/*
 * Copyright (c) 2008, Google Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the 
 *    distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#ifndef __ASM_ARCH_MSM7200_UART_H
#define __ASM_ARCH_MSM7200_UART_H

#define MSM_UART1_BASE 0xA9A00000
#define MSM_UART2_BASE 0xA9B00000
#define MSM_UART3_BASE 0xA9C00000

#define UART_MR1         0x0000

#define UART_MR1_AUTO_RFR_LEVEL0(n) (((n) & 0x3f) << 8)
#define UART_MR1_RX_RDY_CTL    (1 << 7)
#define UART_MR1_CTS_CTL       (1 << 6)
#define UART_MR1_AUTO_RFR_LEVEL1(n) ((n) & 0x3f)

#define UART_MR2         0x0004
#define UART_MR2_ERROR_MODE        (1 << 6)
#define UART_MR2_BITS_PER_CHAR_5   (0 << 4)
#define UART_MR2_BITS_PER_CHAR_6   (1 << 4)
#define UART_MR2_BITS_PER_CHAR_7   (2 << 4)
#define UART_MR2_BITS_PER_CHAR_8   (3 << 4)
#define UART_MR2_STOP_BIT_LEN_0563 (0 << 2)
#define UART_MR2_STOP_BIT_LEN_1000 (1 << 2)
#define UART_MR2_STOP_BIT_LEN_1563 (2 << 2)
#define UART_MR2_STOP_BIT_LEN_2000 (3 << 2)
#define UART_MR2_PARITY_MODE_NONE  (0)
#define UART_MR2_PARITY_MODE_ODD   (1)
#define UART_MR2_PARITY_MODE_EVEN  (2)
#define UART_MR2_PARITY_MODE_SPACE (3)

#define UART_CSR         0x0008
#define UART_CSR_115200  0xFF
#define UART_CSR_57600   0xEE
#define UART_CSR_38400   0xDD
#define UART_CSR_19200   0xBB

#define UART_TF          0x000C

#define UART_CR          0x0010
#define UART_CR_CMD_NULL           (0 << 4)
#define UART_CR_CMD_RESET_RX       (1 << 4)
#define UART_CR_CMD_RESET_TX       (2 << 4)
#define UART_CR_CMD_RESET_ERR      (3 << 4)
#define UART_CR_CMD_RESET_BCI      (4 << 4)
#define UART_CR_CMD_START_BREAK    (5 << 4)
#define UART_CR_CMD_STOP_BREAK     (6 << 4)
#define UART_CR_CMD_RESET_CTS_N    (7 << 4)
#define UART_CR_CMD_PACKET_MODE    (9 << 4)
#define UART_CR_CMD_MODE_RESET     (12<< 4)
#define UART_CR_CMD_SET_RFR_N      (13<< 4)
#define UART_CR_CMD_RESET_RFR_ND   (14<< 4)
#define UART_CR_TX_DISABLE         (1 << 3)
#define UART_CR_TX_ENABLE          (1 << 3)
#define UART_CR_RX_DISABLE         (1 << 3)
#define UART_CR_RX_ENABLE          (1 << 3)

#define UART_IMR         0x0014
#define UART_IMR_RXLEV (1 << 4)
#define UART_IMR_TXLEV (1 << 0)

#define UART_IPR         0x0018
#define UART_TFWR        0x001C
#define UART_RFWR        0x0020
#define UART_HCR         0x0024

#define UART_MREG        0x0028
#define UART_NREG        0x002C
#define UART_DREG        0x0030
#define UART_MNDREG      0x0034
#define UART_IRDA        0x0038
#define UART_MISR_MODE   0x0040
#define UART_MISR_RESET  0x0044
#define UART_MISR_EXPORT 0x0048
#define UART_MISR_VAL    0x004C
#define UART_TEST_CTRL   0x0050

#define UART_SR          0x0008
#define UART_SR_HUNT_CHAR      (1 << 7)
#define UART_SR_RX_BREAK       (1 << 6)
#define UART_SR_PAR_FRAME_ERR  (1 << 5)
#define UART_SR_OVERRUN        (1 << 4)
#define UART_SR_TX_EMPTY       (1 << 3)
#define UART_SR_TX_READY       (1 << 2)
#define UART_SR_RX_FULL        (1 << 1)
#define UART_SR_RX_READY       (1 << 0)

#define UART_RF          0x000C
#define UART_MISR        0x0010
#define UART_ISR         0x0014


#endif