u00f5i plaat on \u00fchendamata

#: debug/Uploader.java:203
Device\ is\ not\ responding,\ check\ the\ right\ serial\ port\ is\ selected\ or\ RESET\ the\ board\ right\ before\ exporting=Seade ei vasta. Kontrolli, et valitud oleks \u00f5ige jadaport v\u00f5i vajuta enne eksportimist RESET nuppu

#: debug/Uploader.java:209
Problem\ uploading\ to\ board.\ \ See\ http\://www.arduino.cc/en/Guide/Troubleshooting\#upload\ for\ suggestions.=Probleem plaadile \u00fcleslaadimisega. http\://www.arduino.cc/en/Guide/Troubleshooting\#upload leiad soovitusi probleemi lahendamiseks.

#: debug/Uploader.java:213
Wrong\ microcontroller\ found.\ \ Did\ you\ select\ the\ right\ board\ from\ the\ Tools\ >\ Board\ menu?=Mikrokontroller on vale t\u00fc\u00fcpi. Kas sa valisid T\u00f6\u00f6riistad > Plaat alt \u00f5ige plaadi?

#: debug/Compiler.java:41
http\://code.google.com/p/arduino/issues/list=http\://code.google.com/p/arduino/issues/list

#: debug/Compiler.java:79
No\ board\ selected;\ please\ choose\ a\ board\ from\ the\ Tools\ >\ Board\ menu.=Plaat pole valitud. Palun tee oma valik men\u00fc\u00fcs T\u00f6\u00f6riistad > Plaat.

#: debug/Compiler.java:422
#, java-format
{0}\ returned\ {1}={0} tagastas {1}

#: debug/Compiler.java:426
Error\ compiling.=Kompileerimise viga.

#: debug/Compiler.java:465
Please\ import\ the\ SPI\ library\ from\ the\ Sketch\ >\ Import\ Library\ menu.=Impordi SPI teek men\u00fc\u00fcst Visand > Impordi teek

#: debug/Compiler.java:466
\nAs\ of\ Arduino\ 0019,\ the\ Ethernet\ library\ depends\ on\ the\ SPI\ library.\nYou\ appear\ to\ be\ using\ it\ or\ another\ library\ that\ depends\ on\ the\ SPI\ library.\n\n=\nAlates Arduino 0019 on Etherneti teegi kasutamiseks vaja SPI teeki.\nPaistab, et sa kasutad seda v\u00f5i m\u00f5nda muud teeki, mis s\u00f5ltub SPI teegist.\n\n

#: debug/Compiler.java:471
The\ 'BYTE'\ keyword\ is\ no\ longer\ supported.="BYTE" v\u00f5tmes\u00f5na pole enam toetatud.

#: debug/Compiler.java:472
\nAs\ of\ Arduino\ 1.0,\ the\ 'BYTE'\ keyword\ is\ no\ longer\ supported.\nPlease\ use\ Serial.write()\ instead.\n\n=\nAlates Arduino 1.0 ei kasutata enam v\u00f5tmes\u00f5na "BYTE".\nPalun kasuta Serial.write() selle asemel.\n\n

#: debug/Compiler.java:477
The\ Server\ class\ has\ been\ renamed\ EthernetServer.=Klass Server on n\u00fc\u00fcd EthernetServer.

#: debug/Compiler.java:478
\nAs\ of\ Arduino\ 1.0,\ the\ Server\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetServer.\n\n=\nAlates Arduino 1.0 on Etherneti teegis olev klass Server nimetatud \u00fcmber EthernetServer.\n\n

#: debug/Compiler.java:483
The\ Client\ class\ has\ been\ renamed\ EthernetClient.=Klass Client on n\u00fc\u00fcd EthernetClient.

#: debug/Compiler.java:484
\nAs\ of\ Arduino\ 1.0,\ the\ Client\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetClient.\n\n=\nAlates Arduino 1.0 on Etherneti teegis olev klass Client nimetatud \u00fcmber EthernetClient.\n\n

#: debug/Compiler.java:489
The\ Udp\ class\ has\ been\ renamed\ EthernetUdp.=Klass Udp on nimetatud \u00fcmber EthernetUdp.

#: debug/Compiler.java:490
\nAs\ of\ Arduino\ 1.0,\ the\ Udp\ class\ in\ the\ Ethernet\ library\ has\ been\ renamed\ to\ EthernetClient.\n\n=\nAlates Arduino 1.0 on Etherneti teegis olev klass Udp nimetatud \u00fcmber EthernetUdp.\n\n

#: debug/Compiler.java:495
Wire.send()\ has\ been\ renamed\ Wire.write().=Wire.send() on muudetud Wire.write().

#: debug/Compiler.java:496
\nAs\ of\ Arduino\ 1.0,\ the\ Wire.send()\ function\ was\ renamed\ to\ Wire.write()\ for\ consistency\ with\ other\ libraries.\n\n=\nAlates Arduino 1.0 on Wire.send() nimetatud \u00fcmber Wire.write() tagamaks sarnase nimetamise teiste teekidega.\n\n

#: debug/Compiler.java:501
Wire.receive()\ has\ been\ renamed\ Wire.read().=Wire.receive() on muudetud Wire.read().

#: debug/Compiler.java:502
\nAs\ of\ Arduino\ 1.0,\ the\ Wire.receive()\ function\ was\ renamed\ to\ Wire.read()\ for\ consistency\ with\ other\ libraries.\n\n=\nAlates Arduino 1.0 on Wire.receive() nimetatud \u00fcmber Wire.read() tagamaks sarnase nimetamise teiste teekidega.\n\n

#: EditorConsole.java:152
Console\ Error=Konsooli viga

#: EditorConsole.java:153
A\ problem\ occurred\ while\ trying\ to\ open\ the\nfiles\ used\ to\ store\ the\ console\ output.=Konsooli v\u00e4ljundi salvestamiseks vajaliku faili avamisel tekkis viga.

#: Base.java:184
Non-fatal\ error\ while\ setting\ the\ Look\ &\ Feel.=Mitte-saatsulik viga v\u00e4limuse seadmises.

#: Base.java:185
The\ error\ message\ follows,\ however\ Arduino\ should\ run\ fine.=Kuigi Arduino l\u00e4ks ilusti k\u00e4ima, tekkis mingi viga.

#: Base.java:220
Problem\ Setting\ the\ Platform=Platvormi valimise viga

#: Base.java:221
An\ unknown\ error\ occurred\ while\ trying\ to\ load\nplatform-specific\ code\ for\ your\ machine.=Sinu masina platvormip\u00f5hise koodi laadimisel\ntekkis tundmatu viga.

#: Base.java:232
Please\ install\ JDK\ 1.5\ or\ later=Palun paigalda JDK 1.5 v\u00f5i hilisem

#: Base.java:233
Arduino\ requires\ a\ full\ JDK\ (not\ just\ a\ JRE)\nto\ run.\ Please\ install\ JDK\ 1.5\ or\ later.\nMore\ information\ can\ be\ found\ in\ the\ reference.=Arduino vajab t\u00f6\u00f6ks kogu JDK paigaldamist (mitte ainult JRE).\nPalun paigalda JDK versioon 1.5 v\u00f5i hilisem.\nRohkem infot leiad viidetest.

#: Base.java:257
Sketchbook\ folder\ disappeared=Visandite kaust on haihtunud

#: Base.java:258
The\ sketchbook\ folder\ no\ longer\ exists.\nArduino\ will\ switch\ to\ the\ default\ sketchbook\nlocation,\ and\ create\ a\ new\ sketchbook\ folder\ if\nnecessary.\ Arduino\ will\ then\ stop\ talking\ about\nhimself\ in\ the\ third\ person.=Visandite kausta pole enam.\nArduino hakkab kasutama vaikimisi kausta ning\nvajadusel tekitab sinna uue visandite kausta.

#: Base.java:532
Time\ for\ a\ Break=Aeg puhata

#: Base.java:533
You've\ reached\ the\ limit\ for\ auto\ naming\ of\ new\ sketches\nfor\ the\ day.\ How\ about\ going\ for\ a\ walk\ instead?=Sa oled saavutanud \u00fchel p\u00e4eval loodavate automaatsete\nnimede piiri. Kuidas hoopis oleks v\u00e4ikese jalutusk\u00e4iguga?

#: Base.java:537
Sunshine=S\u00e4rasilm

#: Base.java:538
No\ really,\ time\ for\ some\ fresh\ air\ for\ you.=T\u00f5esti oleks aeg natuke v\u00e4rsket \u00f5hku hingata.

#: Base.java:633
Open\ an\ Arduino\ sketch...=Ava Arduino visand...

#: Base.java:772
<html>\ <head>\ <style\ type\="text/css">b\ {\ font\:\ 13pt\ "Lucida\ Grande"\ }p\ {\ font\:\ 11pt\ "Lucida\ Grande";\ margin-top\:\ 8px\ }</style>\ </head><b>Are\ you\ sure\ you\ want\ to\ Quit?</b><p>Closing\ the\ last\ open\ sketch\ will\ quit\ Arduino.=<html> <head> <style type\="text/css">b { font\: 13pt "Lucida Grande" }p { font\: 11pt "Lucida Grande"; margin-top\: 8px }</style> </head><b>Oled sa kindel, et soovid v\u00e4ljuda?</b><p>Viimase avatud visandi sulgemisel suletakse ka Arduino keskkond.

#: Base.java:970
Contributed=Toetajad

#: Base.java:1095
Sketch\ Does\ Not\ Exist=Visandit ei ole olemas

#: Base.java:1096
The\ selected\ sketch\ no\ longer\ exists.\nYou\ may\ need\ to\ restart\ Arduino\ to\ update\nthe\ sketchbook\ menu.=Valitud visandit ei ole enam.\nVisandite men\u00fc\u00fc uuendamiseks\nk\u00e4ivita Arduino uuesti.

#: Base.java:1125
#, java-format
The\ sketch\ "{0}"\ cannot\ be\ used.\nSketch\ names\ must\ contain\ only\ basic\ letters\ and\ numbers\n(ASCII-only\ with\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number).\nTo\ get\ rid\ of\ this\ message,\ remove\ the\ sketch\ from\n{1}=Visandit "{0}" ei saa kasutada.\nVisandite nimed nimed tohivad sisaldada ainult ASCII t\u00e4hti\nja numbreid ning peavad algama t\u00e4hega.\nSellest teatest saab lahti ainult "{1}" kaustast\nvisandi kustutamisega.

#: Base.java:1132
Ignoring\ sketch\ with\ bad\ name=Vigase nimega visandi eriamine

#: Base.java:1202
#, java-format
The\ library\ "{0}"\ cannot\ be\ used.\nLibrary\ names\ must\ contain\ only\ basic\ letters\ and\ numbers.\n(ASCII\ only\ and\ no\ spaces,\ and\ it\ cannot\ start\ with\ a\ number)=Teeki "{0}" ei saa kasutada.\nTeekide nimed tohivad sisaldada ainult ASCII t\u00e4hti ja\nnumbreid ning peavad algama t\u00e4hega.

#: Base.java:1207
Ignoring\ bad\ library\ name=Vigase nimega teegi eiramine

#: Base.java:1432
Problem\ getting\ data\ folder=Probleem andmekausta nime leidmisega

#: Base.java:1433
Error\ getting\ the\ Arduino\ data\ folder.=Arduino andmekausta nime leidmise viga.

#: Base.java:1440
Settings\ issues=Probleem seadetega

#: Base.java:1441
Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ settings.=Ei saa Arduinot k\u00e4ivitada kuna seadete kausta\nloomine ei \u00f5nnestunud.

#: Base.java:1602
You\ forgot\ your\ sketchbook=Sa unustasid oma visandid

#: Base.java:1603
Arduino\ cannot\ run\ because\ it\ could\ not\ncreate\ a\ folder\ to\ store\ your\ sketchbook.=Ei saa Arduinot k\u00e4ivitada kuna visandite kausta\nloomine ei \u00f5nnestunud.

#: Base.java:1623
Select\ (or\ create\ new)\ folder\ for\ sketches...=Vali (v\u00f5i loo uus) kaust visandite jaoks...

#: Base.java:1647
Problem\ Opening\ URL=URL avamine eba\u00f5nnestus

#: Base.java:1648
#, java-format
Could\ not\ open\ the\ URL\n{0}=URL avamine eba\u00f5nnestus\n{0}

#: Base.java:1671
Problem\ Opening\ Folder=Kausta avamine eba\u00f5nnestus

#: Base.java:1672
#, java-format
Could\ not\ open\ the\ folder\n{0}=Kausta avamine eba\u00f5nnestus\n{0}

#: Base.java:1785
Guide_MacOSX.html=Guide_MacOSX.html

#: Base.java:1787
Guide_Windows.html=Guide_Windows.html

#: Base.java:1789
http\://www.arduino.cc/playground/Learning/Linux=http\://www.arduino.cc/playground/Learning/Linux

#: Base.java:1794
index.html=index.html

#: Base.java:1799
Guide_Environment.html=Guide_Environment.html

#: Base.java:1804
environment=T\u00f6\u00f6keskkond

#: Base.java:1804
platforms.html=platforms.html

#: Base.java:1809
Guide_Troubleshooting.html=Guide_Troubleshooting.html

#: Base.java:1814
FAQ.html=FAQ.html

#: Base.java:1826
Message=Teade

#: Base.java:1842
Warning=Hoiatus

#: Base.java:2196
#, java-format
Could\ not\ remove\ old\ version\ of\ {0}=Ei saanud {0} vana versiooni eemaldada

#: Base.java:2206
#, java-format
Could\ not\ replace\ {0}={0} pole v\u00f5imalik asendada

#: Base.java:2247 Base.java:2270
#, java-format
Could\ not\ delete\ {0}={0} pole v\u00f5imalik kustutada.

#: EditorHeader.java:292
New\ Tab=Uus kaart

#: EditorHeader.java:300
Rename=Nimeta \u00fcmber

#: EditorHeader.java:326
Previous\ Tab=Eelmine kaart

#: EditorHeader.java:340
Next\ Tab=J\u00e4rgmine kaart

#: EditorToolbar.java:41 EditorToolbar.java:46
Verify=Kontrolli

#: EditorToolbar.java:41
Open=Ava

#: EditorToolbar.java:46
New\ Editor\ Window=Uus redaktoriaken

#: EditorToolbar.java:46
Open\ in\ Another\ Window=Ava uues aknas

#: Platform.java:167
No\ launcher\ available=Veebilehitseja puudub

#: Platform.java:168
Unspecified\ platform,\ no\ launcher\ available.\nTo\ enable\ opening\ URLs\ or\ folders,\ add\ a\ \n"launcher\=/path/to/app"\ line\ to\ preferences.txt=Tundmatu platvorm, veebilehitseja puudub.\nVeebiaadresside avamiseks lisa\n"launcher\=/kaust/brauser" rida preferences.txt faili.

#: Theme.java:52
Could\ not\ read\ color\ theme\ settings.\nYou'll\ need\ to\ reinstall\ Processing.=Ei saa avada v\u00e4rviteema seadeid.\nProcessing tuleb uuesti paigaldada.

#: Preferences.java:80
Browse=Sirvi

#: Preferences.java:83
System\ Default=S\u00fcsteemi vaikimisi keel

#: Preferences.java:84
!Arabic=

#: Preferences.java:85
!Aragonese=

#: Preferences.java:86
Catalan=Katalaani

#: Preferences.java:87
Chinese\ Simplified=Hiina (lihtsustatud)

#: Preferences.java:88
Chinese\ Traditional=Traditsiooniline Hiina

#: Preferences.java:89
Danish=Taani

#: Preferences.java:90
Dutch=Hollandi

#: Preferences.java:91
English=Inglise

#: Preferences.java:92
!Estonian=

#: Preferences.java:93
French=Prantsuse

#: Preferences.java:94
Filipino=Filipiini

#: Preferences.java:95
Galician=Galeegi

#: Preferences.java:96
German=Saksa

#: Preferences.java:97
Greek=Kreeka

#: Preferences.java:98
Hungarian=Ungari

#: Preferences.java:99
!Indonesian=

#: Preferences.java:100
Italian=Itaalia

#: Preferences.java:101
Japanese=Jaapani

#: Preferences.java:102
!Korean=

#: Preferences.java:103
Latvian=L\u00e4ti

#: Preferences.java:104
!Lithuaninan=

#: Preferences.java:105
Persian=P\u00e4rsia

#: Preferences.java:106
!Polish=

#: Preferences.java:107 Preferences.java:108
Portuguese=Portugali

#: Preferences.java:109
Romanian=Rumeenia

#: Preferences.java:110
Russian=Vene

#: Preferences.java:111
Spanish=Hispaania

#: Preferences.java:210
Could\ not\ read\ default\ settings.\nYou'll\ need\ to\ reinstall\ Arduino.=Ei saa avada vaikimisi seadeid.\nArduino tuleb uuesti paigaldada.

#: Preferences.java:242
#, java-format
Could\ not\ read\ preferences\ from\ {0}=Ei saa lugeda eelistusi failist {0}

#: Preferences.java:261
Error\ reading\ preferences=Viga eelistuste lugemisel

#: Preferences.java:263
#, java-format
Error\ reading\ the\ preferences\ file.\ Please\ delete\ (or\ move)\n{0}\ and\ restart\ Arduino.=Viga eelistuste faili lugemisel. Palun kustuta (v\u00f5i t\u00f5sta\nmujale) {0} ning k\u00e4ivita Arduino uuesti.

#: Preferences.java:299
Sketchbook\ location\:=Visandite asukoht\:

#: Preferences.java:314
Select\ new\ sketchbook\ location=Vali uus visandite kaust

#: Preferences.java:337
Editor\ language\:\ =Tekstiredaktori keel\:

#: Preferences.java:342 Preferences.java:358
\ \ (requires\ restart\ of\ Arduino)=\  (vajab Arduino taask\u00e4ivitamist)

#: Preferences.java:354
Editor\ font\ size\:\ =Tekstiredaktori kirja suurus\:

#: Preferences.java:371
Show\ verbose\ output\ during\:\ =N\u00e4ita detailsemat v\u00e4ljndit\:

#: Preferences.java:373
compilation\ =kopileerimise ajal

#: Preferences.java:375
upload=\u00fcleslaadimise ajal

#: Preferences.java:384
Verify\ code\ after\ upload=Kontrolli koodi peale \u00fcleslaadimist

#: Preferences.java:393
Use\ external\ editor=Kasuta v\u00e4list redaktorit

#: Preferences.java:403
Check\ for\ updates\ on\ startup=K\u00e4ivitamisel kontrolli uuendusi

#: Preferences.java:412
Update\ sketch\ files\ to\ new\ extension\ on\ save\ (.pde\ ->\ .ino)=Salvestamisel uuenda visandite laiendit (.pde -> .ino)

#: Preferences.java:423
Automatically\ associate\ .ino\ files\ with\ Arduino=Seo .ino laiend automaatselt Arduinoga

#: Preferences.java:433
More\ preferences\ can\ be\ edited\ directly\ in\ the\ file=Rohkemate eelistuste muutmiseks muuda neid otse failis

#: Preferences.java:462
(edit\ only\ when\ Arduino\ is\ not\ running)=(Arduino ei tohi muutmise ajal k\u00e4ia)

#: Preferences.java:609
#, java-format
ignoring\ invalid\ font\ size\ {0}=vigase fondi suuruse "{0}" eiramine